Spending Long Weekends with Power Plant Men Shoveling Coal
Favorites Post #60
Originally posted on: June 1, 2012
The first couple of years while I worked as a summer help at the Coal-Fired Power Plant Coal Cleanup was performed on weekends by volunteer He-Men that wanted to make a few extra dollars. As a summer help, I needed all the extra money I could get. My wages during the first year (1979) were $3.89 an hour.
This jumped to $5.84 an hour when I worked on the weekend, so you can imagine the thrill I had at receiving a paycheck that included the extra money made by doing “Coal Cleanup”. Another great advantage to doing coal cleanup on the weekends was that I was able to carpool with different people. So, during the first summer instead of just riding to work with Steve Higginbotham (See the post “Steve Higginbotham’s Junky Jalopy late for the Boiler Blowdown“), I caught a lot of rides with real Power Plant Men like Dale Hull, David Hankins, Jerry Mitchell, Preston Jenkins and Marlin McDaniel (Yeah. Marlin McDaniel as an A Foreman would volunteer for coal cleanup some times. Maybe it was when we were short a few people).
Coal Cleanup really became important during the second half of the first summer because Unit 1 was getting ready to go online. There was a major flaw in the Coal Conveyor logic when the conveyors first started conveying coal from the coal pile to the coal silos just above the bowl mills. What would happen was the same thing that happens if someone were to fall down at the top of a crowded escalator going up. Everyone behind that person would be shoved right on top of them if there wasn’t an emergency stop button to stop the escalator.
Non Power Plant Escalator
All the conveyors had a safety cord alongside the entire length that could be pulled to stop the conveyor in an emergency, but this was something different.
To give you an idea… once the coal on the coal pile has been fed onto either Belts 4, 5, 6 or 7, from there the coal is dropped onto either belt 8 or 9. That carries the coal up to the coal Crusher which has a bin above the crusher that can be filled with coal. If the bin gets too full, then conveyor 8 and/or 9 would stop. When that happens, belts 4, 5, 6 or 7 should stop also…. only they didn’t. Belts 8 and 9 continued dumping coal into the crusher bin until it filled up and then coal fell out all over the top of the crusher tower around belts 8 and 9 until the coal tripped the belt by hitting the safety cord on the side of the belt. Belts 4, 5, 6 and 7 continued dumping coal onto belts 8 and 9, which caused the coal to backup and spill out all over the floor until the coal piled up high enough to trip the safety cord on the side of the belt.
In the picture of the power plant on the side of this post, there is one long conveyor that goes from the coalyard to the plant. It is about 1/2 mile long. This is where belts 10 and 11 carry the coal from the crusher, which crushes the coal down from big pieces the size of baseballs down to the size of walnuts.
The long belts 10 and 11 were like these only they are in a metal enclosure so the coal didn’t spill out on the ground.
At the top of the Transfer tower the coal from belts 10 and 11 are dumped onto belts 12 and 13 which carry the coal up to the Surge Bin Tower where the coal is dumped into the Surge bin. When the Surge Bin fills up, it stops belts 12 and/or 13 and it should also stop belts 10 and 11 and the feeders that feed the coal into the crusher at the bottom of the crusher bin… only they didn’t.
They continued dumping coal into the Surge bin, which filled up and spilled coal all over the surge bin until belts 12 and 13 tripped, at which point, coal began spilling out all over the transfer tower filling up both floors of the transfer tower with tons of coal. The same thing would happen at the bottom of Belt 10 and 11, where the crusher feeders kept feeding coal down to belts 10 and 11, which spilled out all over the bottom floor of the crusher tower.
I have worked in the transfer tower where the coal was higher than the windows and you had to bend over because your head would hit the ceiling on the floor at the foot of belt 12 and 13. It was almost dangerous enough to picture yourself sliding down the pile of coal and slipping right out one of the windows (which had been broken out by the pile of coal). To give you an idea of what this felt like, it was then a straight drop of 150 feet to the concrete below.
If that doesn’t seem like enough coal spills, then picture this… The coal from the Surge Bin tower fed onto belts 14, 15, 18 and 19 which in turn fed onto belts 16 and 17, 20 and 21. These last 4 belts were in what was called the “Tripper Gallery”. These 4 belts would dump coal into 12 coal silos (6 on each unit) that would feed the bowl mills. These are big silos about 5 stories tall.
The same thing would happen to these belts leaving piles of coal at the bottom of the surge bin in the surge bin tower and all along the tripper gallery because when the coal silos were full, the tripper was supposed to move to the next silo and dump coal until it was full, and keep moving until all the silos were full. Only, the tripper wasn’t working correctly, so it wouldn’t detect that the silo was full so the belt would keep dumping coal and would end up spilling coal all over the entire tripper gallery which runs about 100 feet or so.
So, our first experience with doing coal cleanup was like being on a chain gang where we shoveled coal from morning until night trying to clean up these 15 or so major coal spills from the Trippers on back to the the first belts 4, 5, 6 and 7 by shoveling the coal back onto the conveyor while it was running. In some cases, we had to shovel the coal away from the belt before the belt could even run (as was the case with belts 12 and 13). So, you can imagine how shoveling coal one scoop at a time made it seem like you were not getting anywhere fast. 3 or 4 men could all be shoveling on one pile of coal for 30 minutes and not even make a noticeable dent in the pile. That is why when I went to the tool room to choose a shovel, instead of picking a regular shovel, I picked a large scoop shovel used to scoop grain.
Scoop Shovel
Regular Shovel
Even though each scoop of coal was heavier, it seemed more satisfying to see the bigger dent in the pile of coal with each shovelful. I remember one day after we had shoveled coal all day from morning until late at night only to come back into work the next morning to the new piles of coal just as big as the ones we had shoveled the day before. Once we had cleaned everything up they started up the conveyors again only to have it do the same thing as before.
After 2 years of volunteer coal cleanup which was becoming less volunteer and more rotational since the list of volunteers was growing smaller, Ray Butler pointed out that it didn’t make much sense to pay a first class machinist overtime to shovel coal when you could create a labor crew and pay them bottom dollar to do coal cleanup all the time, as well as other dirty jobs that no one really wanted to do (such as suck out sewage pits and other sump pits around the plant).
That was when the Labor crew was formed. While I was in my 3rd year as a summer help (1981). Bill Cook was a summer help then that stayed on as a labor crew hand at the end of the summer. By the 4th summer as summer help, the only time we did coal cleanup was when there was a major spill, which was only a couple of times all summer.
I will write later about coal cleanup with Dale Hull. I also remember doing coal-cleanup with Preston Jenkins one weekend. I hadn’t carpooled with him to work, but I caught a ride back to Stillwater with him because my ride left at the end of a full day, and I decided to stay behind to add a few extra dollars to my bank account. We left a couple of hours later around seven o’clock.
I climbed into the back of Preston’s Camaro. I apologized for being so dirty, as I was covered from head-to-toe in coal-dust and my clothes were soaked with coal-dust permeated sweat. Preston said that he didn’t mind. I soon found out why.
When I climbed into the backseat of his car, I noticed that the upholstery that covered the seat back of the back seat was stained with some blackish-brownish um…. something. Anyway. I decided to sit on the passenger side of the back seat instead of behind the driver side because that side wasn’t nearly as stained. As we drove down the highway toward home, I quickly learned why the seat back was so stained.
Being the “good-ol’ boy” that Preston was, when he climbed into the car, he took out his can of Skoal and put a pinch between his cheek and gums:
Just a pinch between your cheek and gums…. Never tried it myself.
As we flew down the highway like a Texan heading for Stillwater, Preston would lean his head out the window and squirt out a wad of spit. It would dance in the air like a little fairy just before it would be sucked into the back window of his car and splat against the seat back of the back seat. Yep that explained it all right. I always wondered if he knew, never having to sit in the back seat of his own car.
During the first summer when I was able to catch a ride with David Hankins a couple of times. He was the crane operator at the time and drove a black Trans Am. He was a black man with a very broad chest that never seemed to tire while doing coal cleanup. From the first day he always treated me with great respect which in turn gave me a great respect for him. I had him classified as a true Power Plant Man.
The second summer when I had been back at the plant for a couple of weeks, one day when Jim Heflin and I were going somewhere in a yellow Cushman cart, I asked Jim why I hadn’t seen David Hankins around.
A Cushman Cart Like this only Yellow
Jim (who hadn’t been at the plant the first summer) stopped the cart in the middle of the road and looked at me very solemnly and told me that David Hankins had died in a car accident in the spring. He had been going home from a Men’s Club event when he was killed. Because of this, alcoholic beverages were no longer allowed at Men’s Club events. As with all the people I have worked with at the power plant, I keep David Hankins in my memory and I often think about him to this day. David Hankins was a True Power Plant Man.
Comments from the original Post:
-
neenergyobserver June 1, 2012 as 6:28 pm
We’ve lost so many friends over the years, in the plants and on the line, especially when they were relaxing on their way home. You, and David’s family have my very belated condolences.
Somebody, somewhere, needs to teach engineers a course on Conveyor Logic 101, I’ve seen the same thing happen in nearly every plant (from automotive, rarely, to meat packing, often) I’ve been in. Or they could, just for once in their life, shut their pie-hole and listen to people like you and me.
-
Plant Electrician June 1, 2012 at 11:39 pm
Thanks Nebraska.
We were often exhausted while driving home from work when we had been working a lot of overtime. It was a wonder sometimes that we were able to keep the car on the road.
My uncle Bill Breazile worked for the Utility company in Nebraska City where someone closed a breaker while he was working on a line. He was in the hospital for about 6 months healing from his burns. This was about 30 years ago. He has since passed away. It takes a special person to be a lineman. Putting their life on the line every time they reach out to do their job.
-
neenergyobserver June 2, 2012 at 10:42 am
Not that different from you. It’s all about planning your work, and doing it right, and safely. You and I know that 480 will kill you just as quick as 7200 if you get careless. That’s why almost all (old) linemen and electricians are in some sense stolid and unexcitable.
-
-
-
jackcurtis July 14, 2012 at 12:59 pm
Industrial America returns in stories and comments in places like this, from the only place it still exists: the minds of those who were part of it. Industrial America was a giant; those who manned it were giant tamers and it seems to me, very much the special breed illuminated in these posts…
Comment from last repost:
Spending Long Weekends with Power Plant Men Shoveling Coal
Originally posted on: June 1, 2012
The first couple of years while I worked as a summer help at the Coal-Fired Power Plant Coal Cleanup was performed on weekends by volunteer He-Men that wanted to make a few extra dollars. As a summer help, I needed all the extra money I could get. My wages during the first year (1979) were $3.89 an hour.
This jumped to $5.84 an hour when I worked on the weekend, so you can imagine the thrill I had at receiving a paycheck that included the extra money made by doing “Coal Cleanup”. Another great advantage to doing coal cleanup on the weekends was that I was able to carpool with different people. So, during the first summer instead of just riding to work with Steve Higginbotham (See the post “Steve Higginbotham’s Junky Jalopy late for the Boiler Blowdown“), I caught a lot of rides with real Power Plant Men like Dale Hull, David Hankins, Jerry Mitchell, Preston Jenkins and Marlin McDaniel (Yeah. Marlin McDaniel as an A Foreman would volunteer for coal cleanup some times. Maybe it was when we were short a few people).
Coal Cleanup really became important during the second half of the first summer because Unit 1 was getting ready to go online. There was a major flaw in the Coal Conveyor logic when the conveyors first started conveying coal from the coal pile to the coal silos just above the bowl mills. What would happen was the same thing that happens if someone were to fall down at the top of a crowded escalator going up. Everyone behind that person would be shoved right on top of them if there wasn’t an emergency stop button to stop the escalator.
Escalator
All the conveyors had a safety cord alongside the entire length that could be pulled to stop the conveyor in an emergency, but this was something different.
To give you an idea… once the coal on the coal pile has been fed onto either Belts 4, 5, 6 or 7, from there the coal is dropped onto either belt 8 or 9. That carries the coal up to the coal Crusher which has a bin above the crusher that can be filled with coal. If the bin gets too full, then conveyor 8 and/or 9 would stop. When that happens, belts 4, 5, 6 or 7 should stop also…. only they didn’t. Belts 8 and 9 continued dumping coal into the crusher bin until it filled up and then coal fell out all over the top of the crusher tower around belts 8 and 9 until the coal tripped the belt by hitting the safety cord on the side of the belt. Belts 4, 5, 6 and 7 continued dumping coal onto belts 8 and 9, which caused the coal to backup and spill out all over the floor until the coal piled up high enough to trip the safety cord on the side of the belt.
In the picture of the power plant on the side of this post, there is one long conveyor that goes from the coalyard to the plant. It is about 1/2 mile long. This is where belts 10 and 11 carry the coal from the crusher, which crushes the coal down from big pieces the size of baseballs down to the size of walnuts.
The long belts 10 and 11 were like these only they are in a metal enclosure so the coal didn’t spill out on the ground.
At the top of the Transfer tower the coal from belts 10 and 11 are dumped onto belts 12 and 13 which carry the coal up to the Surge Bin Tower where the coal is dumped into the Surge bin. When the Surge Bin fills up, it stops belts 12 and/or 13 and it should also stop belts 10 and 11 and the feeders that feed the coal into the crusher at the bottom of the crusher bin… only they didn’t.
They continued dumping coal into the Surge bin, which filled up and spilled coal all over the surge bin until belts 12 and 13 tripped, at which point, coal began spilling out all over the transfer tower filling up both floors of the transfer tower with tons of coal. The same thing would happen at the bottom of Belt 10 and 11, where the crusher feeders kept feeding coal down to belts 10 and 11, which spilled out all over the bottom floor of the crusher tower.
I have worked in the transfer tower where the coal was higher than the windows and you had to bend over because your head would hit the ceiling on the floor at the foot of belt 12 and 13. It was almost dangerous enough to picture yourself sliding down the pile of coal and slipping right out one of the windows (which had been broken out by the pile of coal). To give you an idea of what this felt like, it was then a straight drop of 150 feet to the concrete below.
If that doesn’t seem like enough coal spills, then picture this… The coal from the Surge Bin tower fed onto belts 14, 15, 18 and 19 which in turn fed onto belts 16 and 17, 20 and 21. These last 4 belts were in what was called the “Tripper Gallery”. These 4 belts would dump coal into 12 coal silos (6 on each unit) that would feed the bowl mills. These are big silos about 5 stories tall.
The same thing would happen to these belts leaving piles of coal at the bottom of the surge bin in the surge bin tower and all along the tripper gallery because when the coal silos were full, the tripper was supposed to move to the next silo and dump coal until it was full, and keep moving until all the silos were full. Only, the tripper wasn’t working correctly, so it wouldn’t detect that the silo was full so the belt would keep dumping coal and would end up spilling coal all over the entire tripper gallery which runs about 100 feet or so.
So, our first experience with doing coal cleanup was like being on a chain gang where we shoveled coal from morning until night trying to clean up these 15 or so major coal spills from the Trippers on back to the the first belts 4, 5, 6 and 7 by shoveling the coal back onto the conveyor while it was running. In some cases, we had to shovel the coal away from the belt before the belt could even run (as was the case with belts 12 and 13). So, you can imagine how shoveling coal one scoop at a time made it seem like you were not getting anywhere fast. 3 or 4 men could all be shoveling on one pile of coal for 30 minutes and not even make a noticeable dent in the pile. That is why when I went to the tool room to choose a shovel, instead of picking a regular shovel, I picked a large scoop shovel used to scoop grain.
Scoop Shovel
Regular Shovel
Even though each scoop of coal was heavier, it seemed more satisfying to see the bigger dent in the pile of coal with each shovelful. I remember one day after we had shoveled coal all day from morning until late at night only to come back into work the next morning to the new piles of coal just as big as the ones we had shoveled the day before. Once we had cleaned everything up they started up the conveyors again only to have it do the same thing as before.
After 2 years of volunteer coal cleanup which was becoming less volunteer and more rotational since the list of volunteers was growing smaller, Ray Butler pointed out that it didn’t make much sense to pay a first class machinist overtime to shovel coal when you could create a labor crew and pay them bottom dollar to do coal cleanup all the time, as well as other dirty jobs that no one really wanted to do (such as suck out sewage pits and other sump pits around the plant).
That was when the Labor crew was formed. While I was in my 3rd year as a summer help (1981). Bill Cook was a summer help then that stayed on as a labor crew hand at the end of the summer. By the 4th summer as summer help, the only time we did coal cleanup was when there was a major spill, which was only a couple of times all summer.
I will write later about coal cleanup with Dale Hull. I also remember doing coal-cleanup with Preston Jenkins one weekend. I hadn’t carpooled with him to work, but I caught a ride back to Stillwater with him because my ride left at the end of a full day, and I decided to stay behind to add a few extra dollars to my bank account. We left a couple of hours later around seven o’clock.
I climbed into the back of Preston’s Camaro. I apologized for being so dirty, as I was covered from head-to-toe in coal-dust and my clothes were soaked with coal-dust permeated sweat. Preston said that he didn’t mind. I soon found out why.
When I climbed into the backseat of his car, I noticed that the upholstery that covered the seat back of the back seat was stained with some blackish-brownish um…. something. Anyway. I decided to sit on the passenger side of the back seat instead of behind the driver side because that side wasn’t nearly as stained. As we drove down the highway toward home, I quickly learned why the seat back was so stained.
Being the “good-ol’ boy” that Preston was, when he climbed into the car, he took out his can of Skoal and put a pinch between his cheek and gums:
Just a pinch between your cheek and gums…. Never tried it myself.
As we flew down the highway like a Texan heading for Stillwater, Preston would lean his head out the window and squirt out a wad of spit. It would dance in the air like a little fairy just before it would be sucked into the back window of his car and splat against the seat back of the back seat. Yep that explained it all right. I always wondered if he knew, never having to sit in the back seat of his own car.
During the first summer when I was able to catch a ride with David Hankins a couple of times. He was the crane operator at the time and drove a black Trans Am. He was a black man with a very broad chest that never seemed to tire while doing coal cleanup. From the first day he always treated me with great respect which in turn gave me a great respect for him. I had him classified as a true Power Plant Man.
The second summer when I had been back at the plant for a couple of weeks, one day when Jim Heflin and I were going somewhere in a yellow Cushman cart, I asked Jim why I hadn’t seen David Hankins around.
A Cushman Cart Like this only Yellow
Jim (who hadn’t been at the plant the first summer) stopped the cart in the middle of the road and looked at me very solemnly and told me that David Hankins had died in a car accident in the spring. He had been going home from a Men’s Club event when he was killed. Because of this, alcoholic beverages were no longer allowed at Men’s Club events. As with all the people I have worked with at the power plant, I keep David Hankins in my memory and I often think about him to this day. David Hankins was a True Power Plant Man.
Comments from the original Post:
-
neenergyobserver June 1, 2012 as 6:28 pm
We’ve lost so many friends over the years, in the plants and on the line, especially when they were relaxing on their way home. You, and David’s family have my very belated condolences.
Somebody, somewhere, needs to teach engineers a course on Conveyor Logic 101, I’ve seen the same thing happen in nearly every plant (from automotive, rarely, to meat packing, often) I’ve been in. Or they could, just for once in their life, shut their pie-hole and listen to people like you and me.
-
Plant Electrician June 1, 2012 at 11:39 pm
Thanks Nebraska.
We were often exhausted while driving home from work when we had been working a lot of overtime. It was a wonder sometimes that we were able to keep the car on the road.
My uncle Bill Breazile worked for the Utility company in Nebraska City where someone closed a breaker while he was working on a line. He was in the hospital for about 6 months healing from his burns. This was about 30 years ago. He has since passed away. It takes a special person to be a lineman. Putting their life on the line every time they reach out to do their job.
-
neenergyobserver June 2, 2012 at 10:42 am
Not that different from you. It’s all about planning your work, and doing it right, and safely. You and I know that 480 will kill you just as quick as 7200 if you get careless. That’s why almost all (old) linemen and electricians are in some sense stolid and unexcitable.
-
-
-
jackcurtis July 14, 2012 at 12:59 pm
Industrial America returns in stories and comments in places like this, from the only place it still exists: the minds of those who were part of it. Industrial America was a giant; those who manned it were giant tamers and it seems to me, very much the special breed illuminated in these posts…
Comment from last repost:
-
I remember a time when I would have chose the bigger shovel, perhaps in the early 70’s. I was moving steel in a manufacturing plant. Carrying three bars on each shoulder seemed better than the two they suggested. We finished earlier, had to do other work, but somehow it felt better. Thanks for another interesting story and a wake-up call to younger days. Thanks also for the explanations. I love mechanical things and I get the impression that these plants are one big mechanical adventure.
-
Power Plant Invocations and Imitations of Sonny Karcher
Originally Posted on June 16, 2012:
I have mentioned before that Sonny Karcher was one of the first Power Plant Men that taught me how to work my way up the ladder of Power Plant Ingenuity (In the post titled, In Memory of Sonny Karcher A True Power Plant Man). I used to come home from work after Steve Higginbotham dropped me off at the duplex where we were living at the time (see the post Steve Higginbotham and His Junky Jalopy late for the Boiler Blowdown), and my family couldn’t wait to hear what Sonny Karcher had said or done that day.
Sonny Karcher
Soon after I had arrived at the plant one day, after coming back from the coal yard, Sonny had just dropped me off at the front of the Maintenance shop where I was going to the tool room to get some tools for something we were going to do. Sonny was going to drive around behind the tool room in a yellow Cushman cart to pick up some larger equipment, and I was going to meet him there.
Like this only Yellow
As he was backing out of the shop he suddenly made a motion with his left hand. To me it looked like he was making the movement that someone would make if they were taking the lid off of a jar. I thought this meant that he wanted me to do something, but I couldn’t figure out what it was.
Various things went through my head, such as, I should get something to help remove lids from barrels. Or I needed to look inside of a jar to find one of the parts I was going to pick up. Nothing made much sense to me, so I waved for him to come back.
When he did, I asked him what he wanted me to do. He asked me what I meant. I told him that when he made that motion to open a jar, I couldn’t figure out what he wanted. So he told me. “I was just waving goodbye.”
He gave me a big smile and backed out of the shop again. Each time Sonny Karcher waved goodbye, he used a different motion with his hand. Sometimes he would look like he was twirling something on his finger. Sometimes it seemed like he was trying to get something sticky off of his fingers. Sometimes he just drew circles in the air with a couple of fingers. Other times he looked like he was giving an awkward kind of salute. Sonny made an art out of simple things like a wave goodbye.
That first summer it seemed like everyone was always munching on Sunflower seeds. There were bags of sunflower seeds everywhere you looked. Sonny already looked somewhat like a chipmunk with puffy round cheeks that formed from years of wearing a grin on his face. They were extra prominent when his cheeks were full of sunflower seeds. These were seeds still in their shells.
Power Plant Sunflower Seeds
So, it was normal to see someone take a step back while standing around talking, turn their head and drop a few sunflower seed shells from their mouth into the floor drains that were spaced evenly across the maintenance shop floor. There came a time when those drains had to be cleaned out because it seemed that every drain was packed solid full of sunflower seed shells.
Sunflowers weren’t the only items found in the drains, since chewing (or dipping) tobacco (such as Skoal) was used by a lot of the men in the Power Plant.
Just a pinch between your cheek and gums…. Never tried it myself.
Cleaning out a drain full of sunflower seeds, dipping tobacco and spit was a job that might cause a lot of people to gag, and I know I had to fight it back at the time. Most of the time I felt like I was having too much fun to get paid for working at the plant, but when it came time for cleaning out those drains, I felt like I was really working very hard for the $3.89 an hour that I was getting paid my first summer (1979) as a summer help.
But anyway, back to Sonny. I remember one evening when I came home after working with Sonny during the day, and we were sitting around the dinner table eating supper when my dad said something surprising. I don’t remember exactly what he said, but I remember what my response was. It came out before I thought what I was saying, and I said it with the same surprised smile Sonny would have. I replied, “Well S–t the bed!” With a heavy emphasis on each word.
That was a common phrase that Sonny used, and it was his response to anything surprising. Needless to say, I don’t normally use four letter words that have to be edited out of a post. It was just the matter of fact way that Sonny would use that phrase that made it seem all right to say at the time. If I remember correctly, both my mom and my dad stared at me for a second in disbelief, then broke out laughing as they had never heard that particular phrase. It was kind of like hearing “…Bless his heart” for the first time when used following an obvious insult.
In the year 1990 the Power Plant had a program that they called, “We’ve Got the Power”. I will talk more about this in a later post, so I will just say that it was a program where we broke up into teams and tried to find ways to save the company money. But long before “We’ve Got the Power”, there was Sonny Karcher. He was often trying to figure out how we could make electricity cheaper, or even come up with other ways of making a profit.
One day Sonny asked me this, “Kev, your smart because you learn things from all those books at school so tell me this… someone said the other day that diamonds are made out of coal. Is that true?” I told him it was. Then he said, “Well, what if we had one of those big dirt movers full of coal drive over some coal a bunch of times, would we be able to make diamonds?”
Dirt Mover full of coal
I told him that wouldn’t work because it takes a lot more pressure to make a diamond. So, he asked me if it would work if we put some coal on the railroad track and we let an entire train full of coal run over it. Would it make a diamond then? I assured him that even that wouldn’t make a diamond. He accepted it and just said, “Well, it’s too bad since we have that big pile of coal there, we ought to be able to come up with some way of turning them into diamonds.
Another time when we were cleaning out the fish baskets at the intake (a job as smelly as it sounds) next to the 4 big intake pumps. These are the pumps that pump around 189,000 gallons of water per minute each. Sonny told me how big those pumps were and how much water they pumped. Then he said, “You know, that entire boiler is there just to make steam to turn the turbine to make electricity. It seems to me that we could just take these four pumps and have them pump water through the turbine and have it turn the turbines, then we wouldn’t need those big boilers. Why don’t we do something like that?” I assured Sonny that we would never be able to make enough electricity to make up for the electricity it took to turn the pumps that were pumping the water. He shook his head and said that it just seemed to him that those pumps could turn that turbine pretty fast.
One day I watched as Sonny watched another Power Plant man walk into the shop with a new type of lunch box. It was an Igloo Little Playmate. Sonny made a comment about how neat this guy’s new lunch box was. It was a new design at the time.
One exactly like this. These were a new kind of lunch box at the time.
Sonny immediately went out and bought one. The next week he came to work with his shiny new Little Playmate lunch box. I admit. I went and bought one myself a few weeks later. But this was the beginning of a trend that I noticed with Sonny. I began to notice that Sonny seemed to pick one item from each of the people he admired, and went and bought one for himself. Or he would pick up a phrase that someone else would say, and would start using that.
At first I thought it might just be a coincidence, so I started to test my hypothesis. When I would see something new that Sonny brought to work, I would look around to see who else had one of those, and sure enough. Someone close by would have one. Then I would hear Sonny talk a certain way. His accent would change and he would say something like he was imitating someone else, and usually I could tell right away who talked like that and knew that Sonny had borrowed that phrase from that person.
Some may think that this would be annoying, but I think with Sonny it was an act of endearment. It was his way of connecting with those people that he admired. Sonny had a small yellow orange Ford truck and I figured that someone else must have a truck like that, so I started looking all around for one like it. It took me a couple of weeks, but one morning while we were carpooling our way to the power plant, we came up behind the same kind of truck that Sonny had on its way to the plant. It was green instead of yellow, but it was undoubtedly the same model of truck. It was owned by Ken Reece, who was the manager over the tool room and warehouse.
Sonny imitated a voice that had me puzzled for a while. I had checked out all the Power Plant Men around trying to figure out who Sonny was imitating. Every once in a while Sonny would change his way of talking when he was making a point where he would let his lower lip come forward and work its way left and right as he talked, and he would close one eye more than the other and talk in a strange sort of a southern drawl. I just knew he was imitating someone because it was so different than just the regular Sonny.
Finally, one day when I was walking through the shop I heard someone in the welding area talking just like Sonny would talk when he used that voice. There was no mistake. That had to be the person. I could hear every inflection in his voice and it had to be the voice that Sonny was imitating because it had been much more honed and refined to give just the right effect. So, I changed the course I was travelling so that I could make my way around to the welders to see who it was that was talking like that.
There in the middle of the welding shop was a heavier set man standing in the middle of a group of welders telling a story. Everyone was listening to him quietly just as if it was story time at the library. So, I stopped and watched. This man wasn’t wearing an Electric Company hard hat. He was wearing a Brown and Root hard hat, which indicated that he worked for the construction company that was building the plant.
This guy was undoubtedly a master storyteller. When it came to the climactic part of the story, the bottom of his mouth would stick out with his lip moving left and right and left again, and one eye was partially closed to show the intensity of the situation and the drawl would intensify. Finally. I had found the man that Sonny Karcher had admired enough to take one of his favorite traits and connect it to himself. I could see why Sonny admired him so much. He had everyone within listening distance captivated by his story.
This Brown and Root hand soon became an employee of the Electric Company within a couple of weeks after I left at the end of the summer (on September 9, 1979). This heavier set person was still working at the plant when I first posted this story last year, but has since retired. He was one of this country’s leading Turbine mechanics and he can still tell a story like no one else. He is no longer as heavy. He is rather thin in comparison. He improved his health after realizing that if he really loved his family, he needed to take better care of himself.
I consider this True Power Plant Man, Ray Eberle, to be a dear friend of mine. I have never met anyone that looked more like my own grandfather than Ray. Not that he was that much older. No. He looked almost exactly like my grandfather looked when he was Ray’s age. There was no nicer man than my dad’s dad, and there is no nicer Power Plant Man than Ray Eberle.
Ray Eberle
Comments from the re-post:
-
The Janitors at Seminole showed me how the PPM (Power Plant Men) were spitting their tobacco juice inside I-beam webs, in tight corners, and other hard to clean spots. They asked me to put out a memo asking the spitters to just spit out in the middle of the floor so they could clean it up much easier, which I did. I can’t remember for sure, but it seems like the puddles of stinky gross slime around the Plant tailed off for a while.
Good story, Kevin. I hadn’t thought about Ray Eberle for a long time. He was a super turbine man I always enjoyed being around. I just remember his competence and his positive attitude.
-
It’s both amusing, and comforting to know the same things happen at power plants everywhere, we went through a “sunflower seed phase” which plugged the drains & the plant finally came up with a “NO MORE SUNFLOWER SEEDS” rule!
Spending Long Weekends with Power Plant Men Shoveling Coal
Originally posted on: June 1, 2012
The first couple of years while I worked as a summer help at the Coal-Fired Power Plant Coal Cleanup was performed on weekends by volunteer He-Men that wanted to make a few extra dollars. As a summer help, I needed all the extra money I could get. My wages during the first year (1979) were $3.89 an hour.
This jumped to $5.84 an hour when I worked on the weekend, so you can imagine the thrill I had at receiving a paycheck that included the extra money made by doing “Coal Cleanup”. Another great advantage to doing coal cleanup on the weekends was that I was able to carpool with different people. So, during the first summer instead of just riding to work with Steve Higginbotham (See the post “Steve Higginbotham’s Junky Jalopy late for the Boiler Blowdown“), I caught a lot of rides with real Power Plant Men like Dale Hull, David Hankins, Jerry Mitchell, Preston Jenkins and Marlin McDaniel (Yeah. Marlin McDaniel as an A Foreman would volunteer for coal cleanup some times. Maybe it was when we were short a few people).
Coal Cleanup really became important during the second half of the first summer because Unit 1 was getting ready to go online. There was a major flaw in the Coal Conveyor logic when the conveyors first started conveying coal from the coal pile to the coal silos just above the bowl mills. What would happen was the same thing that happens if someone were to fall down at the top of a crowded escalator going up. Everyone behind that person would be shoved right on top of them if there wasn’t an emergency stop button to stop the escalator.
Escalator
All the conveyors had a safety cord alongside the entire length that could be pulled to stop the conveyor in an emergency, but this was something different.
To give you an idea… once the coal on the coal pile has been fed onto either Belts 4, 5, 6 or 7, from there the coal is dropped onto either belt 8 or 9. That carries the coal up to the coal Crusher which has a bin above the crusher that can be filled with coal. If the bin gets too full, then conveyor 8 and/or 9 would stop. When that happens, belts 4, 5, 6 or 7 should stop also…. only they didn’t. Belts 8 and 9 continued dumping coal into the crusher bin until it filled up and then coal fell out all over the top of the crusher tower around belts 8 and 9 until the coal tripped the belt by hitting the safety cord on the side of the belt. Belts 4, 5, 6 and 7 continued dumping coal onto belts 8 and 9, which caused the coal to backup and spill out all over the floor until the coal piled up high enough to trip the safety cord on the side of the belt.
In the picture of the power plant on the side of this post, there is one long conveyor that goes from the coalyard to the plant. It is about 1/2 mile long. This is where belts 10 and 11 carry the coal from the crusher, which crushes the coal down from big pieces the size of baseballs down to the size of walnuts.
The long belts 10 and 11 were like these only they are in a metal enclosure so the coal didn’t spill out on the ground.
At the top of the Transfer tower the coal from belts 10 and 11 are dumped onto belts 12 and 13 which carry the coal up to the Surge Bin Tower where the coal is dumped into the Surge bin. Now when the Surge Bin fills up, it stops belts 12 and/or 13 and it should also stop belts 10 and 11 and the feeders that feed the coal into the crusher at the bottom of the crusher bin… only they didn’t.
They continued dumping coal into the Surge bin, which filled up and spilled coal all over the surge bin until belts 12 and 13 tripped, at which point, coal began spilling out all over the transfer tower filling up both floors of the transfer tower with tons of coal. The same thing would happen at the bottom of Belt 10 and 11, where the crusher feeders kept feeding coal down to belts 10 and 11, which spilled out all over the bottom floor of the crusher tower.
I have worked in the transfer tower where the coal was higher than the windows and you had to bend over because your head would hit the ceiling on the floor at the foot of belt 12 and 13. It was almost dangerous enough to picture yourself sliding down the pile of coal and slipping right out one of the windows (which had been broken out by the pile of coal). To give you an idea of what this felt like, it was then a straight drop of 150 feet to the concrete below.
If that doesn’t seem like enough coal spills, then picture this… The coal from the Surge Bin tower fed onto belts 14, 15, 18 and 19 which in turn fed onto belts 16 and 17, 20 and 21. These last 4 belts were in what was called the “Tripper Gallery”. These 4 belts would dump coal into 12 coal silos (6 on each unit) that would feed the bowl mills. These are big silos about 5 stories tall.
The same thing would happen to these belts leaving piles of coal at the bottom of the surge bin in the surge bin tower and all along the tripper gallery because when the coal silos were full, the tripper was supposed to move to the next silo and dump coal until it was full, and keep moving until all the silos were full. Only, the tripper wasn’t working correctly, so it wouldn’t detect that the silo was full so the belt would keep dumping coal and would end up spilling coal all over the entire tripper gallery which runs about 100 feet or so.
So, our first experience with doing coal cleanup was like being on a chain gang where we shoveled coal from morning until night trying to clean up these 15 or so major coal spills by shoveling the coal back onto the conveyor while it was running. In some cases, we had to shovel the coal away from the belt before the belt could even run (as was the case with belts 12 and 13). So, you can imagine how shoveling coal one scoop at a time made it seem like you were not getting anywhere fast. 3 or 4 men could all be shoveling on one pile of coal for 30 minutes and not even make a noticeable dent in the pile. That is why when I went to the tool room to choose a shovel, instead of picking a regular shovel, I picked a large scoop shovel used to scoop grain.
Scoop Shovel
Regular Shovel
Even though each scoop of coal was heavier, it seemed more satisfying to see the bigger dent in the pile of coal with each shovelful. I remember one day after we had shoveled coal all day from morning until late at night only to come back into work the next morning to the new piles of coal just as big as the ones we had shoveled the day before.
After 2 years of volunteer coal cleanup which was becoming less volunteer and more rotational since the list of volunteers was growing smaller, Ray Butler pointed out that it didn’t make much sense to pay a first class machinist overtime to shovel coal when you could create a labor crew and pay them bottom dollar to do coal cleanup all the time, as well as other dirty jobs that no one really wanted to do (such as suck out sewage pits and other sump pits around the plant).
That was when the Labor crew was formed. While I was in my 3rd year as a summer help (1981). Bill Cook was a summer help then that stayed on as a labor crew hand at the end of the summer. By the 4th summer as summer help, the only time we did coal cleanup was when there was a major spill, which was only a couple of times all summer.
I will write later about coal cleanup with Dale Hull. I also remember doing coal-cleanup with Preston Jenkins one weekend. I hadn’t carpooled with him to work, but I caught a ride back to Stillwater with him because my ride left at the end of a full day, and I decided to stay behind to add a few extra dollars to my bank account. We left a couple of hours later around seven o’clock.
I climbed into the back of Preston’s Camaro. I apologized for being so dirty, as I was covered from head-to-toe in coal-dust and my clothes were soaked with coal-dust permeated sweat. Preston said that he didn’t mind. I soon found out why.
When I climbed into the backseat of his car, I noticed that the upholstery that covered the seat back of the back seat was stained with some blackish-brownish um…. something. Anyway. I decided to sit on the passenger side of the back seat instead of behind the driver side because that side wasn’t nearly as stained. As we drove down the highway toward home, I quickly learned why the seat back was so stained.
Being the “good-ol’ boy” that Preston was, when he climbed into the car, he took out his can of Skoal and put a pinch between his cheek and gums:
Just a pinch between your cheek and gums…. Never tried it myself.
As we flew down the highway like a Texan heading for Stillwater, Preston would lean his head out the window and squirt out a wad of spit. It would dance in the air like a little fairy just before it would be sucked into the back window of his car and splat against the seat back of the back seat. Yep that explained it all right. I always wondered if he knew, never having to sit in the back seat of his own car.
During the first summer when I was able to catch a ride with David Hankins a couple of times. He was the crane operator at the time and drove a black Trans Am. He was a black man with a very broad chest that never seemed to tire while doing coal cleanup. From the first day he always treated me with great respect which in turn gave me a great respect for him. I had him classified as a true Power Plant Man.
The second summer when I had been back at the plant for a couple of weeks, one day when Jim Heflin and I were going somewhere in a yellow Cushman cart, I asked Jim why I hadn’t seen David Hankins around.
A Cushman Cart Like this only Yellow
Jim (who hadn’t been at the plant the first summer) stopped the cart in the middle of the road and looked at me very solemnly and told me that David Hankins had died in a car accident in the spring. He had been going home from a Men’s Club event when he was killed. Because of this, alcoholic beverages were no longer allowed at Men’s Club events. As with all the people I have worked with at the power plant, I keep David Hankins in my memory and I often think about him to this day. David Hankins was a True Power Plant Man.
Comments from the original Post:
-
neenergyobserver June 1, 2012 as 6:28 pm
We’ve lost so many friends over the years, in the plants and on the line, especially when they were relaxing on their way home. You, and David’s family have my very belated condolences.
Somebody, somewhere, needs to teach engineers a course on Conveyor Logic 101, I’ve seen the same thing happen in nearly every plant (from automotive, rarely, to meat packing, often) I’ve been in. Or they could, just for once in their life, shut their pie-hole and listen to people like you and me.
-
Plant Electrician June 1, 2012 at 11:39 pm
Thanks Nebraska.
We were often exhausted while driving home from work when we had been working a lot of overtime. It was a wonder sometimes that we were able to keep the car on the road.
My uncle Bill Breazile worked for the Utility company in Nebraska City where someone closed a breaker while he was working on a line. He was in the hospital for about 6 months healing from his burns. This was about 30 years ago. He has since passed away. It takes a special person to be a lineman. Putting their life on the line every time they reach out to do their job.
-
neenergyobserver June 2, 2012 at 10:42 am
Not that different from you. It’s all about planning your work, and doing it right, and safely. You and I know that 480 will kill you just as quick as 7200 if you get careless. That’s why almost all (old) linemen and electricians are in some sense stolid and unexcitable.
-
-
-
jackcurtis July 14, 2012 at 12:59 pm
Industrial America returns in stories and comments in places like this, from the only place it still exists: the minds of those who were part of it. Industrial America was a giant; those who manned it were giant tamers and it seems to me, very much the special breed illuminated in these posts…
Comment from last repost:
-
I remember a time when I would have chose the bigger shovel, perhaps in the early 70’s. I was moving steel in a manufacturing plant. Carrying three bars on each shoulder seemed better than the two they suggested. We finished earlier, had to do other work, but somehow it felt better. Thanks for another interesting story and a wake-up call to younger days. Thanks also for the explanations. I love mechanical things and I get the impression that these plants are one big mechanical adventure.
-
Power Plant Invocations and Imitations of Sonny Karcher
Originally Posted on June 16, 2012:
I have mentioned before that Sonny Karcher was one of the first Power Plant Men that taught me how to work my way up the ladder of Power Plant Ingenuity (In the post titled, In Memory of Sonny Karcher A True Power Plant Man). I used to come home from work after Steve Higginbotham dropped me off at the duplex where we were living at the time, and my family couldn’t wait to hear what Sonny Karcher had said or done that day.
Sonny Karcher
Soon after I had arrived at the plant one day, after coming back from the coal yard, Sonny had just dropped me off at the front of the Maintenance shop where I was going to the tool room to get some tools for something we were going to work on. Sonny was going to drive around behind the tool room in a yellow Cushman cart to pick up some larger equipment, and I was going to meet him there.
Like this only Yellow
As he was backing out of the shop he suddenly made a motion with his left hand. To me it looked like he was making the movement that someone would make if they were taking the lid off of a jar. I thought this meant that he wanted me to do something, but I couldn’t figure out what it was.
Various things went through my head, such as, I should get something to help remove lids from barrels. Or I needed to look inside of a jar to find one of the parts I was going to pick up. Nothing made much sense to me, so I waved for him to come back.
When he did, I asked him what he wanted me to do. He asked me what I meant. I told him that when he made that motion to open a jar, I couldn’t figure out what he wanted. So he told me. “I was just waving goodbye.”
He gave me a big smile and backed out of the shop again. Each time Sonny Karcher waved goodbye, he used a different motion with his hand. Sometimes he would look like he was twirling something on his finger. Sometimes it seemed like he was trying to get something sticky off of his fingers. Sometimes he just drew circles in the air with a couple of fingers. Other times he looked like he was giving an awkward kind of salute. Sonny made an art out of simple things like a wave goodbye.
That first summer it seemed like everyone was always munching on Sunflower seeds. There were bags of sunflower seeds everywhere you looked. Sonny already looked somewhat like a chipmunk with puffy round cheeks that formed from years of wearing a grin on his face. They were extra prominent when his cheeks were full of sunflower seeds. These were seeds still in their shells.
Power Plant Sunflower Seeds
So, it was normal to see someone take a step back while standing around talking, turn their head and drop a few sunflower seed shells from their mouth into the floor drains that were spaced evenly across the maintenance shop floor. There came a time when those drains had to be cleaned out because it seemed that every drain was packed solid full of sunflower seed shells.
Sunflowers weren’t the only items found in the drains, since chewing (or dipping) tobacco (such as Skoal) was used by a lot of the men in the Power Plant.
Just a pinch between your cheek and gums…. Never tried it myself.
Cleaning out a drain full of sunflower seeds, dipping tobacco and spit was a job that might cause a lot of people to gag, and I know I had to fight it back at the time. Most of the time I felt like I was having too much fun to get paid for working at the plant, but when it came time for cleaning out those drains, I felt like I was really working very hard for the $3.89 an hour that I was getting paid my first summer (1979) as a summer help.
But anyway, back to Sonny. I remember one evening when I came home after working with Sonny during the day, and we were sitting around the dinner table eating supper when my dad said something surprising. I don’t remember exactly what he said, but I remember what my response was. It came out before I thought what I was saying, and I said it with the same surprised smile Sonny would have. I replied, “Well S–t the bed!” With a heavy emphasis on each word.
That was a common phrase that Sonny used, and it was his response to anything surprising. Needless to say, I don’t normally use four letter words that have to be edited out of a post. It was just the matter of fact way that Sonny would use that phrase that made it seem all right to say at the time. If I remember correctly, both my mom and my dad stared at me for a second in disbelief, then broke out laughing as they had never heard that particular phrase. It was kind of like hearing “…Bless his heart” for the first time when used following an obvious insult.
In the year 1990 the Power Plant had a program that they called, “We’ve Got the Power”. I will talk more about this in a later post, so I will just say that it was a program where we broke up into teams and tried to find ways to save the company money. But long before “We’ve Got the Power”, there was Sonny Karcher. He was often trying to figure out how we could make electricity cheaper, or even come up with other ways of making a profit.
One day Sonny asked me this, “Kev, your smart because you learn things from all those books at school so tell me this… someone said the other day that diamonds are made out of coal. Is that true?” I told him it was. Then he said, “Well, what if we had one of those big dirt movers full of coal drive over some coal a bunch of times, would we be able to make diamonds?”
Dirt Mover full of coal
I told him that wouldn’t work because it takes a lot more pressure to make a diamond. So, he asked me if it would work if we put some coal on the railroad track and we let an entire train full of coal run over it. Would it make a diamond then? I assured him that even that wouldn’t make a diamond. He accepted it and just said, “Well, it’s too bad since we have that big pile of coal there, we ought to be able to come up with some way of making them into diamonds.
Another time when we were cleaning out the fish baskets at the intake (a job as smelly as it sounds) next to the 4 big intake pumps. These are the pumps that pump around 189,000 gallons of water per minute each. Sonny told me how big those pumps were and how much water they pumped. Then he said, “You know, that entire boiler is there just to make steam to turn the turbine to make electricity. It seems to me that we could just take these four pumps and have them pump water through the turbine and have it turn the turbines, then we wouldn’t need those big boilers. Why don’t we do something like that?” I assured Sonny that we would never be able to make enough electricity to make up for the electricity it took to turn the pumps that were pumping the water. He shook his head and said that it just seemed to him that those pumps could turn that turbine pretty fast.
One day I watched as Sonny watched another Power Plant man walk into the shop with a new type of lunch box. It was an Igloo Little Playmate. Sonny made a comment about how neat this guy’s new lunch box was. It was a new design at the time.
One exactly like this. These were a new kind of lunch box at the time.
Sonny immediately went out and bought one. The next week he came to work with his shiny new Little Playmate lunch box. I admit. I went and bought one myself a few weeks later. But this was the beginning of a trend that I noticed with Sonny. I began to notice that Sonny seemed to pick one item from each of the people he admired, and went and bought one for himself. Or he would pick up a phrase that someone else would say, and would start using that.
At first I thought it might just be a coincidence, so I started to test my hypothesis. When I would see something new that Sonny brought to work, I would look around to see who else had one of those, and sure enough. Someone close by would have one. Then I would hear Sonny talk a certain way. His accent would change and he would say something like he was imitating someone else, and usually I could tell right away who talked like that and knew that Sonny had borrowed that phrase from that person.
Some may think that this would be annoying, but I think with Sonny it was an act of endearment. It was his way of connecting with those people that he admired. Sonny had a small yellow orange Ford truck and I figured that someone else must have a truck like that, so I started looking all around for one like it. It took me a couple of weeks, but one morning while we were carpooling our way to the power plant, we came up behind the same kind of truck that Sonny had on its way to the plant. It was green instead of yellow, but it was undoubtedly the same model of truck. It was owned by Ken Reece, who was the manager over the tool room and warehouse.
Sonny imitated a voice that had me puzzled for a while. I had checked out all the Power Plant Men around trying to figure out who Sonny was imitating. Every once in a while Sonny would change his way of talking when he was making a point where he would let his lower lip come forward and work its way left and right as he talked, and he would close one eye more than the other and talk in a strange sort of a southern drawl. I just knew he was imitating someone because it was so different than just the regular Sonny.
Finally, one day when I was walking through the shop I heard someone in the welding area talking just like Sonny would talk when he used that voice. There was no mistake. That had to be the person. I could hear every inflection in his voice and it had to be the voice that Sonny was imitating because it had been much more honed and refined to give just the right effect. So, I changed the course I was travelling so that I could make my way around to the welders to see who it was that was talking like that.
There in the middle of the welding shop was a heavier set man standing in the middle of a group of welders telling a story. Everyone was listening to him quietly just as if it was story time at the library. So, I stopped and watched. This man wasn’t wearing an Electric Company hard hat. He was wearing a Brown and Root hard hat, which indicated that he worked for the construction company that was building the plant.
This guy was undoubtedly a master storyteller. When it came to the climactic part of the story, the bottom of his mouth would stick out with his lip moving left and right and left again, and one eye was partially closed to show the intensity of the situation and the drawl would intensify. Finally. I had found the man that Sonny Karcher had admired enough to take one of his favorite traits and connect it to himself. I could see why Sonny admired him so much. He had everyone within listening distance captivated by his story.
This Brown and Root hand soon became an employee of the Electric Company within a couple of weeks after I left at the end of the summer (on September 9, 1979). This heavier set person was still working at the plant when I first posted this story last year, but has since retired. He was one of this country’s leading Turbine mechanics and he can still tell a story like no one else. He is no longer as heavy. He is rather thin in comparison. He improved his health after realizing that if he really loved his family, he needed to take better care of himself.
I consider this True Power Plant Man, Ray Eberle, to be a dear friend of mine. I have never met anyone that looked more like my own grandfather than Ray. Not that he was that much older. No. He looked almost exactly like my grandfather looked when he was Ray’s age. There was no nicer man than my dad’s dad, and there is no nicer Power Plant Man than Ray Eberle.
Ray Eberle
Comments from the re-post:
-
The Janitors at Seminole showed me how the PPM (Power Plant Men) were spitting their tobacco juice inside I-beam webs, in tight corners, and other hard to clean spots. They asked me to put out a memo asking the spitters to just spit out in the middle of the floor so they could clean it up much easier, which I did. I can’t remember for sure, but it seems like the puddles of stinky gross slime around the Plant tailed off for a while.
Good story, Kevin. I hadn’t thought about Ray Eberle for a long time. He was a super turbine man I always enjoyed being around. I just remember his competence and his positive attitude.
-
It’s both amusing, and comforting to know the same things happen at power plants everywhere, we went through a “sunflower seed phase” which plugged the drains & the plant finally came up with a “NO MORE SUNFLOWER SEEDS” rule!
Power Plant Invocations and Imitations of Sonny Karcher
Originally Posted on June 16, 2012:
I have mentioned before that Sonny Karcher was one of the first Power Plant Men that taught me how to work my way up the ladder of Power Plant Ingenuity (In the post titled, In Memory of Sonny Karcher A True Power Plant Man). I used to come home from work after Steve Higginbotham dropped me off at the duplex where we were living at the time, and my family couldn’t wait to hear what Sonny Karcher had said or done that day.
Sonny Karcher
Soon after I had arrived at the plant one day, after coming back from the coal yard, Sonny had just dropped me off at the front of the Maintenance shop where I was going to the tool room to get some tools for something we were going to work on. Sonny was going to drive around behind the tool room in a yellow Cushman cart to pick up some larger equipment, and I was going to meet him there.
Like this only Yellow
As he was backing out of the shop he suddenly made a motion with his left hand. To me it looked like he was making the movement that someone would make if they were taking the lid off of a jar. I thought this meant that he wanted me to do something, but I couldn’t figure out what it was.
Various things went through my head, such as, I should get something to help remove lids from barrels. Or I needed to look inside of a jar to find one of the parts I was going to pick up. Nothing made much sense to me, so I waved for him to come back.
When he did, I asked him what he wanted me to do. He asked me what I meant. I told him that when he made that motion to open a jar, I couldn’t figure out what he wanted. So he told me. “I was just waving goodbye.”
He gave me a big smile and backed out of the shop again. Each time Sonny Karcher waved goodbye, he used a different motion with his hand. Sometimes he would look like he was twirling something on his finger. Sometimes it seemed like he was trying to get something sticky off of his fingers. Sometimes he just drew circles in the air with a couple of fingers. Other times he looked like he was giving an awkward kind of salute. Sonny made an art out of simple things like a wave goodbye.
That first summer it seemed like everyone was always munching on Sunflower seeds. There were bags of sunflower seeds everywhere you looked. Sonny already looked somewhat like a chipmunk with puffy round cheeks that formed from years of wearing a grin on his face. They were extra prominent when his cheeks were full of sunflower seeds. These were seeds still in their shells.
Power Plant Sunflower Seeds
So, it was normal to see someone take a step back while standing around talking, turn their head and drop a few sunflower seed shells from their mouth into the floor drains that were spaced evenly across the maintenance shop floor. There came a time when those drains had to be cleaned out because it seemed that every drain was packed solid full of sunflower seed shells.
Sunflowers weren’t the only items found in the drains, since chewing (or dipping) tobacco (such as Skoal) was used by a lot of the men in the Power Plant.
Just a pinch between your cheek and gums…. Never tried it myself.
Cleaning out a drain full of sunflower seeds, dipping tobacco and spit was a job that might cause a lot of people to gag, and I know I had to fight it back at the time. Most of the time I felt like I was having too much fun to get paid for working at the plant, but when it came time for cleaning out those drains, I felt like I was really working very hard for the $3.89 an hour that I was getting paid my first summer (1979) as a summer help.
But anyway, back to Sonny. I remember one evening when I came home after working with Sonny during the day, and we were sitting around the dinner table eating supper when my dad said something surprising. I don’t remember exactly what he said, but I remember what my response was. It came out before I thought what I was saying, and I said it with the same surprised smile Sonny would have. I replied, “Well S–t the bed!” With a heavy emphasis on each word.
That was a common phrase that Sonny used, and it was his response to anything surprising. Needless to say, I don’t normally use four letter words that have to be edited out of a post. It was just the matter of fact way that Sonny would use that phrase that made it seem all right to say at the time. If I remember correctly, both my mom and my dad stared at me for a second in disbelief, then broke out laughing as they had never heard that particular phrase. It was kind of like hearing “…Bless his heart” for the first time when used following an obvious insult.
In the year 1990 the Power Plant had a program that they called, “We’ve Got the Power”. I will talk more about this in a later post, so I will just say that it was a program where we broke up into teams and tried to find ways to save the company money. But long before “We’ve Got the Power”, there was Sonny Karcher. He was often trying to figure out how we could make electricity cheaper, or even come up with other ways of making a profit.
One day Sonny asked me this, “Kev, your smart because you learn things from all those books at school so tell me this… someone said the other day that diamonds are made out of coal. Is that true?” I told him it was. Then he said, “Well, what if we had one of those big dirt movers full of coal drive over some coal a bunch of times, would we be able to make diamonds?”
Dirt Mover full of coal
I told him that wouldn’t work because it takes a lot more pressure to make a diamond. So, he asked me if it would work if we put some coal on the railroad track and we let an entire train full of coal run over it. Would it make a diamond then? I assured him that even that wouldn’t make a diamond. He accepted it and just said, “Well, it’s too bad since we have that big pile of coal there, we ought to be able to come up with some way of making them into diamonds.
Another time when we were cleaning out the fish baskets at the intake (a job as smelly as it sounds) next to the 4 big intake pumps. These are the pumps that pump around 189,000 gallons of water per minute each. Sonny told me how big those pumps were and how much water they pumped. Then he said, “You know, that entire boiler is there just to make steam to turn the turbine to make electricity. It seems to me that we could just take these four pumps and have them pump water through the turbine and have it turn the turbines, then we wouldn’t need those big boilers. Why don’t we do something like that?” I assured Sonny that we would never be able to make enough electricity to make up for the electricity it took to turn the pumps that were pumping the water. He shook his head and said that it just seemed to him that those pumps could turn that turbine pretty fast.
One day I watched as Sonny watched another Power Plant man walk into the shop with a new type of lunch box. It was an Igloo Little Playmate.
One exactly like this. These were a new kind of lunch box at the time.
Sonny immediately went out and bought one. The next week he came to work with his shiny new Little Playmate lunch box. I admit. I went and bought one myself a few weeks later. But this was the beginning of a trend that I noticed with Sonny. I began to notice that Sonny seemed to pick one item from each of the people he admired, and went and bought one for himself. Or he would pick up a phrase that someone else would say, and would start using that.
At first I thought it might just be a coincidence, so I started to test my hypothesis. When I would see something new that Sonny brought to work, I would look around to see who else had one of those, and sure enough. Someone close by would have one. Then I would hear Sonny talk a certain way. His accent would change and he would say something like he was imitating someone else, and usually I could tell right away who talked like that and knew that Sonny had borrowed that phrase from that person.
Some may think that this would be annoying, but I think with Sonny it was an act of endearment. It was his way of connecting with those people that he admired. Sonny had a small yellow orange Ford truck and I figured that someone else must have a truck like that, so I started looking all around for one like it. It took me a couple of weeks, but one morning while we were carpooling our way to the power plant, we came up behind the same kind of truck that Sonny had on its way to the plant. It was green instead of yellow, but it was undoubtedly the same model of truck. It was owned by Ken Reece, who was the manager over the tool room and warehouse.
Sonny imitated a voice that had me puzzled for a while. I had checked out all the Power Plant Men around trying to figure out who Sonny was imitating. Every once in a while Sonny would change his way of talking when he was making a point where he would let his lower lip come forward and work its way left and right as he talked, and he would close one eye more than the other and talk in a strange sort of a southern drawl. I just knew he was imitating someone because it was so different than just the regular Sonny.
Finally, one day when I was walking through the shop I heard someone in the welding area talking just like Sonny would talk when he used that voice. There was no mistake. That had to be the person. I could hear every inflection in his voice and it had to be the voice that Sonny was imitating because it had been much more honed and refined to give just the right effect. So, I changed the course I was travelling so that I could make my way around to the welders to see who it was that was talking like that.
There in the middle of the welding shop was a heavier set man standing in the middle of a group of welders telling a story. Everyone was listening to him quietly just as if it was story time at the library. So, I stopped and watched. This man wasn’t wearing an Electric Company hard hat. He was wearing a Brown and Root hard hat, which indicated that he worked for the construction company that was building the plant.
This guy was undoubtedly a master storyteller. When it came to the climactic part of the story, the bottom of his mouth would stick out with his lip moving left and right and left again, and one eye was partially closed to show the intensity of the situation and the drawl would intensify. Finally. I had found the man that Sonny Karcher had admired enough to take one of his favorite traits and connect it to himself. I could see why Sonny admired him so much. He had everyone within listening distance captivated by his story.
This Brown and Root hand soon became an employee of the Electric Company within a couple of weeks after I left at the end of the summer (on September 9, 1979). This heavier set person was still working at the plant when I first posted this story last year, but has since retired. He was one of this country’s leading Turbine mechanics and he can still tell a story like no one else. He is no longer as heavy. He is rather thin in comparison. He improved his health after realizing that if he really loved his family, he needed to take better care of himself.
I consider this True Power Plant Man, Ray Eberle, to be a dear friend of mine. I have never met anyone that looked more like my own grandfather than Ray. Not that he was that much older. No. He looked almost exactly like my grandfather looked when he was Ray’s age. There was no nicer man than my dad’s dad, and there is no nicer Power Plant Man than Ray Eberle.
Ray Eberle
Comments from the re-post:
-
The Janitors at Seminole showed me how the PPM (Power Plant Men) were spitting their tobacco juice inside I-beam webs, in tight corners, and other hard to clean spots. They asked me to put out a memo asking the spitters to just spit out in the middle of the floor so they could clean it up much easier, which I did. I can’t remember for sure, but it seems like the puddles of stinky gross slime around the Plant tailed off for a while.
Good story, Kevin. I hadn’t thought about Ray Eberle for a long time. He was a super turbine man I always enjoyed being around. I just remember his competence and his positive attitude.
-
It’s both amusing, and comforting to know the same things happen at powerplants everywhere, we went through a “sunflower seed phase” which plugged the drains & the plant finally came up with a “NO MORE SUNFLOWER SEEDS” rule!
Spending Long Weekends with Power Plant Men Shoveling Coal
Originally posted on: June 1, 2012
The first couple of years while I worked as a summer help at the Coal-Fired Power Plant Coal Cleanup was performed on weekends by volunteer He-Men that wanted to make a few extra dollars. As a summer help, I needed all the extra money I could get. My wages during the first year (1979) were $3.89 an hour. This jumped to $5.84 an hour when I worked on the weekend, so you can imagine the thrill I had at receiving a paycheck that included the extra money made by doing “Coal Cleanup”. Another great advantage to doing coal cleanup on the weekends was that I was able to carpool with different people. So, during the first summer instead of just riding to work with Steve Higginbotham (See the post “Steve Higginbotham’s Junky Jalopy late for the Boiler Blowdown“), I caught a lot of rides with real Power Plant Men like Dale Hull, David Hankins, Jerry Mitchell, Preston Jenkins and Marlin McDaniel (Yeah. Marlin McDaniel as an A Foreman would volunteer for coal cleanup some times. Maybe it was when we were short a few people).
Coal Cleanup really became important during the second half of the first summer because Unit 1 was getting ready to go online. There was a major flaw in the Coal Conveyor logic when the conveyors first started conveying coal from the coal pile to the coal silos just above the bowl mills. What would happen was the same thing that happens if someone were to fall down at the top of a crowded escalator going up. Everyone behind that person would be shoved right on top of them if there wasn’t an emergency stop button to stop the escalator.
Escalator
All the conveyors had a safety cord alongside the entire length that could be pulled to stop the conveyor in an emergency, but this was something different.
To give you an idea… once the coal on the coal pile has been fed onto either Belts 4, 5, 6 or 7, from there the coal is dropped onto either belt 8 or 9. That carries the coal up to the coal Crusher which has a bin above the crusher that can be filled with coal. If the bin gets too full, then conveyor 8 and/or 9 would stop. When that happens, belts 4, 5, 6 or 7 should stop also…. only they didn’t. Belts 8 and 9 continued dumping coal into the crusher bin until it filled up and then coal fell out all over the top of the crusher tower around belts 8 and 9 until the coal tripped the belt by hitting the safety cord on the side of the belt. Belts 4, 5, 6 and 7 continued dumping coal onto belts 8 and 9, which caused the coal to backup and spill out all over the floor until the coal piled up high enough to trip the safety cord on the side of the belt.
In the picture of the power plant on the side of this post, there is one long conveyor that goes from the coalyard to the plant. It is about 1/2 mile long. This is where belts 10 and 11 carry the coal from the crusher, which crushes the coal down from big pieces the size of baseballs down to the size of walnuts.
The long belts 10 and 11 were like these only they are in a metal enclosure so the coal didn’t spill out on the ground.
At the top of the Transfer tower the coal from belts 10 and 11 are dumped onto belts 12 and 13 which carry the coal up to the Surge Bin Tower where the coal is dumped into the Surge bin. Now when the Surge Bin fills up, it stops belts 12 and/or 13 and it should also stop belts 10 and 11 and the feeders that feed the coal into the crusher at the bottom of the crusher bin… only they didn’t.
They continued dumping coal into the Surge bin, which filled up and spilled coal all over the surge bin until belts 12 and 13 tripped, at which point, coal began spilling out all over the transfer tower filling up both floors of the transfer tower with tons of coal. The same thing would happen at the bottom of Belt 10 and 11, where the crusher feeders kept feeding coal down to belts 10 and 11, which spilled out all over the bottom floor of the crusher tower.
I have worked in the transfer tower where the coal was higher than the windows and you had to bend over because your head would hit the ceiling on the floor at the foot of belt 12 and 13. It was almost dangerous enough to picture yourself sliding down the pile of coal and slipping right out one of the windows (which had been broken out by the pile of coal). To give you an idea of what this felt like, it was then a straight drop of 150 feet to the concrete below.
If that doesn’t seem like enough coal spills, then picture this… The coal from the Surge Bin tower fed onto belts 14, 15, 18 and 19 which in turn fed onto belts 16 and 17, 20 and 21. These last 4 belts were in what was called the “Tripper Gallery”. These 4 belts would dump coal into 12 coal silos (6 on each unit) that would feed the bowl mills. These are big silos about 5 stories tall.
The same thing would happen to these belts leaving piles of coal at the bottom of the surge bin in the surge bin tower and all along the tripper gallery because when the coal silos were full, the tripper was supposed to move to the next silo and dump coal until it was full, and keep moving until all the silos were full. Only, the tripper wasn’t working correctly, so it wouldn’t detect that the silo was full so the belt would keep dumping coal and would end up spilling coal all over the entire tripper gallery which runs about 100 feet or so.
So, our first experience with doing coal cleanup was like being on a chain gang where we shoveled coal from morning until night trying to clean up these 15 or so major coal spills by shoveling the coal back onto the conveyor while it was running. In some cases, we had to shovel the coal away from the belt before the belt could even run (as was the case with belts 12 and 13). So, you can imagine how shoveling coal one scoop at a time made it seem like you were not getting anywhere fast. 3 or 4 men could all be shoveling on one pile of coal for 30 minutes and not even make a noticeable dent in the pile. That is why when I went to the tool room to choose a shovel, instead of picking a regular shovel, I picked a large scoop shovel used to scoop grain.
Scoop Shovel
Regular Shovel
Even though each scoop of coal was heavier, it seemed more satisfying to see the bigger dent in the pile of coal with each shovelful. I remember one day after we had shoveled coal all day from morning until late at night only to come back into work the next morning to the new piles of coal just as big as the ones we had shoveled the day before.
After 2 years of volunteer coal cleanup which was becoming less volunteer and more rotational since the list of volunteers was growing smaller, Ray Butler pointed out that it didn’t make much sense to pay a first class machinist overtime to shovel coal when you could create a labor crew and pay them bottom dollar to do coal cleanup all the time, as well as other dirty jobs that no one really wanted to do (such as suck out sewage pits and other sump pits around the plant).
That was when the Labor crew was formed. While I was in my 3rd year as a summer help (1981). Bill Cook was a summer help then that stayed on as a labor crew hand at the end of the summer. By the 4th summer as summer help, the only time we did coal cleanup was when there was a major spill, which was only a couple of times all summer.
I will write later about coal cleanup with Dale Hull. I also remember doing coal-cleanup with Preston Jenkins one weekend. I hadn’t carpooled with him to work, but I caught a ride back to Stillwater with him because my ride left at the end of a full day, and I decided to stay behind to add a few extra dollars to my bank account. We left a couple of hours later around seven o’clock.
I climbed into the back of Preston’s Camaro. I apologized for being so dirty, as I was covered from head-to-toe in coal-dust and my clothes were soaked with coal-dust permeated sweat. Preston said that he didn’t mind. I soon found out why.
When I climbed into the backseat of his car, I noticed that the upholstery that covered the seat back of the back seat was stained with some blackish-brownish um…. something. Anyway. I decided to sit on the passenger side of the back seat instead of behind the driver side because that side wasn’t nearly as stained. As we drove down the highway toward home, I quickly learned why the seat back was so stained.
Being the “good-ol’ boy” that Preston was, when he climbed into the car, he took out his can of Skoal and put a pinch between his cheek and gums:
Just a pinch between your cheek and gums…. Never tried it myself.
As we flew down the highway like a Texan heading for Stillwater, Preston would lean his head out the window and squirt out a wad of spit. It would dance in the air like a little fairy just before it would be sucked into the back window of his car and splat against the seat back of the back seat. Yep that explained it all right. I always wondered if he knew, never having to sit in the back seat of his own car.
During the first summer when I was able to catch a ride with David Hankins a couple of times. He was the crane operator at the time and drove a black Trans Am. He was a black man with a very broad chest that never seemed to tire while doing coal cleanup. From the first day he always treated me with great respect which in turn gave me a great respect for him. I had him classified as a true Power Plant Man.
The second summer when I had been back at the plant for a couple of weeks, one day when Jim Heflin and I were going somewhere in a yellow Cushman cart, I asked Jim why I hadn’t seen David Hankins around.
A Cushman Cart Like this only Yellow
Jim (who hadn’t been at the plant the first summer) stopped the cart in the middle of the road and looked at me very solemnly and told me that David Hankins had died in a car accident in the spring. He had been going home from a Men’s Club event when he was killed. Because of this, alcoholic beverages were no longer allowed at Men’s Club events. As with all the people I have worked with at the power plant, I keep David Hankins in my memory and I often think about him to this day. David Hankins was a True Power Plant Man.
Comments from the original Post:
-
neenergyobserver June 1, 2012 as 6:28 pm
We’ve lost so many friends over the years, in the plants and on the line, especially when they were relaxing on their way home. You, and David’s family have my 9very belated) condolences.
Somebody, somewhere, needs to teach engineers a course on Conveyor Logic 101, I’ve seen the same thing happen in nearly every plant (from automotive, rarely, to meat packing, often) I’ve been in. Or they could, just for once in their life, shut their pie-hole and listen to people like you and me.
-
Plant Electrician June 1, 2012 at 11:39 pm
Thanks Nebraska.
We were often exhausted while driving home from work when we had been working a lot of overtime. It was a wonder sometimes that we were able to keep the car on the road.
My uncle Bill Breazile worked for the Utility company in Nebraska City where someone closed a breaker while he was working on a line. He was in the hospital for about 6 months healing from his burns. This was about 30 years ago. He has since passed away. It takes a special person to be a lineman. Putting their life on the line every time they reach out to do their job.
-
neenergyobserver June 2, 2012 at 10:42 am
Not that different from you. It’s all about planning your work, and doing it right, and safely. You and I know that 480 will kill you just as quick as 7200 if you get careless. That’s why almost all (old) linemen and electricians are in some sense stolid and unexcitable.
-
-
-
jackcurtis July 14, 2012 at 12:59 pm
Industrial America returns in stories and comments in places like this, from the only place it still exists: the minds of those who were part of it. Industrial America was a giant; those who manned it were giant tamers and it seems to me, very much the special breed illuminated in these posts…
Comment from last repost:
-
I remember a time when I would have chose the bigger shovel, perhaps in the early 70’s. I was moving steel in a manufacturing plant. Carrying three bars on each shoulder seemed better than the two they suggested. We finished earlier, had to do other work, but somehow it felt better. Thanks for another interesting story and a wake-up call to younger days. Thanks also for the explanations. I love mechanical things and I get the impression that these plants are one big mechanical adventure.
-
Power Plant Invocations and Imitations of Sonny Karcher — Repost
Originally Posted on June 16, 2012:
I have mentioned before that Sonny Karcher was one of the first Power Plant Men that taught me how to work my way up the ladder of Power Plant Ingenuity (In the post titled, In Memory of Sonny Karcher A True Power Plant Man). I used to come home from work after Steve Higginbotham dropped me off at the duplex where we were living at the time, and my family couldn’t wait to hear what Sonny Karcher had said or done that day.
Soon after I had arrived at the plant Sonny had just dropped me off at the front of the Maintenance shop where I was going to the tool room to get some tools for something we were going to work on. Sonny was going to drive around behind the tool room in a yellow Cushman cart to pick up some larger equipment, and I was going to meet him there. As he was backing out of the shop he suddenly made a motion with his left hand. To me it looked like he was making the movement that someone would make if they were taking the lid off of a jar. I thought this meant that he wanted me to do something, but I couldn’t figure out what it was.
Various things went through my head, such as, I should get something to help remove lids from barrels. Or I needed to look inside of a jar to find one of the parts I was going to pick up. Nothing made much sense to me, so I waved for him to come back. When he did, I asked him what he wanted me to do. He asked me what I meant. I told him that when he made that motion to open a jar, I couldn’t figure out what he wanted. So he told me. “I was just waving goodbye.” He gave me a big smile and backed out of the shop again. Each time Sonny Karcher waved goodbye, he used a different motion with his hand. Sometimes he would look like he was twirling something on his finger. Sometimes it seemed like he was trying to get something sticky off of his fingers. Sometimes he just drew circles in the air with a couple of fingers. Other times he looked like he was giving an awkward kind of salute. Sonny made an art out of simple things like a wave goodbye.
That first summer it seemed like everyone was always munching on Sunflower seeds. There were bags of sunflower seeds everywhere you looked. Sonny already looked somewhat like a chipmunk with puffy round cheeks that formed from years of wearing a grin on his face. They were extra prominent when his cheeks were full of sunflower seeds. These were seeds still in their shells.
Power Plant Sunflower Seeds
So, it was normal to see someone take a step back while standing around talking, turn their head and drop a few sunflower seed shells from their mouth into the floor drains that were spaced evenly across the maintenance shop floor. There came a time when those drains had to be cleaned out because it seemed that every drain was packed solid full of sunflower seed shells.
Sunflowers weren’t the only items found in the drains, since chewing (or dipping) tobacco (such as Skoal) was used by a lot of the men in the Power Plant.
Just a pinch between your cheek and gums…. Never tried it myself.
Cleaning out a drain full of sunflower seeds, dipping tobacco and spit was a job that might cause a lot of people to gag, and I know I had to fight it back at the time. Most of the time I felt like I was having too much fun to get paid for working at the plant, but when it came time for cleaning out those drains, I felt like I was really working very hard for the $3.89 an hour that I was getting paid my first summer (1979) as a summer help.
But anyway, back to Sonny. I remember one evening when I came home after working with Sonny during the day, and we were sitting around the dinner table eating supper when my dad said something surprising. I don’t remember exactly what he said, but I remember what my response was. It came out before I thought what I was saying, and I said it with the same surprised smile Sonny would have. I replied, “Well S–t the bed!” With a heavy emphasis on each word. That was a common phrase that Sonny used, and it was his response to anything surprising. Needless to say, I don’t normally use four letter words that have to be edited out of a post. It was just the matter of fact way that Sonny would use that phrase that made it seem all right to say at the time. If I remember correctly, both my mom and my dad stared at me for a second in disbelief, then broke out laughing as they had never heard that particular phrase. It was kind of like hearing “…Bless his heart” for the first time used following an obvious insult.
In the year 1990 the Power Plant had a program that they called, “We’ve Got the Power”. I will talk more about this in a later post, so I will just say that it was a program where we broke up into teams and tried to find ways to save the company money. But long before “We’ve Got the Power”, there was Sonny Karcher. He was often trying to figure out how we could make electricity cheaper, or even come up with other ways of making a profit.
One day Sonny asked me this, “Kev, your smart because you learn things from all those books at school so tell me this… someone said the other day that diamonds are made out of coal. Is that true?” I told him it was. Then he said, “Well, what if we had one of those big dirt movers full of coal drive over some coal a bunch of times, would we be able to make diamonds?”
Dirt Mover full of coal
I told him that wouldn’t work because it takes a lot more pressure to make a diamond. So, he asked me if it would work if we put some coal on the railroad track and we let an entire train full of coal run over it. Would it make a diamond then? I assured him that even that wouldn’t make a diamond. He accepted it and just said, “Well, it’s too bad since we have that big pile of coal there, we ought to be able to come up with some way of making them into diamonds.
Another time when we were cleaning out the fish baskets at the intake (a job as smelly as it sounds) next to the 4 big intake pumps. These are the pumps that pump around 189,000 gallons of water per minute each. Sonny told me how big those pumps were and how much water they pumped. Then he said, “You know, that entire boiler is there just to make steam to turn the turbine to make electricity. It seems to me that we could just take these four pumps and have them pump water through the turbine and have it turn the turbines, then we wouldn’t need those big boilers. Why don’t we do something like that?” I assured Sonny that we would never be able to make enough electricity to make up for the electricity it took to turn the pumps that were pumping the water. He shook his head and said that it just seemed to him that those pumps could turn that turbine pretty fast.
One day I watched as Sonny watched another Power Plant man walk into the shop with a new type of lunch box. It was an Igloo Little Playmate.
One exactly like this. These were a new kind of lunch box at the time.
Sonny immediately went out and bought one. The next week he came to work with his shiny new Little Playmate lunch box. I admit. I went and bought one myself a few weeks later. But this was the beginning of a trend that I noticed with Sonny. I began to notice that Sonny seemed to pick one item from each of the people he admired, and went and bought one for himself. Or he would pick up a phrase that someone else would say, and would start using that. At first I thought it might just be a coincidence, so I started to test my hypothesis. When I would see something new that Sonny brought to work, I would look around to see who else had one of those, and sure enough. Someone close by would have one. Then I would hear Sonny talk a certain way. His accent would change and he would say something like he was imitating someone else, and usually I could tell right away who talked like that and knew that Sonny had borrowed that phrase from that person.
Some may think that this would be annoying, but I think with Sonny it was an act of endearment. It was his way of connecting with those people that he admired. Sonny had a small yellow orange Ford truck and I figured that someone else must have a truck like that, so I started looking all around for one like it. It took me a couple of weeks, but one morning while we were carpooling are way to the power plant, we came up behind the same kind of truck that Sonny had on its way to the plant. It was green instead of yellow, but it was undoubtedly the same model of truck. It was owned by Ken Reece, who was the manager over the tool room and warehouse.
Sonny imitated a voice that had me puzzled for a while. I had checked out all the Power Plant Men around trying to figure out who Sonny was imitating. Every once in a while Sonny would change his way of talking when he was making a point where he would let his lower lip come forward and work its way left and right as he talked, and he would close one eye more than another and talk in a strange sort of a southern drawl. I just knew he was imitating someone because it was so different than just the regular Sonny.
Finally, one day when I was walking through the shop I heard someone in the welding area talking just like Sonny would talk when he used that voice. There was no mistake. That had to be the person. I could hear every inflection in his voice and it had to be the voice that Sonny was imitating because it had been much more honed and refined to give just the right effect. So, I changed the course I was travelling so that I could make my way around to the welders to see who it was that was talking like that.
There in the middle of the welding shop was a heavier set man standing in the middle of a group of welders telling a story. Everyone was listening to him quietly just as if it was story time at the library. So, I stopped and watched. This man wasn’t wearing an Electric Company hard hat. He was wearing a Brown and Root hard hat, which indicated that he worked for the construction company that was building the plant. This guy was undoubtedly a master storyteller. When it came to the climactic part of the story, the bottom of his mouth would stick out with his lip moving left and right and left again, and one eye was partially closed to show the intensity of the situation and the drawl would intensify. Finally. I had found the man that Sonny Karcher had admired enough to take one of his favorite traits and connect it to himself. I could see why Sonny admired him so much. He had everyone within listening distance captivated by his story.
This Brown and Root hand soon became an employee of the Electric Company within a couple of weeks after I left at the end of the summer (on September 9, 1979). This heavier set person was still working at the plant when I first posted this story last year, but has since retired. He was one of this country’s leading Turbine mechanics and he can still tell a story like no one else. He is no longer as heavy. He is rather thin in comparison. He improved his health after realizing that if he really loved his family, he needed to take better care of himself. I consider this True Power Plant Man, Ray Eberle, to be a dear friend of mine. I have never met anyone that looked more like my own grandfather than Ray. Not that he was that much older. No. He looked almost exactly like my grandfather looked when he was Ray’s age. There was no nicer man than my dad’s dad, and there is no nicer Power Plant Man than Ray Eberle.
Comments from the re-post:
-
The Janitors at Seminole showed me how the PPM (Power Plant Men) were spitting their tobacco juice inside I-beam webs, in tight corners, and other hard to clean spots. They asked me to put out a memo asking the spitters to just spit out in the middle of the floor so they could clean it up much easier, which I did. I can’t remember for sure, but it seems like the puddles of stinky gross slime around the Plant tailed off for a while.
Good story, Kevin. I hadn’t thought about Ray Eberle for a long time. He was a super turbine man I always enjoyed being around. I just remember his competence and his positive attitude.
-
It’s both amusing, and comforting to know the same things happen at powerplants everywhere, we went through a “sunflower seed phase” which plugged the drains & the plant finally came up with a “NO MORE SUNFLOWER SEEDS” rule!
Spending Long Weekends with Power Plant Men Shoveling Coal — Repost
Originally posted on: June 1, 2012
The first couple of years while I worked as a summer help at the Coal-Fired Power Plant Coal Cleanup was performed on weekends by volunteer He-Men that wanted to make a few extra dollars. As a summer help, I needed all the extra money I could get. My wages during the first year (1979) were $3.89 an hour. This jumped to $5.84 an hour when I worked on the weekend, so you can imagine the thrill I had at receiving a paycheck that included the extra money made by doing “Coal Cleanup”. Another great advantage to doing coal cleanup on the weekends was that I was able to carpool with different people. So, during the first summer instead of just riding to work with Steve Higginbotham, I caught a lot of rides with real Power Plant Men like Dale Hull, David Hankins, Jerry Mitchell, Preston Jenkins and Marlin McDaniel (Yeah. Marlin McDaniel as an A Foreman would volunteer for coal cleanup some times. Maybe it was when we were short a few people).
Coal Cleanup really became important during the second half of the first summer because Unit 1 was getting ready to go online. There was a major flaw in the Coal Conveyor logic when the conveyors first started conveying coal from the coal pile to the coal silos just above the bowl mills. What would happen was the same thing that happens if someone were to fall down at the top of a crowded escalator going up. Everyone behind that person would be shoved right on top of them if there wasn’t an emergency stop button to stop the escalator.
Escalator
All the conveyors had a safety cord alongside the entire length that could be pulled to stop the conveyor in an emergency, but this was something different.
To give you an idea… once the coal on the coal pile has been fed onto either Belts 4, 5, 6 or 7, from there the coal is dropped onto either belt 8 or 9. That carries the coal up to the coal Crusher which has a bin above the crusher that can be filled with coal. If the bin gets too full, then conveyor 8 and/or 9 would stop. When that happens, belts 4, 5, 6 or 7 should stop also…. only they didn’t. Belts 8 and 9 continued dumping coal into the crusher bin until it filled up and then coal fell out all over the top of the crusher tower around belts 8 and 9 until the coal tripped the belt by hitting the safety cord on the side of the belt. Belts 4, 5, 6 and 7 continued dumping coal onto belts 8 and 9, which caused the coal to backup and spill out all over the floor until the coal piled up high enough to trip the safety cord on the side of the belt.
In the picture of the power plant on the side of this post, there is one long conveyor that goes from the coalyard to the plant. It is about 1/2 mile long. This is where belts 10 and 11 carry the coal from the crusher, which crushes the coal down from big pieces the size of baseballs down to the size of walnuts.
The long belts 10 and 11 were like these only they are in a metal enclosure so the coal didn’t spill out on the ground.
At the top of the Transfer tower the coal from belts 10 and 11 are dumped onto belts 12 and 13 which carry the coal up to the Surge Bin Tower where the coal is dumped into the Surge bin. Now when the Surge Bin fills up, it stops belts 12 and/or 13 and it should also stop belts 10 and 11 and the feeders that feed the coal into the crusher at the bottom of the crusher bin… only they didn’t. They continued dumping coal into the Surge bin, which filled up and spilled coal all over the surge bin until belts 12 and 13 tripped, at which point, coal began spilling out all over the transfer tower filling up both floors of the transfer tower with tons of coal. The same thing would happen at the bottom of Belt 10 and 11, where the crusher feeders kept feeding coal down to belts 10 and 11, which spilled out all over the bottom floor of the crusher tower. I have worked in the transfer tower where the coal was higher than the windows and you had to bend over because your head would hit the ceiling on the floor at the foot of belt 12 and 13. It was almost dangerous enough to picture yourself sliding down the pile of coal and slipping right out one of the windows (which had been broken out by the pile of coal). To give you an idea of what this felt like, it was then a straight drop of 150 feet to the concrete below.
If that doesn’t seem like enough coal spills, then picture this… The coal from the Surge Bin tower fed onto belts 14, 15, 18 and 19 which in turn fed onto belts 16 and 17, 20 and 21. These last 4 belts were in what was called the “Tripper Gallery”. These 4 belts would dump coal into 12 coal silos (6 on each unit) that would feed the bowl mills. These are big silos about 5 stories tall. The same thing would happen to these belts leaving piles of coal at the bottom of the surge bin in the surge bin tower and all along the tripper gallery because when the coal silos were full, the tripper was supposed to move to the next silo and dump coal until it was full, and keep moving until all the silos were full. Only, the tripper wasn’t working correctly, so it wouldn’t detect that the silo was full so the belt would keep dumping coal and would end up spilling coal all over the entire tripper gallery which runs about 100 feet or so.
So, our first experience with doing coal cleanup was like being on a chain gang where we shoveled coal from morning until night trying to clean up these 15 or so major coal spills by shoveling the coal back onto the conveyor while it was running. In some cases, we had to shovel the coal away from the belt before the belt could even run (as was the case with belts 12 and 13). So, you can imagine how shoveling coal one scoop at a time made it seem like you were not getting anywhere fast. 3 or 4 men could all be shoveling on one pile of coal for 30 minutes and not even make a noticeable dent in the pile. That is why when I went to the tool room to choose a shovel, instead of picking a regular shovel, I picked a large scoop shovel used to scoop grain.
Scoop Shovel
Regular Shovel
Even though each scoop of coal was heavier, it seemed more satisfying to see the bigger dent in the pile of coal with each shovelful. I remember one day after we had shoveled coal all day from morning until late at night only to come back into work the next morning to the new piles of coal just as big as the ones we had shoveled the day before.
After 2 years of volunteer coal cleanup which was becoming less volunteer and more rotational since the list of volunteers was growing smaller, Ray Butler pointed out that it didn’t make much sense to pay a first class machinist overtime to shovel coal when you could create a labor crew and pay them bottom dollar to do coal cleanup all the time, as well as other dirty jobs that no one really wanted to do (such as suck out sewage pits and other sump pits around the plant). That was when the Labor crew was formed. While I was in my 3rd year as a summer help (1981). Bill Cook was a summer help then that stayed on as a labor crew hand at the end of the summer. By the 4th summer as summer help, the only time we did coal cleanup was when there was a major spill, which was only a couple of times all summer.
I will write later about coal cleanup with Dale Hull. I also remember doing coal-cleanup with Preston Jenkins one weekend. I hadn’t carpooled with him to work, but I caught a ride back to Stillwater with him because my ride left at the end of a full day, and I decided to stay behind to add a few extra dollars to my bank account. We left a couple of hours later around seven o’clock.
I climbed into the back of Preston’s Camaro. I apologized for being so dirty, as I was covered from head-to-toe in coal-dust and my clothes were soaked with coal-dust permeated sweat. Preston said that he didn’t mind. I soon found out why.
When I climbed into the backseat of his car, I noticed that the upholstery that covered the seat back of the back seat was stained with some blackish-brownish um…. something. Anyway. I decided to sit on the passenger side of the back seat instead of behind the driver side because that side wasn’t near as stained. As we drove down the highway toward home, I quickly learned why the seat back was so stained.
Being the “good-ol’ boy” that Preston was, when he climbed into the car, he took out his can of Skoal and put a pinch between his cheek and gums:
Just a pinch between your cheek and gums…. Never tried it myself.
As we flew down the highway like a Texan heading for Stillwater, Preston would lean his head out the window and squirt out a wad of spit. It would dance in the air like a little fairy just before it would be sucked into the back window of his car and splat against the seat back of the back seat. Yep that explained it all right. I always wondered if he knew, never having to sit in the back seat of his own car.
It was during the first summer when I was able to catch a ride with David Hankins a couple of times. He was the crane operator at the time and drove a black Trans Am. He was a black man with a very broad chest that never seemed to tire while doing coal cleanup. From the first day he always treated me with great respect which in turn gave me a great respect for him. I had him classified as a true Power Plant Man.
The second summer when I had been back at the plant for a couple of weeks, one day when Jim Heflin and I were going somewhere in a yellow Cushman cart, I asked Jim why I hadn’t seen David Hankins around.
A Cushman Cart Like this only Yellow
Jim (who hadn’t been at the plant the first summer) stopped the cart in the middle of the road and looked at me very solemnly and told me that David Hankins had died in a car accident in the spring. He had been going home from a Men’s Club event when he was killed. Because of this, alcoholic beverages were no longer allowed at Men’s Club events. As with all the people I have worked with at the power plant, I keep David Hankins in my memory and I often think about him to this day. David Hankins was a True Power Plant Man.
Comments from the original Post:
-
neenergyobserver June 1, 2012 as 6:28 pm
We’ve lost so many friends over the years, in the plants and on the line, especially when they were relaxing on their way home. You, and David’s family have my 9very belated) condolences.
Somebody, somewhere, needs to teach engineers a course on Conveyor Logic 101, I’ve seen the same thing happen in nearly every plant (from automotive, rarely, to meat packing, often) I’ve been in. Or they could, just for once in their life, shut their pie-hole and listen to people like you and me.
-
Plant Electrician June 1, 2012 at 11:39 pm
Thanks Nebraska.
We were often exhausted while driving home from work when we had been working a lot of overtime. It was a wonder sometimes that we were able to keep the car on the road.
My uncle Bill Breazile worked for the Utility company in Nebraska City where someone closed a breaker while he was working on a line. He was in the hospital for about 6 months healing from his burns. This was about 30 years ago. He has since passed away. It takes a special person to be a lineman. Putting their life on the line every time they reach out to do their job.
-
neenergyobserver June 2, 2012 at 10:42 am
Not that different from you. It’s all about planning your work, and doing it right, and safely. You and I know that 480 will kill you just as quick as 7200 if you get careless. That’s why almost all (old) linemen and electricians are in some sense stolid and unexcitable.
-
-
-
jackcurtis July 14, 2012 at 12:59 pm
Industrial America returns in stories and comments in places like this, from the only place it still exists: the minds of those who were part of it. Industrial America was a giant; those who manned it were giant tamers and it seems to me, very much the special breed illuminated in these posts…
Power Plant Invocations and Imitations of Sonny Karcher — Repost
Originally Posted on June 16, 2012:
I have mentioned before that Sonny Karcher was one of the first Power Plant Men that taught me how to work my way up the ladder of Power Plant Ingenuity (In the post titled, In Memory of Sonny Karcher A True Power Plant Man). I used to come home from work after Steve Higginbotham dropped me off at the duplex where we were living at the time, and my family couldn’t wait to hear what Sonny Karcher had said or done that day.
Soon after I had arrived at the plant Sonny had just dropped me off at the front of the Maintenance shop where I was going to the tool room to get some tools for something we were going to work on. Sonny was going to drive around behind the tool room in a yellow Cushman cart to pick up some larger equipment, and I was going to meet him there. As he was backing out of the shop he suddenly made a motion with his left hand. To me it looked like he was making the movement that someone would make if they were taking the lid off of a jar. I thought this meant that he wanted me to do something, but I couldn’t figure out what it was.
Various things went through my head, such as, I should get something to help remove lids from barrels. Or I needed to look inside of a jar to find one of the parts I was going to pick up. Nothing made much sense to me, so I waved for him to come back. When he did, I asked him what he wanted me to do. He asked me what I meant. I told him that when he made that motion to open a jar, I couldn’t figure out what he wanted. So he told me. “I was just waving goodbye.” He gave me a big smile and backed out of the shop again. Each time Sonny Karcher waved goodbye, he used a different motion with his hand. Sometimes he would look like he was twirling something on his finger. Sometimes it seemed like he was trying to get something sticky off of his fingers. Sometimes he just drew circles in the air with a couple of fingers. Other times he looked like he was giving an awkward kind of salute. Sonny made an art out of simple things like a wave goodbye.
That first summer it seemed like everyone was always munching on Sunflower seeds. There were bags of sunflower seeds everywhere you looked. Sonny already looked somewhat like a chipmunk with puffy round cheeks that formed from years of wearing a grin on his face. They were extra prominent when his cheeks were full of sunflower seeds. These were seeds still in their shells.
Power Plant Sunflower Seeds
So, it was normal to see someone take a step back while standing around talking, turn their head and drop a few sunflower seed shells from their mouth into the floor drains that were spaced evenly across the maintenance shop floor. There came a time when those drains had to be cleaned out because it seemed that every drain was packed solid full of sunflower seed shells.
Sunflowers weren’t the only items found in the drains, since chewing (or dipping) tobacco (such as Skoal) was used by a lot of the men in the Power Plant.
Just a pinch between your cheek and gums…. Never tried it myself.
Cleaning out a drain full of sunflower seeds, dipping tobacco and spit was a job that might cause a lot of people to gag, and I know I had to fight it back at the time. Most of the time I felt like I was having too much fun to get paid for working at the plant, but when it came time for cleaning out those drains, I felt like I was really working very hard for the $3.89 an hour that I was getting paid my first summer (1979) as a summer help.
But anyway, back to Sonny. I remember one evening when I came home after working with Sonny during the day, and we were sitting around the dinner table eating supper when my dad said something surprising. I don’t remember exactly what he said, but I remember what my response was. It came out before I thought what I was saying, and I said it with the same surprised smile Sonny would have. I replied, “Well S–t the bed!” With a heavy emphasis on each word. That was a common phrase that Sonny used, and it was his response to anything surprising. Needless to say, I don’t normally use four letter words that have to be edited out of a post. It was just the matter of fact way that Sonny would use that phrase that made it seem all right to say at the time. If I remember correctly, both my mom and my dad stared at me for a second in disbelief, then broke out laughing as they had never heard that particular phrase. It was kind of like hearing “…Bless his heart” for the first time used following an obvious insult.
In the year 1990 the Power Plant had a program that they called, “We’ve Got the Power”. I will talk more about this in a later post, so I will just say that it was a program where we broke up into teams and tried to find ways to save the company money. But long before “We’ve Got the Power”, there was Sonny Karcher. He was often trying to figure out how we could make electricity cheaper, or even come up with other ways of making a profit.
One day Sonny asked me this, “Kev, your smart because you learn things from all those books at school so tell me this… someone said the other day that diamonds are made out of coal. Is that true?” I told him it was. Then he said, “Well, what if we had one of those big dirt movers full of coal drive over some coal a bunch of times, would we be able to make diamonds?”
Dirt Mover full of coal
I told him that wouldn’t work because it takes a lot more pressure to make a diamond. So, he asked me if it would work if we put some coal on the railroad track and we let an entire train full of coal run over it. Would it make a diamond then? I assured him that even that wouldn’t make a diamond. He accepted it and just said, “Well, it’s too bad since we have that big pile of coal there, we ought to be able to come up with some way of making them into diamonds.
Another time when we were cleaning out the fish baskets at the intake (a job as smelly as it sounds) next to the 4 big intake pumps. These are the pumps that pump around 189,000 gallons of water per minute each. Sonny told me how big those pumps were and how much water they pumped. Then he said, “You know, that entire boiler is there just to make steam to turn the turbine to make electricity. It seems to me that we could just take these four pumps and have them pump water through the turbine and have it turn the turbines, then we wouldn’t need those big boilers. Why don’t we do something like that?” I assured Sonny that we would never be able to make enough electricity to make up for the electricity it took to turn the pumps that were pumping the water. He shook his head and said that it just seemed to him that those pumps could turn that turbine pretty fast.
One day I watched as Sonny watched another Power Plant man walk into the shop with a new type of lunch box. It was an Igloo Little Playmate.
One exactly like this. These were a new kind of lunch box at the time.
Sonny immediately went out and bought one. The next week he came to work with his shiny new Little Playmate lunch box. I admit. I went and bought one myself a few weeks later. But this was the beginning of a trend that I noticed with Sonny. I began to notice that Sonny seemed to pick one item from each of the people he admired, and went and bought one for himself. Or he would pick up a phrase that someone else would say, and would start using that. At first I thought it might just be a coincidence, so I started to test my hypothesis. When I would see something new that Sonny brought to work, I would look around to see who else had one of those, and sure enough. Someone close by would have one. Then I would hear Sonny talk a certain way. His accent would change and he would say something like he was imitating someone else, and usually I could tell right away who talked like that and knew that Sonny had borrowed that phrase from that person.
Some may think that this would be annoying, but I think with Sonny it was an act of endearment. It was his way of connecting with those people that he admired. Sonny had a small yellow orange Ford truck and I figured that someone else must have a truck like that, so I started looking all around for one like it. It took me a couple of weeks, but one morning while we were carpooling are way to the power plant, we came up behind the same kind of truck that Sonny had on its way to the plant. It was green instead of yellow, but it was undoubtedly the same model of truck. It was owned by Ken Reece, who was the manager over the tool room and warehouse.
Sonny imitated a voice that had me puzzled for a while. I had checked out all the Power Plant Men around trying to figure out who Sonny was imitating. Every once in a while Sonny would change his way of talking when he was making a point where he would let his lower lip come forward and work its way left and right as he talked, and he would close one eye more than another and talk in a strange sort of a southern drawl. I just knew he was imitating someone because it was so different than just the regular Sonny.
Finally, one day when I was walking through the shop I heard someone in the welding area talking just like Sonny would talk when he used that voice. There was no mistake. That had to be the person. I could hear every inflection in his voice and it had to be the voice that Sonny was imitating because it had been much more honed and refined to give just the right effect. So, I changed the course I was travelling so that I could make my way around to the welders to see who it was that was talking like that.
There in the middle of the welding shop was a heavier set man standing in the middle of a group of welders telling a story. Everyone was listening to him quietly just as if it was story time at the library. So, I stopped and watched. This man wasn’t wearing an Electric Company hard hat. He was wearing a Brown and Root hard hat, which indicated that he worked for the construction company that was building the plant. This guy was undoubtedly a master storyteller. When it came to the climactic part of the story, the bottom of his mouth would stick out with his lip moving left and right and left again, and one eye was partially closed to show the intensity of the situation and the drawl would intensify. Finally. I had found the man that Sonny Karcher had admired enough to take one of his favorite traits and connect it to himself. I could see why Sonny admired him so much. He had everyone within listening distance captivated by his story.
This Brown and Root hand soon became an employee of the Electric Company within a couple of weeks after I left at the end of the summer (on September 9, 1979). This heavier set person was still working at the plant when I first posted this story last year, but has since retired. He was one of this country’s leading Turbine mechanics and he can still tell a story like no one else. He is no longer as heavy. He is rather thin in comparison. He improved his health after realizing that if he really loved his family, he needed to take better care of himself. I consider this True Power Plant Man, Ray Eberle, to be a dear friend of mine. I have never met anyone that looked more like my own grandfather than Ray. Not that he was that much older. No. He looked almost exactly like my grandfather looked when he was Ray’s age. There was no nicer man than my dad’s dad, and there is no nicer Power Plant Man than Ray Eberle.
Power Plant Men 
I remember a time when I would have chose the bigger shovel, perhaps in the early 70’s. I was moving steel in a manufacturing plant. Carrying three bars on each shoulder seemed better than the two they suggested. We finished earlier, had to do other work, but somehow it felt better. Thanks for another interesting story and a wake-up call to younger days. Thanks also for the explanations. I love mechanical things and I get the impression that these plants are one big mechanical adventure.