When Power Plant Men Talk… It Pays to Listen

Originally Posted:  May 4, 2012.  I added some comments from the original post at the end of this post:

I wrote an earlier post about days some people would have liked to take back.  There was one day that I would like to take back.  It was the day Ken Conrad was teaching me how to setup and operate the two large water cannons that we used to irrigate the plant grounds.  During my second summer as a summer help (1980), when I had about 6 weeks left of the summer, I was asked to take over the watering of the plant grounds because Ken Conrad was needed to do other jobs and this was taking too much of his time.

The first summer I worked as a summer help, whenever it rained, by the time you had walked from the Engineer’s Shack parking lot to the Welding Shop entrance, you felt like someone 10 feet tall.  Because the entire distance would turn into a pool of red mud and as you took each step, you grew taller and taller as the mud stuck to your feet.  Just before you entered the maintenance shop, you could scrape your feet on a Boot Scraper  to whittle you down to size so that you would fit through the doorway.

 The entire main plant grounds would be nothing but mud because there wasn’t any grass.  It had all been scraped or trampled away while building the plant and now we were trying to grow grass in places where only weeds had dared to trod before.  When trucks drove into the maintenance garage, they dropped mud all over the floor.  It was the summer help’s job the first summer to sweep up the shop twice each week.  If it had been raining, I usually started with a shovel scraping up piles of mud.  So, I recognized the importance of quickly growing grass.

The day that Ken Conrad was explaining to me how to setup and operate the water cannons, I was only half paying attention.  “I got it.  Roll out the plastic fiber fire hose, unhook the water cannon from the tractor, let out the cable.  turn it on the fire hydrant… Done….”  That was all I heard.  What Ken was saying to me was a lot different.  it had to do with all the warnings about doing it the correct way.  I think in my mind I wasn’t listening because I was thinking that it really wasn’t all that difficult.

Water Cannon similar to ours only ours had another spool on it that held the fire hose

So, here is what happened the next morning when I went to setup the first water cannon to water the field just north of the water treatment plant up to the Million Gallon #2 Diesel Oil Tanks berms.  I thought… ok… Step one:  roll out the hose…  Hmmm… hook it up to the fire hydrant, and then just pull the water gun forward with the tractor and it should unroll the hose….

Well.  my first mistake was that I hadn’t disengaged the spool so that it would turn freely, so when I pulled the tractor forward, off popped the connector on the end of the hose attached to the fire hydrant.  That’s when I remembered Ken telling me not to forget to disengage the spool before letting out the hose.  That’s ok.  Ken showed me how to fix that.

I beat on it with a hammer to knock out the clamp and put it back on the end of the hose after I had cut off a piece to have a clean end.  Disengaged the spool, and tried it again… Nope.  Pulled the end off again…  I was letting it out too fast.  That’s when I remembered Ken Conrad telling me not to let the hose out too fast or it would pull the end off.  I repaired the connector on the hose again.

After finally laying the hose out and hooking it up to the water cannon, I disconnected the water cannon from the tractor and hooked up the hose and began pulling the steel cable out of the cable spool by pulling the tractor forward.  Well, at first the water cannon wanted to follow me because you had to disengage that spool also, (as Ken had showed me).

So I thought I could just drag the water cannon back around to where it started, but that wasn’t a good idea because I ended up pulling off the connector on the fire hose again, only on the other end than before.  Anyway, after repairing the hose at least three times and getting everything in position twice, I was finally ready to turn on the water.

That was when things turned from bad to worse.  The first thing I did was turned on the fire hydrant using a large wrench where the water pressure instantly blew the hose out of the connector and water poured out into a big mud  puddle by the time I could turn it off.  then I remembered that Ken had told me to remember to make sure the screw valve was closed when you turned on the fire hydrant or else you will blow the end off of the hose….

So, I repaired the hose again, and reconnected it (standing in mud now).  Closed the screw-type valve and turned on the fire hydrant.  Then I opened the screw-type valve and the end of the hose blew off again…  Then I remembered that Ken Conrad had told me to make sure I open the valve very slowly otherwise I would blow the connector off of the hose.  So I repaired the hose again and hooked everything up (while standing in a bigger mud puddle) and tried it again.

I opened the valve slowly and the water cannon began shooting water out as I opened the valve up further and further… until a hole blew out in the middle of the hose shooting water all over the tractor.  So I turned off the water again as I remembered that Ken Conrad had told me not to open the valve very far or it would start to blow out holes in the hose.  I went and patched the hole the way that Ken Conrad has showed me and went back to try it again… walking through mud over to the fire hydrant, where there was an increasingly larger puddle.

I remember that it was around lunch time when I was standing in the middle of that field covered with mud  standing in what looked like a mud hole that pigs would just love, trying to repair a hole in the hose for the 3rd or 4th time that it dawned on me how different my morning would have been if I had only paid more attention to Ken when he was explaining everything to me the day before.

I skipped lunch that day. Finally around 1 o’clock the water cannon was on and it was shooting water out about 40 yards in either direction.  I spent that entire day making one mistake after the other.  I was beat by the time to go home.

Like this only without the grass

After sleeping on it I was determined not to let the experience from the day before intimidate me.  I had learned from my mistakes and was ready to tackle the job of watering the mud in hopes that the sprigs of grass would somehow survive the 100 degree heat.  As a matter of fact, the rest of the next 6 weeks the temperature was over 100 degrees every day.  This was Oklahoma.

When I first took over for Ken, the watering was being done in three shifts.  I watered during the day, the other summer help watered in the evening and a fairly new guy named Ron Hunt watered during the late night shift (not the Ron Hunt of Power Plant Man Fame, but a guy that eventually moved to the plant in Midwest City and became an operator).  After two weeks, they did away with the night shift and I was put on 7 – 12s.  that is 7 days a week, 12 hour days.

I didn’t own a car so, I had to catch a ride with someone in the morning in order to be at the plant by 6am.  Then I had to catch a ride back to Stillwater in the evening when I left at 6:30pm each day of the week.  The Operators and the security guards worked out good for this.  I would ride to work in the morning with whichever operator was kind enough to pick me up at the corner of Washington and Lakeview (where I had walked from my parent’s house) and whichever security guard that was going that way in the evening.

I found out after a few days on this job that Colonel Sneed whose office was in the Engineer’s Shack was in charge of this job.  So he would drive by and see how things were going.  After a while I had a routine of where I would put the water cannons and where I would lay the Irrigation pipes.  He seemed to be well pleased and even said that I could go to work for him when I was done with this job.

I told him that I was going to go back to school in a few weeks and he said that he would be waiting for me the next summer.  Only Colonel Sneed, who was an older man with silver hair wasn’t there when I returned the next summer.  He had either retired or died, or both.  I never was sure which.  I did learn a few years later that he had died, but I didn’t know when.

Besides the first day on that job, the only other memorable day I had was on a Sunday when there wasn’t anyone in the maintenance shop, I remember parking the yellow Cushman cart out in the shade of 10 and 11 belts (That is the big long belt that you see in the power plant picture on the right side of this post) where I could see both water cannons and the irrigation pipes.

I was watching dirt devils dance across the coal pile.  This was one of those days when the wind is just right to make dirt devils, and there was one after the other travelling from east to west across the coal pile.

A Dust Devil

The Security guard was on his way back from checking the dam when he stopped along the road, got out of his jeep and sat on the hood and watched them for 5 or 10 minutes.  For those of you who might not know, a dirt devil looks like a miniature tornado as it kicks up the dirt from the ground.  These dirt devils were actually “coal devils” and they were black.  They were lined up one after the other blowing across the the huge black pile of coal.  You can see the size of the coal pile from this Google Image:

This is an overhead view of the plant

This is an overhead view of the plant

Then as the security guard on the hill and I were watching the coal pile, this long black finger came flying up from the coal pile reaching higher and higher into the sky twirling itself into one huge coal devil!  It traveled toward me from the coalyard and across the intake coming straight toward where I was.  It ended up going directly between the two smoke stacks which are each 500 feet tall.  This coal devil was easily twice the size of the smoke stacks.  Tall and Black.  After it went between the smoke stacks it just faded like dust devils do and it was gone.

Picture a dust devil this size but pure black

As the monstrous black coal devil was coming toward the plant, the security guard had jumped in his jeep and headed down to where I was parked.  He was all excited and asked me if I had seen how big that was.  We talked about the dust devils for a few minutes, then he left and I went back to watching the water cannons and irrigation pipes.

I had to wonder if that big coal devil had been created just for our benefit.  It seemed at the time that God had been entertaining us that Sunday by sending small dust devils across the coal pile, and just as they do in Fireworks shows, he had ended this one with the big grand Finale by sending the monster-sized coal devil down directly between the smoke stacks.

Some times you just know when you have been blessed by a unique experience.  We didn’t have cameras on cell phones in those days, and I’m not too quick with a camera anyway, but at least the guard and I were able to share that moment.

I began this post by explaining why it is important to listen to a Power Plant Man when he speaks and ended it with the dust devil story.  How are these two things related?  As I pointed out, I felt as if I had been given a special gift that day.  Especially the minute it took for the monster coal devil to travel almost 1/2 mile from the coal yard through the smoke stacks.

It may be that one moment when a Power Plant Man speaks that he exposes his hidden wisdom.  If you aren’t paying close attention, you may miss it.  I did Ken Conrad an injustice the day he explained how to run the irrigation equipment and it cost me a day of pure frustration, but the real marvel was that as I made each mistake I could remember Ken telling me about that.

Ken had given me a full tutorial of the job I was about to do.  How many people would do that?  If I had only been listening, I would have heard Ken telling me much more than how to do the job.  I would have seen clearly how Ken cared enough about me to spend all the time it took to thoroughly teach me what he knew.

That is the way it is with True Power Plant Men.  Ken could have said, “roll out the hose, pull out the cable,, turn the water on … and good luck…”, but he didn’t.  he went through every detail of how to make my job easier.  I may have felt blessed when the monster coal devil flew between the stacks, but it was that day a couple of weeks earlier when Ken had taken the time and showed his concern that I had really been blessed.

I didn’t recognize it at the time.  But as time goes by and you grow older, the importance of simple moments in your life come to light.  My regret is that I didn’t realize it in time to say “Thank You Ken.”  If I could take back that day, I would not only listen, I would appreciate that someone else was giving me their time for my sake.  If I had done that.  I’m sure I would have ended the day by saying, “Thank you Ken.”

  1. Comments from the original post:

    1. susanhull May 5, 2012

    Ken reminds me of my dad, who, though not a power plant man per se (he was an electrical engineer, that’s pretty close,right?), would give us way more details than we thought we needed. And now I see myself doing it to my grandson (age 11), who is likely to roll his eyes and say, “I already know that!”, when I know darn well he doesn’t. Then I try to resist doing the “I told you so” dance when he finds out he doesn’t already know that. Unfortunately, he does not resist doing the dance when we find out that he did, in fact, already know it!

  2. zensouth May 5, 2012

    I like your blog because the stories are always substantial. It takes a while to take in all the flavor of it, like sampling a fine meal or a rich pastry. I do dislike the visual theme, but I think it forces me to concentrate on the content of the story.

    1. Plant Electrician May 5, 2012

      Thanks Zen, I understand your feelings. A coal-fired power plant is hardly a normal setting. It was built way out in the country because no one really wants one in their backyard. It was the place I called home for many years. I know that when I left I took with me silicon-based ash, a couple of pounds of coal dust and asbestos particles in my lungs. I will not be surprised the day the doctor tells me that I have mesothelioma. I realized after I left, that it wasn’t the place, it was the people that were so dear to me that I called “home”.

  3. jackcurtis May 13, 2012

    I’ve served time with similar folk, people who had more time for a kid learning a job than the kid had for them. Two things stuck besides an entirely different evaluation of those people over time…first one was the old (now): “It ain’t what you don’t know that gets you; it’s what you know that ain’t so.” And the other was, remembering the old guys who had patience with you along the way, it’s always like remembering your parents and you pay it forward…(and I still think you have a book in you)

Advertisements

5 responses

  1. Yes, we should appreciate little lessons of knowledge from caring people.

    Liked by 1 person

  2. Father Paul Lemmen | Reply

    Reblogged this on A Conservative Christian Man.

    Liked by 1 person

  3. No, much as we’d like to there are not any “do overs,” no reset buttons just a need to be careful with our tongues and actions. Thanks!

    Liked by 1 person

  4. […] shifts 7 days a week to do the irrigation for the new grass we were trying to grow (see the post “When Power Plant Men Talk… It Pays To Listen“). When I needed to be at work at 6 am each morning, I walked through the field at 5:15, the sky […]

    Liked by 1 person

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: