Tag Archives: David Foster

“I Think I Can, I Think I Can” and Other Power Plant Chants

Originally Posted on August 3, 2012 (I added a picture of Walt Oswalt):

The second summer as Summer Help at the Coal-fired Power Plant, was when I first worked out of the Automotive garage.  It wasn’t finished during the first summer.  The second summer when I began working in the garage, Jim Heflin, Larry Riley, Doug House  and Ken Conrad were the regular workers that mowed the fields using tractors with brush hogs, as I have explained in previous posts.  A summer help that also worked with us from Ponca City named David Foster was also able to mow grass using one of the new Ford tractors that we painted Orange to easily identify them as belonging to the Electric Company in Oklahoma.

I learned to drive the tractors later in the summer when I worked irrigating the fields in our attempt to grow grass (as told in the post “When a Power Plant Man Talks, It Pays To Listen“).  The next summer I was able to mow grass using a Brush Hog pulled behind a tractor:

brushhog

Almost Like this without the safety guards and just about as new

It didn’t take long before I had to mow grass on the side of the dam (and other levies).  The side of the dam has a very sharp incline, so while mowing grass on the side of the dam you sat more on the side of the tractor seat than on the seat itself.  Heavy weights were put on the front of the tractor and the back tires on the tractor were turned around so that they were farther apart than they would be otherwise.  This gave the tractor a lower, wider profile and a lower center of gravity helping to keep it from rolling over sideways down the slope.

Tractor Weights that fit on the front of the tractor

I had watched Jim, Larry, Ken and David mow grass along some very steep inclines the summer before without any tractors tumbling over, so I felt like it must be safe, even though looking at the tractors they still seemed a little “top heavy”.

The dam had a slope this steep but  much was taller

It was quite an eerie feeling the first time I actually mowed a slope this steep.  I experienced the same feeling as you have on a roller coaster when it hits the top of the hill and flings you down real fast when the tractor tire on the downhill side of the tractor rolls into a washed out spot on the dam causing the tractor to roll over just a little farther than you are used to.  It was definitely an adrenaline rush each time this happened, because it felt like the tractor was going to roll over.

That is when I remembered the story about the little engine that was trying to pull the train over the steep mountain, and he kept chanting, “I think I can, I think I can” over and over.  So, between each decade of the Rosary that I was saying while counting Hail Mary’s on my fingers, I added in an “I Think I can…” as an added prayer before the next “Our Father”.

The Little Power Plant Coal Train that Could

The Little Power Plant Coal Train that Could

In the time that I worked as a summer help we never turned over a tractor while mowing on a slope.  That isn’t to say that the tractors didn’t start to tip over.  It’s just that if you realize that the large back tractor tire has left the ground and is spinning freely, you could quickly turn the steering wheel downhill so that the tractor would turn downhill preventing it from rolling completely over.  The weight of the brush hog on the back helped to keep the tractor snug against the sloping dam.

Years later, after I left the Power Plant, in 2006, my father’s best friend, Tom Houghton, a Veterinarian in Lakeland, Florida was killed in a tractor accident at his family’s farm in Polo, Missouri.  This greatly effected my father.  He has not recovered from the loss of his friend still today.  As I was mowing grass and picturing my sudden demise if a tractor were to roll down the hill, my main concern was the sorrow my family would have felt by my death.  Needless to say… I never toppled a tractor.

It was during that same summer in 1981 that I first worked with the Power Plant Icon Walt Oswalt.  Every plant must have at least one person like Walt.  He is the type of person that once he has something in his mind about how to do something, nothing is going to change it.  I know many different stories about Walt Oswalt that have been shared with me, but this is one of my own.  Walt is a sandy-haired Irish-looking man that always reminded me of the little old man, Jackie Wright, on the Benny Hill Show.

Walt reminded me of Jackie Wright only with more hair

I now have an actual picture of Walt that I found laying around….

Walt Oswalt

Walt Oswalt — See the resemblence?  not much more hair

One Saturday while I had caught a ride to the Power Plant to do “coal cleanup” the crew was asked who would like to wash down belts 10 and 11.  These are the 1/2 mile long belts that go from the coalyard all the way up to the plant.  You can see them on the left side of the picture of the plant on the side of this post.  Finding the opportunity for a challenge, I volunteered.

I made my way up to the top of the Transfer tower where I found Walt Oswalt.  He was working out of the coalyard at the time and was helping us wash down 10 and 11 belt.  Wearing rainsuits and rubber boots we began at the top and worked our way down.  It didn’t look like this belt had been washed down for a while.  We could blast the tin enclosure with the high pressure hoses we were using to completely wash off all the coal dust that had built up over time.  This looked like it was going to be a fun job.

Then Walt pointed out to me that most of our work was under the belt where the coal had built up almost solid up to the belt itself so that the coal was rubbing on the rubber Uniroyal conveyor belt.  Remember, if the conveyor belt goes up, it has to go back down also.  So underneath the conveyor is where the belt returns.  it is a big loop.

Directly underneath this conveyor is the return for the belt

So, Walt Oswalt and I spent the rest of the day laying on the grating so we could see under the belts washing the coal down the slope of belt 10 and 11.  Under the conveyor is another set of rollers that the rubber conveyor belt rides on it’s return trip to the Crusher Tower.  During this time there were two chants that came to my mind…. One was, “Whistle While you Work”, since we seemed to be in some kind of coal mine working away like the Seven Dwarfs (you know…  Walt Disney… Walt Oswalt).  The other one was the song, “Workin’ In a Coal Mine” (…goin’ down down).

Disney’s Seven Dwarfs Mining

At one particular spot the coal had built up and packed itself in there so much that one of the rollers wasn’t able to turn and the belt was just rubbing on the roller.  After we had washed the coal away we could see that the roller was not able to turn still because the belt had worn it flat on one side.

Walt called the Control Room to shutdown the belt so that we could look at it.  We could see that the roller was bad.  For some reason the other belt (11) was out of commission so without this belt running, no coal was being sent up to the plant.  The coal silos and the surge bin hold enough coal for a while but not for too long during the summer when the units need to run at their maximum rate to supply the electricity needed by the customers.  We could have the belt shutdown for a while, but not for too long.

I followed Walt down the belt to the Crusher Tower wondering what he had in mind.  He didn’t tell me what we were going to do, so I just gathered my clues by watching what he did.  When we came out of the belt and left the Crusher I was surprised that it was already dark outside.  When I had left the Maintenance Shop it had been morning.  Now it was dark.  We had spent the entire day (12 hours at this point) in Belt 10 and 11.  I didn’t remember ever taking a break or eating lunch or even going to the bathroom.  Just holding the high pressure water hose, directing the stream down under the belt… all day.

We walked over to a new building that was still being built called the Coalyard Maintenance Building.  This was the new building that was going to be used by the new Labor Crew in a few months. Outside the building to one side was a Conex Box, as I have described before.  This is the kind of large box that you see on the CSX train commercials that are being transported by trains.

A Conex Box

We used them to store equipment used for specific jobs or crews.  In this case, the Conex box had conveyor equipment in it.  Walt found a long straight roller that is used under the Number 10 and 11 belts and tied it to a 2 wheel dolly.  We rolled it back to the Crusher Tower and began the long trek back up the belt.  I was pulling the dolly and Walt was carrying some large wrenches.

When we arrived at the spot where the roller had been worn, Walt called the control room to let them know we were beginning to work.  We pulled the safety cords on the side of the conveyor to ensure that the belt would not start, even though we were assured that a Clearance had been placed on the breaker in the Main Switchgear (where I began my first war with the spiders a year later.  See the post “Power Plant Spider Wars and Bugs in the Basement“).

Walt climbed over the belt and I stayed on the main walkway.   We worked upside down for a while unbolting the roller.  At one point we decided we needed some more suitable tools and headed back down the belt to the Coalyard Garage where the heavy equipment is serviced and brought back some large ratchet wrenches and sockets with an extension.

Socket Wrench with extension

I think the chant, “I think I can, I think I can” was running through my head on our second trip back up the conveyor belt.  I think it was around 10pm.  We finished changing the roller and decided to leave the old one laying in the walkway for the night.  Walt said he would bring it back to the coalyard on Monday morning.

We made our way back to the Maintenance shop where I took off the rain suit and rubber boots that I had been wearing all day and put my regular boots back on.  I went up to the control room and asked if anyone could give me a ride to Stillwater since the evening shift of operators were just getting off at 11pm. I believe it was Charles Buchanan that gave me a ride home that night in his little beat up pickup truck.

I never worked directly with Charles Buchanan since he was an operator.  The first impression that one may have is that he looks like a caricature of a construction worker in a comic strip.

First Impression of Charles Buchanan

Charles reaffirmed my belief that Power Plant Men are some of the nicest people you will ever meet.  There were a few times when I caught a ride with Charles to or from the plant.  Each time I felt honored to ride in his truck.  If I think about what chant was running through my mind as we were on our way home at night, I think it would be something like the song “You’ve Got a Friend”: “Winter, spring, summer, or fall, all you have to do is call, Lord, I’ll be there, yeah, yeah, you’ve got a friend….”

That is what all real Power Plant men and linemen are like.  Wherever you look in the United States, these great men and women work tirelessly to keep you safe by providing electricity to your homes.  Something we take for granted until the power goes out.

Recently when the power went out in the east, the linemen from this electric company drove with pride, eager to help those in need:

A convoy of Electric Company Trucks on their way from Oklahoma to Indiana to help return power to millions of Americans in the dark

Below I have included the lyrics for the song “You’ve Got a Friend” by Carole King and her husband James Taylor.  See how well it fits those people that work around the clock bringing the power to your home:

You just call out my name, and you know where ever I am
I’ll come running to see you again.
Winter, spring, summer, or fall, all you have to do is call and I’ll be there, yeah, yeah,
you’ve got a friend.

If the sky above you should turn dark and full of clouds
and that old north wind should begin to blow,
keep your head together and call my name out loud.
Soon I will be knocking upon your door.
You just call out my name, and you know where ever I am
I’ll come running to see you again.
Winter, spring, summer, or fall, all you have to do is call and I’ll be there.

Hey, ain’t it good to know that you’ve got a friend? People can be so cold.
They’ll hurt you and desert you. Well, they’ll take your soul if you let them,
oh yeah, but don’t you let them.

You just call out my name, and you know where ever I am
I’ll come running to see you again.
Winter, spring, summer, or fall, all you have to do is call, Lord, I’ll be there, yeah, yeah,
you’ve got a friend. You’ve got a friend.
Ain’t it good to know you’ve got a friend. Ain’t it good to know you’ve got a friend.
Oh, yeah, yeah, you’ve got a friend.

Here is a YouTube video of James Taylor singing this song:

If your aren’t able to play youtube videos directly from the picture… here is the link:  “You’ve got a Friend

Advertisements

Why Stanley Elmore and Other Power Plant Questions

Originally posted September 7, 2012:

Why Stanley Elmore?  I suppose that was on the mind of a few Power Plant Men when the foreman for the new Automotive Garage and Yard crew was chosen in 1980.  What did Stanley have that the rest of the Power Plant Men lacked?  Why did Stanley accept such a position in a power plant out in the middle of nowhere in the plains of Oklahoma?  I have some thoughts about these questions and others that I will share with the rest of the Power Plant Kingdom.

When I returned to the Power Plant for my second summer as a summer help in 1980, I found that the Automotive Garage had been finished and a new crew had been assigned to work from this shop.  Doug House, Jim Heflin, Larry Riley and Ken Conrad were there to welcome me.  I had only known Larry from the year before and when he saw that I was returning, he actually said he was glad to see me.  It was usually hard to tell what Larry was thinking because he kept a straight face even when he was chuckling under his breath.  So, I never really knew what he thought about me until he told the others that he was glad that I would be working there this summer.

Then the new foreman walked in.  He was a medium height stocky man that had obviously come from another plant and was well seasoned in the ways of Power Plant etiquette.  This required him to act as if I had just walked into a snake pit and my summer was going to be a living Hell working under him.   Of course I accepted this well knowing that this merely meant that he had a lot for us to do during the summer and I should enjoy myself.

There was another summer help there, David Foster.  He had been hired because he had experience driving a Tractor, and he would spend a lot of the time that summer mowing grass.  That is, until he wrecked a new brush hog while going perpendicular across a ditch at too high rate of speed.

brushhog

Almost Like this without the safety guards and just about as new

(Boy, I’m getting a lot of mileage out of that one picture of a Brush Hog).  At that point, he started working on watering the grass, as I did (and you can read about that in the post “When Power Plant Men Talk, It Pays to Listen“).

A short time after I had been there I realized that there was another resident of the garage.  It was Don Pierce that came from Construction to operate the P&H Crane used by the Plant.  Here is a Picture of the same kind of P&H Crane that Don Pierce operated for at least two of the summers that I was working out of the Garage.

A P&H Crane, just like the one at the plant

Don Pierce was a tall person with a moustache and tinted glasses.  He was chewing something often that he spit into a cup or a Coke can, that made a squeaky squirty sound each time he spit.  He always looked to me like he wore the same size jeans that he wore when he graduated from High School, even though the rest of him had filled out some.  Making him look like his upper body had been squeezed some out of his jeans.  Like Hank Hill in King of the Hill:

Don had too tight jeans like this only his belt buckle was much bigger

It didn’t take long to figure out that Stanley Elmore loved to play jokes on people.  He would get the biggest laugh from causing someone a moment of confusion.  He would shake his head and laugh and say, “oooooohhh weeee” (or something similar).  I always had a bigger kick out of watching Stanley’s reaction to someone encountering his joke than I did from the joke itself.  As you may have learned from an earlier post “Power Plant Painting Lessons with Aubrey Cargill“, that I was the target of at least some of his jokes.  It would make me laugh to know that Stanley was playing a joke on me.

Actually, anytime during my time at the plant it made me laugh to find that someone was playing a joke on me.  I remember while I was a janitor that one day while I was cleaning out the bathroom in the Electric Shop, I would first Sweep out the bathroom and then mop it.  Many times I turned around to pick up something that was sitting just outside the door of the bathroom I found that it had moved.

Like the mop bucket had moved down to the door by the lab.  Everyone in the shop was just doing their normal job.  But when I walked out of the bathroom to find the handle missing from the push broom and Andy Tubbs and Ben Davis sitting at the break table acting like nothing was wrong, I had to walk back into the bathroom in order to keep them from seeing how hard I was laughing.

For some reason that was the funniest joke I encountered.  To turn around in one moment and have the broom handle gone and the broom itself just sitting on the floor with no handle and the obvious culprit Andy Tubbs trying his best to keep a straight face and act like he wasn’t noticing anything.  I still laugh when I think about it 30 years later.

Stanley’s jokes were of that caliber.  When Don Pierce drove to work one day on his new Harley Davidson Motorcycle,  Stanley just couldn’t resist.  He started out by asking him if he noticed that it leaked oil.  Don said it better not, because he just bought it brand new.  Stanley answered by saying that Harley Davidsons always leaked oil.

A Harley Davidson similar to the one Don Pierce had

So, while Don was out operating the P&H Crane, Stanley took a small cup of oil and poured a little oil spot under his motorcycle, just as a reminder to Don that all Harleys in 1980 leaked oil.  Then Stanley watched and waited for Don to stroll by his motorcycle in the parking lot during lunch to see what his reaction would be.  Of course, Don had been an Electric Company Construction worker long enough to spot a snow job when he saw a grease spot.  But it did make him smile to know that Stanley had gone through the trouble of putting an oil spot under his motorcycle.  —  That’s one way to know that someone really cares about you.  They are willing to take the time out of their busy day to play a little power plant joke on you.

I was able to work one-on-one with Don Pierce for about a week that summer when we had to go to the laydown yard by the main gate and organize all the spare cable, rebar, piping, et cetera into neat rows and in some kind of order like from largest to smallest.  In order to put the large reels of cable into neat rows, we would line up two rows of very large telephone poles close to each other, and then place the reels on the poles to keep them off of the ground so they would last longer, and not sink into the ground when it rained.

To give you an idea. Some of the wooden reels were taller than me

Don was operating the crane and I was doing my best to use the newly learned hand signals to direct him where to go and what to do.  There was a hand signal for everything, and I was afraid that if I stopped to itch my nose, Don would cut the engine and leave for lunch.

I had been studying this chart during break before we went to the laydown yard

We were picking up wooden telephone poles and carefully placing them in a line, and I was standing there guiding the poles into place as they were lowered to the ground.  At one point, I had signaled Don to lower the pole all the way to the ground and as I turned to undo the chokers from under the poles, I realized that the pole had been placed right on top of my feet, and I couldn’t move.  It was at times like that when I was glad that I was wearing Steel Toed Boots.  —  A must when you are working in a power plant.

Steel Toed Boots

So, finding myself stuck, I straightened myself up and signaled to Don that I wanted him to raise the pole up.  He looked a little confused as if he thought I had given him the wrong signal (again…).  But when I didn’t change my signal, he succumbed and raised the pole off the ground.  At that point, I took one step backward and with the straightest face I could muster, I signaled for Don to lower the pole back to the ground.  I saw the smile go across Don’s face when he finally realized that I had been held captive by the pole, and I smiled back because at that point, I couldn’t look serious, and what would be the point anyway.

During the first summer that Stanley was my foreman, I carpooled with him and 5 others.  We would all pile into Stanley’s station wagon and head home at the end of the day.  I would be dropped off at the corner of Washington and Lakeview Dr. in Stillwater and would walk the rest of the way home, about a mile down the road and across a field to my parent’s house.  We each paid Stanley $5.00 each week for the ride, and we didn’t have to worry about the gas and the driving.  It was left up to Stanley.

So, why Stanley?  That was the question I was going to answer when I started this post.  Well.  I think I have a good reason.  All during the summer, Stanley was studying different types of weed killers that could be used around the lake without causing harm to the lake itself.  He was very conscious about keeping the lake pristine and free from poisonous chemicals.

He finally found a weed killer that was approved by the department of Agriculture at Oklahoma State University in Stillwater to be used around lakes.  By Stanley’s conscientious view of the Power Plant Property, I could see that he was a good choice for supervising the yard crew.  We did spend many hours driving down the roadways spraying the newly mowed and chopped weeds with weed killer with the knowledge that we weren’t causing more harm than good.

But that wasn’t the only reason.  I think Stanley was put over the garage crew because he took such great care with his own vehicles.  I had the opportunity to see the engine in the station wagon that ferried us to work and home each day, and when I first saw it, I was astounded.  The entire engine was cleaned and polished and even waxed!

Shiny like this engine is shiny

Even though the engine had over 100,000 miles on it, it looked brand new.  Stanley said that he keeps his engine spotless so that at the first sign of any kind of leak, he takes the steps necessary to fix it before it becomes a real problem.

I remember one Monday morning while we were on the way to work, and the Power Plant Men in the car, which included John Blake and another inspector, were talking about what they did over the weekend.  Stanley said that he spent all day Saturday cleaning his car.  I knew what he meant.  That included waxing his engine.

I had the opportunity to go to Stanley’s house one day to drop something off or pick something up, I don’t remember, but what I do remember is that when I arrived at his humble abode, the front yard, as small and normal as the rest of the neighborhood, was so well groomed.  It looked like someone had taken a scissors and carefully clipped all of the blades of grass just the right height.  The various rocks and bird bath, and other yard ornaments were placed so perfectly that it had transformed this normal little yard into a complete work of art.

A yard not near as perfect as Stanley’s

So, why was Stanley chosen to be the foreman over the yard crew and the Automotive garage?  I believe it was because he had demonstrated by the way he took care of his own property that those in the Electric Company who knew that, knew that he was a man that would take care of their property equally as well.  So, I salute Stanley for being a great foreman to work for, and never letting the work seem dull.  He treated everyone in the shop with respect (except maybe in the middle of a joke).  I wish I had a picture to show you, because I was unable to think of any actor or historical figure that reminds me of him.  There just isn’t anyone else quite like Stanley.

Comments from the original Post:

Monty Hansen:

Powerplant jokes are the greatest! I remember one time I was going on vacation (as a Control Room Operator) and my assistant was filling in for me for the first time (let’s call him “Dave”) well, anyway the Shift Supervisor asked me if I felt Dave was up to the task (Dave is an excellant operator). I told the Supervisor I had faith in Dave, but he should keep a close eye on him, so the whole time I was on vacation, the Supervisor hovered over Dave’s shoulder like a buzzing mosquito! And to add icing to the cake, on Dave’s performance appraisal the Supervisor wrote “Dave is a competent operator…but needs a little too much personal supervision!!

This is the kind of fun powerplant men have with each other, no one is closer than a CO and his assistant, and Dave was, and always will be a great friend. We’ve been to each others weddings & helped each other through divorces. He’s a Control Room Operator of his own crew now, but we still get a kick out of laughing over the good times we had working together.

Fred:

A book could/should be written on all the classic power plant jokes over the years. Some of the oldest I’ve heard from the Osage and Belle Isle vintage power plant men.

Jack Curtis:

Something that comes through these stories: There existed in those days a very different attitude toward both one’s work and one’s coworkers, at least in industrial settings. I found it in both aircraft manufacturing and the telephone business.

It doesn’t seem to exist today or at least, isn’t obvious and I think that represents an unfortunate loss to our society…

Ron:

Steel toed boots are a great safety idea around a power plant. One of the employee benefits I enjoyed while working at the WFEC Hugo power plant was a new pair of steel toed boots every year. I’ve still got a pair of them. I wore them last May while clearing tornado debris in Moore, OK. And I gave a pair to my grandson. He wears them everywhere (even to church!).

Thanks for these memories, Kevin. They’re great!

Why Stanley Elmore and Other Power Plant Questions

Originally posted September 7, 2012:

Why Stanley Elmore?  I suppose that was on the mind of a few Power Plant Men when the foreman for the new Automotive Garage and Yard crew was chosen in 1980.  What did Stanley have that the rest of the Power Plant Men lacked?  Why did Stanley accept such a position in a power plant out in the middle of nowhere in the plains of Oklahoma?  I have some thoughts about these questions and others that I will share with the rest of the Power Plant Kingdom.

When I returned to the Power Plant for my second summer as a summer help in 1980, I found that the Automotive Garage had been finished and a new crew had been assigned to work from this shop.  Doug House, Jim Heflin, Larry Riley and Ken Conrad were there to welcome me.  I had only known Larry from the year before and when he saw that I was returning, he actually said he was glad to see me.  It was usually hard to tell what Larry was thinking because he kept face even when he was chuckling under his breath.  So, I never really knew what he thought about me until he told the others that he was glad that I would be working there this summer.

Then the new foreman walked in.  He was a medium height stocky man that had obviously come from another plant and was well seasoned in the ways of Power Plant etiquette.  This required him to act as if I had just walked into a snake pit and my summer was going to be a living Hell working under him.   Of course I accepted this well, knowing that this merely meant that he had a lot for us to do during the summer and I should enjoy myself.

There was another summer help there, David Foster.  He had been hired because he had experience driving a Tractor, and he would spend a lot of the time that summer mowing grass.  That is, until he wrecked a new brush hog while going perpendicular across a ditch at too high rate of speed.

brushhog

Almost Like this without the safety guards and just about as new

(Boy, I’m getting a lot of mileage out of that one picture of a Brush Hog).  At that point, he started working on watering the grass, as I did (and you can read about that in the post “When Power Plant Men Talk, It Pays to Listen“).

A short time after I had been there I realized that there was another resident of the garage.  It was Don Pierce that came from Construction to operate the P&H Crane used by the Plant.  Here is a Picture of the same kind of P&H Crane that Don Pierce operated for at least two of the summers that I was working out of the Garage.

A P&H Crane, just like the one at the plant

Don Pierce was a tall person with a moustache and tinted glasses.  He was chewing something often that he spit into a cup or a Coke can, that made a squeaky squirty sound each time he spit.  He always looked like to me like he wore the same size jeans that he wore when he graduated from High School, even though the rest of him had filled out some.  Making him look like his upper body had been squeezed some out of his jeans.  Like Hank Hil in King of the Hill:

Don had too tight jeans like this only his belt buckle was much bigger

It didn’t take long to figure out that Stanley Elmore loved to play jokes on people.  He would get the biggest laugh from causing someone a moment of confusion.  He would shake his head and laugh and say, “oooooohhh weeee” (or something similar).  I always had a bigger kick out of watching Stanley’s reaction to someone encountering his joke than I did from the joke itself.  As you may have learned from an earlier post “Power Plant Painting Lessons with Aubrey Cargill“, that I was the target of at least some of his jokes.  It would make me laugh to know what Stanley was playing a joke on me.

Actually, anytime during my time at the plant it made me laugh to find that someone was playing a joke on me.  I remember while I was a janitor that one day while I was cleaning out the bathroom in the Electric Shop, I would first Sweep out the bathroom and then mop it.  Each time I turned around to pick up something that was sitting just outside the door of the bathroom, I found that something had moved.

Like the mop bucket had moved down to the door by the lab.  Everyone in the shop was just doing their normal job.  But when I walked out of the bathroom to find the handle missing from the push broom and Andy Tubbs and Ben Davis sitting at the break table acting like nothing was wrong, I had to walk back into the bathroom in order to keep them from seeing how hard I was laughing.

For some reason that was the funniest joke I encountered.  To turn around in one moment and have the broom handle gone and the broom itself just sitting on the floor with no handle and the obvious culprit Andy Tubbs trying his best to keep a straight face and act like he wasn’t noticing anything.  I still laugh when I think about it 30 years later.

Stanley’s jokes were of that caliber.  When Don Pierce drove to work one day on his new Harley Davidson Motorcycle,  Stanley just couldn’t resist.  He started out by asking him if he noticed that it leaked oil.  Don said it better not, because he just bought it brand new.  Stanley answered by saying that Harley Davidsons always leaked oil.

A Harley Davidson similar to the one Don Pierce had

So, while Don was out operating the P&H Crane, Stanley took a small cup of oil and poured a little oil spot under his motorcycle, just as a reminder to Don that all Harleys in 1980 leaked oil.  Then Stanley watched and waited for Don to stroll by his motorcycle in the parking lot during lunch to see what his reaction would be.  Of course, Don had been an Electric Company Construction worker long enough to spot a snow job when he saw a grease spot.  But it did make him smile to know that Stanley had gone through the trouble of putting an oil spot under his motorcycle.  —  That’s one way to know that someone really cares about you.  They are willing to take the time out of their busy day to play a little power plant joke on you.

I was able to work one-on-one with Don Pierce for about a week that summer when we had to go to the laydown yard by the main gate and organize all the spare cable, rebar, piping, et cetera into neat rows and in some kind of order like from largest to smallest.  In order to put the large reels of cable into neat rows, we would line up two rows of very large telephone poles close to each other, and then place the reels on the poles to keep them off of the ground so they would last longer, and not sink into the ground when it rained.

To give you an idea. Some of the wooden reels were taller than me

Don was operating the crane and I was doing my best to use the newly learned hand signals to direct him where to go and what to do.  There was a hand signal for everything, and I was afraid that if I stopped to itch my nose, Don would cut the engine and leave for lunch.

I had been studying this chart during break before we went to the laydown yard

We were picking up wooden telephone poles and carefully placing them in a line, and I was standing there guiding the poles into place as they were lowered to the ground.  At one point, I had signaled Don to lower the pole all the way to the ground and as I turned to undo the chokers from under the poles, I realized that the pole had been placed right on top of my feet, and I couldn’t move.  It was at times like that when I was glad that I was wearing Steel Toed Boots.  —  A must when you are working in a power plant.

Steel Toed Boots

So, finding myself stuck, I straightened myself up and signaled to Don that I wanted him to raise the pole up.  He looked a little confused as if he thought I had given him the wrong signal (again…).  But when I didn’t change my signal, he succumbed and raised the pole off the ground.  At that point, I took one step backward and with the straightest face I could muster, I signaled for Don to lower the pole back to the ground.  I saw the smile go across Don’s face when he finally realized that I had been held captive by the pole, and I smiled back because at that point, I couldn’t look serious, and what would be the point anyway.

During the first summer that Stanley was my foreman, I carpooled with him and 5 others.  We would all pile into Stanley’s station wagon and head home at the end of the day.  I would be dropped off at the corner of Washington and Lakeview Dr. in Stillwater and would walk the rest of the way home, about a mile down the road and across a field to my parent’s house.  We each paid Stanley $5.00 each week for the ride, and we didn’t have to worry about the gas and the driving.  It was left up to Stanley.

So, why Stanley?  That was the question I was going to answer when I started this post.  Well.  I think I have a good reason.  All during the summer, Stanley was studying different types of weed killers that could be used around the lake without causing harm to the lake itself.  He was very conscious about keeping the lake pristine and free from poisonous chemicals.

He finally found a weed killer that was approved by the department of Agriculture at Oklahoma State University in Stillwater to be used around lakes.  By Stanley’s conscientious view of the Power Plant Property, I could see that he was a good choice for supervising the yard crew.  We did spend many hours driving down the roadways spraying the newly mowed and chopped weeds with weed killer with the knowledge that we weren’t causing more harm than good.

But that wasn’t the only reason.  I think Stanley was put over the garage crew because he took such great care with his own vehicles.  I had the opportunity to see the engine in the station wagon that ferried us to work and home each day, and when I first saw it, I was astounded.  The entire engine was cleaned and polished and even waxed!

Shiny like this engine is shiny

Even though the engine had over 100,000 miles on it, it looked brand new.  Stanley said that he keeps his engine spotless so that at the first sign of any kind of leak, he takes the steps necessary to fix it before it becomes a real problem.

I remember one Monday morning while we were on the way to work, and the Power Plant Men in the car, which included John Blake and another inspector, were talking about what they did over the weekend.  Stanley said that he spent all day Saturday cleaning his car.  I knew what he meant.  That included waxing his engine.

I had the opportunity to go to Stanley’s house one day to drop something off or pick something up, I don’t remember, but what I do remember is that when I arrived at his humble abode, the front yard, as small and normal as the rest of the neighborhood, was so well groomed.  It looked like someone had taken a scissors and carefully clipped all of the blades of grass just the right height.  The various rocks and bird bath, and other yard ornaments were placed so perfectly that it had transformed this normal little yard into a complete work of art.

A yard not near as perfect as Stanley’s

So, why was Stanley chosen to be the foreman over the yard crew and the Automotive garage?  I believe it was because he had demonstrated by the way he took care of his own property that those in the Electric Company who knew that, knew that he was a man that would take care of their property equally as well.  So, I salute Stanley for being a great foreman to work for, and never letting the work seem dull.  He treated everyone in the shop with respect (except maybe in the middle of a joke).  I wish I had a picture to show you, because I was unable to think of any actor or historical figure that reminds me of him.  There just isn’t anyone else quite like Stanley.

Comments from the original Post:

Monty Hansen:

Powerplant jokes are the greatest! I remember one time I was going on vacation (as a Control Room Operator) and my assistant was filling in for me for the first time (let’s call him “Dave”) well, anyway the Shift Supervisor asked me if I felt Dave was up to the task (Dave is an excellant operator). I told the Supervisor I had faith in Dave, but he should keep a close eye on him, so the whole time I was on vacation, the Supervisor hovered over Dave’s shoulder like a buzzing mosquito! And to add icing to the cake, on Dave’s performance appraisal the Supervisor wrote “Dave is a competent operator…but needs a little too much personal supervision!!

This is the kind of fun powerplant men have with each other, no one is closer than a CO and his assistant, and Dave was, and always will be a great friend. We’ve been to each others weddings & helped each other through divorces. He’s a Control Room Operator of his own crew now, but we still get a kick out of laughing over the good times we had working together.

Fred:

A book could/should be written on all the classic power plant jokes over the years. Some of the oldest I’ve heard from the Osage and Belle Isle vintage power plant men.

Jack Curtis:

Something that comes through these stories: There existed in those days a very different attitude toward both one’s work and one’s coworkers, at least in industrial settings. I found it in both aircraft manufacturing and the telephone business.

It doesn’t seem to exist today or at least, isn’t obvious and I think that represents an unfortunate loss to our society…

Ron:

Steel toed boots are a great safety idea around a power plant. One of the employee benefits I enjoyed while working at the WFEC Hugo power plant was a new pair of steel toed boots every year. I’ve still got a pair of them. I wore them last May while clearing tornado debris in Moore, OK. And I gave a pair to my grandson. He wears them everywhere (even to church!).

Thanks for these memories, Kevin. They’re great!

“I Think I Can, I Think I Can” and Other Power Plant Chants

Originally Posted on August 3, 2012 (I added a picture of Walt Oswalt):

The second summer as Summer Help at the Coal-fired Power Plant, was when I first worked out of the Automotive garage.  It wasn’t finished during the first summer.  The second summer when I began working in the garage, Jim Heflin, Larry Riley, Doug House  and Ken Conrad were the regular workers that mowed the fields using tractors with brush hogs, as I have explained in previous posts.  A summer help that also worked with us from Ponca City named David Foster was also able to mow grass using one of the new Ford tractors that we painted Orange to easily identify them as belonging to the Electric Company in Oklahoma.

I learned to drive the tractors later in the summer when I worked irrigating the fields in our attempt to grow grass (as told in the post “When a Power Plant Man Talks, It Pays To Listen“).  The next summer I was able to mow grass using a Brush Hog pulled behind a tractor:

brushhog

Almost Like this without the safety guards and just about as new

It didn’t take long before I had to mow grass on the side of the dam (and other levies).  The side of the dam has a very sharp incline, so while mowing grass on the side of the dam you sat more on the side of the tractor seat than on the seat itself.  Heavy weights were put on the front of the tractor and the back tires on the tractor were turned around so that they were farther apart than they would be otherwise.  This gave the tractor a lower, wider profile and a lower center of gravity helping to keep it from rolling over sideways down the slope.

Tractor Weights that fit on the front of the tractor

I had watched Jim, Larry, Ken and David mow grass along some very steep inclines the summer before without any tractors tumbling over, so I felt like it must be safe, even though looking at the tractors they still seemed a little “top heavy”.

The dam had a slope this steep but  much was taller

It was quite an eerie feeling the first time I actually mowed a slope this steep.  I experienced the same feeling as you have on a roller coaster when it hits the top of the hill and flings you down real fast when the tractor tire on the downhill side of the tractor rolls into a washed out spot on the dam causing the tractor to roll over just a little farther than you are used to.  It was definitely an adrenaline rush each time this happened, because it felt like the tractor was going to roll over.

That is when I remembered the story about the little engine that was trying to pull the train over the steep mountain, and he kept chanting, “I think I can, I think I can” over and over.  So, between each decade of the Rosary that I was saying while counting Hail Mary’s on my fingers, I added in an “I Think I can…” as an added prayer before the next “Our Father”.

The Little Power Plant Coal Train that Could

The Little Power Plant Coal Train that Could

In the time that I worked as a summer help we never turned over a tractor while mowing on a slope.  That isn’t to say that the tractors didn’t start to tip over.  It’s just that if you realize that the large back tractor tire has left the ground and is spinning freely, you could quickly turn the steering wheel downhill so that the tractor would turn downhill preventing it from rolling completely over.  The weight of the brush hog on the back helped to keep the tractor snug against the sloping dam.

Years later, after I left the Power Plant, in 2006, my father’s best friend, Tom Houghton, a Veterinarian in Lakeland, Florida was killed in a tractor accident at his family’s farm in Polo, Missouri.  This greatly effected my father.  He has not recovered from the loss of his friend still today.  As I was mowing grass and picturing my sudden demise if a tractor were to roll down the hill, my main concern was the sorrow my family would have felt by my death.  Needless to say… I never toppled a tractor.

It was during that same summer in 1981 that I first worked with the Power Plant Icon Walt Oswalt.  Every plant must have at least one person like Walt.  He is the type of person that once he has something in his mind about how to do something, nothing is going to change it.  I know many different stories about Walt Oswalt that have been shared with me, but this is one of my own.  Walt is a sandy-haired Irish-looking man that always reminded me of the little old man, Jackie Wright, on the Benny Hill Show.

Walt reminded me of Jackie Wright only with more hair

I now have an actual picture of Walt that I found laying around….

Walt Oswalt

Walt Oswalt — See the resemblence?  not much more hair

One Saturday while I had caught a ride to the Power Plant to do “coal cleanup” the crew was asked who would like to wash down belts 10 and 11.  These are the 1/2 mile long belts that go from the coalyard all the way up to the plant.  You can see them on the left side of the picture of the plant on the side of this post.  Finding the opportunity for a challenge, I volunteered.

I made my way up to the top of the Transfer tower where I found Walt Oswalt.  He was working out of the coalyard at the time and was helping us wash down 10 and 11 belt.  Wearing rainsuits and rubber boots we began at the top and worked our way down.  It didn’t look like this belt had been washed down for a while.  We could blast the tin enclosure with the high pressure hoses we were using to completely wash off all the coal dust that had built up over time.  This looked like it was going to be a fun job.

Then Walt pointed out to me that most of our work was under the belt where the coal had built up almost solid up to the belt itself so that the coal was rubbing on the rubber Uniroyal conveyor belt.  Remember, if the conveyor belt goes up, it has to go back down also.  So underneath the conveyor is where the belt returns.  it is a big loop.

Directly underneath this conveyor is the return for the belt

So, Walt Oswalt and I spent the rest of the day laying on the grating so we could see under the belts washing the coal down the slope of belt 10 and 11.  Under the conveyor is another set of rollers that the rubber conveyor belt rides on it’s return trip to the Crusher Tower.  During this time there were two chants that came to my mind…. One was, “Whistle While you Work”, since we seemed to be in some kind of coal mine working away like the Seven Dwarfs (you know…  Walt Disney… Walt Oswalt).  The other one was the song, “Workin’ In a Coal Mine” (…goin’ down down).

Disney’s Seven Dwarfs Mining

At one particular spot the coal had built up and packed itself in there so much that one of the rollers wasn’t able to turn and the belt was just rubbing on the roller.  After we had washed the coal away we could see that the roller was not able to turn still because the belt had worn it flat on one side.

Walt called the Control Room to shutdown the belt so that we could look at it.  We could see that the roller was bad.  For some reason the other belt (11) was out of commission so without this belt running, no coal was being sent up to the plant.  The coal silos and the surge bin hold enough coal for a while but not for too long during the summer when the units need to run at their maximum rate to supply the electricity needed by the customers.  We could have the belt shutdown for a while, but not for too long.

I followed Walt down the belt to the Crusher Tower wondering what he had in mind.  He didn’t tell me what we were going to do, so I just gathered my clues by watching what he did.  When we came out of the belt and left the Crusher I was surprised that it was already dark outside.  When I had left the Maintenance Shop it had been morning.  Now it was dark.  We had spent the entire day (12 hours at this point) in Belt 10 and 11.  I didn’t remember ever taking a break or eating lunch.  Just holding the high pressure water hose, directing the stream down under the belt… all day.

We walked over to a new building that was still being built called the Coalyard Maintenance Building.  This was the new building that was going to be used by the new Labor Crew in a few months. Outside the building to one side was a Conex Box, as I have described before.  This is the kind of large box that you see on the CSX train commercials that are being transported by trains.

A Conex Box

We used them to store equipment used for specific jobs or crews.  In this case, the Conex box had conveyor equipment in it.  Walt found a long straight roller that is used under the Number 10 and 11 belts and tied it to a 2 wheel dolly.  We rolled it back to the Crusher Tower and began the long trek back up the belt.  I was pulling the dolly and Walt was carrying some large wrenches.

When we arrived at the spot where the roller had been worn, Walt called the control room to let them know we were beginning to work.  We pulled the safety cords on the side of the conveyor to ensure that the belt would not start, even though we were assured that a Clearance had been placed on the breaker in the Main Switchgear (where I began my first war with the spiders a year later.  See the post “Power Plant Spider Wars and Bugs in the Basement“).

Walt climbed over the belt and I stayed on the main walkway.   We worked upside down for a while unbolting the roller.  At one point we decided we needed some more suitable tools and headed back down the belt to the Coalyard Garage where the heavy equipment is serviced and brought back some large ratchet wrenches and sockets with an extension.

Socket Wrench with extension

I think the chant, “I think I can, I think I can” was running through my head on our second trip back up the conveyor belt.  I think it was around 10pm.  We finished changing the roller and decided to leave the old one laying in the walkway for the night.  Walt said he would bring it back to the coalyard on Monday morning.

We made our way back to the Maintenance shop where I took off the rain suit and rubber boots that I had been wearing all day and put my regular boots back on.  I went up to the control room and asked if anyone could give me a ride to Stillwater since the evening shift of operators were just getting off at 11pm. I believe it was Charles Buchanan that gave me a ride home that night in his little beat up pickup truck.

I never worked directly with Charles Buchanan since he was an operator.  The first impression that one may have is that he looks like a caricature of a construction worker in a comic strip.

First Impression of Charles Buchanan

Charles reaffirmed my belief that Power Plant Men are some of the nicest people you will ever meet.  There were a few times when I caught a ride with Charles to or from the plant.  Each time I felt honored to ride in his truck.  If I think about what chant was running through my mind as we were on our way home at night, I think it would be something like the song “You’ve Got a Friend”: “Winter, spring, summer, or fall, all you have to do is call, Lord, I’ll be there, yeah, yeah, you’ve got a friend….”

That is what all real Power Plant men and linemen are like.  Wherever you look in the United States, these great men and women work tirelessly to keep you safe by providing electricity to your homes.  Something we take for granted until the power goes out.

Recently when the power went out in the east, the linemen from this electric company drove with pride, eager to help those in need:

A convoy of Electric Company Trucks on their way from Oklahoma to Indiana to help return power to millions of Americans in the dark

Below I have included the lyrics for the song “You’ve Got a Friend” by Carole King and her husband James Taylor.  See how well it fits those people that work around the clock bringing the power to your home:

You just call out my name, and you know where ever I am
I’ll come running to see you again.
Winter, spring, summer, or fall, all you have to do is call and I’ll be there, yeah, yeah,
you’ve got a friend.

If the sky above you should turn dark and full of clouds
and that old north wind should begin to blow,
keep your head together and call my name out loud.
Soon I will be knocking upon your door.
You just call out my name, and you know where ever I am
I’ll come running to see you again.
Winter, spring, summer, or fall, all you have to do is call and I’ll be there.

Hey, ain’t it good to know that you’ve got a friend? People can be so cold.
They’ll hurt you and desert you. Well, they’ll take your soul if you let them,
oh yeah, but don’t you let them.

You just call out my name, and you know where ever I am
I’ll come running to see you again.
Winter, spring, summer, or fall, all you have to do is call, Lord, I’ll be there, yeah, yeah,
you’ve got a friend. You’ve got a friend.
Ain’t it good to know you’ve got a friend. Ain’t it good to know you’ve got a friend.
Oh, yeah, yeah, you’ve got a friend.

Here is a YouTube video of James Taylor singing this song:

If your aren’t able to play youtube videos directly from the picture… here is the link:  “You’ve got a Friend

“I Think I Can, I Think I Can” and Other Power Plant Chants — Repost

Originally Posted on August 3, 2012:

The second summer as Summer Help at the Coal-fired Power Plant, was when I first worked out of the Automotive garage.  It wasn’t finished during the first summer.  The second summer when I began working in the garage, Jim Heflin, Larry Riley, Doug House  and Ken Conrad were the regular workers that mowed the fields using tractors with brush hogs, as I have explained in previous posts.  A summer help that also worked with us from Ponca City named David Foster was also able to mow grass using one of the new Ford tractors that we painted Orange to easily identify them as belonging to the Electric Company in Oklahoma.

I learned to drive the tractors later in the summer when I worked irrigating the fields in our attempt to grow grass (as told in the post “When a Power Plant Man Talks, It Pays To Listen“).  The next summer I was able to mow grass using a Brush Hog pulled behind a tractor:

brushhog

Almost Like this without the safety guards and just about as new

It didn’t take long before I had to mow grass on the side of the dam (and other levies).  The side of the dam has a very sharp incline, so while mowing grass on the side of the dam you sat more on the side of the tractor seat than on the seat itself.  Heavy weights were put on the front of the tractor and the back tires on the tractor were turned around so that they were farther apart than they would be otherwise.  This gave the tractor a lower, wider profile and a lower center of gravity helping to keep it from rolling over sideways down the slope.

Tractor Weights that fit on the front of the tractor

I had watched Jim, Larry, Ken and David mow grass along some very steep inclines the summer before without any tractors tumbling over, so I felt like it must be safe, even though looking at the tractors they still seemed a little “top heavy”.

The dam had a slope this steep but  much was taller

It was quite an eerie feeling the first time I actually mowed a slope this steep.  I experienced the same feeling as you have on a roller coaster when it hits the top of the hill and flings you down real fast when the tractor tire on the downhill side of the tractor rolls into a washed out spot on the dam causing the tractor to roll over just a little farther than you are used to.  It was definitely an adrenaline rush each time this happened, because it felt like the tractor was going to roll over.

That is when I remembered the story about the little engine that was trying to pull the train over the steep mountain, and he kept chanting, “I think I can, I think I can” over and over.  So, between each decade of the Rosary that I was saying while counting Hail Mary’s on my fingers, I added in an “I Think I can…” as an added prayer before the next “Our Father”.

The Little Power Plant Coal Train that Could

The Little Power Plant Coal Train that Could

In the time that I worked as a summer help we never turned over a tractor while mowing on a slope.  That isn’t to say that the tractors didn’t start to tip over.  It’s just that if you realize that the large back tractor tire has left the ground and is spinning freely, you could quickly turn the steering wheel downhill so that the tractor would turn downhill preventing it from rolling completely over.  The weight of the brush hog on the back helped to keep the tractor snug against the sloping dam.

Years later, after I left the Power Plant, in 2006, my father’s best friend, Tom Houghton, a Veterinarian in Lakeland, Florida was killed in a tractor accident at his family’s farm in Polo, Missouri.  This greatly effected my father.  He has not recovered from the loss of his friend still today.  As I was mowing grass and picturing my sudden demise if a tractor were to roll down the hill, my main concern was the sorrow my family would have felt by my death.  Needless to say… I never toppled a tractor.

It was during that same summer in 1981 that I first worked with the Power Plant Icon Walt Oswalt.  Every plant must have at least one person like Walt.  He is the type of person that once he has something in his mind about how to do something, nothing is going to change it.  I know many different stories about Walt Oswalt that have been shared with me, but this is one of my own.  Walt is a sandy-haired Irish-looking man that always reminded me of the little old man, Jackie Wright, on the Benny Hill Show.

Walt reminded me of Jackie Wright only with more hair

One Saturday while I had caught a ride to the Power Plant to do “coal cleanup” the crew was asked who would like to wash down belts 10 and 11.  These are the 1/2 mile long belts that go from the coalyard all the way up to the plant.  You can see them on the left side of the picture of the plant on the side of this post.  Finding the opportunity for a challenge, I volunteered.

I made my way up to the top of the Transfer tower where I found Walt Oswalt.  He was working out of the coalyard at the time and was helping us wash down 10 and 11 belt.  Wearing rainsuits and rubber boots we began at the top and worked our way down.  It didn’t look like this belt had been washed down for a while.  We could blast the tin enclosure with the high pressure hoses we were using to completely wash off all the coal dust that had built up over time.  This looked like it was going to be a fun job.

Then Walt pointed out to me that most of our work was under the belt where the coal had built up almost solid up to the belt itself so that the coal was rubbing on the rubber Uniroyal conveyor belt.  Remember, if the conveyor belt goes up, it has to go back down also.  So underneath the conveyor is where the belt returns.  it is a big loop.

Directly underneath this conveyor is the return for the belt

So, Walt Oswalt and I spent the rest of the day laying on the grating so we could see under the belts washing the coal down the slope of belt 10 and 11.  Under the conveyor is another set of rollers that the rubber conveyor belt rides on it’s return trip to the Crusher Tower.  During this time there were two chants that came to my mind…. One was, “Whistle While you Work”, since we seemed to be in some kind of coal mine working away like the Seven Dwarfs (you know…  Walt Disney… Walt Oswalt).  The other one was the song, “Workin’ In a Coal Mine” (…goin’ down down).

Disney’s Seven Dwarfs Mining

At one particular spot the coal had built up and packed itself in there so much that one of the rollers wasn’t able to turn and the belt was just rubbing on the roller.  After we had washed the coal away we could see that the roller was not able to turn still because the belt had worn it flat on one side.

Walt called the Control Room to shutdown the belt so that we could look at it.  We could see that the roller was bad.  For some reason the other belt (11) was out of commission so without this belt running, no coal was being sent up to the plant.  The coal silos and the surge bin hold enough coal for a while but not for too long during the summer when the units need to run at their maximum rate to supply the electricity needed by the customers.  We could have the belt shutdown for a while, but not for too long.

I followed Walt down the belt to the Crusher Tower wondering what he had in mind.  He didn’t tell me what we were going to do, so I just gathered my clues by watching what he did.  When we came out of the belt and left the Crusher I was surprised that it was already dark outside.  When I had left the Maintenance Shop it had been morning.  Now it was dark.  We had spent the entire day (12 hours at this point) in Belt 10 and 11.  I didn’t remember ever taking a break or eating lunch.  Just holding the high pressure water hose, directing the stream down under the belt… all day.

We walked over to a new building that was still being built called the Coalyard Maintenance Building.  This was the new building that was going to be used by the new Labor Crew in a few months. Outside the building to one side was a Conex Box, as I have described before.  This is the kind of large box that you see on the CSX train commercials that are being transported by trains.

A Conex Box

We used them to store equipment used for specific jobs or crews.  In this case, the Conex box had conveyor equipment in it.  Walt found a long straight roller that is used under the Number 10 and 11 belts and tied it to a 2 wheel dolly.  We rolled it back to the Crusher Tower and began the long trek back up the belt.  I was pulling the dolly and Walt was carrying some large wrenches.

When we arrived at the spot where the roller had been worn, Walt called the control room to let them know we were beginning to work.  We pulled the safety cords on the side of the conveyor to ensure that the belt would not start, even though we were assured that a Clearance had been placed on the breaker in the Main Switchgear (where I began my first war with the spiders a year later.  See the previous post “Power Plant Spider Wars and Bugs in the Basement“).

Walt climbed over the belt and I stayed on the main walkway.   We worked upside down for a while unbolting the roller.  At one point we decided we needed some more suitable tools and headed back down the belt to the Coalyard Garage where the heavy equipment is serviced and brought back some large ratchet wrenches and sockets with an extension.

Socket Wrench with extension

I think the chant, “I think I can, I think I can” was running through my head on our second trip back up the conveyor belt.  I think it was around 10pm.  We finished changing the roller and decided to leave the old one laying in the walkway for the night.  Walt said he would bring it back to the coalyard on Monday morning.

We made our way back to the Maintenance shop where I took off the rain suit and rubber boots that I had been wearing all day and put my regular boots back on.  I went up to the control room and asked if anyone could give me a ride to Stillwater since the evening shift of operators were just getting off at 11pm. I believe it was Charles Buchanan that gave me a ride home that night in his little beat up pickup truck.

I never worked directly with Charles Buchanan since he was an operator.  The first impression that one may have is that he looks like a caricature of a construction worker in a comic strip.

First Impression of Charles Buchanan

Charles reaffirmed my belief that Power Plant Men are some of the nicest people you will ever meet.  There were a few times when I caught a ride with Charles to or from the plant.  Each time I felt honored to ride in his truck.  If I think about what chant was running through my mind as we were on our way home at night, I think it would be something like the song “You’ve Got a Friend”: “Winter, spring, summer, or fall, all you have to do is call, Lord, I’ll be there, yeah, yeah, you’ve got a friend….”

That is what all real Power Plant men and linemen are like.  Wherever you look in the United States, these great men and women work tirelessly to keep you safe by providing electricity to your homes.  Something we take for granted until the power goes out.

Recently when the power went out in the east, the linemen from this electric company drove with pride, eager to help those in need:

A convoy of Electric Company Trucks on their way from Oklahoma to Indiana to help return power to millions of Americans in the dark

Below I have included the lyrics for the song “You’ve Got a Friend” by Carole King and her husband James Taylor.  See how well it fits those people that work around the clock bringing the power to your home:

You just call out my name, and you know where ever I am
I’ll come running to see you again.
Winter, spring, summer, or fall, all you have to do is call and I’ll be there, yeah, yeah,
you’ve got a friend.

If the sky above you should turn dark and full of clouds
and that old north wind should begin to blow,
keep your head together and call my name out loud.
Soon I will be knocking upon your door.
You just call out my name, and you know where ever I am
I’ll come running to see you again.
Winter, spring, summer, or fall, all you have to do is call and I’ll be there.

Hey, ain’t it good to know that you’ve got a friend? People can be so cold.
They’ll hurt you and desert you. Well, they’ll take your soul if you let them,
oh yeah, but don’t you let them.

You just call out my name, and you know where ever I am
I’ll come running to see you again.
Winter, spring, summer, or fall, all you have to do is call, Lord, I’ll be there, yeah, yeah,
you’ve got a friend. You’ve got a friend.
Ain’t it good to know you’ve got a friend. Ain’t it good to know you’ve got a friend.
Oh, yeah, yeah, you’ve got a friend.