Originally posted September 13, 2013:
Of the 1,500 jokes played on Power Plant Men while I was working at the Coal-fired Power Plant in North Central Oklahoma, I can only remember a handful of the smaller ones. There are some I’m saving for later topics. Sometimes it was the smallest jokes that spoke the loudest. Especially when great care was taken to play the joke just right.
I think it was the idea that someone thought enough of you to spend a great deal of time setting up a joke just for the one little moment that the person finally realizes that they have been played. It’s when that smile comes across their face that all that work pays off. The realization that someone else would spend so much time just to make you smile was a good indication that they really did care about you.
In the post called, “Why Stanley Elmore and Other Power Plant Questions” I told a story about when I was a janitor in the electric shop and one of the electricians Andy Tubbs had been playing jokes on me while I was cleaning the bathroom. The funniest one was when I had turned around for a moment and when I went to go grab the dust mop, the handle to the mop was missing, while the dust mop was just sitting there on the floor. The handle was propped against the wall across the shop while Andy was innocently looking at a blueprint. It was so funny I had to go in the bathroom where I literally laughed out loud.
Charles Foster, my electric foremen had told me of a time when he played a joke on a welder in the welding shop that was welding away on something. The power to the welding machine was around the corner. Charles picked up the cord for the welder and kinked it like you would kink a water hose to stop the water from flowing. When he kinked it, the welding machine stopped working.
The welder looked at the machine to find that the power was off. Then he looked over and saw that Charles was standing about 40 feet away grinning at him holding the kinked cable. About that time, Charles straightened out the cable and the welding machine turned back on. The welder spun around to find the welding machine humming away. He looked back at Charles who kinked the cable again and the welding machine again shut off.
Amazed, the welder said something like, “I didn’t know you could do that!” Charles shrugged, dropped the cable and walked off. Unbeknownst to the welder, as Charles left, he met up with the other electrician that had been opening an closing the electric disconnect where the welding machine received its power. Leaving the welder unaware.
In the electric shop there is one bathroom. It is shared by all electricians, and therefore it has a lock on the door because Diana Lucas (Brien) had to use it. But sometimes someone might not realize that it was used jointly by both male and female members of the Power Plant family, and they might not lock the door. So, on occasion, Dee would go into the bathroom only to find that it was already occupied.
Once she entered the bathroom and found that someone was in the stall. She waited around for a while and asked me to go check it out because the guy was taking quite a long time and what at first was only a minor inconvenience was becoming higher priority. So, I entered there bathroom and sure enough. The stall was closed and there was a pair of boots easily visible under the stall where someone sat taking their own sweet time.
Dee finally figured that it wasn’t worth the wait and walked across the T-G floor to the maintenance shop to the nearest women’s restroom. After a while someone else remarked that someone was in the bathroom and had been in there a long time. At that point, it became obvious that either someone had died while sitting on his thinkin’ chair, or something else was definitely amiss.
So, one of the electricians decided to see if everything was all right. That was when they peered into the stall to find that there was only a pair of boots sitting all by themselves in the stall. It turned out that O D McGaha had put them there. He locked the stall, then climbed out under the stall and left them there. — It was a pretty good joke. It had half the shop concerned about the mysterious stranger in the stall.
Soon after this episode, a new sign was placed on the bathroom door:
Other little jokes like that were played on individuals throughout the 20 years that I worked at the plant. One small one that is a typical example of many was when Mickey Postman drove to work one morning with a brand new motorcycle. He was really proud of the new machine. Well. Mickey’s nickname at the time was “Pup”.
Mickey had two main reasons why he was a prime target for having jokes played on him. First, he took the jokes pretty well, because he would have a definite reaction. Sometimes good. Sometimes not so. The second reason was that he was red-headed. That meant that when he realized that a joke was being played on him, his face would turn as red as his hair. Everyone witnessing this couldn’t help but smile.
Mickey had worked his way into the maintenance shop from a janitor as I had, though he missed the labor crew (I believe) because it hadn’t been dreamed up by Ray Butler yet. He and I were practically the same age. He is 7 months older than I am. So, I always felt like, “but for the grace of God go I”. No. I don’t really mean it. I care a lot for Mickey and I never personally considered him as a candidate for jokes. I guess it was because he already had a cohort of Power Plant Men willing to play that part.
So, anyway. Mickey had this shiny new motorcycle parked out in the parking lot all day, so it was inevitable that at least one of the many Power Plant Men that had been assigned to the “Play a Joke on Mickey” detail, would happen to pass by the motorcycle in the parking lot. One of them would have felt obligated to reach down and turn the gas valve off.
The word had gone out throughout the plant that the valve had been closed on Mickey’s motorcycle so that we were all to expect that about the time that Mickey hit the bridge over the discharge on the way out the gate, his motorcycle would run out of fuel and die. It’s times like this that you never forget. A simple joke. A couple hundred Power Plant men all chuckling as they drove across the discharge bridge grinning at Mickey trying to restart his brand new motorcycle that had died perfectly positioned midway across the bridge. His face beaming as red as his hair!
I won’t go into the Wedding present that was given to Mickey Postman the day before his wedding. I intended this post to be only about petty or “minor” jokes. That one was a doozy. Actually. I will never post anything about it, other than to say that I wouldn’t ever say anything about how the machinist’s blue dye was applied.
Machinist’s Blue Dye, or Layout fluid is used when honing down a surface to make sure it is flat. There are other uses for it, but that is the one I am most familiar with. I wonder how that blue color looked along with Mickey’s red face…
Here are examples of two small jokes that took a lot of preparation.
The first one involved Howard Chumbley’s chair. Howard was a foreman in the electric shop. One of the nicest Power Plant Men in all of God’s creation. He was shorter than most taller people. And he was particular about how high his chair was adjusted. Being particular about anything automatically meant that you were a prime target for a joke dealing with whatever you were particular about.
Back then (1984), the height of an office chair was adjusted by turning it upside down and spinning the wheel bracket around to screw in or out the shaft.
So, Charles and I would rotate the bottom of the wheels around 1/4 turn each day. That meant just moving the wheels around to one set of wheels. Not very much. Every week the bracket would only be turned about 1 time, especially given that we wouldn’t remember to do it every day.
Eventually, after 5 or 6 weeks, Howard would go to sit down in his chair and realize that it was lower than he would like it to be. So, he would turn it over and lay the seat on his desk and spin the wheel bracket around a few times. Then test it and do it again until it was just the right height. Howard probably never thought about why every month and a half or so, his chair would be too short and he would end up turning it over and adjusting it back up.
This was a joke that Howard never knew was being played, but every time that chair went upside down, you can bet that Charles and I were grinning from ear-to-ear to have been there to watch it.
Ok. the last story has to be about Gene Day. After all. There was no one that I loved playing jokes on more than Gene Day. Actually, half of them, Gene probably never knew had been jokes. I have written two posts about playing jokes on Gene Day. One of them was just about one joke. See “Psychological Profile of a Control Room Operator” and “Power Plant Humor and Joking with Gene Day“.
So, this particular week, I noticed that Gene Day was the auxiliary operator for Unit 1 Boiler. That meant that at least once each shift he was going to walk through the Unit 1 Precipitator Control Room that housed the controls for the 84 transformers on the precipitator roof.
So, I decided, this was a perfect opportunity to play a petty joke on Gene Day. I took an Eeprom chip that was used to hold the control program for a Precipitator control cabinet, and proceeded to rewrite the program.
I found the code in the assembly language code that sent the message to the display when there was an overcurrent trip. That is, when the cabinet trips, the little LCD display would say: “Overcurrent Trip”. I rewrote the code to say: “Gene Day Trip”. This meant finding the code string: 4F:76:65:72:63:75:72:72:65:6E:74:20:54:72:69:70 and replacing it with: 47:65:6E:65:20:44:61:79:20:54:72:69:70:20:20:20. I wrote the program for a specific cabinet in the middle of the precipitator that I could trip without causing an issue in the general operation of the precipitator.
Then I took the chip to the Precipitator Control room and replaced the control chip for that cabinet and left it running. I had seen Gene Day on his way to the Precipitator Control room the day before, so I had a pretty good idea what time he would be passing through. Because no matter how lazy Gene Day was, he was always consistent. (Gene you know I’m kidding…. right?)
Anyway. I spied Gene leaving the control room around the time I expected, so I made haste to the Precip. Control Room and with my screwdriver, after opening the cabinet, I reached down to the tripping mechanism for an overcurrent trip and I tripped the cabinet. Then leaving from the opposite direction that Gene would be arriving, I slipped out of the Precip Control Room and headed for the plant control room to see Gene’s reaction when he arrived.
About the time I was going around the corner in the breezeway toward the Unit 1 elevator, I saw that Gene had already exited the precip. area, so when I entered the T-G basement I quickly called Gene on the gray phone. Gene turned around and went back in the Precip switchgear (which was just below the control cabinets).
When Gene answered the phone I told him that I was looking at the Precipitator controls in the control room and I saw that one of the cabinets had tripped and I was wondering if he had just been out there because the error indicated something very strange. He said he had just been in there and hadn’t noticed that a cabinet had tripped.
So, I asked him if he could look again, it was 1D8. I needed to know what the cabinet display said had happened because it looked like Gene had done something to it. He told me he hadn’t touched anything, but he would go look. — of course, when he went to look at it, the display showed: “Gene Day Trip”.
So, I was sitting at the precipitator computer for Unit 1 when Gene Day arrived in the Control room. As was typical with Gene Day, my head began to waiver and my eyes began to blur as Gene had grabbed me by the throat and was shaking me back and forth. My eyes may have been blurry, and I know that I was acting totally surprised as if I didn’t know what had happened, but you can believe that inside I was grinning ear-to-ear!