Originally Posted May 25, 2013;
Just because there isn’t any smoke pouring out of the smoke stacks at a Coal-fired Power Plant, it doesn’t mean that the plant is offline. The power plant where I worked as an electrician in north central Oklahoma had two large Buell (later GE) electrostatic precipitators. This is what takes the smoke out of the exhaust. The smoke is referred to as “Fly Ash”. The electrostatic precipitator when running efficiently should take out 99.98% of the ash in the exhaust. When running with excellent efficiency, the exhaust can have less ash than dust in the air.
Sonny Kendrick, the electric specialist and Bill Rivers an electronics whiz were my mentors when I joined the electric shop. These two Power Plant Men taught me how to maintain the precipitator. I wrote about the interaction between these two men in the post: Resistance in a Coal-Fired Power Plant. It is funny to think, 30 years later that the skills they were teaching me would determine my career for the next 18 years. You see….. I later became the Precipitator guru of the power plant. I once thought it was sort of a curse to become good at one thing, because then you were kind of expected to do that the rest of your life.
When I first joined the electric shop and they were deciding who was going to fix all the manhole pumps, the electrical A Foreman replied by saying, “Let Kevin do it. He likes to get dirty.” At that point… I think I understood why they really wanted me in the electric shop. Charles Foster had mentioned to me when I was a janitor and he had asked me if I would consider being an electrician because I cleaned things so well, and a lot of being a Power Plant electrician involved cleaning… Now those words took on their full meaning.
I knew I was destined to work on the precipitator from the beginning. Sonny had been banished to work on only the precipitator, as Bill Rivers had made clear to me when I was still a janitor (see the power plant post: Singin’ Along with Sonny Kendrick). I was his chance to be from the curse that had been placed on him by our Electrical Supervisor, Leroy Godfrey. I had accepted that. I knew that I would eventually be the one to maintain the precipitators from day one.
So, here I was… One month before becoming an electrician, I had a near death experience inside the precipitator (See the post: Angel of Death Passes by the Precipitator Door). Now I was going into the precipitator again with Bill Rivers. I think at that time we were just wearing half-faced respirators and no fly ash suit. Just a rain suit.
Not a lot of protection….
I followed Bill Rivers into the precipitator while it was offline for overhaul. I had my flashlight securely strapped around my neck with a string. I had a small notepad with a pen tied to it also around my neck for taking notes.
So, as Bill entered the dark cavern of the precipitator, I found that we had just entered a new world. It was dark… Like the dark side of the moon. We were at the intake of the precipitator and we were walking on top of the ash as it was more like sand at this point. We just left footprints where we only sank about 2 inches into the pile of ash that had built up there.
Bill took his flashlight and shined it up between two sets of plates that are exactly 9 inches apart. He swung the light up toward the top of the precipitator 70 feet above. At first as the light was reflecting on all the white ash, I was blinded to the detail that Bill was trying to show me. Eventually I realized that he was pointing his flashlight at a clip. There was some kind of a clip that held one plate in line with the next.
Once I had confirmed to Bill that I saw where he was looking, he lowered the flashlight to about 45 feet above us, where there was another clip. Then even lower. About 10 feet above us. A third clip. — Now at this point… I was almost ready to resign myself to another lesson like the one I had learned from Ken Conrad as he had poured his heart and soul into his description of how to lay the irrigation hose and position the water gun 3 years earlier (See, “When a Power Plant Man Talks, It pays to Listen“), then I remembered…. “I know this is boring… but you have to learn it….” A Phrase that I made good use of 15 years later when I was teaching switching to a group of True Power Plant Men that would find themselves equally bored with the necessary material they had to learn.
Bill explained….. Each clip must (and he emphasized “Must’) be aligned with the next plate. Every clip must be in their place. Don’t start up this precipitator until this is so. Ok. I understood…. Let’s see… there are three clips between each of the four plates… or 9 plates per row…. and there were 44 rows of plates for each section…. and there were 6 sections across the precipitator, and 7 sections…. hmmm… that added up to oh… only 16,632 clips that I needed to check during each overhaul… ok… I took a note on my notepad…
Bill explained….. Clean each insulator. there is one on the side of each bottle rack holding all the wires in place.There were only 4 for each 2 hoppers. there were 84 hoppers, Great. Only 168 insulators on the bottle racks…. Then he pointed out that there were also insulators on the precipitator roof. two on section over each pair of hoppers… One on the tension hosue on one connected to the transformer, or 336 more… making a total of 504 insulators that need to be inspected and cleaned during each overhaul.
Bill explained…. you need to check each of the wires to make sure they aren’t caught on a ciip or broken. Let’s see…. there were 44 rows of wires in each section… with 16 wires in each row…. and there were 6 sections across each set of hoppers…. that came out to exactly 29568 wires that needed to be inspected during each overhaul.
Bill explained…. each rapper on the roof needs to be tested to make sure they are rapping with the correct force. That meant that they each needed to lift at least 6 inches before they dropped the 15 pound slug (to knock the ash off of the plates into the hoppers below. Hmm… For each 4 hoppers, there were 6 rows of 12 rappers each. There were two sets across the precipitator and there were 7 sets of rappers. In other words…. there were 672 rappers on the roof of the precipitator.
Bill explained…. each vibrator on the roof needs to be calibrated to provide the maximum vibration to the wires inside the precipitator in order to make sure they cleaned the wires of any ash buildup as they are responsible for delivering the static electricity to the precipitator that collects the ash on the plates. In order to calibrate them, you had to adjust the gap between the main bracket and the magnetic coil to within a few thousands of an inch… I don’t remember the exact setting now… but we used a set of shims to set them correctly. There were 12 vibrators for each of the two sides of each of the seven sections of hoppers. This came out to 168 vibrators that need to be adjusted during each overhaul. Oh. And each vibrator had an insulator connected to the wire rack…adding 168 more insulators.
So, we had 16,632 clips, 672 insulators, 29568 wires, 672 rappers and 168 vibrators that all needed to be in good working order at the end of each overhaul (on each of the two units). Throughout the years that I worked inspecting, adjusting and wrestling with plates, clips and wires, I became personally attached to each wire, insulator, clip, rapper and vibrator. For a number of my 18 years as an electrician, I was the only person that entered the precipitator to inspect the plates, wires, clips and internal insulators. Some of my closest friends were precipitator components. Each diligently performing their tasks of cleaning the environment so that millions of people wouldn’t have to breathe the toxins embedded in the ash particles.
We hired contractors to go into the precipitator to help me. I would spend an entire day teaching them how to wear their full face respirator and fly ash suit…. How to inspect the clips and wires…. how to walk along the narrow beams along the edge of each row of 84 hoppers on each unit to find and repair the things that were not in proper alignment. I would check out all their equipment and give them their safety training only to have them not show up for work the next day.
Contractors would gladly be paid to weld in boiler hanging from a sky climber in the middle of space 200 feet above the bottom ash hopper, but give them one day in the precipitator and they would rather be thumbing a ride to Texas…. I should have felt insulted… after all this was my home…. Mark Fielder the head of the welders once called it my “baby”. I knew he had never had to endure the walk on the moon when you entered the tail end of the precipitator and found yourself buried waste deep in light fly ash. I told Mark Fielder to not call the precipitator my baby… Not until he could find a contractor that was willing to work alongside me inside it. He apologized. He explained that he meant it with affection.
At the back end of the precipitator, you just sank to the bottom of a pile of fly ash when you stepped into it. The fly ash particles there are less than 2 microns in diameter. That meant that they would infiltrate your filter and bounce around inside your respirator on their way down into your lungs. Building up a permanent wall of silicon in your innards that will be there until the day you die.
I noticed that after a few days of working in the precipitator that I would feel like I had the flu. This would happen after I would smell this certain scent in the precipitator that would develop after the unit had been offline for a week or so. I noticed that when I burped, I could taste that smell in my mouth. I also noticed that if I had to pass some gas, that the smell would also include the smell that I was experiencing in the precipitator.
I didn’t think much about it until one day when I went to the tool room and Bud Schoonover told me that they were out of the regular hepa-filters for my respirator. So, instead he gave me a pair of organic filters. They had a different carbon filter that absorbed organic particles. I said, “Thanks Bud.” and I headed out to climb into the precipitator to continue my inspection of some 30,000 wires, and 16,000 clips.
To my astonishment, when I used the carbon filters right away, I didn’t smell the acrid smell. The flu symptoms went away, as well as the smelly burping flavors. Not to mention (oh.. but I am) the passing of gas without the additional smell of precipitator internals…. Crazy as these seems… I became obsessed with finding out why.
You see… at the same time that this particular smell arose in the precipitator, any ash that was built up on the plates would clump up and with a simple bang on the plates with a rubber mallet would cause all the ash to fall off leaving a perfectly clean plate. Before this smell was there, you could bang on the plates all day, and the ash would remain stuck to the plates like chalk on a chalkboard.
I had our famous chemist (well…. he was famous to me… see the post: A Power Plant Doctor Does a Jig in a Puddle of Acid), come out to the precipitator to give it a whiff. He said it had some kind of a sewer smell to it…. I didn’t expand on my personal sewer experience I had had with it, though I did tell him about the burping….
He encouraged me to have the safety department come out and test it to see if they could identify the chemical that was causing this smell. You see…. It was important to me because if we could pin this down, then we might be able to inject a substance into the precipitator while it was online to clean it without having to bring the unit offline if the precipitator was to become fouled up.
There was a young lady from the safety department (I think her name was Julia, but I can’t remember her full name). She came from Oklahoma City and gave me some monitors to put in the precipitator while the smell was present to try to track down the chemical. Unfortunately, we never found out what it was. In the meantime, I had learned all I could about Van Der Waals forces. This is the week molecular force that would cause the ash to stick to the plate.
I studied the chemical makeup of the ash to see if I could identify what chemical reactions could take place… Unfortunately, though I knew the chemical makeup of the ash, the chemicals were bound in such a way from the high temperatures of the boiler, that I couldn’t tell exactly how they were arranged without the use of an electron microscope. I wasn’t about to go to Ron Kilman (who was the plant manager at the time) and ask him for one. I had already upset him with another matter as you will learn in a much later post.
So, I just continued wearing the organic filters. This gave me the strength to continue my inspections without the flu-like symptoms. Later on, I taught Charles Foster and Scott Hubbard how to maintain the precipitator. When I finally left in 2001, I know I left the precipitators in competent hands. They knew everything I did.
One main lesson I learned from my experience as the precipitator guru is this….. You can be a genius like Bill Rivers or Sonny Kendrick….. when you are given a particular job to do and you do it well, you are usually pigeon-holed into that job. One of the main reasons I write about Power Plant Men is because they are for the most part a group of geniuses. At least they were at the plant where I worked in North Central Oklahoma. They just happened to stumble onto the jobs that they had. They would probably spend the rest of their working career doing what they did best…. never moving onto something where their genius would shine and others would know about them… That is why I write about them.
Do a job well, and you will be doing it until the day you die…. that’s what it seemed to be. I didn’t feel like I was banished to the precipitator as Sonny Kendrick was by Leroy Godfrey, who did it consciously. No. I was “banished” to the precipitator for the next 18 years because I was good at it. I loved it. I may have mentioned before, but I had a personal relationship with the 168 precipitator control cabinets.
I had carefully re-written the programs on each of the eprom chips on the Central Processing Unit in each cabinet to fit the personality of each section of the precipitator. I had spend hours and hours standing in front of each cabinet talking to them. Coaxing them. Telling them that they could do it with my handheld programmer in hand…. helping them along by adjusting their programming ever so slightly to give them the freedom that they needed to do their job. If they had been human……. I would have given them names like “Mark”, or “Thomas”, or “Millie”. Instead, I knew them as 2E11 or 1B7. But they were each my friends in their own way.
You see… I look at friends like this…. It’s not what they can do for me…. It’s “what can I do for them?” I have had some precipitator cabinets that I have given extra attention because they seemed to need it more than the others, only to have them crap out on me. I wouldn’t have done anything different if I had known all along that they wouldn’t pull through.
I have my own understanding of who I should be. My wife may call it “stubbornness”, and that may be what it is. I would try and try to coax a control cabinet to do what it was created to do, only to have it fail over and over again…. What was I going to do? Give up? How could I do that to a friend? I would tell the cabinets that were especially difficult (when I was alone with them – which was usually), “You create your own Karma. That isn’t going to change who I am.”
Today I am called an IT Business Analyst. I work for Dell Computers. It is an honor to work for a company that serves the entire world. I see the same pattern. When you do something well, when you love your work and become attached to it, you become pigeon-holed into a particular job. You become invaluable. Almost unreplaceable. People look to you for answers. They are comforted to know that someone who cares is taking care of business. I am glad to be able to serve them.
Weeks before I left the power plant, Bill Green, the plant manager asked Jim Arnold (the supervisor over maintenance) again….. “What degree is Kevin getting again?” Arnold replied, “Oh. nothing anyone wants.” (an MIS degree from the college of business at Oklahoma State University). Bill was concerned that if I left they wouldn’t have anyone to take care of the precipitators. No. I wouldn’t do that. Like I said… Each of the 168 precipitator control cabinets were my friends…. I had given them the best guardians I could find… Scott Hubbard and Charles Foster.
Recently Charles Foster has retired from the plant, and his health is not good. His son, Tim Foster has taken his place. One of the last things Tim has told me recently was that he was going with Scott Hubbard to work on the precipitator. I wanted to reply back to his e-mail… take care of my friends Tim…. I know Scott understands….
Each clip, each wire… I often dream about them…. Row after row….. looking 70 feet up, then down… swinging my flashlight in the darkness. Betty, Tom, Martin…. all the clips on this plate are in their place…. Sandy, David, Sarah… lined up correctly… Fred, Chuck, Bill…. good… good… next row….