Originally posted April 25, 2014:
Later in life, thinking back to when I was young, I sometimes wonder at how my first real friend, Mark Schlemper remained my friend throughout my childhood. I remember as a boy, there were times when I wasn’t the friendliest friend. Sometimes I was downright selfish. Mark, on the other hand, was always considerate. Not in an Eddie Haskell way, but in a sincere way. I learned a lot about being a kinder person from Mark, and I’m forever grateful.
I think if Mark had not been my friend during my childhood, then this story would have a very different ending.
Last Friday (April 18, 2014), I posted a story called “Vertan or Sand and Making Enemies of a Power Plant Man“. At the end of that post I explained that I had become the enemy of a team leader during the “We’ve Got The Power” program. I explained this program in the post: “Power Plant ‘We’ve Got The Power’ Program“. With all that said, here is the story:
I was a plant electrician at a coal-fired power plant in North Central Oklahoma when we took part in the “We’ve Got The Power” program. At the time, I was in charge of maintaining the Unit 1 precipitator. The precipitator is what takes the ash out of the exhaust from the boiler, so that you don’t normally see smoke coming out of a Power Plant Smokestack.
My bucket buddy in the Electric Shop, Diana Brien was on a team that tried an experiment on the Unit 1 precipitator by injecting sand into the intake duct in the hope that it would increase the performance. I didn’t put much faith in the experiment, because it was based on something that had happened almost a year earlier when sand was burned in the boiler in order to burn off the oil that had been soaked into the sand.
I hadn’t seen any sand build up in front of the precipitator during the next overhaul, and didn’t believe that any of it had been able to make it’s way through the economizer and the air preheaters to the precipitator.
When Ron Kilman asked me about it, I said that I didn’t think it would do any good, but also, it wouldn’t do any harm either, so I told Ron that I couldn’t see any reason not to do the experiment. Who knows. Maybe something unexpected would happen. — Something did, but not quite in the way anyone would have expected.
On the day of the experiment, sand was blown into the intake duct of the precipitator. When the experiment was taking place, Diana Brien sat at the precipitator computer behind the Unit 1 Alarm Panel in the Control Room. She was printing out readings every so many minutes as the experiment progressed.
At times, I walked by and checked on her to see how it was going. One time when I was standing there watching the readings on the computer, all of the sudden the Opacity shot up. Opacity is used to measure how much smoke is going out of the smoke stack. Something definitely happened to cause a large puff of smoke.
I switched screens to look at the power on each of the control cabinets. After a few seconds I found that cabinet 1A10 had zero Volts on the secondary side of the transformer. It should have been somewhere above 40 Kilovolts. The cabinet hadn’t tripped, but it wasn’t charging up the plates. Cabinet 1A10 was in the very back row of the precipitator, and when the power shuts off on the cabinet it readily lets go of the ash that had built up on it when the rappers on the roof strike the plates.
When I saw the puff occur, I knew where to go look, because this happened whenever one of the back cabinets was turned off. I told Dee that it looked like a fuse had blown on the cabinet. The ash was going to continue billowing out of the precipitator for a couple of hours if I didn’t go do something about it. So, I told Dee that I was going to go to the Precipitator Control Room and replace the fuse.
I passed through the electric shop to grab my tool bucket and headed out to the precipitator. When I arrived, I found the cabinet just as it had indicated on the computer. The fuse had obviously failed. Interesting timing. Coincidence? I thought it was. The fuses controlling the back cabinets were usually the ones that blew because we ran them at a much higher voltage than the rest of the cabinets (at the time).
I quickly replaced the fuse (after attaching grounding cables to the leads, and using a pair of high voltage gloves). Then I powered the cabinet back on.
I returned to the Control Room and told Dee that I replaced the fuse on cabinet 1A10. The opacity had returned to normal. I watched a few more minutes to make sure everything had stabilized, and then I left.
When Ron Kilman was evaluating the results of the experiment, he could plainly see that something strange had happened. Smoke had been pouring out of the smoke stack in the middle of the experiment. So, he asked me what I thought about it.
First of all, as a disclaimer, our team had our own experiments we had been conducting on the precipitator in hopes of coming up with money savings ideas. So, when I told Ron what had happened with the fuse blowing, I wondered if he would trust me to tell the truth, since I had my own skin in the game.
I explained in detail to Ron how the fuse had blown and that I was standing next to Dee watching the computer when the smoke started blowing out of the stack. I could tell that a fuse had blown by looking at the readings, so I went out and replaced the fuse. I told him that fuses do blow periodically in the back of the precipitator, but I couldn’t explain why it happened to fail at that particular time. After I gave him my explanation, he seemed satisfied that I was telling the truth.
I think a token amount of points were awarded to the team because something obviously had happened during the experiment, though it wasn’t clear that sand had anything to do with it. On the other hand, our team was awarded a large amount of points for increasing the precipitator performance using a different method that I may bring up in a later post. To the team that burned the sand, this looked a lot like foul play.
The leader of the team was the Shift Supervisor Jim Padgett. He became very upset when he found out that I had gone to the precipitator control room during the experiment and worked on the equipment. Our team had been awarded a lot of points that was enough to purchase the dining room table set that I have in my dining room today:
It became known throughout the control room and the electric shop that Jim Padgett viewed me as his enemy. The other electricians would jokingly refer to Jim as my “friend”, knowing that Jim had basically declared “war” on me. Any time someone in the shop would have something to say about Jim, they would say, “Kevin’s friend” Jim Padgett….”
When I first became aware that Jim was upset with me, I understood why. If I had been in his shoes I would probably feel the same way. It’s a rotten feeling when you believe that someone has cheated you out of something important. So, I decided up front that I was going to become Jim’s best friend. This is where I think my memory of Mark Schlemper with his patience for me as a boy helped me with this decision.
I had determined that any time Jim asked me to do something I wouldn’t hesitate to help him. It took about a year before Jim could look at me without grimacing. Finally, one day, he asked me if I would go look at something for him to see if we needed a clearance, or if it was something that could be fixed right away. It was something minor, but I knew that this was an indicator that the ice was finally beginning to melt. I was able to fix the problem on the spot, and returned to let him know.
Once we were on semi-speaking terms again, I took an opportunity one day to ask Jim if he would like to join our Computer Club. I had started a Computer Club in the Electric Shop. Anyone could join it for a one time fee of $5.00 that was used to buy shareware and disk cases. For a while I also published a newsletter letting the members of the club know what games and such we had that could be checked out.
Once Jim Padgett joined the Computer Club, it was much easier to have a regular conversation outside of the normal daily business. I had put the thought in my mind when I decided that Jim was going to become my best friend that nothing would make me happier than to be able to do something for Jim. That way, no matter what I was doing at the time, if Jim asked me to do something for him, I would drop whatever I was doing and do my best to help.
I could go on and on explaining how gradually over time, not only was Jim my friend, but Jim acted more and more as if I was his friend as well. Let me just say that the entire process took almost exactly ten years. I can remember the exact moment when Jim indicated to me that I had become his friend.
Here is what happened:
The phone next to my bed rang at 2:15 in the morning on Thursday February 17, 2000. I instantly knew what it meant when the phone rang in the middle of the night. It meant that someone at the plant was calling because there was a problem. Who else would be up on in the middle of the night? The night shift of course.
When I answered the phone, Jim Padgett said, “I hate to wake you up buddy.” I replied, “No. That’s okay. What’s up?” Jim explained that the dumper was down and a train was about halfway through dumping the coal and everything was dead in the water. I said, “Ok. I’ll be right out.”
I turned to Kelly and told her that I had to go fix the dumper. She already knew of course. I pulled on a pair of jeans, a flannel shirt, and on the way out the door, I slipped on my work boots and laced them up. Then I drove the 30 miles out to the plant.
It was just before 3:00 am when I arrived. I grabbed my hardhat from the electric shop and took the elevator up to the Control Room. Jim apologized again and told me that how the dumper acted when it shutdown. I went back down the elevator to the electric shop where I grabbed the key to the pickup truck and my tool bucket and left the electric shop into the cool night air.
Power Plants at night take on magical properties. It’s hard to explain. Lights shining from the 25 story boilers, noises from steam pipes. Hums from motors and transformers. Night Hawks screeching.
When I arrived at the coalyard, I went straight into the Dumper Switchgear where the relays that controlled the dumper were mounted. Having worked on the dumper for the past 17 years, I could troubleshoot the circuits in my sleep. — Actually, I may have done just that. It didn’t take long, and I had replaced a contact on a relay that had broken and had the Coalyard Operator test the dumper long enough to know it was going to work.
When I returned back to Control Room Jim was sitting in the Shift Supervisor’s office. I walked in and showed him the small relay contact that had caused the failure. Jim, looked at me and said something that I thought only a friend would say so casually. I won’t use his exact words, though I remember not only the exact words, I remember his exact expression. He indicated to me that he had passed some gas, and he was apologizing about it. I replied, “Well. That happens.” (No. Not the other thing that happens). I told him I was going to go home. It was about 3:40 by that time.
Jim wished me a good night, and smiling with gratitude, thanked me again for coming out. As I was going back to the parking lot, and on the way home driving through the dark, tired from being woken up in the middle of the night, I had a great feeling of peace. That brief conversation with Jim just before I left was so pleasant in an odd way that I knew we had become friends. This was such a long way from where we had been 10 years earlier when Jim had literally wanted to kill me (well, not that he actually would…).
When I arrived home, I peeled my clothes off in the utility room to keep from tracking coal all over the house. I set the small broken relay contact on the kitchen table as a token to my wife, so she could see why I was called out when she wakes up in the morning. I climbed back into bed around 4:15 to sleep for another two hours.
That morning when I arrived at the plant, the first thing I learned was that about the time that my alarm had woken me up that morning, Jim Padgett had left his shift and driven to his home in Ponca City. When he walked in the door to his house, he collapsed and died instantly of a heart attack. That would have been about 3 hours after the moment that we had said goodbye.
I grieved for Jim’s wife Jane, who had worked for a while at the plant before marrying Jim, but I didn’t grieve for Jim. Something told me, and maybe it was Jim, that he was at peace. In the moment that I heard about Jim’s death, I burned the conversation we had just had that morning into my mind so that I would never forget it.
To this day whenever I know that someone is upset with me for something that I have done to them personally (which still happens occasionally), I am determined that they will become one of my best friends. I will do anything for that person if they ask (unless, of course it is to “not be their friend”). I have my childhood friend Mark Schlemper to thank for the attitude that helped me decide to reach out to Jim Padgett. Without that experience while growing up, Jim and I would never have become friends.
I would like to leave you with a song that reminds me of Jim whenever I hear it. It is called “Bright Eyes” from the movie “Watership Down”. Art Garfunkel sings it:
Note: If you are not able to watch the video above, try clicking this link: Bright Eyes, Art Garfunkel
I’m glad that you were able to work through a tough situation and reach the point of friendship. although, it does make the loss harder to accept.
Your story would have been a matter of course for my grandparents and immediately understood and admired by my parents. I suspect that telling it to today’s children might draw blank stares …
Midwestern values likely still include such behaviors, at least for a reasonable number of people. I doubt many folk on the coasts would identify with it. We have lost a lot and have yet to learn the price of that, seems to me.