Tag Archives: Gene Roget

Power Plant Cajun and the Hatchet Man

Originally Posted August 30, 2013:

During the 18 years I worked as an electrician at the coal-fired Power Plant in North Central Oklahoma, we often had contractors working from our shop. I have mentioned that from the moment that I first entered the electric shop the first day I was an electrician, one of the first two people I met was a contract electrician. (See the post: “New Home in the Power Plant Electric Shop“).

Gene Roget (pronounced, “Row Jay” with a soft J) was originally from Louisiana.

A Cajun I found on Google Images that slightly resembles Gene Roget

A Cajun I found on Google Images (this is actually the actor Shia Lebeouf) that slightly resembles Gene Roget

Gene had spent the first 10 to 12 years of his adult life as a construction electrician. Charles Foster told him to be my mentor. At first Gene was shocked to find out that instead of hiring him to be a Plant Electrician along with his best buddy, Arthur Hammond, they had hired a young kid who didn’t know squat about being a real Power Plant Electrician. Yeah…. that was me.

I felt sorry for Gene because he obviously was the better candidate. The only saving grace for my mind was the knowledge that I was hired through the internal job program and that if they hadn’t taken me into the electric shop, they were going to be stuck with Charles Peavler. Charles was… well… he was somewhat older, but, well….. he couldn’t get around the fact that no matter what he did, he was always still Charles Peavler.

The day I entered the electric shop, I was 23 years and about 3 weeks old. Charles Peavler was 43. However, Charles might remind you of someone more around the age of 65. Not because he looked quite that old. He looked more like, well… um….. I guess he did look like he was about 65. I couldn’t tell if it was just the way he walked or stood, or the way his lip curled around the wad of skoal between his front lower lip and gums.

Just a pinch between your cheek and gums.... Never tried it myself.

Just a pinch between your cheek and gums…. Never tried it myself.

I know… I’m being a little hard on Charles. I just like to tease him. I could be worse. I could tell you that his first name was really Amos. But I wouldn’t stoop that low. That would be like saying that Andy Tubb’s first name is really Carl, only worse, so I won’t go there. Actually, Peavler looks more like an Amos than a Charles. (Oh. That paragraph was about Amos and Andy!).

Anyway, by hiring me instead of Charles Peavler off of the labor crew I figured that even though I was dumb as dirt as far as being an electrician, I was more apt to learn new things than Charles. So in the long run I was probably the better candidate. Gene Roget wouldn’t have been able to be hired even if they hadn’t chosen me.

There were two openings for electrician when I was hired. Arthur Hammond (Art) was able to be hired by the electric shop was because they convinced the higher-ups that they needed someone with a background in electronics and there weren’t any internal candidates that fit that bill. So Charles Foster, the foreman, made the case that they needed an experienced electrician with electronics background and they needed someone dumb as dirt, but able to learn something more than just how to lace up their steel-toed boot. — That was where I came in.

I figured that Gene Roget would hold a grudge against me for taking the job that he wanted. This is where the true quality of a person may shine through. When you are involved in making someone upset, even though it wasn’t your decision to make, the way a person reacts to you will tell you a lot about that person’s character.

When Charles Foster told Gene Roget to be my mentor and show me the ropes to being an electrician I suspected that I was being setup for failure. “Ok…” I thought, “I’ll watch what he does instead of what he tells me…” I’ll also watch my back to make sure I don’t end up being electrocuted or knocked off of a ledge or some other accident that would create a new opening in the electric shop.

As it turned out Gene Roget was a man of great quality. Not once in the year and a half that I worked with him did I ever have the feeling that Gene wasn’t doing his best to teach me the skills of being the best electrician I could be. It also turned out that Gene was not only eager to teach me, but he was a highly skilled electrician. So, I felt like I was being taught by one of the best.

Gene Roget (I always liked calling him Gene Roget instead of just Gene… I’m not sure why, but I suppose I can blame it on Gene Day. I never could just call him Gene. And Gene Day and Gene Roget rhymed), carpooled with Art Hammond (I always liked calling Art, Arthur, but I’ll call him Art in this post just to make it shorter… except that I just used all these words explaining it that now it’s longer).

Gene and Art were like best buddies. I carpooled with them a couple of times when I had to catch a ride because I had to stay late and my carpooling ride had to leave (that would have been Rich Litzer, Yvonne Taylor and Bill Rivers). During the drive home, I came to learn that Art and Gene had worked with each other on construction jobs for quite a while and their families were close in some ways.

I also learned that there was another activity that they did together that was not all together kosher (I don’t mean in a Jewish way). They asked me on the way into Stillwater one day if I wanted to take a “hit” on the small rolled cigarette they were taking turns taking tokes from. I had spent 4 years prior to this time in college in a dorm where smoking marijuana was more common than cigarettes and the idea didn’t phase me.

I declined, because I had no desire to go down that route. I told them that I wished that they didn’t do that while I was in the car because then my clothes would smell like I had been living in the dorm again, where your clothes were going to smell like that just going from your room to the elevator… At least it was that way my second year in college.

I’m only talking about this now because it was 29 years ago, and by now if Gene Roget wanted to set his grandchildren on his knee and tell them about the times he was a younger construction electrician, he can mention that he had a shady past at one point, but now he’s just a kind old man. So, I’m going to go on with a story that up to now I have only shared with Arthur Hammond.

One day I went into the main switchgear to find some parts in the parts cage behind the electric shop. When I went back there, an operator Dan Landes was in the switchgear with another operator. They were looking for something by the ladders, so I walked over to see if I could help. Maybe they needed the key to unlock the ladders, I thought.

I don’t remember what they wanted, but I do remember that when I walked up to them I immediately smelled the aroma of marijuana being smoked somewhere. We had just recently lost an electrician in our shop when the snitch tricked him into trading some marijuana for a supposedly stolen knife set (see the post “Power Plant Snitch“).

I asked Dan if he smelled that smell. It was pretty strong. I told him that was marijuana, and I could tell him what type it was. You see, even though I had never smoked the stuff, the drug dealer for the entire dorm used to share the bathroom with our room, and three nights each week he held parties in his room. He had high quality stuff and low. There was a definite difference in the smell. So, I would ask my roommate Mark Sarmento about it and he explained it to me.

So, I told Dan that someone had just been smoking marijuana somewhere right there. It would have definitely been a dumb thing to do. Eventually Dan and the other operator (I can’t remember who) left the switchgear to continue on with their switching. So I returned to the rack where the ladders were.

As I stood there alone I realized that the aroma was pouring down from on top of the battery rooms. So I yelled out, “Hey! You better stop that right now! Don’t you know that the smoke is coming right down here in the switchgear?!?! Put that out and come on down from there!” I stood there for a few minutes and then I walked back into the electric shop.

I laid my parts on the workbench where I was repairing something, and then I walked back over to where I could look through the window in the door into the main switchgear. I finally saw someone climb down one of the ladders from the top of the battery rooms. So, I confronted him.

Yep. It was Gene Roget. I had been working with him for a year and a half at this time and I considered him a very good friend. I told him, “Gene! How could you do that? You know if they catch you they will fire you right away. No questions asked!” He said he was sorry, he didn’t think about the smell coming down into the switchgear and he would make sure it never happened again. I told him that he was lucky that I had found him and not Dan Landes. Dan’s nickname was Deputy Dan. He was a deputy in Perry, Oklahoma.

Well. as it turned out a few weeks later, Gene Roget was let go. I hadn’t told a soul about our encounter, but I wondered if he thought I had. Later I found out that he was let go so suddenly because he had confronted Leroy Godfrey about how Craig Jones had been fired because he had done something wrong. He didn’t know all the details about the snitch, but he did know that they said he was part of a (non-existent) Drug and Theft Ring.

No one tells Leroy Godfrey how to do his job, and in this case, Leroy had nothing to do with it. As a matter of fact, Leroy’s best buddy Jim Stevenson had been unjustly fingered by the snitch just because he was Leroy’s friend. So, Leroy had Gene Roget fired. I barely had time to say goodbye to Gene as he was led out the door to the parking lot and escorted out the gate by the highway patrolman who doubled as a security guard.

One time a year later, when I was carpooling with Art Hammond once again, I talked to Arthur about that day in the switchgear. I knew he was best friends with Gene Roget. So I told him about that instance. He told me that Gene had told him the whole story on the way home that day. Gene had just about had a heart attack when I had yelled up there for him to come down. He had swore to Arthur that he was never going to be that stupid again.

I made it clear to Arthur that I hadn’t told a soul about that day. And up until now, I still hadn’t. That was when Art explained to me the real reason that Gene had been fired. That made total sense. I knew how Leroy Godfrey was. He was an “old school” Power Plant Supervisor.

This is where the short story of the Hatchet Man comes up. He was another contract electrician. I think he was hired to help Jim Stevenson and Bill Ennis with the freeze protection. They were preparing for the coming winter and they needed a little extra help. I call this guy the “Hatchet Man” not because he was a hatchet man for the “Tong”, but because the only tool he used was a hatchet.

A Detective holding aTong War Hatchet

A Detective holding a Tong War Hatchet

He didn’t have a tool bucket. He just used this one tool. A Hatchet. As it turned out, he was missing two fingers on one hand and three fingers on the other hand. Hmmm… what came first? I wondered… the hatchet or the lost fingers? It seemed comical that a person missing half of all his fingers used only a hatchet as his only tool as an electrician. — how would he screw in a screw? Electricians had to work with screws all the time. Maybe he had a pocket knife for that.

I figured he probably lost his fingers working in the oil fields, since a lot of people lost fingers doing that. This guy definitely didn’t look much like a rodeo rider, which was the other group of people that would lose fingers.

One day, while sitting in the electrical lab during break time or lunch the subject of an upcoming job opening in the shop came up. The Hatchet Man made the mistake of saying that since he was handicapped, they had to give him the job. All he had to do was apply. They couldn’t turn him down. His missing fingers was his ticket.

Well. It didn’t take long before word of this conversation made its way up to the one good ear that Leroy Godfrey used to hear. The other one was out of commission. As I mentioned before. No one told Leroy what to do. He was supreme leader of the electric shop domain. By the end of the day, the Hatchet Man was given the Ax.

Ted Riddle was hired instead. Now you know the rest of the story.

Advertisements

New Home in the Power Plant Electric Shop

Originally Posted January 4, 2013:

November 7, 1983 I walked into the electric shop from the Power Plant Parking Lot with Bill Rivers. Bill was an electrician that I had been carpooling with off and on for almost a year. I remember walking in the door and the first thing I noticed were two guys leaning against the counter by the coffee pot that I hadn’t seen before. They looked like a couple of Electrical Contract hands.

When I came in the door, Bill told them that I was the new electrician. They both looked very surprised. The tall one told me that his name was Art Hammond and that this was his first day as an electrician in the shop also. He had just been hired. The shorter guy introduced himself as Gene Roget (it is a French name pronounced “Row jay” with a soft J). I could tell by his shock and look of disappointment at my young appearance and obvious lack of experience that he had been expecting to be hired permanently along with Arthur.

My new foreman was Charles Foster, the person that had asked me to think about becoming an electrician in the first place. Charles was a calm mild mannered person that made it clear to me the first day that I could call him Charles, or Foster or even Chuck, but don’t call him Charlie. Ok. I made a note of that in my mind….. When the need arises to really irritate Charles, I should remember to call him Charlie. — Just a side note… That need never did arise. I did think it was funny that I had referred to my previous foreman Larry Riley as my Foster Father, and now I actually had a Foster for a Foreman. The electric shop had a short Monday Morning Safety Meeting and then I officially began my 18 year career as an electrician.

I could go on and on about how Charles Foster and I became the best of friends. I could fill up post after post of the things we did and the hundreds of conversations we had each day at lunch…. and um…. I suppose I will in good time. Today I just want to focus on what we did the first day. The first thing Charles told me after making it clear that “Charlie” was not the way to address him, was to tell me that he believed that the way I would become a good electrician was for him to not tell me much about how he would do something, but instead, he would let me figure it out myself. And if I made a mistake. That was all right. I would learn from it.

I really hated making mistakes, and I wished at the time that he would let me follow him around telling me his electrical wisdom. Finally, in my mind I thought, “Ok. If Charles didn’t mind my making mistakes, then I will try not to mind it either.” It was hard at first, but eventually, I found that making mistakes was the highlight of my day sometimes… Sometimes not… I’m sure I will talk a lot about those in the coming months.

I followed Charles up to Bill Bennett’s office. He was our A foreman, and there was a cabinet in his office where he kept all the new electrician tools. I was given a used black five gallon bucket and a tool pouch to carry my tools. Like my first day as a summer help, I had to learn the name of a lot of new tools that day. There were crimpers, side cutters, Lineman’s Pliers, strippers and Holding Screwdrivers. I was given a special electrician pocket knife and was told that I would have to keep it very sharp. I had all sizes of screwdrivers and nut drivers. I put all the tools including the tool pouch into the black plastic bucket.

A black tool bucket like this

A black tool bucket like this

Bill Bennett was a tall very thin black man. He was a heavy smoker. This showed on his face as he looked older than I thought he really was. He spoke with a gruff voice from years of smoking. He was a very likable person (like most Power Plant Men). He told me that they had tried really hard to get me in the electric shop because the two men in the corner offices really didn’t want me to move off of the labor crew. He explained that I owed my new career to Charles Foster who gallantly went to bat for me. I told him I was grateful.

I was also given a Pocket Protector and a pair of small screwdrivers (one a philips screw driver). Charles explained that I would probably use these small screwdrivers more than any of the other tools. I also was given a small notebook and a pen. All of this went into my pocket protector. Which went into the vest pocket on my flannel shirt.

Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these

Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these

We went back down to the electric shop and Charles introduced me to Gene Roget again and Charles asked Gene if he would help me organize my tools and teach me some of the basics around being an electrician. Gene said that the first thing I needed to do was to lubricate my new tools. It just doesn’t do to have tools that are stiff. So, we worked on lubricating them and we even went down to the machine shop to get some abrasive paste that we worked into the tools to loosen them up. Gene took his side cutters and threw them up in the air and as they flew up, they rapidly opened and closed making a rattling sound. He caught them as they came down as if they were tied on his hand like a YoYo.

Wire Cutters similar to what I had

Wire Cutters similar to what I had

I worked the tools back and forth. Lubricating them and rubbing the abrasive paste in the joint. I had no coordination, so when I would try throwing my pliers in the air like Gene did, they would end up on the other end of the workbench, or across the room. So, I didn’t try it too often when others were around where I might injure someone. I thought. I’ll work on that more when I’m alone or just Gene is around. He had good reflexes and was able to quickly dodge my miss-thrown tools.

After Lunch Charles said that we had a job up at the coalyard that we needed to work on. He told me to grab my tool bucket and the multimeter from the cabinet. The electricians referred to it as the “Simpson”.

We had a couple of these Simpson Analog Multimeters in the shop

We had a couple of these Simpson Analog Multimeters in the shop

This was before each of us were issued our very own digital Fluke Mulimeter a few years later. I’m sure the old electricians are chuckling to remember that we used to use these old Multimeters. Charles explained to me that when you are checking voltage with the meter, that after you turn the dial to check voltage, always touch the two leads together to make sure the meter doesn’t move before touching the electric wires. This is done because if something happens that causes the meter to still be on “Resistance”, then when you check the voltage, the meter or the leads could explode possibly causing an injury. I had observed the electricians in the shop doing this back when I was a janitor, and now I knew why.

Charles explained that we needed to find out why the heater in the small pump room on the northwest corner of the dumper wasn’t running. So, we went to coalyard and found the space heater mounted along the wall. We tested it to make sure it wasn’t running. After checking the circuits with the multimeter on a panel on the wall, we found that we needed to replace a small fuse block because it had become corroded from all the coal dust and moisture.

I had seen electrical he-men go up to a panel and hold a screwdriver in their hand out at arms length and unscrew screws rapidly, one at a time. Bill Rivers had been doing that up on the precipitator roof when I was working with him while I was still on the Labor Crew. He could unscrew screws from a terminal block faster than I could unwrap Hershey Kisses.

So, when Charles told me to remove the fuse block from the panel, I thought this would be an easy task. I pulled out a screwdriver from my handy dandy tool bucket and with one hand holding the screwdriver, and the other hand steadying it by holding onto the stem of the screwdriver I moved toward the panel. Charles stopped me by saying something like: “Rule number one. Never use two hands. Especially when you are working on something hot.” Ok. I see.. If one hand is touching the metal screwdriver, and I come into contact with the screw which is electrified, then… um… yeah. Ok. I dropped one hand to my side and proceeded to remove the fuse block. That other hand remained at my side for the next 18 years when working on something hot (something is hot when it has the electricity turned on).

I explained above that I was pretty uncoordinated when it came to flipping my side cutters up into the air trying to act impressive like I knew what I was doing. Well. I couldn’t hold a screwdriver steady for the life of me. I tried to match up the head of the screwdriver with the slot in the screw, but I was pretty wobbly. It was kind of embarrassing. The truth had come out. This guy can’t even hold a screwdriver still. How is he ever going to become a real electrician?

A small fuse block like this.

A small fuse block like this.

Using all my concentration, I fumbled about and began working the screw out of the fuse block, when suddenly the screwdriver slipped slightly and Pow! Sparks flew. I had shorted the screwdriver between the screw and the hot post on the fuse block. There was a quick flash of light and a loud pop. Geez. The first time I’m working on something, what do I do? I blew it….. literally.

Well. Charles pointed out. The electricity is off now. Go ahead and change out the fuse block, then we will find out where the source of power is for it. So, I changed it out…. Feeling a little down that my new screwdriver now had a neat little notch on the blade where the electricity had melted off a corner of my screwdriver (I carried that notched screwdriver around for the next 10 years before I replaced it).  We found the breaker that had been tripped in a DP Panel (which stands for Distribution Panel) in the Dumper Air Handler room and turned it back on. We checked the heater and it was working.

At the end of the day, when Bill Bennett came down to the shop to see how my first day went, Charles told him that I had jumped right into it and already had a notch in my screwdriver to prove it. Both Bill and Charles were good-natured about it. I filled out my timecard which told a short story about my first adventure as an electrician.

As I walked to the parking lot with Bill Rivers to go home, I was thinking that even though I had been full of nerves all day, this had to be one of the most exciting days of my life. I was actually one of the electricians now. I had the feeling that somehow something was going to happen and they were going to tell me that they made a mistake and that I would have to go back to the labor crew. That was a feeling that haunted me for about 3 months after moving to the electric shop.

 

Comments from the original post:

  1. Ron Kilman January 5, 2013
    Your memory still amazes me. It’s like you kept a copy of every day’s time card. I’ll bet your time cards take up a whole room at Sooner!

    Great article. I still have some of the tools I was given on my first day in the Results Dept. at the Horseshoe Lake Plant in June, 1970 (don’t tell the Evil Plant Manager).

  2. NEO January 5, 2013

    I’ve got a few screwdrivers like that myself. Goes with the territory. Good post :-)

    Coments from previous repost:

      1. Jonathan Caswell January 9, 2014

        MY BROTHER NATE GOT MY DAD’S TOOLBOX—WITH ALL THE INERESTING STUFF IN IT.

    1. justturnright January 10, 2014

      Classic:
      “The first time I’m working on something, what do I do? I blew it….. literally.”
      I really DO need to stop by here more often.
      Great writing, partner. As always…

      Your “Spider” post is still my favorite, but this one was awfully good.

Power Plant Cajun and the Hatchet Man

Originally Posted August 30, 2013:

During the 18 years I worked as an electrician at the coal-fired Power Plant in North Central Oklahoma, we often had contractors working from our shop. I have mentioned that from the moment that I first entered the electric shop the first day I was an electrician, one of the first two people I met was a contract electrician. (See the post: “New Home in the Power Plant Electric Shop“).

Gene Roget (pronounced, “Row Jay” with a soft J) was originally from Louisiana.

A Cajun I found on Google Images that slightly resembles Gene Roget

A Cajun I found on Google Images (this is actually the actor Shia Lebeouf) that slightly resembles Gene Roget

Gene had spent the first 10 to 12 years of his adult life as a construction electrician. Charles Foster told him to be my mentor. At first Gene was shocked to find out that instead of hiring him to be a Plant Electrician along with his best buddy, Arthur Hammond, they had hired a young kid who didn’t know squat about being a real Power Plant Electrician. Yeah…. that was me.

I felt sorry for Gene because he obviously was the better candidate. The only saving grace for my mind was the knowledge that I was hired through the internal job program and that if they hadn’t taken me into the electric shop, they were going to be stuck with Charles Peavler. Charles was… well… he was somewhat older, but, well….. he couldn’t get around the fact that no matter what he did, he was always still Charles Peavler.

The day I entered the electric shop, I was 23 years and about 3 weeks old. Charles Peavler was 43. However, Charles might remind you of someone more around the age of 65. Not because he looked quite that old. He looked more like, well… um….. I guess he did look like he was about 65. I couldn’t tell if it was just the way he walked or stood, or the way his lip curled around the wad of skoal between his front lower lip and gums.

Just a pinch between your cheek and gums.... Never tried it myself.

Just a pinch between your cheek and gums…. Never tried it myself.

I know… I’m being a little hard on Charles. I just like to tease him. I could be worse. I could tell you that his first name was really Amos. But I wouldn’t stoop that low. That would be like saying that Andy Tubb’s first name is really Carl, only worse, so I won’t go there. Actually, Peavler looks more like an Amos than a Charles. (Oh. That paragraph was about Amos and Andy!).

Anyway, by hiring me instead of Charles Peavler off of the labor crew I figured that even though I was dumb as dirt as far as being an electrician, I was more apt to learn new things than Charles. So in the long run I was probably the better candidate. Gene Roget wouldn’t have been able to be hired even if they hadn’t chosen me.

There were two openings for electrician when I was hired. Arthur Hammond (Art) was able to be hired by the electric shop was because they convinced the higher-ups that they needed someone with a background in electronics and there weren’t any internal candidates that fit that bill. So Charles Foster, the foreman, made the case that they needed an experienced electrician with electronics background and they needed someone dumb as dirt, but able to learn something more than just how to lace up their steel-toed boot. — That was where I came in.

I figured that Gene Roget would hold a grudge against me for taking the job that he wanted. This is where the true quality of a person may shine through. When you are involved in making someone upset, even though it wasn’t your decision to make, the way a person reacts to you will tell you a lot about that person’s character.

When Charles Foster told Gene Roget to be my mentor and show me the ropes to being an electrician I suspected that I was being setup for failure. “Ok…” I thought, “I’ll watch what he does instead of what he tells me…” I’ll also watch my back to make sure I don’t end up being electrocuted or knocked off of a ledge or some other accident that would create a new opening in the electric shop.

As it turned out Gene Roget was a man of great quality. Not once in the year and a half that I worked with him did I ever have the feeling that Gene wasn’t doing his best to teach me the skills of being the best electrician I could be. It also turned out that Gene was not only eager to teach me, but he was a highly skilled electrician. So, I felt like I was being taught by one of the best.

Gene Roget (I always liked calling him Gene Roget instead of just Gene… I’m not sure why, but I suppose I can blame it on Gene Day. I never could just call him Gene. And Gene Day and Gene Roget rhymed), carpooled with Art Hammond (I always liked calling Art, Arthur, but I’ll call him Art in this post just to make it shorter… except that I just used all these words explaining it that now it’s longer).

Gene and Art were like best buddies. I carpooled with them a couple of times when I had to catch a ride because I had to stay late and my carpooling ride had to leave (that would have been Rich Litzer, Yvonne Taylor and Bill Rivers). During the drive home, I came to learn that Art and Gene had worked with each other on construction jobs for quite a while and their families were close in some ways.

I also learned that there was another activity that they did together that was not all together kosher (I don’t mean in a Jewish way). They asked me on the way into Stillwater one day if I wanted to take a “hit” on the small rolled cigarette they were taking turns taking tokes from. I had spent 4 years prior to this time in college in a dorm where smoking marijuana was more common than cigarettes and the idea didn’t phase me.

I declined, because I had no desire to go down that route. I told them that I wished that they didn’t do that while I was in the car because then my clothes would smell like I had been living in the dorm again, where your clothes were going to smell like that just going from your room to the elevator… At least it was that way my second year in college.

I’m only talking about this now because it was 29 years ago, and by now if Gene Roget wanted to set his grandchildren on his knee and tell them about the times he was a younger construction electrician, he can mention that he had a shady past at one point, but now he’s just a kind old man. So, I’m going to go on with a story that up to now I have only shared with Arthur Hammond.

One day I went into the main switchgear to find some parts in the parts cage behind the electric shop. When I went back there, an operator Dan Landes was in the switchgear with another operator. They were looking for something by the ladders, so I walked over to see if I could help. Maybe they needed the key to unlock the ladders, I thought.

I don’t remember what they wanted, but I do remember that when I walked up to them I immediately smelled the aroma of marijuana being smoked somewhere. We had just recently lost an electrician in our shop when the snitch tricked him into trading some marijuana for a supposedly stolen knife set (see the post “Power Plant Snitch“).

I asked Dan if he smelled that smell. It was pretty strong. I told him that was marijuana, and I could tell him what type it was. You see, even though I had never smoked the stuff, the drug dealer for the entire dorm used to share the bathroom with our room, and three nights each week he held parties in his room. He had high quality stuff and low. There was a definite difference in the smell. So, I would ask my roommate Mark Sarmento about it and he explained it to me.

So, I told Dan that someone had just been smoking marijuana somewhere right there. It would have definitely been a dumb thing to do. Eventually Dan and the other operator (I can’t remember who) left the switchgear to continue on with their switching. So I returned to the rack where the ladders were.

As I stood there alone I realized that the aroma was pouring down from on top of the battery rooms. So I yelled out, “Hey! You better stop that right now! Don’t you know that the smoke is coming right down here in the switchgear?!?! Put that out and come on down from there!” I stood there for a few minutes and then I walked back into the electric shop.

I laid my parts on the workbench where I was repairing something, and then I walked back over to where I could look through the window in the door into the main switchgear. I finally saw someone climb down one of the ladders from the top of the battery rooms. So, I confronted him.

Yep. It was Gene Roget. I had been working with him for a year and a half at this time and I considered him a very good friend. I told him, “Gene! How could you do that? You know if they catch you they will fire you right away. No questions asked!” He said he was sorry, he didn’t think about the smell coming down into the switchgear and he would make sure it never happened again. I told him that he was lucky that I had found him and not Dan Landes. Dan’s nickname was Deputy Dan. He was a deputy in Perry, Oklahoma.

Well. as it turned out a few weeks later, Gene Roget was let go. I hadn’t told a soul about our encounter, but I wondered if he thought I had. Later I found out that he was let go so suddenly because he had confronted Leroy Godfrey about how Craig Jones had been fired because he had done something wrong. He didn’t know all the details about the snitch, but he did know that they said he was part of a (non-existent) Drug and Theft Ring.

No one tells Leroy Godfrey how to do his job, and in this case, Leroy had nothing to do with it. As a matter of fact, Leroy’s best buddy Jim Stevenson had been unjustly fingered by the snitch just because he was Leroy’s friend. So, Leroy had Gene Roget fired. I barely had time to say goodbye to Gene as he was led out the door to the parking lot and escorted out the gate by the highway patrolman who doubled as a security guard.

One time a year later, when I was carpooling with Art Hammond once again, I talked to Arthur about that day in the switchgear. I knew he was best friends with Gene Roget. So I told him about that instance. He told me that Gene had told him the whole story on the way home that day. Gene had just about had a heart attack when I had yelled up there for him to come down. He had swore to Arthur that he was never going to be that stupid again.

I made it clear to Arthur that I hadn’t told a soul about that day. And up until now, I still hadn’t. That was when Art explained to me the real reason that Gene had been fired. That made total sense. I knew how Leroy Godfrey was. He was an “old school” Power Plant Supervisor.

This is where the short story of the Hatchet Man comes up. He was another contract electrician. I think he was hired to help Jim Stevenson and Bill Ennis with the freeze protection. They were preparing for the coming winter and they needed a little extra help. I call this guy the “Hatchet Man” not because he was a hatchet man for the “Tong”, but because the only tool he used was a hatchet.

A Detective holding aTong War Hatchet

A Detective holding a Tong War Hatchet

He didn’t have a tool bucket. He just used this one tool. A Hatchet. As it turned out, he was missing two fingers on one hand and three fingers on the other hand. Hmmm… what came first? I wondered… the hatchet or the lost fingers? It seemed comical that a person missing half of all his fingers used only a hatchet as his only tool as an electrician. — how would he screw in a screw? Electricians had to work with screws all the time. Maybe he had a pocket knife for that.

I figured he probably lost his fingers working in the oil fields, since a lot of people lost fingers doing that. This guy definitely didn’t look much like a rodeo rider, which was the other group of people that would lose fingers.

One day, while sitting in the electrical lab during break time or lunch the subject of an upcoming job opening in the shop came up. The Hatchet Man made the mistake of saying that since he was handicapped, they had to give him the job. All he had to do was apply. They couldn’t turn him down. His missing fingers was his ticket.

Well. It didn’t take long before word of this conversation made its way up to the one good ear that Leroy Godfrey used to hear. The other one was out of commission. As I mentioned before. No one told Leroy what to do. He was supreme leader of the electric shop domain. By the end of the day, the Hatchet Man was given the Ax.

Ted Riddle was hired instead. Now you know the rest of the story.

Power Plant Cajun and the Hatchet Man

Originally Posted August 30, 2013:

During the 18 years I worked as an electrician at the coal-fired Power Plant in North Central Oklahoma, we often had contractors working from our shop. I have mentioned that from the moment that I first entered the electric shop the first day I was an electrician, one of the first two people I met was a contract electrician. (See the post: “New Home in the Power Plant Electric Shop“).

Gene Roget (pronounced, “Row Jay” with a soft J) was originally from Louisiana.

A Cajun I found on Google Images that slightly resembles Gene Roget

A Cajun I found on Google Images (this is actually the actor Shia Lebeouf) that slightly resembles Gene Roget

Gene had spent the first 10 to 12 years of his adult life as a construction electrician. Charles Foster told him to be my mentor. At first Gene was shocked to find out that instead of hiring him to be a Plant Electrician along with his best buddy, Arthur Hammond, they had hired a young kid who didn’t know squat about being a real Power Plant Electrician. Yeah…. that was me.

I felt sorry for Gene because he obviously was the better candidate. The only saving grace for my mind was the knowledge that I was hired through the internal job program and that if they hadn’t taken me into the electric shop, they were going to be stuck with Charles Peavler. Charles was… well… he was somewhat older, but, well….. he couldn’t get around the fact that no matter what he did, he was always still Charles Peavler.

The day I entered the electric shop, I was 23 years and about 3 weeks old. Charles Peavler was 43. However, Charles might remind you of someone more around the age of 65. Not because he looked quite that old. He looked more like, well… um….. I guess he did look like he was about 65. I couldn’t tell if it was just the way he walked or stood, or the way his lip curled around the wad of skoal between his front lower lip and gums.

Just a pinch between your cheek and gums.... Never tried it myself.

Just a pinch between your cheek and gums…. Never tried it myself.

I know… I’m being a little hard on Charles. I just like to tease him. I could be worse. I could tell you that his first name was really Amos. But I wouldn’t stoop that low. That would be like saying that Andy Tubb’s first name is really Carl, only worse, so I won’t go there. Actually, Peavler looks more like an Amos than a Charles. (Oh. That paragraph was about Amos and Andy!).

Anyway, by hiring me instead of Charles Peavler off of the labor crew I figured that even though I was dumb as dirt as far as being an electrician, I was more apt to learn new things than Charles. So in the long run I was probably the better candidate. Gene Roget wouldn’t have been able to be hired even if they hadn’t chosen me.

There were two openings for electrician when I was hired. Arthur Hammond (Art) was able to be hired by the electric shop was because they convinced the higher-ups that they needed someone with a background in electronics and there weren’t any internal candidates that fit that bill. So Charles Foster, the foreman, made the case that they needed an experienced electrician with electronics background and they needed someone dumb as dirt, but able to learn something more than just how to lace up their steel-toed boot. — That was where I came in.

I figured that Gene Roget would hold a grudge against me for taking the job that he wanted. This is where the true quality of a person may peer through. When you are involved in making someone upset, even though it wasn’t your decision to make, the way a person reacts to you will tell you a lot about that person’s character.

When Charles Foster told Gene Roget to be my mentor and show me the ropes to being an electrician I suspected that I was being setup for failure. “Ok…” I thought, “I’ll watch what he does instead of what he tells me…” I’ll also watch my back to make sure I don’t end up being electrocuted or knocked off of a ledge or some other accident that would create a new opening in the electric shop.

As it turned out Gene Roget was a man of great quality. Not once in the year and a half that I worked with him did I ever have the feeling that Gene wasn’t doing his best to teach me the skills of being the best electrician I could be. It also turned out that Gene was not only eager to teach me, but he was a highly skilled electrician. So, I felt like I was being taught by one of the best.

Gene Roget (I always liked calling him Gene Roget instead of just Gene… I’m not sure why, but I suppose I can blame it on Gene Day. I never could just call him Gene. And Gene Day and Gene Roget rhymed), carpooled with Art Hammond (I always liked calling Art, Arthur, but I’ll call him Art in this post just to make it shorter… except that I just used all these words explaining it that now it’s longer).

Gene and Art were like best buddies. I carpooled with them a couple of times when I had to catch a ride because I had to stay late and my carpooling ride had to leave (that would have been Rich Litzer, Yvonne Taylor and Bill Rivers). During the drive home, I came to learn that Art and Gene had worked with each other on construction jobs for quite a while and their families were close in some ways.

I also learned that there was another activity that they did together that was not all together kosher (I don’t mean in a Jewish way). They asked me on the way into Stillwater one day if I wanted to take a “hit” on the small rolled cigarette they were taking turns taking tokes from. I had spent 4 years prior to this time in college in a dorm where smoking marijuana was more common than cigarettes and the idea didn’t phase me.

I declined, because I had no desire to go down that route. I told them that I wished that they didn’t do that while I was in the car because then my clothes would smell like I had been living in the dorm again, where your clothes were going to smell like that just going from your room to the elevator… At least it was that way my second year in college.

I’m only talking about this now because it was 29 years ago, and by now if Gene Roget wanted to set his grandchildren on his knee and tell them about the times he was a younger construction electrician, he can mention that he had a shady past at one point, but now he’s just a kind old man. So, I’m going to go on with a story that up to now I have only shared with Arthur Hammond.

One day I went into the main switchgear to find some parts in the parts cage behind the electric shop. When I went back there, an operator Dan Landes was in the switchgear with another operator. They were looking for something by the ladders, so I walked over to see if I could help. Maybe they needed the key to unlock the ladders, I thought.

I don’t remember what they wanted, but I do remember that when I walked up to them I immediately smelled the aroma of marijuana being smoked somewhere. We had just recently lost an electrician in our shop when the snitch tricked him into trading some marijuana for a supposedly stolen knife set (see the post “Power Plant Snitch“).

I asked Dan if he smelled that smell. It was pretty strong. I told him that was marijuana, and I could tell him what type it was. You see, even though I had never smoked the stuff, the drug dealer for the entire dorm used to share the bathroom with our room, and three nights each week he held parties in his room. He had high quality stuff and low. There was a definite difference in the smell. So, I would ask my roommate Mark Sarmento about it and he explained it to me.

So, I told Dan that someone had just been smoking marijuana somewhere right there. It would have definitely been a dumb thing to do. Eventually Dan and the other operator (I can’t remember who) left the switchgear to continue on their with their switching. So I returned to the rack where the ladders were.

As I stood there alone I realized that the aroma was pouring down from on top of the battery rooms. So I yelled out, “Hey! You better stop that right now! Don’t you know that the smoke is coming right down here in the switchgear?!?! Put that out and come on down from there!” I stood there for a few minutes and then I walked back into the electric shop.

I laid my parts on the workbench where I was repairing something, and then I walked back over to where I look through the window in the door into the main switchgear. I finally saw someone climb down one of the ladders from the top of the battery rooms. So, I confronted him.

Yep. It was Gene Roget. I had been working with him for a year and a half at this time and I considered him a very good friend. I told him, “Gene! How could you do that? You know if they catch you they will fire you right away. No questions asked!” He said he was sorry, he didn’t think about the smell coming down into the switchgear and he would make sure it never happened again. I told him that he was lucky that I had found him and not Dan Landes. Dan’s nickname was Deputy Dan. He was a deputy in Perry, Oklahoma.

Well. as it turned out a few weeks later, Gene Roget was let go. I hadn’t told a soul about our encounter, but I wondered if he thought I had. Later I found out that he was let go so suddenly because he had confronted Leroy Godfrey about how Craig Jones had been fired because he had done something wrong. He didn’t know all the details about the snitch, but he did know that they said he was part of a (non-existent) Drug and Theft Ring.

No one tells Leroy Godfrey how to do his job, and in this case, Leroy had nothing to do with it. As a matter of fact, Leroy’s best buddy Jim Stevenson had been unjustly fingered by the snitch just because he was Leroy’s friend. So, Leroy had Gene Roget fired. I barely had time to say goodbye to Gene as he was led out the door to the parking lot and escorted out the gate by the highway patrolman who doubled as a security guard.

One time a year later, when I was carpooling with Art Hammond once again, I talked to Arthur about that day in the switchgear. I knew he was best friends with Gene Roget. So I told him about that instance. He told me that Gene had told him the whole story on the way home that day. Gene had just about had a heart attack when I had yelled up there for him to come down. He had swore to Arthur that he was never going to be that stupid again.

I made it clear to Arthur that I hadn’t told a soul about that day. And up until now, I still hadn’t. That was when Art explained to me the real reason that Gene had been fired. That made total sense. I knew how Leroy Godfrey was. He was an “old school” Power Plant Supervisor.

This is where the short story of the Hatchet Man comes up. He was another contract electrician. I think he was hired to help Jim Stevenson and Bill Ennis with the freeze protection. They were preparing for the coming winter and they needed a little extra help. I call this guy the “Hatchet Man” not because he was a hatchet man for the “Tong”, but because the only tool he used was a hatchet.

A Detective holding aTong War Hatchet

A Detective holding a Tong War Hatchet

He didn’t have a tool bucket. He just used this one tool. A Hatchet. As it turned out, he was missing two fingers on one hand and three fingers on the other hand. Hmmm… what came first? I wondered… the hatchet or the lost fingers? It seemed comical that a person missing half of all his fingers used only a hatchet as his only tool as an electrician. — how would he screw in a screw? Electricians had to work with screws all the time. Maybe he had a pocket knife for that.

I figured he probably lost his fingers working in the oil fields, since a lot of people lost fingers doing that. This guy definitely didn’t look much like a rodeo rider, which was the other group of people that would lose fingers.

One day, while sitting in the electrical lab during break time or lunch the subject of an upcoming job opening in the shop came up. The Hatchet Man made the mistake of saying that since he was handicapped, they had to give him the job. All he had to do was apply. They couldn’t turn him down. His missing fingers was his ticket.

Well. It didn’t take long before word of this conversation made its way up to the one ear that Leroy Godfrey used to hear. The other one was out of commission. As I mentioned before. No one told Leroy what to do. He was supreme leader of the electric shop domain. By the end of the day, the Hatchet Man was given the Ax.

Ted Riddle was hired instead. Now you know the rest of the story.

New Home in the Power Plant Electric Shop

Originally Posted January 4, 2013:

November 7, 1983 I walked into the electric shop from the Power Plant Parking Lot with Bill Rivers. Bill was an electrician that I had been carpooling with off and on for almost a year. I remember walking in the door and the first thing I noticed were two guys leaning against the counter by the coffee pot that I hadn’t seen before. They looked like a couple of Electrical Contract hands.

When I came in the door, Bill told them that I was the new electrician. They both looked very surprised. The tall one told me that his name was Art Hammond and that this was his first day as an electrician in the shop also. He had just been hired. The shorter guy introduced himself as Gene Roget (it is a French name pronounced “Row jay” with a soft J). I could tell by his shock and look of disappointment at my young appearance and obvious lack of experience that he had been expecting to be hired permanently along with Arthur.

My new foreman was Charles Foster, the person that had asked me to think about becoming an electrician in the first place. Charles was a calm mild mannered person that made it clear to me the first day that I could call him Charles, or Foster or even Chuck, but don’t call him Charlie. Ok. I made a note of that in my mind….. When the need arises to really irritate Charles, I should remember to call him Charlie. — Just a side note… That need never did arise. I did think it was funny that I had referred to my previous foreman Larry Riley as my Foster Father, and now I actually had a Foster for a Foreman. The electric shop had a short Monday Morning Safety Meeting and then I officially began my 18 year career as an electrician.

I could go on and on about how Charles Foster and I became the best of friends. I could fill up post after post of the things we did and the hundreds of conversations we had each day at lunch…. and um…. I suppose I will in good time. Today I just want to focus on what we did the first day. The first thing Charles told me after making it clear that “Charlie” was not the way to address him, was to tell me that he believed that the way I would become a good electrician was for him to not tell me much about how he would do something, but instead, he would let me figure it out myself. And if I made a mistake. That was all right. I would learn from it.

I really hated making mistakes, and I wished at the time that he would let me follow him around telling me his electrical wisdom. Finally, in my mind I thought, “Ok. If Charles didn’t mind my making mistakes, then I will try not to mind it either.” It was hard at first, but eventually, I found that making mistakes was the highlight of my day sometimes… Sometimes not… I’m sure I will talk a lot about those in the coming months.

I followed Charles up to Bill Bennett’s office. He was our A foreman, and there was a cabinet in his office where he kept all the new electrician tools. I was given a used black five gallon bucket and a tool pouch to carry my tools. Like my first day as a summer help, I had to learn the name of a lot of new tools that day. There were crimpers, side cutters, Lineman’s Pliers, strippers and Holding Screwdrivers. I was given a special electrician pocket knife and was told that I would have to keep it very sharp. I had all sizes of screwdrivers and nut drivers. I put all the tools including the tool pouch into the black plastic bucket.

A black tool bucket like this

A black tool bucket like this

Bill Bennett was a tall very thin black man. He was a heavy smoker. This showed on his face as he looked older than I thought he really was. He spoke with a gruff voice from years of smoking. He was a very likable person (like most Power Plant Men). He told me that they had tried really hard to get me in the electric shop because the two men in the corner offices really didn’t want me to move off of the labor crew. He explained that I owed my new career to Charles Foster who gallantly went to bat for me. I told him I was grateful.

I was also given a Pocket Protector and a pair of small screwdrivers (one a philips screw driver). Charles explained that I would probably use these small screwdrivers more than any of the other tools. I also was given a small notebook and a pen. All of this went into my pocket protector. Which went into the vest pocket on my flannel shirt.

Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these

Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these

We went back down to the electric shop and Charles introduced me to Gene Roget again and Charles asked Gene if he would help me organize my tools and teach me some of the basics around being an electrician. Gene said that the first thing I needed to do was to lubricate my new tools. It just doesn’t do to have tools that are stiff. So, we worked on lubricating them and we even went down to the machine shop to get some abrasive paste that we worked into the tools to loosen them up. Gene took his side cutters and threw them up in the air and as they flew up, they rapidly opened and closed making a rattling sound. He caught them as they came down as if they were tied on his hand like a YoYo.

Wire Cutters similar to what I had

Wire Cutters similar to what I had

I worked the tools back and forth. Lubricating them and rubbing the abrasive paste in the joint. I had no coordination, so when I would try throwing my pliers in the air like Gene did, they would end up on the other end of the workbench, or across the room. So, I didn’t try it too often when others were around where I might injure someone. I thought. I’ll work on that more when I’m alone or just Gene is around. He had good reflexes and was able to quickly dodge my miss-thrown tools.

After Lunch Charles said that we had a job up at the coalyard that we needed to work on. He told me to grab my tool bucket and the multimeter from the cabinet. The electricians referred to it as the “Simpson”.

We had a couple of these Simpson Analog Multimeters in the shop

We had a couple of these Simpson Analog Multimeters in the shop

This was before each of us were issued our very own digital Fluke Mulimeter a few years later. I’m sure the old electricians are chuckling to remember that we used to use these old Multimeters. Charles explained to me that when you are checking voltage with the meter, that after you turn the dial to check voltage, always touch the two leads together to make sure the meter doesn’t move before touching the electric wires. This is done because if something happens that causes the meter to still be on “Resistance”, then when you check the voltage, the meter or the leads could explode possibly causing an injury. I had observed the electricians in the shop doing this back when I was a janitor, and now I knew why.

Charles explained that we needed to find out why the heater in the small pump room on the northwest corner of the dumper wasn’t running. So, we went to coalyard and found the space heater mounted along the wall. We tested it to make sure it wasn’t running. After checking the circuits with the multimeter on a panel on the wall, we found that we needed to replace a small fuse block because it had become corroded from all the coal dust and moisture.

I had seen electrical he-men go up to a panel and hold a screwdriver in their hand out at arms length and unscrew screws rapidly, one at a time. Bill Rivers had been doing that up on the precipitator roof when I was working with him while I was still on the Labor Crew. He could unscrew screws from a terminal block faster than I could unwrap Hershey Kisses.

So, when Charles told me to remove the fuse block from the panel, I thought this would be an easy task. I pulled out a screwdriver from my handy dandy tool bucket and with one hand holding the screwdriver, and the other hand steadying it by holding onto the stem of the screwdriver I moved toward the panel. Charles stopped me by saying something like: “Rule number one. Never use two hands. Especially when you are working on something hot.” Ok. I see.. If one hand is touching the metal screwdriver, and I come into contact with the screw which is electrified, then… um… yeah. Ok. I dropped one hand to my side and proceeded to remove the fuse block. That other hand remained at my side for the next 18 years when working on something hot (something is hot when it has the electricity turned on).

I explained above that I was pretty uncoordinated when it came to flipping my side cutters up into the air trying to act impressive like I knew what I was doing. Well. I couldn’t hold a screwdriver steady for the life of me. I tried to match up the head of the screwdriver with the slot in the screw, but I was pretty wobbly. It was kind of embarrassing. The truth had come out. This guy can’t even hold a screwdriver still. How is he ever going to become a real electrician?

A small fuse block like this.

A small fuse block like this.

Using all my concentration, I fumbled about and began working the screw out of the fuse block, when suddenly the screwdriver slipped slightly and Pow! Sparks flew. I had shorted the screwdriver between the screw and the hot post on the fuse block. There was a quick flash of light and a loud pop. Geez. The first time I’m working on something, what do I do? I blew it….. literally.

Well. Charles pointed out. The electricity is off now. Go ahead and change out the fuse block, then we will find out where the source of power is for it. So, I changed it out…. Feeling a little down that my new screwdriver now had a neat little notch on the blade where the electricity had melted off a corner of my screwdriver. We found the breaker that had been tripped in a DP Panel (which stands for Distribution Panel) in the Dumper Air Handler room and turned it back on. We checked the heater and it was working.

At the end of the day, when Bill Bennett came down to the shop to see how my first day went, Charles told him that I had jumped right into it and already had a notch in my screwdriver to prove it. Both Bill and Charles were good-natured about it. I filled out my timecard which told a short story about my first adventure as an electrician.

As I walked to the parking lot with Bill Rivers to go home, I was thinking that even though I had been full of nerves all day, this had to be one of the most exciting days of my life. I was actually one of the electricians now. I had the feeling that somehow something was going to happen and they were going to tell me that they made a mistake and that I would have to go back to the labor crew. That was a feeling that haunted me for about 3 months after moving to the electric shop.

 

Comments from the original post:

  1. Ron Kilman January 5, 2013
    Your memory still amazes me. It’s like you kept a copy of every day’s time card. I’ll bet your time cards take up a whole room at Sooner!

    Great article. I still have some of the tools I was given on my first day in the Results Dept. at the Horseshoe Lake Plant in June, 1970 (don’t tell the Evil Plant Manager).

  2. NEO January 5, 2013

    I’ve got a few screwdrivers like that myself. Goes with the territory. Good post :-)

    Coments from previous repost:

    1. Jonathan Caswell January 9, 2014

      MY BROTHER NATE GOT MY DAD’S TOOLBOX—WITH ALL THE INERESTING STUFF IN IT.

    2. justturnright January 10, 2014

      Classic:
      “The first time I’m working on something, what do I do? I blew it….. literally.”
      I really DO need to stop by here more often.
      Great writing, partner. As always…

      Your “Spider” post is still my favorite, but this one was awfully good.

New Home in the Power Plant Electric Shop — Repost

Originally Posted January 4, 2013:

November 7, 1983 I walked into the electric shop from the Power Plant Parking Lot with Bill Rivers.  Bill was an electrician that I had been carpooling with off and on for almost a year.  I remember walking in the door and the first thing I noticed were two guys leaning against the counter by the coffee pot that I hadn’t seen before.  They looked like a couple of Electrical Contract hands.

When I came in the door, Bill told them that I was the new electrician.  They both looked very surprised.  The tall one told me that his name was Art Hammond and that this was his first day as an electrician in the shop also.  He had just been hired.  The shorter guy introduced himself as Gene Roget (it is a French name pronounced “Row jay” with a soft J).  I could tell by his shock and look of disappointment at my young appearance and obvious lack of experience that he had been expecting to be hired permanently along with Arthur.

My new foreman was Charles Foster, the person that had asked me to think about becoming an electrician in the first place.  Charles was a calm mild mannered person that made it clear to me the first day that I could call him Charles, or Foster or even Chuck, but don’t call him Charlie.  Ok.  I made a note of that in my mind….. When the need arises to really irritate Charles, I should remember to call him Charlie.  —  Just a side note…  That need never did arise.  I did think it was funny that I had referred to my previous foreman Larry Riley as my Foster Father, and now I actually had a Foster for a Foreman.  The electric shop had a short Monday Morning Safety Meeting and then I officially began my 18 year career as an electrician.

I could go on and on about how Charles Foster and I became the best of friends.  I could fill up post after post of the things we did and the hundreds of conversations we had each day at lunch…. and um…. I suppose I will in good time.  Today I just want to focus on what we did the first day.  The first thing Charles told me after making it clear that “Charlie” was not the way to address him, was to tell me that he believed that the way I would become a good electrician was for him to not tell me much about how he would do something, but instead, he would let me figure it out myself.  And if I made a mistake.  That was all right.  I would learn from it.

I really hated making mistakes, and I wished at the time that he would let me follow him around telling me his electrical wisdom.  Finally, in my mind I thought, “Ok.  If Charles didn’t mind my making mistakes, then I will try not to mind it either.”  It was hard at first, but eventually, I found that making mistakes was the highlight of my day sometimes…  Sometimes not…  I’m sure I will talk a lot about those in the coming months.

I followed Charles up to Bill Bennett’s office.  He was our A foreman, and there was a cabinet in his office where he kept all the new electrician tools.  I was given a used black five gallon bucket and a tool pouch to carry my tools.  Like my first day as a summer help, I had to learn the name of a lot of new tools that day.  There were crimpers, side cutters, Lineman’s Pliers, strippers and Holding Screwdrivers.  I was given a special electrician pocket knife and was told that I would have to keep it very sharp.  I had all sizes of screwdrivers and nut drivers.  I put all the tools including the tool pouch into the black plastic bucket.

A black tool bucket like this

A black tool bucket like this

Bill Bennett was a tall very thin black man.  He was a heavy smoker.  This showed on his face as he looked older than I thought he really was.  He spoke with a gruff voice from years of smoking.  He was a very likable person (like most Power Plant Men).  He told me that they had tried really hard to get me in the electric shop because the two men in the corner offices really didn’t want me to move off of the labor crew.  He explained that I owed my new career to Charles Foster who gallantly went to bat for me.  I told him I was grateful.

I was also given a Pocket Protector and a pair of small screwdrivers (one a philips screw driver).  Charles explained that I would probably use these small screwdrivers more than any of the other tools.  I also was given a small notebook and a pen.  All of this went into my pocket protector.  Which went into the vest pocket on my flannel shirt.

Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these

Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these

We went back down to the electric shop and Charles introduced me to Gene Roget again and Charles asked Gene if he would help me organize my tools and teach me some of the basics around being an electrician.  Gene said that the first thing I needed to do was to lubricate my new tools.  It just doesn’t do to have tools that are stiff.  So, we worked on lubricating them and we even went down to the machine shop to get some abrasive paste that we worked into the tools to loosen them up.  Gene took his side cutters and threw them up in the air and as they flew up, they rapidly opened and closed making a rattling sound.  He caught them as they came down as if they were tied on his hand like a YoYo.

Wire Cutters similar to what I had

Wire Cutters similar to what I had

I worked the tools back and forth.  Lubricating them and rubbing the abrasive paste in the joint.  I had no coordination, so when I would try throwing my pliers in the air like Gene did, they would end up on the other end of the workbench, or across the room.  So, I didn’t try it too often when others were around where I might injure someone.  I thought.  I’ll work on that more when I’m alone or just Gene is around.  He had good reflexes and was able to quickly dodge my miss-thrown tools.

After Lunch Charles said that we had a job up at the coalyard that we needed to work on.  He told me to grab my tool bucket and the multimeter from the cabinet.  The electricians referred to it as the “Simpson”.

We had a couple of these Simpson Analog Multimeters in the shop

We had a couple of these Simpson Analog Multimeters in the shop

This was before each of us were issued our very own digital Fluke Mulimeter a few years later.  I’m sure the old electricians are chuckling to remember that we used to use these old Multimeters.  Charles explained to me that when you are checking voltage with the meter, that after you turn the dial to check voltage, always touch the two leads together to make sure the meter doesn’t move before touching the electric wires.  This is done because if something happens that causes the meter to still be on “Resistance”, then when you check the voltage, the meter or the leads could explode possibly causing an injury.  I had observed the electricians in the shop doing this back when I was a janitor, and now I knew why.

Charles explained that we needed to find out why the heater in the small pump room on the northwest corner of the dumper wasn’t running.  So, we went to coalyard and found the space heater mounted along the wall.  We tested it to make sure it wasn’t running.  After checking the circuits with the multimeter on a panel on the wall, we found that we needed to replace a small fuse block because it had become corroded from all the coal dust and moisture.

I had seen electrical he-men go up to a panel and hold a screwdriver in their hand out at arms length and unscrew screws rapidly, one at a time.  Bill Rivers had been doing that up on the precipitator roof when I was working with him while I was still on the Labor Crew.  He could unscrew screws from a terminal block faster than I could unwrap Hershey Kisses.

So, when Charles told me to remove the fuse block from the panel, I thought this would be an easy task.  I pulled out a screwdriver from my handy dandy tool bucket and with one hand holding the screwdriver, and the other hand steadying it by holding onto the stem of the screwdriver I moved toward the panel.  Charles stopped me by saying something like:  “Rule number one.  Never use two hands.  Especially when you are working on something hot.”  Ok.  I see..  If one hand is touching the metal screwdriver, and I come into contact with the screw which is electrified, then… um… yeah. Ok.  I dropped one hand to my side and proceeded to remove the fuse block.  That other hand remained at my side for the next 18 years when working on something hot (something is hot when it has the electricity turned on).

I explained above that I was pretty uncoordinated when it came to flipping my side cutters up into the air trying to act impressive like I knew what I was doing.  Well.  I couldn’t hold a screwdriver steady for the life of me.  I tried to match up the head of the screwdriver with the slot in the screw, but I was pretty wobbly.  It was kind of embarrassing.  The truth had come out.  This guy can’t even hold a screwdriver still.  How is he ever going to become a real electrician?

A small fuse block like this.

A small fuse block like this.

Using all my concentration, I fumbled about and began working the screw out of the fuse block, when suddenly the screwdriver slipped slightly and Pow!  Sparks flew.  I had shorted the screwdriver between the screw and the hot post on the fuse block.  There was a quick flash of light and a loud pop.  Geez.  The first time I’m working on something, what do I do?  I blew it….. literally.

Well.  Charles pointed out.  The electricity is off now.  Go ahead and change out the fuse block, then we will find out where the source of power is for it.  So, I changed it out…. Feeling a little down that my new screwdriver now had a neat little notch on the blade where the electricity had melted off a corner of my screwdriver.  We found the breaker that had been tripped in a DP Panel (which stands for Distribution Panel) in the Dumper Air Handler room and turned it back on.  We checked the heater and it was working.

At the end of the day, when Bill Bennett came down to the shop to see how my first day went, Charles told him that I had jumped right into it and already had a notch in my screwdriver to prove it.  Both Bill and Charles were good-natured about it. I filled out my timecard which told a short story about my first adventure as an electrician.

As I walked to the parking lot with Bill Rivers to go home, I was thinking that even though I had been full of nerves all day, this had to be one of the most exciting days of my life.  I was actually one of the electricians now.  I had the feeling that somehow something was going to happen and they were going to tell me that they made a mistake and that I would have to go back to the labor crew.  That was a feeling that haunted me for about 3 months after moving to the electric shop.

 

Comments from the original post:

  1. Ron Kilman January 5, 2013

    Your memory still amazes me. It’s like you kept a copy of every day’s time card. I’ll bet your time cards take up a whole room at Sooner!

    Great article. I still have some of the tools I was given on my first day in the Results Dept. at the Horseshoe Lake Plant in June, 1970 (don’t tell the Evil Plant Manager).

  2. NEO January 5, 2013

    I’ve got a few screwdrivers like that myself. Goes with the territory. Good post :-)