Originally posted April 26, 2013:
Less than 6 months after Arthur Hammond was hired as an electrician, OD McGaha (proununced Muh Gay Hay), his foreman, wanted to fire him. Not because he wasn’t a good electrician. Not because he had done something wrong. Not even because he smelled bad, or used bad language. OD (prounounced “Oh Dee”) wanted to fire him because he argued too much.
Art and I started the same day in the electric shop. I remember very well when I first walked in the door the morning that I became an electrician. I talked about that day in an earlier post New Home in the Power Plant Electric Shop. That was the first day I met Arthur Francis Hammond Jr. Oh yes. I remember his full name. Everyone just called him Art. I always called him Arthur.
I had the habit of calling people by their full name…. Sometimes I would even embellish their name some. For instance. I used to call Scott Hubbard “Scotland”. Not because he looked Scottish, but because Scott seemed too short of a name for such a great guy. It would be like calling Jesus “Geez”.
Anyway. Arthur had this one trait that became obvious for anyone that had spent more than 5 minutes with him. He liked to argue. He may have thought of it more of playing the devil’s advocate. So, often when you made a statement about anything, Arthur would say something like, “Nah. That couldn’t be true. Nope. What about this?….”
Well. OD McGaha (OD’s first name was OD. The O and the D didn’t stand for anything other than O and D… OD) didn’t like being told he was wrong by anyone, especially by one of his direct reports. He soon went to Bill Bennett to see about having Arthur fired. Of course, Arthur never really did anything to be fired over, he was just pushing OD’s buttons and OD was falling for it.
So, in less than 6 months after Arthur and I joined the electric shop, Bill Bennett decided it would be best if Arthur Hammond moved to our team to help keep the peace in the shop. I’m not sure, but I think Ben Davis was traded from Howard Chumbley’s crew while Diana Lucas (later Brien) moved from our team over to Howard’s, making the circle complete…. except that now Ben, who was as content as all get out to stay on Howard’s crew (who wouldn’t be?), was stuck on OD’s crew… which is another story in itself that I will not be writing about in a later post (well, I may mention an after effect in passing).
Once Arthur was on my team, we worked together often. One reason was that I was perfectly content arguing with Art Hammond (See… I can call him Art, especially in the same sentence as “arguing”, since Arthur made an art out of arguing). I wish I had a picture of this tall man with tired eyes, yet a happy disposition (once you overlooked the tendency to argue). I do have this picture though:
Arthur and I were able to happily work together because he liked to argue and I liked to argue back. You see, I had grown up with an Italian mom. Few people like to argue like Italian mothers, especially mine.
I remember one Thanksgiving sitting with my brother on the couch in the house of my mom’s cousin Larry listening to our Italian relatives arguing in the dining room. We were keeping count on our fingers of how many people were talking at the same time. All of them sounded like they were arguing. Usually it took more than the fingers on one hand.
After a while, we realized that there were several conversations (well…. arguments really) going on at the same time. Yet, there was one person that was in the middle of all the arguments at the same time….. yep….. my mother. She would be taking part in at least three arguments simultaneously. My children grew up thinking that I hated my mother because we were always arguing. It wasn’t until they were older that they realized that we were just trying to decide where to go eat for dinner.
Anyway. When Arthur and I would be working together, all I had to do was say something… anything…. and the argument would start. At least that would be how it would appear to an unsuspecting person walking by listening to us. I knew that what it really meant was nothing more important than my mom and I trying to figure out where we should go out for dinner.
An argument with Arthur would go something like this. Here is one particular one I remember…. I was explaining that what someone had said wasn’t really what they meant. They were just saying that to get a reaction, because they really wanted to see how someone else would react (come to think of it… we were probably talking about Bill Rivers, See the post Resistance in a Coal-Fired Power Plant from last week).
Arthur then proceeded to tell me that lying was never right…. ever. It was never all right to lie. If someone says something, it should be what they mean. I pointed out that people may tell a “white lie”. One that isn’t intended to deceive someone as much as it is to hide something for another purpose. Arthur said that he disagreed. That even a white lie is always wrong….
So, I asked him if he ever told his kids that Santa Claus brought them Christmas Presents on Christmas Day, or that the Tooth Fairy put a coin under their pillow at night. He had to admit that he did. He did have to ponder whether it was right or not. So I told him that I thought it was all right to tell his children this. It didn’t necessarily mean that he was doing something wrong.
I could see that this had really puzzled him, because this was a steadfast dogma of Arthur’s. One thing that really bugged him was when someone lied to him. I have another post that I will write in a few weeks that will give a definite situation where someone was lying to Arthur. It really bugged the heck out of him.
So, I explained to Arthur that even though he told his children that Santa Claus had given them presents, that in some way, maybe Santa Claus really did. Maybe Santa Claus represented the spirit of Christmas, and it was the Spirit of Christmas that prompted Arthur to go out and buy the presents for his children in order to surprise and delight them on Christmas morning. That seemed to satisfy him…..
So, we immediately found something else to argue about, and you know what? The days would fly by when I was working with Arthur. We would go out to wire up a Boiler Water Circulating Pump, using regular rubber tape (as this was before we started using the synthetic stuff), and four hours would go by like nothing. Three small arguments and we would be done.
To get an idea of how big this pump is…. you can easily stand (and dance… um…. if you were inclined to… er…) on the junction box on the lower left corner of this motor.
I actually had a great time working with Arthur Hammond. I was heartbroken the day he told me in 1988 that he had decided to take the money being offered for anyone that wanted to leave before a downsizing was going to occur. He explained the reasons to me. I just wanted to grab him and shake him and tell him “No!” I wanted him to realize that he was making a mistake….. but I didn’t.
You see, Arthur had been a construction electrician before joining the electric shop. He had traveled from one job to another. He hadn’t stayed in one place for more than a couple of years. He was already working on 3 1/2 years in the shop…. He wasn’t used to that. He said that he just didn’t like settling down in one job. He had to keep moving.
I know what he really wanted to do. He wanted to go into business for himself. He wanted to start a cleaning business. He had made a business case for it and was trying to get the funding from a fund for American Indian Entrepreneurs. He just needed the down payment. This looked like the opportunity to do this. He wanted to buy a big steam cleaning truck.
So, I think Arthur’s last day was sometime early June, 1988. I always hate to see my friends walking out the door, not knowing if I will ever see them again. That was the way I felt when Arthur left.
The only shining event that came out of Arthur leaving was that it left an opening in the electric shop that was filled by Scott Hubbard from the Testing team. Scott and I would spend the rest of my years working together along with Charles Foster until the day I left the plant in 2001.
I did see Arthur three months later. He called me at work one day and asked me if I would help him out. His going away package that the company gave him to opt out had run out and he needed some cash. He had 50 shares of company stock left and was wondering if I would buy them from him. He knew that I bought and sold stock and thought I might be interested.
I was glad to help him out, so we arranged to meet at the house he was renting in Stillwater (I was living in Ponca City at the time), on a Saturday. He went to the Morrison, Oklahoma bank and had the bank president sign the stock certificates, and when I arrived, at his home, I handed him a check for $1600.00 and he gave me the stock certificate for 50 shares ($32 per share).
The price of the stock has gone up and down through the years…. I could have made a profit on them I suppose. I have kept them to this day. Every 3 months I receive a dividend check in the mail for $19 from those 50 shares….. I hang onto those shares. Maybe it is because ever three months, I am reminded of the day I bought those shares.
When I arrived at Arthur’s house out in the country, just down the road from where I eventually bought my own home up on the hill, Arthur handed me the certificates and said, “that’s it…. That’s the last of the package I received…. It sure didn’t last long.” I shook his hand, gave him a hug and said goodbye. That was the last time I ever heard from Arthur.
I think today he is living in Tulsa. I am not certain. He would be in his early 60’s now. I only hope that all is well with him and his family. I hope that he finally found a place to settle down. Some place where he could wake up each day….. go to work, or walk down the street and talk to a friend who enjoys a good argument. I know that if he could do that, then he would be content. Nothing was more enjoyable to Arthur than being able to take part in a good argument.
Later in life, thinking back to when I was young, I sometimes wonder at how my first real friend, Mark Schlemper remained my friend throughout my childhood. I remember as a boy, there were times when I wasn’t the friendliest friend. Sometimes I was downright selfish. Mark, on the other hand, was always considerate. Not in an Eddie Haskell way, but in a sincere way. I learned a lot about being a kinder person from Mark, and I’m forever grateful.
I think if Mark had not been my friend during my childhood, then this story would have a very different ending.
Last Friday (April 18, 2014), I posted a story called “Vertan or Sand and Making Enemies of a Power Plant Man“. At the end of that post I explained that I had become the enemy of a team leader during the “We’ve Got The Power” program. I explained this program in the post: “Power Plant ‘We’ve Got The Power’ Program“. With all that said, here is the story:
I was a plant electrician at a coal-fired power plant in North Central Oklahoma when we took part in the “We’ve Got The Power” program. At the time, I was in charge of maintaining the Unit 1 precipitator. The precipitator is what takes the ash out of the exhaust from the boiler, so that you don’t normally see smoke coming out of a Power Plant Smokestack.
My bucket buddy in the Electric Shop, Diana Brien was on a team that tried an experiment on the Unit 1 precipitator by injecting sand into the intake duct in the hope that it would increase the performance. I didn’t put much faith in the experiment, because it was based on something that had happened almost a year earlier when sand was burned in the boiler in order to burn off the oil that had been soaked into the sand.
I hadn’t seen any sand build up in front of the precipitator during the next overhaul, and didn’t believe that any of it had been able to make it’s way through the economizer and the air preheaters to the precipitator.
When Ron Kilman asked me about it, I said that I didn’t think it would do any good, but also, it wouldn’t do any harm either, so I told Ron that I couldn’t see any reason not to do the experiment. Who knows. Maybe something unexpected would happen. — Something did, but not quite in the way anyone would have expected.
On the day of the experiment, sand was blown into the intake duct of the precipitator. When the experiment was taking place, Diana Brien sat at the precipitator computer behind the Unit 1 Alarm Panel in the Control Room. She was printing out readings every so many minutes as the experiment progressed.
At times, I walked by and checked on her to see how it was going. One time when I was standing there watching the readings on the computer, all of the sudden the Opacity shot up. Opacity is used to measure how much smoke is going out of the smoke stack. Something definitely happened to cause a large puff of smoke.
I switched screens to look at the power on each of the control cabinets. After a few seconds I found that cabinet 1G10 had zero Volts on the secondary side of the transformer. It should have been somewhere above 40 Kilovolts. The cabinet hadn’t tripped, but it wasn’t charging up the plates. Cabinet 1G10 was in the very back row of the precipitator, and when the power shuts off on the cabinet it readily lets go of the ash that had built up on it when the rappers on the roof strike the plates.
When I saw the puff occur, I knew where to go look, because this happened whenever one of the back cabinets was turned off. I told Dee that it looked like a fuse had blown on the cabinet. The ash was going to continue billowing out of the precipitator for a couple of hours if I didn’t go do something about it. So, I told Dee that I was going to go to the Precipitator Control Room and replace the fuse.
I passed through the electric shop to grab my tool bucket and headed out to the precipitator. When I arrived, I found the cabinet just as it had indicated on the computer. The fuse had obviously failed. Interesting timing. Coincidence? I thought it was. The fuses controlling the back cabinets were usually the ones that blew because we ran them at a much higher voltage than the rest of the cabinets (at the time).
I quickly replaced the fuse (after attaching grounding cables to the leads, and using a pair of high voltage gloves). Then I powered the cabinet back on.
I returned to the Control Room and told Dee that I replaced the fuse on cabinet 1G10. The opacity had returned to normal. I watched a few more minutes to make sure everything had stabilized, and then I left.
When Ron Kilman was evaluating the results of the experiment, he could plainly see that something strange had happened. Smoke had been pouring out of the smoke stack in the middle of the experiment. So, he asked me what I thought about it.
First of all, as a disclaimer, our team had our own experiments we had been conducting on the precipitator in hopes of coming up with money savings ideas. So, when I told Ron what had happened with the fuse blowing, I wondered if he would trust me to tell the truth, since I had my own skin in the game.
I explained in detail to Ron how the fuse had blown and that I was standing next to Dee watching the computer when the smoke started blowing out of the stack. I could tell that a fuse had blown by looking at the readings, so I went out and replaced the fuse. I told him that fuses do blow periodically in the back of the precipitator, but I couldn’t explain why it happened to fail at that particular time. After I gave him my explanation, he seemed satisfied that I was telling the truth.
I think a token amount of points were awarded to the team because something obviously had happened during the experiment, though it wasn’t clear that sand had anything to do with it. On the other hand, our team was awarded a large amount of points for increasing the precipitator performance using a different method that I may bring up in a later post. To the team that burned the sand, this looked a lot like foul play.
The leader of the team was the Shift Supervisor Jim Padgett. He became very upset when he found out that I had gone to the precipitator control room during the experiment and worked on the equipment. Our team had been awarded a lot of points that was enough to purchase the dining room table set that I have in my dining room today:
It became known throughout the control room and the electric shop that Jim Padgett viewed me as his enemy. The other electricians would jokingly refer to Jim as my “friend”, knowing that Jim had basically declared “war” on me. Any time someone in the shop would have something to say about Jim, they would say, “Kevin’s friend” Jim Padgett….”
When I first became aware that Jim was upset with me, I understood why. If I had been in his shoes I would probably feel the same way. It’s a rotten feeling when you believe that someone has cheated you out of something important. So, I decided up front that I was going to become Jim’s best friend. This is where I think my memory of Mark Schlemper with his patience for me as a boy helped me with this decision.
I had determined that any time Jim asked me to do something I wouldn’t hesitate to help him. It took about a year before Jim could look at me without grimacing. Finally, one day, he asked me if I would go look at something for him to see if we needed a clearance, or if it was something that could be fixed right away. It was something minor, but I knew that this was an indicator that the ice was finally beginning to melt. I was able to fix the problem on the spot, and returned to let him know.
Once we were on semi-speaking terms again, I took an opportunity one day to ask Jim if he would like to join our Computer Club. I had started a Computer Club in the Electric Shop. Anyone could join it for a one time fee of $5.00 that was used to buy shareware and disk cases. For a while I also published a newsletter letting the members of the club know what games and such we had that could be checked out.
Once Jim Padgett joined the Computer Club, it was much easier to have a regular conversation outside of the normal daily business. I had put the thought in my mind when I decided that Jim was going to become my best friend that nothing would make me happier than to be able to do something for Jim. That way, no matter what I was doing at the time, if Jim asked me to do something for him, I would drop whatever I was doing and do my best to help.
I could go on and on explaining how gradually over time, not only was Jim my friend, but Jim acted more and more as if I was his friend as well. Let me just say that the entire process took almost exactly ten years. I can remember the exact moment when Jim indicated to me that I had become his friend.
Here is what happened:
The phone next to my bed rang at 2:15 in the morning on Thursday February 17, 2000. I instantly knew what it meant when the phone rang in the middle of the night. It meant that someone at the plant was calling because there was a problem. Who else would be up on in the middle of the night? The night shift of course.
When I answered the phone, Jim Padgett said, “I hate to wake you up buddy.” I replied, “No. That’s okay. What’s up?” Jim explained that the dumper was down and a train was about halfway through dumping the coal and everything was dead in the water. I said, “Ok. I’ll be right out.”
I turned to Kelly and told her that I had to go fix the dumper. She already knew of course. I pulled on a pair of jeans, a flannel shirt, and on the way out the door, I slipped on my work boots and laced them up. Then I drove the 30 miles out to the plant.
It was just before 3:00 am when I arrived. I grabbed my hardhat from the electric shop and took the elevator up to the Control Room. Jim apologized again and told me that how the dumper acted when it shutdown. I went back down the elevator to the electric shop where I grabbed the key to the pickup truck and my tool bucket and left the electric shop into the cool night air. Power Plants at night take on magical properties. It’s hard to explain.
When I arrived at the coalyard, I went straight into the Dumper Switchgear where the relays that controlled the dumper were mounted. Having worked on the dumper for the past 17 years, I could troubleshoot the circuits in my sleep. — Actually, I may have done just that. It didn’t take long, and I had replaced a contact on a relay that had broken and had the Coalyard Operator test the dumper long enough to know it was going to work.
When I returned back to Control Room Jim was sitting in the Shift Supervisor’s office. I walked in and showed him the small relay contact that had caused the failure. Jim, looked at me and said something that I thought only a friend would say so casually. I won’t use his exact words, though I remember not only the exact words, I remember his exact expression. He indicated to me that he had passed some gas, and he was apologizing about it. I replied, “Well. That happens.” (No. Not the other thing that happens). I told him I was going to go home. It was about 3:40 by that time.
Jim wished me a good night, and thanked me again for coming out. As I was going back to the parking lot, and on the way home driving through the dark, tired from being woken up in the middle of the night, I had a great feeling of peace. That brief conversation with Jim just before I left was so pleasant in an odd way that I knew we had become friends. This was such a long way from where we had been 10 years earlier when Jim had literally wanted to kill me (well, not that he actually would…).
When I arrived home, I peeled my clothes off in the utility room to keep from tracking coal all over the house. I set the small broken relay contact on the kitchen table as a token to my wife, so she could see why I was called out when she wakes up in the morning. I climbed back into bed around 4:15 to sleep for another two hours.
That morning when I arrived at the plant, the first thing I learned was that about the time that my alarm had woken me up that morning, Jim Padgett had left his shift and driven to his home in Ponca City. When he walked in the door to his house, he collapsed and died instantly of a heart attack. That would have been about 3 hours after the moment that we had said goodbye.
I grieved for Jim’s wife Jane, who had worked for a while at the plant before marrying Jim, but I didn’t grieve for Jim. Something told me, and maybe it was Jim, that he was at peace. In the moment that I heard about Jim’s death, I burned the conversation we had just had into my mind so that I would never forget it.
To this day whenever I know that someone is upset with me for something that I have done to them personally, I am determined that they will become one of my best friends. I will do anything for that person if they ask (unless, of course it is to “not be their friend”). I have my childhood friend Mark Schlemper to thank for the attitude that helped me decide to reach out to Jim Padgett. Without that experience while growing up, Jim and I would never have become friends.
I would like to leave you with a song that reminds me of Jim whenever I hear it. It is called “Bright Eyes” from the movie “Watership Down”. Art Garfunkel sings it:
Note: If you are not able to watch the video above, try clicking this link: Bright Eyes, Art Garfunkel
Originally posted April 19, 2013:
Resistance is Futile! You may have heard that before. Especially if you are a Star Trek Fan. If not, then you know that there is always some form of resistance wherever you are.
I learned a lot about resistance when I first joined the electric shop at the coal-fired power plant in North Central Oklahoma in 1984. I was assigned to work with Sonny Kendrick and Bill Rivers on the Precipitator during overhauls and when I wasn’t working on the manhole pumps and there wasn’t any other emergencies going on. Actually, from 1984 on, on, the Precipitator for the next 17 years I continued to work on the precipitator… (if I had only known my fate….).
Not only did I learn a lot about resistance, I also learned about capacitance, reactance, transformers, rectifiers, power supplies, diodes, transistors, op amps, and pots (also known as potentiometers). Bill Rivers was the brains of the outfit. Sonny was the Electric Specialist banished to the Precipitator by Leroy Godfrey (See Singing Along with Sonny Kendrick). Bill thought up the ideas and Sonny went to work to implement them. I just jumped in where I was needed.
The Precipitator is the large box between the boiler and the smokestack (maybe you can see this in the Power plant picture). The purpose of the electrostatic precipitator is to take the smoke (or fly ash) out of the exhaust before it went out of the smokestack. The controls for the Precipitator were all electronic at that time. That meant that there were circuit boards full of resistors, capacitors, transistors, operational amplifiers, diodes and potentiometers. These circuit boards controlled the way the power was distributed throughout the precipitator wires and plates through high powered transformers, and how the rappers and vibrators operated that dropped the collected ash into the hoppers.
Bill had me take an electronics course at the Indian Meridian Vo-tech so I would know the basics. Then he taught me all the shortcuts. I had to be able to look at a resistor and tell right away what the value of resistance it was. Resistors are color-coded and you had to learn what each of the colors represented…
I was expected to know this by sight. Bill would test me. There was a mnemonic device that I was taught to remember what each color represented, but it is not appropriate to repeat it, so I won’t. It is enough to say that the colors go like this: Black, Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White (I will never forget this my entire life). These represent the numbers zero through 9. Here is a full explanation of how to read a resistor….. just in case you are curious, or you are such a boring person that you really need some material to bring up when you are at a party and don’t know what to say:
I found that having just the correct amount of resistance was very important. Too much or too less, and everything stops working.
Isn’t it that way with management also? If the management is too resistant to change, then things come to a halt. If they have too little resistance, they lose control of the situation. Depending on the circuit (or managerial decision) and what you are trying to do, it helps to have a manager that has a variable resistance to meet the needs of each situation. Resistance to change is always a balancing act.
During the first two years I was an electrician, the main control panels that controlled the operation of the precipitators were electronic. We spent a lot of time in the lab troubleshooting electric circuits looking for blown (or bad) parts that needed to be replaced. Then we would solder new components on the circuit boards and then put them back in operation. I learned how to be an electronics junky. I became addicted to fixing electronic circuit boards. It was like a game to me.
Later, the precipitator controls were changed to digital controls. That is, they were more like little computers controlling the precipitator. Instead of a bunch of circuit boards dumbly, but cleverly, doing their job, (how many commas can I use in one sentence?), little brains were added that made decisions and reacted to conditions in a much more dynamic way.
What was interesting was that one day Bill Rivers was describing how technology was going to be in the future. He said that some day, we will be able to sit in the lab and look on a computer and see what all the controls in the precipitator were doing (this was 1984). If something isn’t working right, we could just reach over, type a few keys on the computer and adjust the controls. Drink our sweetened tea (a necessary staple in Oklahoma at the time), and then wait for the next crisis…. Then he would giggle at the look of disbelief on my face.
When he was telling me this, I was thinking in my head…. Well, that would be nice, but this sounds more like a pipe dream to me than reality. What does an older guy with six kids from a tool and die company in Columbia Missouri (where I grew up, by chance) know about the future of anything….. well…. anything…uh… new age…. If that is what you might call it… I found out you just don’t really know when you are sitting in front of a true “visionary” with tremendous insight.
Bill Rivers had this incredible knack for telling the future. In 1984 he was predicting computer controls in the control room where you ran the entire plant from a computer on a desk instead of using the “Big Board”.
He said you would be able to call someone on a phone you kept in your pocket or your watch like Dick Tracey.
I don’t know what journals Bill was reading or if he just dreamed all this stuff up in his head, or maybe he was a Star Trek Fan that believed that if you can dream it up you can do it. I do know that he picked up on subtle queues and made great inferences from them that seemed astronomically unlikely. However, I have to admit that he caught me off guard a number of times with predictions that definitely came true.
I will talk about this more in a future post, but for now I will say that we did upgrade the precipitator to where you could sit in the control room and monitor and adjust the precipitator controls (all 84 on each unit), and even each of the rappers (672 rappers) and vibrators (168 vibrators) on the roof of each precipitator. With one key on the computer I could send a plume of ash out of the smokestack that looked like the unit had just tripped, and a moment later, clean it up again. This meant that I could send smoke signals to the Osage Indian tribe 20 miles north up the Arkansas (pronounced “Are Kansas”) river, telling them that the Pow Wow would begin at sunset.
Today, I understand that the “Big Board” at the plant is just a large junction box and the plant is controlled almost (if not) completely by computers sitting on the desk. Before I left the plant in 2001, this was being transitioned slowly to computer controls. I have another story to tell some day about this, and how an operator named Jim Cave, a Power Plant Genius and true Power Plant Man of the highest integrity, was snubbed by upper management for speeding this technology along. — Another example of Power Plant Resistance….
But for now…. back to my electronic days… before I began re-programming the Eeprom chips in the precipitator controls….
Bill Rivers confided with me one day that when the new Instrument and Controls department had been formed from the “Results” department that his dream had been to become a part of this team. It meant the world to him. It was where he believed he belonged. It was one of his major goals in life.
There used to be two electrical specialists in the Power Plant. Sonny Kendrick was not always the only one. The other specialist was chosen to go to the Instrument and Controls shop. Bill Rivers wanted to move there also. He definitely had the experience and the knowledge to be a superb instrument and controls person. But Bill had this one problem.
He loved to joke around. He loved to pull strings and push buttons. I have mentioned in a previous posts that Bill would play a new joke on Sonny Kendrick every single day. As I have unfortunately found out in my own life… this tends to make them…. well….. it tends to make enemies out of those who have a chip on their shoulder. Those people who naturally feel inadequate in their abilities or their position in life. To go one step further…. anyone who feels “unloved”….. these people definitely do not like being joked with. They seem to never forgive you. My greatest regret in life is joking around with these individuals.
So, when it came time to choose who would be a part of the new Instrument and Controls shop, Bill Rivers was turned down. It was explained to him that the reason he was not given the job was because he cut off the leads of a resistor when he replaced them. — I’m not kidding. Bill Rivers had the habit of cutting off the leads of each resistor, transistor, diode or capacitor that he replaced…. this is why Monty Adams turned down his request for joining the “elite” Instrument and Controls shop (as he told Bill to his face).
Someone had told the Instrument and Controls Supervisor Monty Adams that Bill Rivers cut the leads off of transistors and resistors when he replaced them so that you couldn’t test them to see if they were all right. Implying that he didn’t want you to know whether he had replaced the transistor or resistor by mistake.
Bill Rivers took several transistors, cut the leads off of each of them and handed them to me and asked me to test them to see if they was still good or if they were bad. I took out my voltmeter, set it to ohms, and proceeded to test them as Bill Rivers had taught me. I told him…. this transistor is good….. this one is bad….
You see…. there is no way to cut the leads off of a transistor in such a way to make it impossible to tell if a transistor is good or bad…. In reality…. you cut the leads off of a bad transistor so that the person working on the circuit board knows that this is a bad transistor and doesn’t use it again by accident. This was electronics 101.
When Bill told me this story, he literally had tears in his eyes. This was because being part of the Instrument and Controls team was part of his dream. His family and the entire rest of his life was decided the day he was told that he was not going to be a part of a team that he believed was his true lot in life.
I remember his exact words as he sat there in the lab alone and told me this story. He said, “… and Monty didn’t know… He didn’t know that you cut the leads…. that is standard procedure….” In Bill’s giggly way, he was crying out loud as he told me this.
From that point on….I knew that the decisions Bill made in his life were driven by that one decision to exclude him from this team. Unlike many of us that could say to ourselves…. “That is their loss”…. Bill kept this pain in his heart each day…. Every decision from that day further was effected by this event.
I calculated it out one day that I spent 414 hours driving back and forth from Stillwater, Oklahoma to the plant and back each day with Bill Rivers (along with Yvonne Taylor and Rich Litzer and occasionally others that needed a ride), and over that time, I became very close to Bill, even to the point of tutoring his son in Algebra (see post: How Many Power Plant Men Can You Put in a 1982 Honda Civic?).
I say this because I know about the pain that inflicted Bill River by a rash decision based on the hearsay of someone that held a grudge. I know how his entire life was changed and how it ended for Bill Rivers as a power plant employee. I know that every decision by Bill after this date was made in response to this one decision. Anyone who experienced Bill after 1983 knows what I am talking about.
I realized that today my own decisions in life help spell out my future. How some little remark may be misinterpreted, or even properly so. I realize as I write this post that how I accept or reject these events in my life, determines the future of my family. After seeing how every event in Bill’s life after that day at the power company was determined by his experience was to his detriment, I am determined not to let the same thing happened to me…..
That is why I have taken on the philosophy in my life that no matter how my actions are misinterpreted, I am determined to remain true to myself. I know what I mean, and I mean what I say, and I say what I mean, and an Elephant is Faithful 100 %.
Comment from the Original Post:
Originally Posted on April 20, 2012. I added a couple of pictures including an Actual picture of Ed Shiever:
The Coal Fired Power Plant where I worked is out in the country and it supplies its own drinkable water as well as the super clean water needed to generate steam to turn the turbine. One of the first steps to creating drinkable water was to filter it through a sand filter. The plant has two large sand filters to filter the water needed for plant operations.
These are the same tanks I was in when I was Sandblasting under the watchful eye of Curtis Love which was the topic of the post about “Power Plant Safety as Interpreted by Curtis Love”. Before I was able to sandblast the bottom section of the sand filter tank, Ed Shiever and I had to remove all the teflon filter nozzles from the two middle sections of each tank. Once sandblasted, the tank was painted, the nozzles were replaced and the sand filter was put back in operation.
Ed Shiever and I were the only two that were skinny enough and willing enough to crawl through the small entrance to the tanks. The doorway as I mentioned in an earlier post is a 12-inch by 18-inch oval. Just wide enough to get stuck. So, I had to watch what I ate for lunch otherwise I could picture myself getting stuck in the small portal just like Winnie the Pooh after he had eaten all of Rabbits honey.
Ed Shiever was a janitor at the time, and was being loaned to the labor crew to work with me in the sand filter tank. Ed was shorter than average and was a clean-cut respectable person that puts you in the mind of Audey Murphy, the most decorated soldier of World War II. For those power plant men that know Ed Shiever, but haven’t ever put him and Audey Murphy together in their mind will be surprised and I’m sure agree with me that Ed Shiever looked strikingly similar to Audey Murphy at the time when we were in the sand filter tank (1983).
Before I explain what happened to Ed Shiever while we spent a couple of weeks holed up inside the sand filter tanks removing the hundreds of teflon nozzles and then replacing them, I first need to explain how I had come to this point in my life when Ed and I were in this echo chamber of a filter tank. This is where Ann Bell comes into the story. Or, as my friend Ben Cox and I referred to her as “Ramblin’ Ann”.
I met Ramblin’ Ann when I worked at The Bakery in Columbia Missouri while I was in my last year of college at the University of Missouri. I was hired to work nights so that I could handle the drunks that wandered in from nearby bars at 2 a.m.. Just up the street from The Bakery were two other Colleges, Columbia College and Stephen’s College which were primarily girls schools. Ramblin’ Ann attended Stephen’s College. She had this uncanny knack of starting a sentence and never finishing it. I don’t mean that she would stop halfway through the sentence. No. When Ann began the first sentence, it was just molded into any following sentences as if she not only removed the periods but also the spaces between the words. She spoke in a seemly exagerated Kentucky accent (especially when she was talking about her accent, at which point her accent became even more pronounced). She was from a small town in Kentucky and during the summers she worked in Mammoth Cave as a tour guide (this is an important part of this story… believe it or not).
A normal conversation began like this: “Hello Ann, how is it going?” “WellHiKevin!Iamjustdoinggreat!IhadagooddayatschooltodayYouKnowWhatIMean? IwenttomyclassesandwhenIwenttomymailboxtopickupmymailIrealizedthatthistownisn’tlikethesmalltownIcamefromin KentuckybecausehereIamjustboxnumber324 butinthetownwhereIcamefrom themailmanwouldstopbymyhousetogiveusthemailandwouldsay, “Hi Ann, how are you today?” YouKnowWhatImean? AndIwouldsay, “WellHiMisterPostmansirIamdoingjustgreattodayHowareYoudoing?”YouknowwhatImean?SoItIsSureDifferentlivinginabigtownlikethisandwhenIthinkbackonmyclassesthatIhadtoday andIthinkabouthowmuchitisgoingtochangemylifeandallbecauseIamjustlearning somuchstuffthatIhaveneverlearnedbefore IknowthatwhenIamOlderandI’mthinkingbackonthisdayandhowmuchitmeanstome, IknowthatIamgoingtothinkthatthiswasareallygreatdayYouKnowWhatIMean?”….
The conversation could continue on indefinitely. So, when my girlfriend who later became my wife came to visit from Seattle, I told her that she just had to go and see Ramblin’ Ann Bell, but that we had to tell her that we only have about 15 minutes, and then we have to go somewhere else because otherwise, we would be there all night nodding our heads every time we heard “Know What I Mean?”
My roommate Barry Katz thought I was being inconsiderate one day when he walked in the room and I was sitting at the desk doing my homework and occasionally I would say, “Uh Huh” without looking up or stopping my work, so after sitting there watching me for a minute he asked me what I was doing and I told him I was talking to Ann Bell and I pointed to the phone receiver sitting on the desk. I could hear the “You Know What I Mean”s coming out of the receiver and each time I would say, “Uh Huh”. So, when he told me that wasn’t nice, I picked up the receiver and I said to Ramblin’ Ann, “Hey Ann, Barry is here, would you like to talk to him?” and I handed it to him. He sat down and asked Ann how she was doing…. 10 minutes or so and about 150 Uh Huh’s later, Barry looked over at me and slowly started placing the receiver back on the desktop repeating “Uh Huh” every so many seconds.
Anyway. The reason I told you this story about Ramblin’ Ann was because after a while I began to imitate Ann. I would start ramblin’ about something, and it was almost as if I couldn’t stop. If you have ever read the story about Dr. Jekyll and Mr. Hyde, Dr. Jekyll would transform into Mr. Hyde by drinking a potion. But eventually he started turning into Mr. Hyde randomly without having to drink the potion. Well, that is what had happened to me. In some situations, I would just start to ramble non-stop for as long as it takes to get it all out… Which Ed Shiever found out was a very long time.
You see, Ed Shiever and I worked in the Sand filter tanks for an entire week removing the nozzles and another week putting them back in. the entire time I was talking non-stop to him. while he just worked away saying the occasional “uh huh” whenever I said, “you know what I mean?”, though I didn’t say it as much as Ramblin’ Ann did. I could never match her prowess because my lung capacity just wasn’t as much.
Ed Shiever was a good sport though, and patiently tolerated me without asking to be dismissed back to be a janitor, or even to see the company Psychiatrist…. Well, we didn’t have a company psychiatrist at the time.
It wasn’t until a few years later when Ronald Reagan went to visit Mammoth Cave during the summer, that this event with Ed Shiever came back to me. You see… Ann Bell had been a tour guide at Mammoth Cave during the summer, and as far as I knew still was. My wife and I both realized what this could mean if Ronald Reagan toured Mammoth Cave with Ann Bell as his tour guide. Thoughts about a Manchurian Candidate Conspiracy came to mind as we could imagine the voice of Ann Bell echoing through the cave as a very excited Ramblin’ Ann explained to Ronald Reagan how excited she was and how much this was going to mean to her in her life, and how she will think back on this time and remember how excited she was and how happy she will be to have those memories and how much she appreciated the opportunity to show Ronald Reagan around in Mammoth Cave… with all of this echoing and echoing and echoing….
We had watched this on the evening news and it was too late to call to warn the President of the United States not to go in the cave with Ann Bell, so we could only hope for the best. Unfortunately, Ronald’s memory seemed to be getting worse by the day after his tour of Mammoth Cave and started having a confused look on his face as if he was still trying to parse out the echoes that were still bouncing in his head.
Of course, my wife and I felt like we were the only two people in the entire country that knew the full potential of what had happened.
So this started me thinking… Poor Ed Shiever, one of the nicest people you could ever meet, had patiently listened to me rambling for two entire weeks in an echo chamber just like the President. I wondered how much impact that encounter had on his sanity. So, I went to Ed and I apologized to him one day for rambling so much while we were working in the Sand Filter tank, hoping that he would forgive me for messing up his future. He said, “Sure, no problem.” Just like that. He was all right. He hadn’t lost his memory or become confused, or even taken up rambling himself. I breathed a sigh of relief. Ed Shiever had shown his true character under such harsh conditions and duress. I’m just as sure today as I was then that if Ed Shiever had been with Audey Murphy on the battlefield many years earlier, Ed would have been standing right alongside him all the way across the enemy lines. In my book, Ed Shiever is one of the most decorated Power Plant Men still around at the Power Plant today.
I finally found an actual picture of Ed Shiever:
When I was an electrician at the coal-fired Power Plant in North Central Oklahoma I inherited working on the Precipitators from Sonny Kendrick, the Electrical Specialist in the electric shop. One time after I had been struggling with the performance of the precipitator trying to lower the emissions of Fly Ash going out of the smoke stacks, I encountered a very odd situation.
One morning as I was walking out to the precipitator as I passed the Unit 1 boiler I noticed that a couple of tanker trailers were sitting outside the bottom ash area. Hoses had been attached to one of them and were running up the side of the boiler. What looked like a pump was running. I didn’t have a clue what was in the tanker. I figured it was just some routine thing that power plants did every so often to make things more interesting. You wouldn’t believe how many times Power Plant Men would come up with new and interesting things just to keep me in awe. (Of course, I am easily amazed).
Anyway, I didn’t really pay much attention to the tanker on the way to the precipitator. I just walked around the tankers that were there and entered the precipitator switchgear and up the stairs to the Precipitator control room where 84 control cabinets were waiting for my attention. On the way into the switchgear I had glanced up at the smoke stacks and noticed that the exhaust from the boiler was looking pretty good.
As I walked passed the control cabinets that controlled the back of the precipitator, I was surprised to find that they were powered up all the way and there wasn’t any sparking happening. Well. I thought. Maybe they are at low load and not much is happening inside the precipitator this morning.
As I walked between the two rows of cabinets toward the cabinets that controlled the transformers near the intake of the precipitator, my surprise turned into astonishment. I had never seen the front cabinets powered up to such a high level with no sparking. Everything was 180 degrees from the way I had left the cabinets the evening before when I was struggling to adjust the power to lower the emissions.
After going through each of the cabinets adjusting the power levels higher only to find that I was able to easily increase the performance even further, I returned to the electric shop for break. When I arrived in the electric shop office I told Charles that something very strange had happened this morning and I’m trying to figure it out, because all of the sudden the precipitator was operating at maximum efficiency.
After break I walked back out to the precipitator control room past the tanker trailers and found that everything was still running smoothly. “My work is done” I thought. I decided to go to the top of the precipitator and start working on fixing malfunctioning vibrators for the rest of the day.
I worked on the precipitator roof until noon, and then went back to the shop for lunch. I sat with Charles as we talked about movies we had seen. Charles was telling me about how the song for Ghostbusters had been on the radio. When the song said,
“If there’s something strange
in your neighborhood
Who ya gonna call?
Charles’ son Tim (not having seen the movie) thought that instead of saying “Ghostbusters” they were saying “Who ya gonna call? Charles Foster!” Besides being exceptionally cute, it was also an honor for Charles for him to hear Tim sing, “Who ya gonna call? Charles Foster!”
After lunch was over I went back out to the precipitator control room to check on the cabinets one more time. To my surprise when I walked through the row of cabinets, they were sparking again as they had been the day before! Not quite as bad, but bad enough that I had to go through the cabinets and adjust them back down almost to the levels where I had them before.
It took longer to adjust the cabinets down than it did to raise them in the morning. When break time came along, I was too engrossed in adjusting the cabinets to notice, so I continued working through break. It must have taken me close to three hours. At that time I was still using a small screwdriver on some potentiometers inside each of the cabinets to make the adjustments.
About the time I finished, all the sudden something happened. The cabinets began acting the way I had seen them in the morning! All the sparking stopped and the cabinets began powering up to the highest point they could go based on where I had set them. Ok. Now I needed to find out what was going on!
I walked out of the precipitator and headed for the Control Room. I walked past the tanker trailers and noticed that the pump was running again. I hadn’t thought about it, but when I had walked by them a few hours earlier they had been turned off. This was curious. I figured that it was more than a coincidence.
Pat Quiring was the Unit 1 Control Room operator when I arrived. I asked him what has been going on with Unit 1. I explained to him that when I arrived in the morning I found the precipitator running smoothly, then later it wasn’t, and just a few minutes ago, something happened again and there it was. Pat said two things were going on that day.
One thing was that we had been burning a pile of sand that had been soaked with oil. They had been mixing it with the coal at the coalyard and blowing it into the boiler with the pulverized coal in order to dispose of the hazardous waste. Hmm.. This was a possibility. I couldn’t see how the sand would make a difference, but maybe the mixture of the chemicals in the oil had something to do with it.
Then I asked him. “What about those tankers on the side of the boiler? Why are they there?” Pat said that we were also burning Vertan. Well, not “burning” exactly. We were destroying it in the boiler, because it was chemical waste that needed to be disposed and it is easily destroyed into it’s chemical components in the heat of the boiler.
“Vertan? What’s Vertan?” I asked Pat. He said it was some chemical used to clean boiler tubes. These tankers had been sent to our plant from another plant that had just had the boiler tubes cleaned, and we were just burning it off to get rid of it. They had a schedule they were using to burn the Vertan. They couldn’t just get rid of it all at once because it caused a buildup in the economizer that caused the airflow to be affected through the tail end of the boiler.
So, I wondered, maybe this has to do with airflow. Diverting the airflow to different parts of the precipitator could definitely affect things. The cabinets out in the middle of the precipitator definitely had different electrical properties than those out on the edge.
I suddenly realized that this was 1988 and the Internet was not readily available to the typical user, and the World Wide Web still had a few years before it was widely going to be used. Frustrated that I couldn’t just go “Google” something for another ten years, I did the next best thing that I could do. I decided to pay a visit to our Power Plant Doctor! I wrote about Doctor George Pepple in the post “Power Plant Doctor Does a Jig in a Puddle of Acid“. He was the head Power Plant Chemist.
I went to the Chemistry Lab and found George working away on some diabolical experiment. No. Not really, he was probably just testing some water samples. When Dr. Pepple was working on any kind of chemical test, he did it with such mastery and grace that it always reminded me of a mad scientist.
I asked George about Vertan. He explained to me that it was a chemical that was mixed in water and pumped through the boiler tubes to clean out calcium buildup and the like. I mentioned to him that I thought it may be affecting the operation of the precipitator and I was curious to know more about it.
Professor Pepple then explained to me that Vertan was called TetraAmmonia EDTA. EDTA? Yeah, he said, “Ethylenediaminetetraacetic Acid”. He said this just like my Animal Learning Professor, Dr. Anger used to say “Scopalamine” (See the Post “Poison Pill for Power Plant Pigeons“).
I wrote down this information and I continued monitoring the progress of the precipitator throughout the rest of the week. Each time the pumps were running on the Vertan trailers, the precipitator operated as if it was new and completely clean. Each time the pumps turned off, the precipitator reverted back to the regular mode of operation, only it would be a little better each time. By the time all the Vertan had been destroyed in the boiler, the precipitator was running very well on it’s own.
Over the weekend I went to the University Library at Oklahoma State University in Stillwater and Looked up TetraAmmonia EDTA. Not much had been written about it. I was able to find an article about it in a Journal. It had the chemical composition.
A few years later when the Internet became available I was able to find a better model of the Vertan molecule:
I mentioned that at the same time that the Vertan was being burned in the boiler, we were also blowing contaminated sand into the boiler in order to burn off oil that had soaked into the sand. At one point, I had to go work on the head end of the number 10 long belt to find a 480 volt ground in a circuit. When I arrived, I could see where the oil from the sand had caused the coal to cake up on the belt and cause a big mess where the conveyor dumped the coal onto the belt 12.
There didn’t seem to be any correlation between the times that sand was being burned. The process for burning the sand lasted a lot longer than burning off the Vertan. By the time that the sand was burned off, the precipitator was humming away operating at near maximum efficiency. So, it seemed as if the sand had something to do with the increase in performance.
I was convinced that burning Vertan in the boiler was more convincing. If not Vertan, then just injecting water could have been a factor. Since the Vertan was in water and they were pumping large amounts of water into the fireball in order to destroy the Vertan. Maybe the increase in Humidity had something to do with the improvement.
A couple of years later when the “We’ve Got The Power” Program was underway (See the Post, “Power Plant ‘We’ve Got The Power’ Program“). Terry Blevins and I were investigating the idea that Vertan could be used to improve the performance of the precipitator. We found that Ammonia Injection was used to treat Precipitators.
This is done by injecting ammonia into the intake of the precipitator to treat it when it was performing poorly. This reinforced our idea that Vertan was the main reason that the precipitator had responded favorably during that time since Vertan broke down into Ammonia at high temperatures. Even then, we didn’t exclude the possibility that the increase of humidity may have also played a role.
Another team had the idea that injecting sand into the intake of the precipitator would improve the performance of the precipitator by sandblasting the ash off of the plates. They had seen this happen when sand had been burned earlier. I had rejected this idea as being viable. I knew that the velocity of the airflow in the precipitator was no faster than 4 miles an hour. Hardly fast enough to keep grains of sand airborne.
It was worth a try though, and the other team pursued the idea and ran a test by injecting the sand. It definitely wouldn’t hurt anything to try. The idea was rejected by the Steering Committee (Ron Kilman), based on my input, even though something extraordinary happened during the test. When this happened, I became the instant enemy of the team leader.
I will cover this dilemma in a later post (possibly next week). For now I will just leave you with the knowledge that because I had chosen Vertan over Sand, I had definitely made an enemy of a True Power Plant Man.
Originally Posted on April 12, 2013:
I witnessed a fast approaching Wall Cloud coming south from Tulsa when I was on overhaul at the Muskogee Oklahoma Coal-fired Power Plant the fall 1984. I stood outside of the Unit 6 electric shop looking north watching the darkness approaching at an alarming rate. As it approached I could see debris flying up from the highway a half mile away telling me that we were in for one heck of a wind.
I suppose I was mesmerized because all I did was stand there and stare at it. Maybe I thought, “At least if this blows me away, I can spend my last moments staring down a tornado. I watched as the wind hit the precipitator and stirred up the piles of ash under it and blew it away as if someone was blowing out a birthday candle.
The wall cloud rolled right over the top of me looking like a big steamroller wheel. At the same time the wind hit me knocking me back. I couldn’t breathe because of the dust and I took two steps to the electric shop door and dodged inside. The walls rattled as the wind buffeted the building. All I could think of was, “Cool!”
We found out a few minutes later that 4 miles south of us by the Fort Howard Paper plant a tornado dropped out of the cloud and touched down.
That was only one of many exciting moments at the Muskogee Power Plant. Last week I talked about how there must have been something in the water there that made people think and act a little differently than they otherwise would (See Something is in the Water at the Muskogee Power Plant). I said that because of the “interesting” way people thought and acted in Muskogee. This is the story about the day I think I drank some of the water by mistake.
Each morning when I was waiting for the work to start in the electric shop, two electricians, Jay Harris and Richard Moravek had a ritual that they performed before heading off to work on the precipitators for the day. One of them would hum a note, then together they would sing a short jingle that went like this: “Nestles makes the very best…….. Chooooocolate!!!” Richard would whistle as he sang, just like the Nestle’s Rabbit– Every morning without fail.
Both Richard and Jay were soldiers. Jay was a young soldier that knew my brother from the Marine Reserves. He would train with him in the TOW Anti-Tank unit somewhere around Broken Arrow. Richard…. Well… Richard was a Vietnam Veteran that had seen a lot of combat.
Richard had a metal plate in his forehead. He could tap it and you could hear it tink. “Tink, Tink, Tink.” He was a forward observer in Vietnam. They usually had a life expectancy of a couple of weeks. Richard had survived. He was attached to a group of Rangers.
Richard explained to me one time that he used to use a big M60 machine gun like Sylvester Stallone used in the movie Rambo. Only, he couldn’t shoot two of them at a time, and he couldn’t walk forward with it either like Rambo. He could only walk backward because the machine gun would knock you down.
I know that Richard suffered from the effects of Agent Orange and was fighting the cancer it caused at one point in his life. He died in November 6, 2007. He left behind a son named Richard that has commented to me that his dad was “A Great Man.”
If I keep talking about the people that I met while I was at Muskogee, I will never get to the story that I want to tell, because heroes seemed to be all over the place. Another electrician was Ellis Moore, who was in Vietnam while he was in the Army. He was still Shell Shocked from his experience there.
He told me stories about how his unit would be patrolling through the woods, and they would hear some gunfire, and they would just all put their backs to each other and would shoot blindly in all directions.
They were frightened and figured that was the only way they were going to stay alive. Ellis had an odd look on his face when he told me this story. One that told me that he had seen things that were too horrible to bring back into his mind.
This leads me to my story…. It began on a Friday afternoon about 2pm. I was working with Ben Davis, a fellow electrician from our plant in North Central Oklahoma.
I enjoyed working with Ben Davis during the overhaul. Ben was one of the most calm and normal person you could find. He was probably the most sane person in the electric shop. He didn’t care what other people thought about him. When he told you what he thought, you could count on it being the truth.
When I was dressing up in rags, (See the post From Power Plant Rags to Riches), Ben just looked a little concerned that I may have lost my sanity, but that didn’t keep him from treating me with the respect and dignity that I wasn’t even maintaining for myself.
We were working on 6A Forced Draft Fan and we made a measurement with the large Meggar indicating that the insulation might be a little weak somewhere in the motor.
We weren’t sure what the acceptable level of deviation was from the norm, so we decided that we would find Don Spears and ask him. Don was the Electrical Supervisor at Muskogee at the time. He was the splittin’ image of Oklahoma University’s Football Coach Barry Switzer’s bigger brother.
Ben and I talked to John Manning, the Electrical B Foreman, and he agreed that we should talk to Don, and would let him know that we were looking for him when he returned from a meeting he was attending.
We waited around in the Unit 6 electric shop until around 3 o’clock. At 3 o’clock on Friday, we liked to bug out early to head home to our families. At lunch I would go to the trailer down by the river and pack up my stuff in my car and then park it outside the electric shop so that when 3 o’clock rolled around, we could dodge out the door and head for home.
Only this time, we were waiting around for Don to show up. We finally decided…. What the heck…. We can talk to him on Monday. We bolted out the door, and Ben and I headed back toward Stillwater at breakneck speed.
Come Monday morning, I pulled up to the electric shop parking lot, and who do you think was standing there just waiting for me? Yep. Don Spears. With his hands on his hips, and his big Football Coach stance trying his darnedest to look just like Barry Switzer telling his team at half time that they were going to have to do better than that.
I happened to pull up to the shop about the same time that Ben did. Don Spears immediately lit into us. He said, “You left early on Friday didn’t you!!!” I said, “What? Surely not!”
Don replied that he came looking for us around 3:30 and we were no where to be found. He paged us but we didn’t answer. I responded by telling him that we must have been out working on a motor and couldn’t hear him because it was too noisy.
Of course, Don wasn’t going to buy that. He said this Friday he wanted to us to meet him in his office at 4:00. He was going to make sure we didn’t bug out early. Ben and I assured him that we would be there.
So, next Friday at lunch Don came down to the shop and said….. “Remember. I want to see you in my office at 4:00 sharp. We both told him that we would be there, come rain or shine.
3 o’clock rolled around and we headed for home… I don’t think I stopped laughing until I was in Tulsa. It is always fun to play an on-going joke with someone. Especially when that someone could pulverize you with one simple punch.
So, you can imagine what I saw when I arrived at the Unit 6 Electric Shop next Monday Morning….
Yep. That was Don. He was standing there with his feet spread apart just like Paul Bunyan. His hands were on his hips and he looked rather mad. He said, “You Did it Again!!! You left early!”
I said, “What do you mean we left early?” He said, “You didn’t come to my office at 4:00!” “Oh, ” I said, “I can’t believe we forgot! Sorry! It must have slipped our mind.”
I know. I was being rotten, but this was just too much fun.
So, here comes next Friday. Same routine. At lunch I drove down to the trailer down by the river and packed up my stuff and parked my car outside the Unit 6 Electric Shop expecting to leave out of there around 3 o’clock
Around 2:30 in the afternoon, Ben and I were working on something in the shop getting ready to clean up and head on home. Don Spears was sitting in the electric shop office in a chair right inside the door where he could look out and watch our every move.
As 3 o’clock rolled by, there was Don Spears with his face plastered to the window in the door not taking his eyes off of us, with a big grin on his face. Ben said something like “it looks like he has us this time.”
So, I decided it was time to take matters into my own hands…. I walked in the office and sat down right on Don Spear’s lap. He looked at me totally surprised. I put my arms around his neck and I looked him straight in the eyes…..
Don sat there stunned. He couldn’t move, and he couldn’t speak. With the most sincere expression I could muster up, while looking in his eyes as dreamily as I could, I said, “You are just the cutest thing. I can’t hardly STAND it!” (Imagine saying that to Barry Switzer’s bigger brother). Then I stood up and walked out into the shop.
I turned my head just enough to see Don darting out the back door to the office in the other direction. I turned to Ben and said, “Let’s go!” Out we went, and we were on our way home.
Come next Monday morning….. Ok…. I figured…. here it comes…. I drove up to the electric shop parking lot and there was Barry…. I mean Don… smoking a cigarette pacing back and forth in front of the electric shop door.
As I approached him he said, “I know what you’re up to!” I said in a calm voice with as straight of a face that I could muster… “What do you mean?” He said, “I talked to Bill Bennett (the A Foreman at our plant). He told me that you are just using ‘Psychology’ on me.”
I replied, “I am? What do you mean?” He said, “You know what I mean.” I looked confused as if I didn’t know what he was talking about. He continued, “Bill told me all about you.” I said something like, “Bill is a great guy.” Then I walked into the shop.
The next Friday…. Don was no where to be seen. The remainder of the overhaul, Don was keeping his distance. I don’t think we caught sight of him the next 4 weeks. It seemed that I had finally spooked him. From that point on, he decided that he didn’t care so much if we bugged out early.
In an earlier post titled “Power Plant We’ve Got the Power Program” I explained how in 1990 we broke up into teams at the coal-fired Power Plant in North Central Oklahoma to find ways to save the Electric Company money. Before we were actually able to turn in our first set of ideas, we had a month or more to prepare those ideas and to turn them into proposals. During this time, and throughout the entire “We’ve Got the Power” program, teams who wanted to succeed and outdo the other teams became very secretive. Our team was definitely that way. We had secret experiments going on throughout the plant, and we didn’t want other teams to even know what areas we were investigating.
As the program progressed, a certain level of stress developed between teams. In a later post I will tell a story about how this level of stress led to a situation of suspicion and eventually even animosity. This post will not go into that situation. Instead I want to explain what our team did to try to alleviate some of the stress by devising a special “Power Plant Joke” that we played on the rest of the Power Plant Men (and Women).
There were some teams that had setup some experiments that they were running to see if their ideas may save the company money. Our team had several experiments running throughout the beginning months. All of which we carefully hid from prying eyes. We were proud of our stealthiness. Sneaking around, making sure we weren’t being followed when we went to take readings from our carefully hidden recorders and other devices.
Charles Foster, Scott Hubbard and I were sitting in the electric shop office discussing the stress level that had permeated the plant, and we thought we could take advantage of the stress by setting up a “We’ve Got The Power” Experiment out in the open that would be obvious to anyone that walked by. Only it would be a fake experiment designed to play a joke on the unsuspecting Power Plant Man.
Here is what we did….
Right outside the electric shop in the Turbine Generator basement there is a water fountain. We placed a hazard waste barrel a few feet away from the water fountain. Like this:
Then we mounted an junction box on the wall a few feet above the chemical waste barrel and a little to the right.
We turned the junction box on so that the hinge was on the top, allowing the door to fall closed naturally. This was an important part of the setup to allow for the joke to automatically reset each time it was operated.
We ran some copper tubing from the water fountain water line over to the box. Then another copper line came out the bottom of the box and into the barrel. Next to that copper tube, another smaller copper tube came out and just bent toward the front of the box. We had a plastic hose coming out of the barrel and over to the drain next to the water fountain. Then we put Yellow Barrier Tape around the hole setup.
We tied Caution tags to the Barrier tape that said “We’ve Got the Power Experiment” Do not enter! I signed the tags.
There was an electric conduit running up from the junction box, that went up and into the wall about 6 feet above the junction box. So, this looked like a legitimate experiment going on, but for the life of anyone, no one would be able to tell what it was doing. — Mainly because it wasn’t doing anything….. At least not until someone went to investigate it.
So. Here is what would happen….
Employees would walk by and see the barrier tape with the hazardous waste barrel and the hoses and water lines coming from the back of the water fountain, with a junction box above it that was not completely closed. The door to the junction box was down, but not screwed closed. Conduit was going into the box, which meant that something electrical was probably inside Maybe a solenoid or something that was controlling the experiment.
They would read the Caution Tag that explained that this was a “We’ve Got the Power” experiment, and it would pique their curiosity enough that they couldn’t help but investigate it to see what was really going on.
So, what would invariably happen, was that someone would enter the area that was barrier taped off, and open the junction box to see what was inside. When they lifted the lid, they would find that they were instantly being soaked with water that would spray out of a small copper line pointing right at them. At the same time, an alarm would go off above them behind the wall right above the electric shop office. It was very loud.
So, as we would be sitting there during lunch, we would suddenly hear the alarm go off, and we could dart out the door to the Turbine Generator basement to find a drenched Power Plant Man. They were usually amused that they had fallen into the trap. I say usually, because I have the feeling that one particular person who found himself violating the barrier tape and getting soaked didn’t act too cordial about it. I’ll get to him later.
So, inside the box was a counter. It counted how many times the box had been opened and sprayed someone with water. So, we could go inspect it in the morning and we would know if anyone had looked at it while we were gone.
After the experiment had been there about a week, an overhaul was going on where Power Plant Men from different plants came to our plant to perform the overhaul. The plant would shut off one of the units and we would take it apart, and put it back together again fixing problems along the way (well. maybe not quite that drastic. It was a time to fix things that couldn’t be maintained or repaired while the unit was running).
So, the Power Plant Men at our plant, who by that time all knew about the bogus experiment just outside the electric shop, would bring unsuspecting Power Plant Men from other plants over to the see the “We’ve Got the Power” experiment going on in the hopes of seeing them get sprayed with water. So, a new round of alarms were going off during that time.
Eventually, when people had heard about the experiment, and knew that it was spraying people, they would approach the experiment with caution. When they opened the lid of the junction box, they would stand next to it against the wall in order to not get wet. The spray pattern from the crimped copper line was fairly wide, so you would have to stand practically against the wall next to the box in order to stay dry.
So, this was when we implemented Phase 2 of the experiment. — Yeah. It’s the second phase of many Power Plant Jokes that usually make the joke a much bigger success than the first phase. For instance, I have written a post about the “Psychological Profile of a Control Room Operator” in which I had played a joke on Gene Day, where after a week of preparing him for the final joke, I had coaxed him to look over my shoulder, only to have him read that according to his psychological profile, he was the type of person that would look over your shoulder and read your private material.
That would be a good joke in itself, but when Gene Day read that and began joking the life out of me, I pointed out to him the final statement in Gene Day’s profile which stated that he tends to choke people who try to help him by creating Psychological profiles of him. This second part of the joke is what really completes the joke and makes it a real success. The first part just makes it funny.
So, here is how we modified the experiment for Phase 2…. The nozzle that sprayed the employee actually came out the bottom of the box and elbowed to point toward the front of the box. So, what we did was we took a file and filed a tiny notch in the side of the copper tubing just below the junction box just above the elbow. The notch was on the side of the copper tube, and it was deep enough of a notch to make a little hole in the side of the copper line.
So, then, if someone was standing to the only side they could stand next to the box and the barrel and they opened up the lid of the Junction Box to show someone how the experiment worked, they wouldn’t notice right away, but a small stream of water would be spraying on their pants in just the appropriate location to make it look like the person had just pee’ed their pants.
Right when we had finished modifying the experiment for Phase 2, Howard Chumbley walked into the electric shop. He was a retired Electric Foreman, that I have written about in the post “Pioneers of Power Plant Fame Finally Find Peace“. He had come to visit the plant that day because there was going to be a Men’s Club lunch and he wanted to come and see some other old codgers that he used to work with that liked to attend the Men’s Club dinners. He always wanted to see us of course as well.
So, we told him about the “We’ve Got The Power” Joke Experiment just outside the electric shop that sprayed water on people. Of course, he wanted to see it, so we took him out and let him observe it. We explained that when you open the lid, an alarm goes off, the counter toggles and water sprays out of that little nozzle sticking out at the bottom. We told him he could try it if he wanted to see how it worked.
So, he climbed under the barrier tape and walked around the side of the junction box that didn’t have the barrel, and reached over and lifted the lid. The alarm when off, water sprayed out, and Howard laughed with glee to see how we had devised such a nice trick. After watching the water spray for about 3 or 4 seconds, he suddenly realized that something was wrong. He dropped the lid and looked down, only to find that it looked like he had just pee’ed his pants.
That was it! That was icing on the cake. Howard laughed even more when he realized what had happened.
The next morning when we came in the shop, we went to look at the experiment, it had been disassembled, or shutdown in some manner. I think some caution tag had been placed there by Gary Wright, the Shift Supervisor stating something like this was a safety hazard, or some such thing.
Anyway, when I went up to the Control Room to ask him why he shutdown our experiment he was adamant that it constituted Horseplay and someone could get hurt. Maybe when the water sprayed on them, they might jerk back and fall down and get hurt. Ok….
I suppose. Though, by the time he took it down, everyone at the plant already knew about it, and we were just in the Phase 2 part of the experiment. In this phase anyone who was looking at the experiment was doing it by opening up the door from the side, and peeing their pants and they wouldn’t jerk back……—- Oh….. I see…. Shift Supervisors don’t usually like to walk into the control room looking like they have just pee’ed their pants.
I will say that I hadn’t expected that type of reaction from Gary Wright, because up to that time, he seemed more mild-mannered than the rest of the Shift Supervisors. We just took it that the more upset Gary was with us about it, the more successful the joke had been implemented. The joke had played out by that time, and we were good with it either way.
“Something is in the water in Muskogee.” That is what I used to say. Something that makes people feel invulnerable. That was what I attributed to David Stewart’s belief that he could jump up in a falling elevator just before it crashed into the ground and he would be saved (see After Effects of Power Plant Drop Tests).
There was another story at the Muskogee Coal-fired Power Plant where this one mechanic believed that he could stick his finger in a running lawnmower and pull it out so fast that it wouldn’t cut his finger off. Of course, True Power Plant Men tried to reason with him to convince him that it was impossible…. Then there were others who said… “Ok. Prove it.”
Think about it. A lawnmower spins at the same rate that a Turbine Generator spins when it makes electricity. 3,600 time a minute. Or 60 times each second. Since the blade in a lawnmower extends in both directions, a blade would fly by your finger 120 times each second. Twice as fast as the electric current in your house cycles positive and negative.
This means that the person will have to stick their finger in the path of the lawnmower blade and pull it out within 8/1000th of a second…. IF they were able to time it so that they put their finger in the path at the precise moment that the blade passed by. Meaning that on average, the person only has 4/1000th of a second (or 0.004 seconds) to perform this feat (on average… could be a little more, could be less).
Unfortunately for this person, he was not convinced by the logicians that it was impossible, and therefore proceeded to prove his case. If you walked over and met this person in the maintenance shop at Muskogee, you would find that he was missing not only one finger, but two. Why? Because after failing the first time and having his finger chopped off, he was still so stubborn to think that he could have been wrong, so later he tried it again. Hence the reason why two of his fingers were missing.
Upon hearing this story, I came to the conclusion that there must be something in the water at Muskogee. I drank soft drinks as much as possible while I was there on overhaul during the fall of 1984.
As I mentioned in the post Power Plant Rags to Riches, in 1984 I was on overhaul at Muskogee with Ben Davis. An overhaul is when a unit is taken offline for a number of weeks so that maintenance can be performed on equipment that is only possible when the unit is offline. During this particular overhaul, Unit 6 at Muskogee was offline.
Ben and I were working out of the Unit 6 Electric shop. Ben was staying with his friend Don Burnett, a machinist that used to work at our plant when I was a summer help. Before Don worked there, he worked in a Zinc Smelting plant by Tonkawa, Oklahoma. Not only was Don an expert machinist, he was also one of the kindest people you would run across. Especially at Muskogee.
I was staying in a “trailer down by the river” by the old plant. Units one, two and three. They were older gas-fired units. I think at the time, only Unit 3 was still operational. The first 2 weeks of the overhaul, I stayed in a rectory with the Catholic priests in town. Then David Stewart offered to let me stay in his trailer down by the river for only $50 a week.
After the first couple of weeks it was decided that the 4 week overhaul had turned into a 9 week overhaul because of some complications that they found when inspecting something on the turbine. So, I ended up staying another month.
When they found out that they were going to be down for an extra 5 weeks, they called in for reinforcements, and that is when I met my new “roomie”, Steven Trammell from the plant in Midwest City. He shared the trailer for the last 4 weeks of the overhaul. From that time on, Steven and I were good friends. To this day (and I know Steven reads this blog) we refer to each other as “roomie”, even though it has been 28 years since we bunked together in a trailer…..down by the river.
I have one main story that I would like to tell with this post that I am saving until the end. It was what happened to me the day I think I accidentally drank some of the water…. (sounds like Mexico doesn’t it?). Before I tell that story, I want to introduce you to a couple of other True Power Plant Men that lived next door to “roomie” and I in another trailer down by the river (this was the Arkansas River by the way…. Yeah… The Arkansas river that flowed from Kansas into Oklahoma… — go figure. The same river that we used at our plant to fill our lake. See the post Power Plant Men taking the Temperature Down By The River).
Joe Flannery was from Seminole Plant and I believe that Chet Turner was from Horseshoe Plant, though I could be mistaken about Chet. I know he was living in south Oklahoma City at the time, so he could have been working at Seminole as well. These were two electricians that were very great guys. Joe Flannery had a nickname. I don’t remember exactly what it was, but I think it was “Bam Bam”.
Joe was very strong, like Bam Bam. He also reminded me of Goober on the Andy Griffith Show, though Gary Lyons at our plant even resembled Goober more:
Chet was older than Joe by quite a lot, but I could tell that my Roomie and Joe held him in high esteem… So much so, that I might just wait on the story I was going to tell you about the time that I drank the water in Muskogee to focus more on Chet Turner… otherwise known as Chester A Turner.
I first met Chet when my roomie asked me if I wanted to go out and eat with him and our two trailer neighbors. On the way to dinner, we had to stop by a used car lot to look at what was available because Chet loved looking at cars. He had gray hair and was 60 years old at the time.
During the next 5 weeks, we went out to eat almost every night during the week with Chet and Joe. We explored Muskogee as best we could. That means that we visited about every car lot in the town. We also ate at a really good BBQ place where you sat at a picnic table and ate the BBQ on a piece of wax paper.
One night we were invited by another electrician (I think his name was Kevin Davis) to meet him at a Wal-Mart (or some other similar store) parking lot where his son was trying to win a car by being the last person to keep his hand on the car. He had already been doing it for about 4 days, and was exhausted. It would have reminded me of the times I had spent adjusting the precipitator controls after a fouled start-up, only, I hadn’t done that yet.
I was usually hungry when we were on our way to dinner, and I was slightly annoyed by the many visits to car lots when my stomach was set on “growl” mode. I never said anything about it, because I could tell that Chet was having a lot of fun looking at cars.
If only I had known Chet’s story when I met him, I would have treated him with the respect that he deserved. If I had known his history, I would have paid for his meals. It was only much later that I learned the true nature of Chet, a humble small gray-haired man that seemed happy all the time, and just went with the flow.
You know… It is sometimes amazing to me that I can work next to someone for a long time only to find out that they are one of the nation’s greatest heroes. I never actually worked with Chet, but I did sit next to him while we ate our supper only to return to the trailers down by the river exhausted from the long work days.
Let me start by saying that Chet’s father was a carpenter. Like another friend of mine, and Jesus Christ himself, Chester had a father that made furniture by hand. During World War II, Chester’s mother helped assemble aircraft for the United States Air Force.
While Chet’s mother was working building planes for the Air Force, Chet had joined the Navy and learned to be an electrician. He went to work on a ship in the Pacific called the USS Salt Lake City. It was in need of repairs, so he was assigned to work on the repairs.
While working on the ship, it was called to service, and Chet went to war. After a couple of battles where the ship was damaged from Japanese shelling it went to Hawaii to be repaired. After that, it was sent to the battle at Iwo Jima. That’s right. The Iwo Jima that we all know about. Chet was actually there to see the flag being raised by the Marines on Mount Suribachi:
Chet fought valiantly in the battle at Iwo Jima and was able to recall stories of specific attacks against targets that would make your hair stand on end to listen to. After it was all said and done, Chet was awarded the Victory Medal,
Asiatic-Pacific Campaign Medal,
and the Philippine Liberation Campaign Ribbon.
As well as others….
At the time that I knew Chet, I didn’t know any of this about him. Isn’t that the case so many times in our lives. Think twice about that Wal-Mart Greeter when you go to the store. When you see an elderly old man or woman struggling with her cart to put her groceries in her car…. You may be looking at a hero.
I was looking at Chet thinking, “boy. This guy sure enjoys looking at cars…. I’m hungry.” This past week I was thinking about writing tonight about an event that took place while Ben and I were on overhaul at Muskogee. I thought it would be a funny story that you would enjoy. So, I asked my roomie, “What was the name of the guy that was staying with Joe Flannery in the trailer? The one with the gray hair?”
He reminded me that his name was Chet Turner. Steven told me that Chet had died a while back (on January 12, 2013, less than two weeks after I started writing about Power Plant Men) and that he was a good friend. So much so, that Steven found it hard to think about him being gone without bringing tears to his eyes. This got me thinking…. I knew Chet for a brief time. I wondered what was his story. I knew from my own experience that most True Power Plant Men are Heroes of some kind, so I looked him up.
Now you know what I found. What I have told you is only a small portion of the wonderful life of a great man. I encourage everyone to go and read about Chet Turner. The Story of Chester A. Turner
Notice the humble beginning of this man who’s father was a carpenter. Who’s mother worked in the same effort that her son did during the war to fight against tyranny. How he became an electrician at a young age, not to rule the world, but to serve mankind.
Looking at cars has taken on an entirely new meaning to me. I am honored today to have Chet forever in my memory.