If you crossed Walter Matthau with Howdy Doody you would come out with someone that would remind you of Bob Kennedy. All right. Bob Kennedy looked more like Walter Matthau than he did Howdy Doody, but I could tell that when Bob was younger, even though he didn’t have red hair and freckles, I could picture him as a little boy playing with his stick horse wearing a cowboy hat, and to me he would have looked a lot like Howdy Doody…
The day I first met Bob Kennedy I instantly fell in love with him. He was an electrician at the Power Plant in Midwest City and I was there on overhaul for three months during the fall of 1985. Bob was assigned to be our acting foreman while Arthur Hammond and I were there for a major overhaul on Unit 5. — Yeah. Five. They actually had 7, but all of them weren’t operational at the time.
Actually, I think it was Unit 4 that was a small generator that came from a submarine. — Half of the plant was like a museum. I used to park at the far end of the plant just so that I could walk through the museum each morning on my way to the electric shop. I think years later they may have torn that part of the plant down, which should have been illegal since to me it easily was a historical monument.
I called this post “Bobbin’ Along with Bob Kennedy” because Bob was tall and when he walked he sort of lunged forward and walked as if he was a giant walking through a forest that was only knee deep to himself. Bob had been an electrician for over 35 years. I know this because one of the phrases he would often say was, “I’ve been doin’ it this way for 35 years!”
He had some other phrases, that I will probably mention in a few minutes. First I want to tell you about the relationship I had with Bob…. So, often in the morning after the morning steam horn would go off signalling that it was time to go to work (yeah… .isn’t that cool? A horn powered by steam would go off when it was time to go to work! My gosh… That horn alone was a monument of the 1930’s each morning when I heard it!),
Bob would come out of the office to where I was standing in the shop and say, “Kev. Follow me. I’ll show you what you’re goin’ ta be workin’ on today. Then he would head for the door. I would follow along behind him. I could tell that he preferred that I walk behind him. When I would walk faster, he would spread his lanky legs even farther to keep me one step behind him… so I quickly assumed my place two paces behind Bob.
He would have these large strides when he walked that would cause his body to move in a left and right motion where his arms were swinging at his side. I loved everything about Bob. I loved the way he talked… I loved the way he walked… I wished that I could be a miniature Bob. So, I started to imitate him.
As Bob would walk across the Turbine-Generator floor toward Unit 5 from Unit 7 (where the electric shop was located)), I would follow along two paces behind him trying my best to walk just like him. I would make very long strides to match Bob’s. I would swing my arms and lean left and right as I walked just like Bob. Bob was my hero and I wanted to let everyone know that I loved Bob and I wanted to be as much like Bob as I possibly could. So, as I walked I had a tremendous grin on my face. My expression was full of the satisfaction of knowing that I was literally following in Bob’s footsteps!
Operators and other maintenance workers that would see us instantly understood my intentions as they would grin, or laugh, or fall down in a total convulsion of uncontrollable laughter, sharing in my elation of being a miniature Bob.
I wish I could say that my time with Bob was one of total contentment and joy at being a miniature Bob that had “done it this way for 35 years”, but there were some setbacks. The first problem was that Arthur Hammond was with me on overhaul, and there was one major flaw in this combination….. Arthur liked to argue. See my post from two weeks ago called “Power Plant Arguments With Arthur Hammond“.
Before I go into the contention part, I want to first tell you about my second best Bob Kennedy Phrase. It is…. “I have a tool for that.”. You see. At this older gas plant where Bob Kennedy had spent the greater portion of his life, he had created a tool for just about every difficult job at the plant to make it easier.
Often in the morning when Bob would show me the job that I was going to be performing for the day, he would qualify it by saying, “I have a special tool for this.” Then he would take me back to the shop, reach under one of the work benches and pull out a work of art that comprised of chains, levers, pulleys and specialized cables that would make s seemingly impossible job, possible. He had a tool for everything.
So, when Arthur and I realized that Bob had a tool for everything we came up with a song for Bob that went to the tune of Big John. And old song about a guy named Big John that worked in a mine that collapsed one day. If you are older than I am (52), then you may have heard it before.
In case you haven’t, here is a YouTube version of Big John sung by Jimmy Dean:
Now that you have listened to the song about Big John, here is the song that Arthur and I devised about Bob Kennedy:
Big Bob…. Big Bob….
Every morning when he showed up at the plant, You could see him arrive.
He was 6 foot 6, and weighed more than than 145.
Wore a chip on his shoulder
And kinda wobbly at the hip.
Everyone knew he didn’t give a flip… That was Bob….
Big Bo ahh… ob… Big Bad Bob. Big Bob….
Bob didn’t say much ’cause he was quiet and shy,
He hummed and we hawed and we didn’t know why.
That was Bo ahh…. ob…. Big Bad Bob….
When he would say, “I’ve gotta job… for the two of you…
Follow me… and I’ll show you what to do…
” That was Bob…. Bahhh….ob… Big Bad Bob….
When somethin’ didn’t work, he would say real quick,
Just spit in the back and give it a kick,
That was Bob…. Baaahhh…ob…. Big Bad Bob.
When you’ve been doin’ it this way for 35 years,
It doesn’t matter what problem you’ve got sittin’ right here’s….
‘Cause I’m Bob…. Baaaah….ob…. Big Bad Bob…..
You see, I have a tool to fix it up just right,
Let me show you how it’s done. I’ll show you the light….
That was Bob….. Baaaah…..ob… Big Bad Bob!
Arthur and I would sing or hum this song as we worked. It made the day go by so fast that we wondered if Bob himself wasn’t warping time using some tool he kept under a workbench in the electric shop.
Like I said…. I love Bob, and I have since the day I met him, and I always will. There came a day when there was contention in the ranks…. I saw it beginning when Arthur was arguing each day with Bob. I think it had to do with the fact that Bob liked to argue also… and neither of them liked to lose an argument. So, each morning, either Arthur or Bob would win the argument (which sounds a lot like a Dilbert moment today)….
My two friends whom I love dearly (to this day) quickly were at each other’s throats. I didn’t realize how much until the morning of December 18, 1985, just before I left the shop and Bob Kennedy said to me… “That Arthur Hammond…. He sure can dish it out, but he just can’t take it”. I walked straight from that conversation down to the the mezzanine level of unit 5 where Art was working on a motor. The first thing he said to me was, “Bob sure can dish it out but he just can’t take it.”
At that point I told Art to just wait a minute. There was something I had to do…. I went back to the shop and told Bob that there was something at the motor where we needed his help. As I was walking with Bob across the mezzanine and down to the motor, my heart was split in two. Here were two of my friends at odds with each other….. Two people whom I would spend the rest of my life praying for their happiness. Yet they viewed each other as mortal enemies…
I had to figure that both of them were right in their own way, yet both of them were wrong about each other. So when Bob arrived at the motor I told them both (as if I had suddenly turned into their mother)…. A little while ago, Bob told me that ‘Art can sure dish it out, but he just can’t take it.’. Then I walked down here and Art tells me the exact same thing about Bob. Now…. what is going on here? Bob?
Bob looked at the two of us like the time had finally come to let it all out…. he said, “Every time we have an argument about anything Art here runs to Ellis Rook complaining about me. If he has something to say, he should come straight to me. Not run to our supervisor!”
Art said, “Now wait a minute! It isn’t me that is running to Ellis Rook! Ellis just spoke with me this morning about sending me back to the plant because I don’t get along with you (meaning Bob). Each time we have an argument, you run to Ellis Rook. Ellis has been telling me that he is thinking of sending me home because you can’t get along with me! Bob had a shocked look on his face.
Playing the facilitator role, I asked Bob… “Is this so?” Because I remembered that one day before (on December 17, 1985) when I had to leave for part of the day to get my blood test because I was going to be married (and in Oklahoma you still needed a blood test to be married)…. when I had returned, I met Ellis Rook (the electrical supervisor) in the elevator, he had asked me about Arthur Hammond.
As a side note, because of the new changes in overtime rules, if I left the plant in the middle of the day, I wasn’t supposed to stay long enough to collect overtime. Ellis Rook started to tell me that I shouldn’t have come back to work after getting my blood test, because I wasn’t eligible to work overtime after taking off part of the day. After apologizing to him (humbly and profusely), he said, that it would be all right just this once… I figured it was because I was going to be married that Saturday on December 21, 1985. Ellis said that he had heard some bad things about Arthur and he was considering sending him back to our plant.
This would have been a terrible disgrace for Arthur and would have been on his permanent record as someone that wouldn’t be able to go on overhaul anymore. I assured Ellis that Arthur Hammond was the most upright of employees and that there wasn’t any reason to send him home.
So, I asked Arthur…. was it true that he had been going to Ellis Rook (the electrical supervisor) to complain about Bob each time they had an argument… Arthur assured the both of us that not only wasn’t it him, but that it was Bob that had been complaining to Ellis Rook about him each time they had an argument. That was why he said Bob could dish it out, but he just couldn’t take it.
Bob replied, “It wasn’t me! It was Arthur! Every time we had an argument Ellis Rook would come to me and ask me about it. That is how I know that Art has been running to Ellis complaining about me. I would never tell Ellis about it! I would deal with it directly with Art. Art said, Ellis Rook was asking me the same thing!
So, I asked…. How would Ellis know if neither of you went to him to complain? I wouldn’t have told him…. This led us to the third person that was present during every argument….
You see, there was another electrician from the plant across town that was there every time Ellis came to Bob asking about Arthur after an argument… Let’s call it Mustang Plant (since that was the name). In order not to embarrass him, I won’t tell you his name, but his initials are “Randy Oxley”. Randy Oxley desperately wanted to move from Mustang Plant to the plant in Midwest City… (all right… since I’m already naming names of plants, I might as well say “Horseshoe Plant”)…
For a time during this overhaul I spent a great deal of time in the electric shop working on motors. Each day I would stand at a workbench disassembling motors, cleaning out their sleeve bearings (yeah. these old motors at the old plant had sleeve bearings) and measuring them, and re-assembling them. During that time there were two things that I listened to. The first thing was the radio…. At that time in history… the leading rock radio stations would play the top 20 songs only. That meant that after listening to the top 20 songs, the only thing left to listen to was the top 20 songs all over again…. To me… It was like a nightmare.
The songs I listened to 100 times were songs like
“Say you Say Me” by Lionel Riche,
One More Night by Phil Collins:
Every Time you Go away by Paul Young:
We Built This City by Jefferson Starship:
Something in the Air Tonight by Phil Collins:
I’m sorry to do this to you, but this last song I know I must have listened to about 50 times as the top 20 played over and over again about every two hours as it has been drilled into my head. I know. I can feel the pity from every one of you who have just read this post.
Today I have “Something In The Air Tonight” by Phil Collins on my iPod only because when I listen to it once each week it reminds me of the time I spent in the electric shop at Horseshoe plant working on those motors working around Reggie Deloney, Steven Trammell (otherwise known as ‘Roomie’), Paul Lucy, and the others that were there during that overhaul.
The second thing that I listened to while I was working on the motors in the electric shop was Randy Oxley. Randy was much like Steven Higginbotham, the summer help that I had worked with the first summer I had worked at our plant. See…. “Steve Higginbotham’s Junky Jalopy Late for the Boiler Blowdown“. He liked to talk.
Randy didn’t consider me as an important asset, so he didn’t talk much to me. He did, however, talk to one of the Maintenance Supervisors, who happened to be his uncle. You see… Randy wanted desperately to move from Mustang Plant to Horseshoe Plant. There was an opening for the B Foreman at Horseshoe plant, and he figured that one of the men in the electric shop would surely get the new foreman opening, which would leave an opening for an electrician.
So Randy would try to butter up his uncle (His uncle was called “Kincade, or Campbell… or some such name). He didn’t seem to care that I was standing right there carefully honing a sleeve bearing for an old GE motor. He openly expressed his opinion. It is only because of his blatant disregard for discretion that I don’t feel any guilt to pass on the conversation.
The one phrase that sticks in my mind is that Randy, while trying to convince his uncle that they should hire him in the electric shop at Horseshoe lake, said, “I am the best electrician at Mustang Plant. The only problem is that I’m the only one that knows it!”
I’m not kidding…. “I am the best electrician at the plant… the problem is that I’m the only one that knows it….”
This became one of my favorite phrases of all time. I couldn’t wait to share it with Arthur…. I told him… “I am the best darn BS’er of all time… the only problem is that I’m the only one that knows it…” Art would say…. “I’m the best <bleeping> goof ball of all time… only I’m the only one that knows it…” I know I had tears in my eyes from laughing so hard.
Actually, I use this phrase to also remind me to never get such a big head that I really think that I’m better at something than others think I am… because they usually know better than I do.
So, this brings us back to the Art and Bob Cage Fight….
It became obvious that both of them had become snookered. Every time Art and Bob had argued about something and Randy Oxley was around, Randy would run up to Ellis’s office and tell him that Art and Bob were at each other’s throats.
Randy was trying to butter himself up to Ellis so that he would hire him when there was an opening in the electric shop. Art and Bob each thought the other had run to Ellis complaining about the other….
That was when the other shoe dropped….
Many years before, when I was still a summer help, and when I was a janitor, there was an electrician at our plant named Mel Woodring. Mel had decided that he didn’t have a future at our plant so he applied for a job at Muskogee. Of course, Bill Bennett and Leroy Godfrey were glad to give him a glowing recommendation because they thought that when Mel left, it gave them an opportunity to hire someone that would…. let us say… fit their culture in a more effective manner.
Because I was a janitor at this time, I was not eligible to apply for an Electrical job, even though Charles Foster had become my mentor and had me begin taking electrical courses through the company.
I had worked the year before I was working with Bob Kennedy at the plant in Midwest City, Oklahoma at Muskogee plant around Mel Woodring. I never worked directly with him, so I will just say that he met the expectations that had been set by my bucket buddy back home, Diana Brien.
Fast forward a year later to when I am on overhaul at Horseshoe plant….. Steven Trammell, Bob Kennedy and a few other electricians that had spent many years at the plant, all thought they would be possible contenders for new foreman’s job. Any of them would have been excellent candidates.
To their stunned surprise… Mel Woodring from Muskogee was given the job! To me, this was an obvious case of the “promote someone in order to get him out of the shop” syndrome.
It turned out that the foremen at Muskogee (John Manning), including our illustrious Don Spears, that I had the momentary lap dance with the year before (see, “Lap O’ Luxury at the Muskogee Power Plant“), had decided to give Mel the highest rating possible so that he would get the job at Midwest City, thus relieving Muskogee from the burden that our plant had placed on them by suggesting that Muskogee transfer him from our plant.
Not only was the Horseshoe plant in a state of shock, but so was Randy Oxley. This meant that there wasn’t going to be an opening in the electric shop, and all of his “schmoozing” had been for naught.
The last day of the overhaul was December 20, 1985, the day before my wedding. I remember that Paul Lucy wanted me to go to a “gentleman’s club”(quite the oxymoron if you ask me) to celebrate and have a sort of a bachelor’s party…. I remember looking straight at Art Hammond right after Paul asked me, and Art shook his head and said…. “Don’t listen to him. Do what is right.” I assured Art that I had no intention of ruining the rest of my life the day before my wedding.
I went directly home.
The next day, Art Hammond was at my wedding with his wife. It was, and still is, the most blessed day of my life. Partly because Art was there at the reception dancing alongside me. I was lucky that I didn’t have a black eye… (which is another story)… and lucky that Art and Sonny Kendrick (who sang at my wedding) were there. Of all of my friends at the power plant, they were the ones that came to my wedding reception of all the people my mom had invited from the plant.
Years later, I traveled with Bob Kennedy on a bus from his plant to Oklahoma City to visit the new Transmission Control Room and back. We sat together and it was just like we had never been apart. Bob talked… and I wished in my mind that I could be a miniature Bob walking behind him every step of the way.
Today any time I have to take a big step for whatever reason…. Bob Kennedy immediately comes to mind. I think about when Bob climbed out of that bus… These words come to my mind….
Through the dust and the smoke of this manmade hell walked a giant of a man that ‘lectricians knew well…. Like a Giant Oak Tree, he just stood there all alone….Big Baaah…. ob…. Big Bad Bob…. Big Bob….. Everyone knew it was the end of line for Big Bob…. Big Bad Bob…. An Electrician from this Plant was a Big Big Man… He was Big Bob! Big Bad Bob! Big Bob!