Why Stanley Elmore and Other Power Plant Questions
Favorites Post #66
Originally posted September 7, 2012:
Why Stanley Elmore? I suppose that was on the mind of a few Power Plant Men when the foreman for the new Automotive Garage and Yard crew was chosen in 1980. What did Stanley have that the rest of the Power Plant Men lacked? Why did Stanley accept such a position in a power plant out in the middle of nowhere in the plains of Oklahoma? I have some thoughts about these questions and others that I will share with the rest of the Power Plant Kingdom.
When I returned to the Power Plant for my second summer as a summer help in 1980, I found that the Automotive Garage had been finished and a new crew had been assigned to work from this shop. Doug House, Jim Heflin, Larry Riley and Ken Conrad were there to welcome me. I had only known Larry from the year before and when he saw that I was returning, he actually said he was glad to see me. It was usually hard to tell what Larry was thinking because he kept a straight face even when he was chuckling under his breath. So, I never really knew what he thought about me until he told the others that he was glad that I would be working there this summer.
Then the new foreman walked in. He was a medium height stocky man that had obviously come from another plant and was well seasoned in the ways of Power Plant etiquette. This required him to act as if I had just walked into a snake pit and my summer was going to be a living Hell working under him. Of course I accepted this well knowing that this merely meant that he had a lot for us to do during the summer and I should enjoy myself.
There was another summer help there, David Foster. He had been hired because he had experience driving a Tractor, and he would spend a lot of the time that summer mowing grass. That is, until he wrecked a new brush hog while going perpendicular across a ditch at too high rate of speed.
Almost Like this without the safety guards and just about as new
(Boy, I’m getting a lot of mileage out of that one picture of a Brush Hog). At that point, he started working on watering the grass, as I did (and you can read about that in the post “When Power Plant Men Talk, It Pays to Listen“).
A short time after I had been there I realized that there was another resident of the garage. It was Don Pierce that came from Construction to operate the P&H Crane used by the Plant. Here is a Picture of the same kind of P&H Crane that Don Pierce operated for at least two of the summers that I was working out of the Garage.
A P&H Crane, just like the one at the plant
Don Pierce was a tall person with a moustache and tinted glasses. He was chewing something often that he spit into a cup or a Coke can, that made a squeaky squirty sound each time he spit. He always looked to me like he wore the same size jeans that he wore when he graduated from High School, even though the rest of him had filled out some. Making him look like his upper body had been squeezed some out of his jeans. Like Hank Hill in King of the Hill:
Don had too tight jeans like this only his belt buckle was much bigger
It didn’t take long to figure out that Stanley Elmore loved to play jokes on people. He would get the biggest laugh from causing someone a moment of confusion. He would shake his head and laugh and say, “oooooohhh weeee” (or something similar). I always had a bigger kick out of watching Stanley’s reaction to someone encountering his joke than I did from the joke itself. As you may have learned from an earlier post “Power Plant Painting Lessons with Aubrey Cargill“, that I was the target of at least some of his jokes. It would make me laugh to know that Stanley was playing a joke on me.
Actually, anytime during my time at the plant it made me laugh to find that someone was playing a joke on me. I remember while I was a janitor that one day while I was cleaning out the bathroom in the Electric Shop, I would first Sweep out the bathroom and then mop it. Many times I turned around to pick up something that was sitting just outside the door of the bathroom I found that it had moved.
Like the mop bucket had moved down to the door by the lab. Everyone in the shop was just doing their normal job. But when I walked out of the bathroom to find the handle missing from the push broom and Andy Tubbs and Ben Davis sitting at the break table acting like nothing was wrong, I had to walk back into the bathroom in order to keep them from seeing how hard I was laughing.
For some reason that was the funniest joke I encountered. To turn around in one moment and have the broom handle gone and the broom itself just sitting on the floor with no handle and the obvious culprit Andy Tubbs trying his best to keep a straight face and act like he wasn’t noticing anything. I still laugh when I think about it 30 years later.
Stanley’s jokes were of that caliber. When Don Pierce drove to work one day on his new Harley Davidson Motorcycle, Stanley just couldn’t resist. He started out by asking him if he noticed that it leaked oil. Don said it better not, because he just bought it brand new. Stanley answered by saying that Harley Davidsons always leaked oil.
A Harley Davidson similar to the one Don Pierce had
So, while Don was out operating the P&H Crane, Stanley took a small cup of oil and poured a little oil spot under his motorcycle, just as a reminder to Don that all Harleys in 1980 leaked oil. Then Stanley watched and waited for Don to stroll by his motorcycle in the parking lot during lunch to see what his reaction would be. Of course, Don had been an Electric Company Construction worker long enough to spot a snow job when he saw a grease spot. But it did make him smile to know that Stanley had gone through the trouble of putting an oil spot under his motorcycle. — That’s one way to know that someone really cares about you. They are willing to take the time out of their busy day to play a little power plant joke on you.
I was able to work one-on-one with Don Pierce for about a week that summer when we had to go to the laydown yard by the main gate and organize all the spare cable spools, rebar, piping, et cetera into neat rows and in some kind of order like from largest to smallest. In order to put the large reels of cable into neat rows, we would line up two rows of very large telephone poles close to each other, and then place the reels on the poles to keep them off of the ground so they would last longer, and not sink into the ground when it rained.
To give you an idea. Some of the wooden reels were taller than me
Don was operating the crane and I was doing my best to use the newly learned hand signals to direct him where to go and what to do. There was a hand signal for everything, and I was afraid that if I stopped to itch my nose, Don would cut the engine and leave for lunch.
I had been studying this chart during break before we went to the laydown yard
We were picking up wooden telephone poles and carefully placing them in a line, and I was standing there guiding the poles into place as they were lowered to the ground. At one point, I had signaled Don to lower the pole all the way to the ground and as I turned to undo the chokers from under the poles, I realized that the pole had been placed right on top of my feet, and I couldn’t move. It was at times like that when I was glad that I was wearing Steel Toed Boots. — A must when you are working in a power plant.
Steel Toed Boots
So, finding myself stuck, I straightened myself up and signaled to Don that I wanted him to raise the pole up. He looked a little confused as if he thought I had given him the wrong signal (again…). But when I didn’t change my signal, he succumbed and raised the pole off the ground. At that point, I took one step backward and with the straightest face I could muster, I signaled for Don to lower the pole back to the ground. I saw the smile go across Don’s face when he finally realized that I had been held captive by the pole, and I smiled back because at that point, I couldn’t look serious, and what would be the point anyway.
During the first summer that Stanley was my foreman, I carpooled with him and 5 others. We would all pile into Stanley’s station wagon and head home at the end of the day. I would be dropped off at the corner of Washington and Lakeview Dr. in Stillwater and would walk the rest of the way home, about a mile down the road and across a field to my parent’s house. We each paid Stanley $5.00 each week for the ride, and we didn’t have to worry about the gas and the driving. It was left up to Stanley.
So, why Stanley? That was the question I was going to answer when I started this post. Well. I think I have a good reason. All during the summer, Stanley was studying different types of weed killers that could be used around the lake without causing harm to the lake itself. He was very conscious about keeping the lake pristine and free from poisonous chemicals.
He finally found a weed killer that was approved by the department of Agriculture at Oklahoma State University in Stillwater to be used around lakes. By Stanley’s conscientious view of the Power Plant Property, I could see that he was a good choice for supervising the yard crew. We did spend many hours driving down the roadways spraying the newly mowed and chopped weeds with weed killer with the knowledge that we weren’t causing more harm than good.
But that wasn’t the only reason. I think Stanley was put over the garage crew because he took such great care with his own vehicles. I had the opportunity to see the engine in the station wagon that ferried us to work and home each day, and when I first saw it, I was astounded. The entire engine was cleaned and polished and even waxed!
Shiny like this engine is shiny
Even though the engine had over 100,000 miles on it, it looked brand new. Stanley said that he keeps his engine spotless so that at the first sign of any kind of leak, he takes the steps necessary to fix it before it becomes a real problem.
I remember one Monday morning while we were on the way to work, and the Power Plant Men in the car, which included John Blake and another inspector, were talking about what they did over the weekend. Stanley said that he spent all day Saturday cleaning his car. I knew what he meant. That included waxing his engine.
I had the opportunity to go to Stanley’s house one day to drop something off or pick something up, I don’t remember, but what I do remember is that when I arrived at his humble abode, the front yard, as small and normal as the rest of the neighborhood, was so well groomed. It looked like someone had taken a scissors and carefully clipped all of the blades of grass just the right height. The various rocks and bird bath, and other yard ornaments were placed so perfectly that it had transformed this normal little yard into a complete work of art.
A yard not near as perfect as Stanley’s
So, why was Stanley chosen to be the foreman over the yard crew and the Automotive garage? I believe it was because he had demonstrated by the way he took care of his own property that those in the Electric Company who knew that, knew that he was a man that would take care of their property equally as well. So, I salute Stanley for being a great foreman to work for, and never letting the work seem dull. He treated everyone in the shop with respect (except maybe in the middle of a joke). I wish I had a picture to show you, because I was unable to think of any actor or historical figure that reminds me of him. There just isn’t anyone else quite like Stanley.
Stanley died at too young of an age.
Comments from the original Post:
Power plant jokes are the greatest! I remember one time I was going on vacation (as a Control Room Operator) and my assistant was filling in for me for the first time (let’s call him “Dave”) well, anyway the Shift Supervisor asked me if I felt Dave was up to the task (Dave is an excellent operator). I told the Supervisor I had faith in Dave, but he should keep a close eye on him, so the whole time I was on vacation, the Supervisor hovered over Dave’s shoulder like a buzzing mosquito! And to add icing to the cake, on Dave’s performance appraisal the Supervisor wrote “Dave is a competent operator…but needs a little too much personal supervision!!
This is the kind of fun power plant men have with each other, no one is closer than a CO and his assistant, and Dave was, and always will be a great friend. We’ve been to each others weddings & helped each other through divorces. He’s a Control Room Operator of his own crew now, but we still get a kick out of laughing over the good times we had working together.
A book could/should be written on all the classic power plant jokes over the years. Some of the oldest I’ve heard from the Osage and Belle Isle vintage power plant men.
Something that comes through these stories: There existed in those days a very different attitude toward both one’s work and one’s coworkers, at least in industrial settings. I found it in both aircraft manufacturing and the telephone business.
It doesn’t seem to exist today or at least, isn’t obvious and I think that represents an unfortunate loss to our society…
Steel toed boots are a great safety idea around a power plant. One of the employee benefits I enjoyed while working at the WFEC Hugo power plant was a new pair of steel toed boots every year. I’ve still got a pair of them. I wore them last May while clearing tornado debris in Moore, OK. And I gave a pair to my grandson. He wears them everywhere (even to church!).
Thanks for these memories, Kevin. They’re great!
Why Stanley Elmore and Other Power Plant Questions
Originally posted September 7, 2012:
Why Stanley Elmore? I suppose that was on the mind of a few Power Plant Men when the foreman for the new Automotive Garage and Yard crew was chosen in 1980. What did Stanley have that the rest of the Power Plant Men lacked? Why did Stanley accept such a position in a power plant out in the middle of nowhere in the plains of Oklahoma? I have some thoughts about these questions and others that I will share with the rest of the Power Plant Kingdom.
When I returned to the Power Plant for my second summer as a summer help in 1980, I found that the Automotive Garage had been finished and a new crew had been assigned to work from this shop. Doug House, Jim Heflin, Larry Riley and Ken Conrad were there to welcome me. I had only known Larry from the year before and when he saw that I was returning, he actually said he was glad to see me. It was usually hard to tell what Larry was thinking because he kept a straight face even when he was chuckling under his breath. So, I never really knew what he thought about me until he told the others that he was glad that I would be working there this summer.
Then the new foreman walked in. He was a medium height stocky man that had obviously come from another plant and was well seasoned in the ways of Power Plant etiquette. This required him to act as if I had just walked into a snake pit and my summer was going to be a living Hell working under him. Of course I accepted this well knowing that this merely meant that he had a lot for us to do during the summer and I should enjoy myself.
There was another summer help there, David Foster. He had been hired because he had experience driving a Tractor, and he would spend a lot of the time that summer mowing grass. That is, until he wrecked a new brush hog while going perpendicular across a ditch at too high rate of speed.
Almost Like this without the safety guards and just about as new
(Boy, I’m getting a lot of mileage out of that one picture of a Brush Hog). At that point, he started working on watering the grass, as I did (and you can read about that in the post “When Power Plant Men Talk, It Pays to Listen“).
A short time after I had been there I realized that there was another resident of the garage. It was Don Pierce that came from Construction to operate the P&H Crane used by the Plant. Here is a Picture of the same kind of P&H Crane that Don Pierce operated for at least two of the summers that I was working out of the Garage.
A P&H Crane, just like the one at the plant
Don Pierce was a tall person with a moustache and tinted glasses. He was chewing something often that he spit into a cup or a Coke can, that made a squeaky squirty sound each time he spit. He always looked to me like he wore the same size jeans that he wore when he graduated from High School, even though the rest of him had filled out some. Making him look like his upper body had been squeezed some out of his jeans. Like Hank Hill in King of the Hill:
Don had too tight jeans like this only his belt buckle was much bigger
It didn’t take long to figure out that Stanley Elmore loved to play jokes on people. He would get the biggest laugh from causing someone a moment of confusion. He would shake his head and laugh and say, “oooooohhh weeee” (or something similar). I always had a bigger kick out of watching Stanley’s reaction to someone encountering his joke than I did from the joke itself. As you may have learned from an earlier post “Power Plant Painting Lessons with Aubrey Cargill“, that I was the target of at least some of his jokes. It would make me laugh to know that Stanley was playing a joke on me.
Actually, anytime during my time at the plant it made me laugh to find that someone was playing a joke on me. I remember while I was a janitor that one day while I was cleaning out the bathroom in the Electric Shop, I would first Sweep out the bathroom and then mop it. Many times I turned around to pick up something that was sitting just outside the door of the bathroom I found that it had moved.
Like the mop bucket had moved down to the door by the lab. Everyone in the shop was just doing their normal job. But when I walked out of the bathroom to find the handle missing from the push broom and Andy Tubbs and Ben Davis sitting at the break table acting like nothing was wrong, I had to walk back into the bathroom in order to keep them from seeing how hard I was laughing.
For some reason that was the funniest joke I encountered. To turn around in one moment and have the broom handle gone and the broom itself just sitting on the floor with no handle and the obvious culprit Andy Tubbs trying his best to keep a straight face and act like he wasn’t noticing anything. I still laugh when I think about it 30 years later.
Stanley’s jokes were of that caliber. When Don Pierce drove to work one day on his new Harley Davidson Motorcycle, Stanley just couldn’t resist. He started out by asking him if he noticed that it leaked oil. Don said it better not, because he just bought it brand new. Stanley answered by saying that Harley Davidsons always leaked oil.
A Harley Davidson similar to the one Don Pierce had
So, while Don was out operating the P&H Crane, Stanley took a small cup of oil and poured a little oil spot under his motorcycle, just as a reminder to Don that all Harleys in 1980 leaked oil. Then Stanley watched and waited for Don to stroll by his motorcycle in the parking lot during lunch to see what his reaction would be. Of course, Don had been an Electric Company Construction worker long enough to spot a snow job when he saw a grease spot. But it did make him smile to know that Stanley had gone through the trouble of putting an oil spot under his motorcycle. — That’s one way to know that someone really cares about you. They are willing to take the time out of their busy day to play a little power plant joke on you.
I was able to work one-on-one with Don Pierce for about a week that summer when we had to go to the laydown yard by the main gate and organize all the spare cable, rebar, piping, et cetera into neat rows and in some kind of order like from largest to smallest. In order to put the large reels of cable into neat rows, we would line up two rows of very large telephone poles close to each other, and then place the reels on the poles to keep them off of the ground so they would last longer, and not sink into the ground when it rained.
To give you an idea. Some of the wooden reels were taller than me
Don was operating the crane and I was doing my best to use the newly learned hand signals to direct him where to go and what to do. There was a hand signal for everything, and I was afraid that if I stopped to itch my nose, Don would cut the engine and leave for lunch.
I had been studying this chart during break before we went to the laydown yard
We were picking up wooden telephone poles and carefully placing them in a line, and I was standing there guiding the poles into place as they were lowered to the ground. At one point, I had signaled Don to lower the pole all the way to the ground and as I turned to undo the chokers from under the poles, I realized that the pole had been placed right on top of my feet, and I couldn’t move. It was at times like that when I was glad that I was wearing Steel Toed Boots. — A must when you are working in a power plant.
Steel Toed Boots
So, finding myself stuck, I straightened myself up and signaled to Don that I wanted him to raise the pole up. He looked a little confused as if he thought I had given him the wrong signal (again…). But when I didn’t change my signal, he succumbed and raised the pole off the ground. At that point, I took one step backward and with the straightest face I could muster, I signaled for Don to lower the pole back to the ground. I saw the smile go across Don’s face when he finally realized that I had been held captive by the pole, and I smiled back because at that point, I couldn’t look serious, and what would be the point anyway.
During the first summer that Stanley was my foreman, I carpooled with him and 5 others. We would all pile into Stanley’s station wagon and head home at the end of the day. I would be dropped off at the corner of Washington and Lakeview Dr. in Stillwater and would walk the rest of the way home, about a mile down the road and across a field to my parent’s house. We each paid Stanley $5.00 each week for the ride, and we didn’t have to worry about the gas and the driving. It was left up to Stanley.
So, why Stanley? That was the question I was going to answer when I started this post. Well. I think I have a good reason. All during the summer, Stanley was studying different types of weed killers that could be used around the lake without causing harm to the lake itself. He was very conscious about keeping the lake pristine and free from poisonous chemicals.
He finally found a weed killer that was approved by the department of Agriculture at Oklahoma State University in Stillwater to be used around lakes. By Stanley’s conscientious view of the Power Plant Property, I could see that he was a good choice for supervising the yard crew. We did spend many hours driving down the roadways spraying the newly mowed and chopped weeds with weed killer with the knowledge that we weren’t causing more harm than good.
But that wasn’t the only reason. I think Stanley was put over the garage crew because he took such great care with his own vehicles. I had the opportunity to see the engine in the station wagon that ferried us to work and home each day, and when I first saw it, I was astounded. The entire engine was cleaned and polished and even waxed!
Shiny like this engine is shiny
Even though the engine had over 100,000 miles on it, it looked brand new. Stanley said that he keeps his engine spotless so that at the first sign of any kind of leak, he takes the steps necessary to fix it before it becomes a real problem.
I remember one Monday morning while we were on the way to work, and the Power Plant Men in the car, which included John Blake and another inspector, were talking about what they did over the weekend. Stanley said that he spent all day Saturday cleaning his car. I knew what he meant. That included waxing his engine.
I had the opportunity to go to Stanley’s house one day to drop something off or pick something up, I don’t remember, but what I do remember is that when I arrived at his humble abode, the front yard, as small and normal as the rest of the neighborhood, was so well groomed. It looked like someone had taken a scissors and carefully clipped all of the blades of grass just the right height. The various rocks and bird bath, and other yard ornaments were placed so perfectly that it had transformed this normal little yard into a complete work of art.
A yard not near as perfect as Stanley’s
So, why was Stanley chosen to be the foreman over the yard crew and the Automotive garage? I believe it was because he had demonstrated by the way he took care of his own property that those in the Electric Company who knew that, knew that he was a man that would take care of their property equally as well. So, I salute Stanley for being a great foreman to work for, and never letting the work seem dull. He treated everyone in the shop with respect (except maybe in the middle of a joke). I wish I had a picture to show you, because I was unable to think of any actor or historical figure that reminds me of him. There just isn’t anyone else quite like Stanley.
Stanley died at too young of an age.
Comments from the original Post:
Power plant jokes are the greatest! I remember one time I was going on vacation (as a Control Room Operator) and my assistant was filling in for me for the first time (let’s call him “Dave”) well, anyway the Shift Supervisor asked me if I felt Dave was up to the task (Dave is an excellent operator). I told the Supervisor I had faith in Dave, but he should keep a close eye on him, so the whole time I was on vacation, the Supervisor hovered over Dave’s shoulder like a buzzing mosquito! And to add icing to the cake, on Dave’s performance appraisal the Supervisor wrote “Dave is a competent operator…but needs a little too much personal supervision!!
This is the kind of fun power plant men have with each other, no one is closer than a CO and his assistant, and Dave was, and always will be a great friend. We’ve been to each others weddings & helped each other through divorces. He’s a Control Room Operator of his own crew now, but we still get a kick out of laughing over the good times we had working together.
A book could/should be written on all the classic power plant jokes over the years. Some of the oldest I’ve heard from the Osage and Belle Isle vintage power plant men.
Something that comes through these stories: There existed in those days a very different attitude toward both one’s work and one’s coworkers, at least in industrial settings. I found it in both aircraft manufacturing and the telephone business.
It doesn’t seem to exist today or at least, isn’t obvious and I think that represents an unfortunate loss to our society…
Steel toed boots are a great safety idea around a power plant. One of the employee benefits I enjoyed while working at the WFEC Hugo power plant was a new pair of steel toed boots every year. I’ve still got a pair of them. I wore them last May while clearing tornado debris in Moore, OK. And I gave a pair to my grandson. He wears them everywhere (even to church!).
Thanks for these memories, Kevin. They’re great!
How Many Power Plant Men Can You Put in a 1982 Honda Civic?
Originally Posted on September 21, 2012:
Not long after I became a full time Power Plant employee after I had moved from being a janitor to the labor crew in 1983, I began carpooling with 3 other Power Plant employees. An Electrician, Bill Rivers. A Chemist, Yvonne Taylor, and one of the new members of the Testing team, Rich Litzer. With such a diverse group, you can only imagine the types of topics that were discussed driving to and from work each day.
Bill Rivers usually talked about different absurdities that he encountered during his day as an electrician. How one hand doesn’t know what the other hand is doing, leading sometimes to very funny results. Yvonne Taylor would talk about her farm and something called School Land Lease that she farmed, and how she had to deal with the bureaucracy and the constantly changing laws. Rich Litzer would discuss how their newly formed team were learning new things at the plant and often had funny things to say about his encounters during the day.
Me? Occasionally I would lift up my head from the book I was reading (if I wasn’t the driver), and ask, “Would anyone like to hear about the training that we received from Johnson & Johnson about how to properly wax a floor using their top of the line wax, ShowPlace?” that didn’t usually jump to the top of the list of most interesting stories.
The Best Floor Wax money can buy!
We did use ShowPlace wax by Johnson and Johnson, and they did send a representative to our plant to teach us backward Oklahoma hick janitors how to properly care for our plain tile hallways and offices. Not the fancy tile like they have these days. If you are over 50 years old, then it is probably the same type of tile that you had on the floors of your school if you went to the standard brick public elementary school like the one I used to attend.
The office area floors were sure shiny after we applied a healthy dose of ShowPlace on them. The Johnson and Johnson rep. taught us how to properly buff the floor and showed us how a properly buffed floor that was really shiny was actually less slick than a badly waxed floor.
Anyway, I digress. Waxing floors is usually something that I tend to ramble about when I have an audience that shows interest in it (which I’m still trying to find). Since I can’t see your expression, I can only suspect that you would like to hear more about Power Plant floor waxing techniques, so I just might indulge you later on in this post after I have talked about the three other people in the car.
When it was my turn to drive to work, everyone had to climb into my 1982 Honda Civic:
A 1982 Honda Civic
Bill Rivers was about 10 years younger than my father and I know he had at least 6 children (I think). Maybe more. He told me once that even he lost count. Before he came to work at the Power Plant, he lived in Columbia, Missouri (while I had lived there, coincidentally), and worked at a Tool and Die manufacturing plant.
He worked so much overtime that one day he came home and sat down to eat dinner and sitting across from him at the table was a young boy that he didn’t recognize. He figured that he was a friend one of his own kids had invited to supper, so he asked him, “What’s your name?” Come to find out, it was one of his own children.
Bill had spent so little time at home that he didn’t even recognize his own child because his children were growing up and he was missing it. Mainly because he worked so much overtime. That was when Bill decided to move to Oklahoma and go to work at the power plant. Probably at the same time when I had moved to work there also, and was still going back to Columbia to finish college before becoming a full fledged bona-fide Power plant Janitor.
Bill Rivers always seemed to be having fun, and usually at the expense of someone else. He was constantly playing jokes on someone, and his most common target was Sonny Kendrick, the Electrical Specialist. Sonny was somewhat gullible, and so, Bill would weave some very complicated stories together to draw Sonny’s attention and string it along until Sonny was totally believing something preposterous.
Sonny Kendrick
Sonny wasn’t gullible like Curtis Love was gullible. Sonny knew that Bill Rivers was always trying to pull something over on him. So, Bill would just see how far along he could string Sonny until Sonny realized that everything Bill was saying was just made up in his head. — Then Bill Rivers would spend the rest of the week chuckling about it. Which usually aggravated Sonny to no end.
Sonny Kendrick was the only Electrical Specialist at the plant. I suppose he had some electronics training that allowed him to hold that honored position. His real name is Franklin Floyd Kendrick. I first met Sonny when I was the janitor for the Electric Shop.
People would call him “Baby Huey”. Since I didn’t know who Baby Huey was, I just figured that it was some character that reminded them of Sonny. So, when I had the opportunity, I looked up Baby Huey (this was a number of years before the Internet). I still wasn’t sure why, unless they were talking about a different Baby Huey:
I didn’t really get the connection, unless it had something to do with the diaper or the facial expression
Bill Rivers had a son that was in High School at the time, and he had the same Algebra teacher that my brother Greg had when he was trying to learn Algebra. The teacher had a real problem teaching algebra to high school students, and Bill asked me if I would tutor his son in Algebra.
When I first met Bill’s son, (I think his name was either Jerard or Bryan, I don’t remember now – well, that’s not too surprising considering even Bill Rivers forgot his name once), his life ambition was to graduate from High School and work as a mechanic in an auto garage and drive motorcycles. I tried to show him how interesting and fun Algebra and Math in general could be, so each time I went to meet with him, I would bring him either a math puzzle or a book with a story about a mathematician, or a neat Mathematical oddity… such as imaginary numbers, and things like that.
Later, long after Bill had moved to another Power Plant in Konawa, Oklahoma, I saw Bill, and he told me that he his son was working toward becoming a dentist. I don’t know if he was ever able to fulfill his dream, but when I visit Oklahoma, I keep my eye out for a guy on a motorcycle with a Dentist symbol on the back of his Harley Davidson jacket. Because that would probably be him.
The Dental Symbol. it would probably look good on a Harley Jacket, don’t you think?
Anyway, while the four of us were carpooling together, the person that did the most talking was Yvonne Taylor. Now, I like Yvonne Taylor. I liked her a lot. But she was the main reason why I was never able to practice my Ramblin’ Ann rambles (See the post “Ed Shiever Trapped in a Confined Space With a Disciple of Ramblin’ Ann“) because she was usually in the midst of exercising her right to ramble as well.
Since she was my elder, (almost my mother’s age), I always let her go first, which usually meant there wasn’t much of a chance for anyone to go second. I finally just decided this would be a great time to read. So I started reading books about different sorts of religions around the world. With the Bhagavad Gita being one of my favorite ones.
I always had a certain attraction to Yvonne, because she had a son named Kevin (which is my name), and a daughter named Kelley (My girlfirend’s name at the time was Kelly, now she is my wife). And her son and daughter were about the same age as my future wife and I were.
In the midst of rambles emanating from Yvonne, I would look up every time I would hear, “Kelley said this, or Kevin said that….” She did say one thing one time that I have always remembered and I have tried to follow. Yvonne said that you never want to buy a house that is West of the place where you work. Especially if it is any distance away.
I believe it was when she lived in Michigan, she had to drive a long way East every day, and the sun was glaring in her eyes all the way to work. Then when she had to drive home going West in the evening, the sun was glaring in her eyes as it was going down. So, when you live West of your workplace, you have to drive with the sun in your eyes every day, both ways, and you just pray and pray for rain or at least a cloudy day.
I didn’t know it at the time, but Yvonne’s husband, Pat, had a dad with last name Taylor (obviously), and his mom’s Maiden Name was Songer. My Grandmother’s last name is Taylor (by marriage), and my wife Kelly has a Grandmother who’s maiden name was Songer. So there was that as well.
Unfortunately for Yvonne, was that by the time we arrived at the plant in the morning, she was usually slightly hoarse. I don’t know if it was the morning air… or maybe… it could have possibly been the rambling…. So, when she would have to page someone on the PA system (The Gaitronics Gray Phone), she sounded a little bit like the wicked witch. Just like some clothes can cause someone to look fatter than other clothes, the Gray Phone system had a tendency to make one’s voice more “tinny” than it actually is. Especially if your voice is hoarse, and high pitched already.
Gaitronics Gray Phone
So, whenever I heard Yvonne paging someone and I was in the Electric shop or with the janitor crew, I would say, “Yvonne just has the sexiest voice I’ve ever heard. I can’t hardly Stand it!!” Those who were hearing me for the first time would give me a look like I must be crazy. And Well… who knows for sure. I think the Electricians knew for sure.
Rich Litzer lived just up the street from me, so I would drive by his house and pick him up, or I would park my car at his house and we would take his car, and we would meet Bill Rivers and Yvonne Taylor at the local Bowling Alley, since it was on the main drag out of town on Washington Street in Stillwater, Oklahoma.
Rich was a great guy to carpool with because he usually had a lighthearted story to tell about something that happened at home, or we would talk about something else equally not serious. Later he was relocated downtown in Corporate Headquarters, and I didn’t see him for a long time.
Then one day, Rich and Ron Madron came down to Austin, Texas (where I live now) after I had moved down to work for Dell, to go to a school or conference, and I was able to meet them for dinner. That was the last time I saw Rich or Ron, and that was about 9 or 10 years ago (now 16 years).
At this point I was going to rambl… I mean…. talk more about how we used to wax the floor when I was a janitor, however, I have decided to leave that for another post “Wax On, Wax Off and other Power Plant Janitorial Secrets“.
Today when I finally found out that the post I was going to write was about my carpooling with Bill Rivers, Yvonne Taylor and Rich Litzer, I went to the Internet and looked up the latest news on my old friends. To my surprise, I found that Yvonne’s husband Patrick, died on September 12, just 9 days ago.
I don’t think I ever met Patrick in person, however, I used to hear about his daily activities for the 2 1/2 years from October 1982 through December 1985 when I used to carpool with Yvonne. Learning about Patrick’s death has saddened me because I know how much Yvonne loved and cared for Patrick. I know she has four sons and two daughters that are there to comfort her. I offer Yvonne my condolences and I wish her all the best.
Yvonne Taylor’s husband the past 52 years, Patrick Taylor
Comment from Previous Post:
Power Plant Men Learn how Money Matters
Many years ago in my earlier days as a Power Plant Electrician while working on Relays at the coal-fired Power Plant in North Central Oklahoma, Ben Davis, a plant electrician and True Power Man introduced me to one of his favorite Rock and Roll Bands, the “Dire Straits”. One of their hit songs is “Money For Nothing.” About 14 years later, the Power Plant Men learned exactly how to make “Money For Nothing” and other “Money Matters”!
Albert Einstein was once asked what the greatest miracle known to man is, and he replied “Compound Interest”.
Albert Einstein
One day at the Power Plant our timekeeper Linda Shiever invited a Financial Planner to come to the plant and talk to the Power Plant Men about the importance of planning ahead for your retirement. This may have been the first time many of the Power Plant Men had ever heard of such a thing as “Compound Interest”.
Linda Shiever
To a Power Plant Man, “Compound Interest” sounds more like “paying close attention when you pound something with a sledge hammer”.
The Financial Planner explained to the Power Plant Men that it is important to begin planning for the future early in your life. He gave us a sheet of paper titled “Put the Magic of compounding to work for you.” It showed how someone 25 years old investing in the stock market (S&P 500 which averages 10% annually over time) by putting $2,000 in something that gives you a 10% return for 8 years, and then stops, while another person waits 8 years until they are 33 and spends the rest of their life putting $2,000 into the same stock market they will never have as much as the person who only put in $2000 for 8 years beginning when they were 25 years old.
Let me explain this a little more: Using compound interest at 10% rate for his example (since that is what you receive in the S&P 500 over time), he showed that the person that invested $16,000 beginning at 25 years old and adding $2000 each year for only 8 years will have a net earnings of over $1,000,000 by the time they are 71 years old. Yet the person that waited 8 years and invested $78,000 by adding $2,000 each year until they are 71 will only have a net earnings of $800,000. The importance was that compound interest works best when you start early.
This is a great lesson to learn. The problem was that the majority of the audience was already well over 40 years old. There may have been one person in the room that was 25 years old, and that was only because they weren’t telling the truth about their age.
On Friday, September 6, 1996 a group of us from the plant were told to show up at a hotel conference room not far from corporate headquarters to attend a meeting that was called “Money Matters”. The other phrase they used to describe the meeting was that it was a “Root Learning” class. The reason it was called Root Learning was because the company that put the class together for the Electric Company was called Root Learning.
When we arrived, we were told which table we were going to sit. Bruce Scambler was the leader of the table where I was appointed to sit. When we were assigned seats, it was in a way that the Power Plant Men were spread out across the tables, so that we were each sitting with people from other departments in the company. I supposed right away that this was so that we could maximize the spread of the Power Plant culture to others.
This turned out to be a class about how the company has problems that need to be resolved. When the class began the leader placed a poster in the middle of the table. It showed a picture of a canyon. The workers were on one side and the leaders were on the other with the managers stuck in the middle. It was very similar to this picture:
The Canyon Root Learning Map
This was an ingenious representation of the problems the company had with the management structure. The poster we had was customized for our particular company.
We talked for a couple of hours about how we could bridge the gap between management and the workers. What were some of the barriers in the tornado that kept destroying those bridges…. etc.
The following year on September 24, 1997, we attended another meeting in Enid Oklahoma where we learned about Shareholder value. The leader of my table this year was a young man from HR at Corporate Headquarters (I’ll mention this guy in a later post). This topic made more sense as it really did talk about Money this time. This time the maps they showed us had race cars on it which showed the different competing electric companies. Something like this:
The Shareholder learning map
Being the main electric company in the state, our truck was on the Regulated track. Some of the electric providers had figured out a way to go the unregulated route. Our company kept looking for ways to get on the unregulated road by offering other services that were not regulated. After looking at the poster that looked similar to the one above for a while and talking about it, we moved on to the next poster:
The second Shareholder Map
Even though the chart is the main part of this picture, most of the discussion took place around the “Expense Street” section in the picture. There was an added pie chart that was on a card that was placed on this street which showed how the expenses of the company were broken down.
The main expense for the company was Fuel. I want to say that it was close to 40% of expenses. Taxes was the next largest expense for the company. It made up somewhere around 30% of our total expenses. The rest of the expenses were the other costs to run the company. Employee wages made up around 8% of the total expenses for the company.
Employee wages was the smallest piece of the pie
It was the job of the leader at the table to explain that the cost for fuel was pretty well fixed, so we can’t do anything about that. We also can’t do anything about how much taxes the company pays. We didn’t have control over the supplies and other costs the company buys. So, the bottom line was that the little sliver of expenses for the company that represented “Employee Wages” was really the only thing we can adjust to increase shareholder value…..
What? Run that one by me again? We were a 3 billion dollar revenue company. We had around 3,000 employees which we had reduced to around 2,000 employees when the Corporation Commission cut how much we could charge for electricity, and now you’re saying that the only way to keep the company afloat is to “adjust” employee wages because 92% of everything else it “out-of-bounds”? I think you can see why we spent a lot of time discussing this… This turned into a pretty lively discussion.
Learning about the “Time Value of Money” can be very helpful. I had a financial calculator that I kept at the plant. One day one of the Power Plant Men came to me and asked me to figure out how they could buy a Harley Davidson Motorcycle. Earl Frazier said that he could only afford something like $230 per month and the wanted to buy this motorcycle. How would he do that? The motorcycle cost something like $38,000 or more. I don’t remember the exact details.
A Harley Davidson Motorcycle
Sounds complicated doesn’t it? How does a Power Plant Man buy a Harley Davidson for only $230.00 per month with only a four year loan? Earl had heard that I knew all about the “Time Value of Money” and that if there was a way, I would be able to tell him how to do it. His parameters were that the cost of the motorcycle was $38,000 (I’m just guessing as I don’t remember the exact amounts), and he could only pay $230 each month.
Well. Even with a no interest loan, it would take over 13 years to pay for the motorcycle. So, my only option for solving this problem was to pull out my financial calculator:
My Texas Instrument BAII Plus Financial Calculator
This calculator allowed me to find the monthly payment quickly for a loan at a specific interest rate over a specific number of months. So, I worked backward from that point. I told Earl to come back in a couple of hours and I would let him know his options.
Earl Frazier
When Earl returned, I had his answer…. I told him this…. Each month he needed to begin putting his $230.00 into an annual CD at the bank for 5% (yeah… they had those at that time). In two and a half years, he would stop doing that. And just put his money in his regular checking account. Then 9 months later, he takes the money in his checking account and buys the Harley Davidson. This way he would put 10% down up front (because CDs would have been rolling into his account also).
Then, each month, as his CDs became available, he would roll part of them back into another year, leaving out a certain amount each time to supplement the $230.00 he would still be paying each month for his motorcycle, since his payments would be significantly higher than that. Then exactly after 4 years, he would have used up all of the money in his account just as he would be paying off his motorcycle. This would only work if he could get a loan for the motorcycle that charged 3.7% interest rate or less which was a reasonable rate at the time.
Earl responded by saying, “You mean I will have to wait 3 years before I can buy the motorcycle?!?!” Yeah. That was the bottom line… and by the end of it all, he would have to pay for the motorcycle over a 7 year period when it came down to it. He wasn’t too happy about having to wait, but that was the only way he could do it for $230 monthly payments.
Here is a side story… A few years later when I went to work for Dell, we also had Root Learning classes there as well. Here is one of the posters we used during the class:
In this picture, Dell is the big boat at the top. When I walked into the class I recognized the style of the poster right off the bat. Oh! Root Learning! This will be fun. These types of classes were a fun way to express the realities of the business and the obstacles they have to overcome to achieve their goals.
I still remember the leader at our table 13 years later. His name is Jonah Vaught. I worked with him about 5 years after that class. I acted like I knew him, and I could tell that he was wondering where we had met. So, I finally told him…. “You were the group leader when we were doing that Money Matters class back in 2002.”
End of Side story….
Now when I listen to the Dire Straits’ song “Money For Nothing” (like Paul Harvey’s “Rest of the Story”) you know what goes through my mind… First sitting in the switchgear working on relays with Ben Davis listening to Rock and Roll on the radio (see the post: “Relay Tests and Radio Quizzes with Ben Davis“).
Secondly, I remember the Power Plant Men learning the “Time Value of Money” in a fun way that kept them interested.
Thirdly, I remember Charles Lay finally realizing when he was 63 years old that he was going to have to work the rest of his life because he hadn’t been saving for retirement…. See the post “Pain in the Neck Muskogee Power Plant Relay Testing“). Some times when you learn about the Time Value of Money…. it’s too late to do anything about it because time has already run out.
Why Stanley Elmore and Other Power Plant Questions
Originally posted September 7, 2012:
Why Stanley Elmore? I suppose that was on the mind of a few Power Plant Men when the foreman for the new Automotive Garage and Yard crew was chosen in 1980. What did Stanley have that the rest of the Power Plant Men lacked? Why did Stanley accept such a position in a power plant out in the middle of nowhere in the plains of Oklahoma? I have some thoughts about these questions and others that I will share with the rest of the Power Plant Kingdom.
When I returned to the Power Plant for my second summer as a summer help in 1980, I found that the Automotive Garage had been finished and a new crew had been assigned to work from this shop. Doug House, Jim Heflin, Larry Riley and Ken Conrad were there to welcome me. I had only known Larry from the year before and when he saw that I was returning, he actually said he was glad to see me. It was usually hard to tell what Larry was thinking because he kept a straight face even when he was chuckling under his breath. So, I never really knew what he thought about me until he told the others that he was glad that I would be working there this summer.
Then the new foreman walked in. He was a medium height stocky man that had obviously come from another plant and was well seasoned in the ways of Power Plant etiquette. This required him to act as if I had just walked into a snake pit and my summer was going to be a living Hell working under him. Of course I accepted this well knowing that this merely meant that he had a lot for us to do during the summer and I should enjoy myself.
There was another summer help there, David Foster. He had been hired because he had experience driving a Tractor, and he would spend a lot of the time that summer mowing grass. That is, until he wrecked a new brush hog while going perpendicular across a ditch at too high rate of speed.
Almost Like this without the safety guards and just about as new
(Boy, I’m getting a lot of mileage out of that one picture of a Brush Hog). At that point, he started working on watering the grass, as I did (and you can read about that in the post “When Power Plant Men Talk, It Pays to Listen“).
A short time after I had been there I realized that there was another resident of the garage. It was Don Pierce that came from Construction to operate the P&H Crane used by the Plant. Here is a Picture of the same kind of P&H Crane that Don Pierce operated for at least two of the summers that I was working out of the Garage.
A P&H Crane, just like the one at the plant
Don Pierce was a tall person with a moustache and tinted glasses. He was chewing something often that he spit into a cup or a Coke can, that made a squeaky squirty sound each time he spit. He always looked to me like he wore the same size jeans that he wore when he graduated from High School, even though the rest of him had filled out some. Making him look like his upper body had been squeezed some out of his jeans. Like Hank Hill in King of the Hill:
Don had too tight jeans like this only his belt buckle was much bigger
It didn’t take long to figure out that Stanley Elmore loved to play jokes on people. He would get the biggest laugh from causing someone a moment of confusion. He would shake his head and laugh and say, “oooooohhh weeee” (or something similar). I always had a bigger kick out of watching Stanley’s reaction to someone encountering his joke than I did from the joke itself. As you may have learned from an earlier post “Power Plant Painting Lessons with Aubrey Cargill“, that I was the target of at least some of his jokes. It would make me laugh to know that Stanley was playing a joke on me.
Actually, anytime during my time at the plant it made me laugh to find that someone was playing a joke on me. I remember while I was a janitor that one day while I was cleaning out the bathroom in the Electric Shop, I would first Sweep out the bathroom and then mop it. Many times I turned around to pick up something that was sitting just outside the door of the bathroom I found that it had moved.
Like the mop bucket had moved down to the door by the lab. Everyone in the shop was just doing their normal job. But when I walked out of the bathroom to find the handle missing from the push broom and Andy Tubbs and Ben Davis sitting at the break table acting like nothing was wrong, I had to walk back into the bathroom in order to keep them from seeing how hard I was laughing.
For some reason that was the funniest joke I encountered. To turn around in one moment and have the broom handle gone and the broom itself just sitting on the floor with no handle and the obvious culprit Andy Tubbs trying his best to keep a straight face and act like he wasn’t noticing anything. I still laugh when I think about it 30 years later.
Stanley’s jokes were of that caliber. When Don Pierce drove to work one day on his new Harley Davidson Motorcycle, Stanley just couldn’t resist. He started out by asking him if he noticed that it leaked oil. Don said it better not, because he just bought it brand new. Stanley answered by saying that Harley Davidsons always leaked oil.
A Harley Davidson similar to the one Don Pierce had
So, while Don was out operating the P&H Crane, Stanley took a small cup of oil and poured a little oil spot under his motorcycle, just as a reminder to Don that all Harleys in 1980 leaked oil. Then Stanley watched and waited for Don to stroll by his motorcycle in the parking lot during lunch to see what his reaction would be. Of course, Don had been an Electric Company Construction worker long enough to spot a snow job when he saw a grease spot. But it did make him smile to know that Stanley had gone through the trouble of putting an oil spot under his motorcycle. — That’s one way to know that someone really cares about you. They are willing to take the time out of their busy day to play a little power plant joke on you.
I was able to work one-on-one with Don Pierce for about a week that summer when we had to go to the laydown yard by the main gate and organize all the spare cable, rebar, piping, et cetera into neat rows and in some kind of order like from largest to smallest. In order to put the large reels of cable into neat rows, we would line up two rows of very large telephone poles close to each other, and then place the reels on the poles to keep them off of the ground so they would last longer, and not sink into the ground when it rained.
To give you an idea. Some of the wooden reels were taller than me
Don was operating the crane and I was doing my best to use the newly learned hand signals to direct him where to go and what to do. There was a hand signal for everything, and I was afraid that if I stopped to itch my nose, Don would cut the engine and leave for lunch.
I had been studying this chart during break before we went to the laydown yard
We were picking up wooden telephone poles and carefully placing them in a line, and I was standing there guiding the poles into place as they were lowered to the ground. At one point, I had signaled Don to lower the pole all the way to the ground and as I turned to undo the chokers from under the poles, I realized that the pole had been placed right on top of my feet, and I couldn’t move. It was at times like that when I was glad that I was wearing Steel Toed Boots. — A must when you are working in a power plant.
Steel Toed Boots
So, finding myself stuck, I straightened myself up and signaled to Don that I wanted him to raise the pole up. He looked a little confused as if he thought I had given him the wrong signal (again…). But when I didn’t change my signal, he succumbed and raised the pole off the ground. At that point, I took one step backward and with the straightest face I could muster, I signaled for Don to lower the pole back to the ground. I saw the smile go across Don’s face when he finally realized that I had been held captive by the pole, and I smiled back because at that point, I couldn’t look serious, and what would be the point anyway.
During the first summer that Stanley was my foreman, I carpooled with him and 5 others. We would all pile into Stanley’s station wagon and head home at the end of the day. I would be dropped off at the corner of Washington and Lakeview Dr. in Stillwater and would walk the rest of the way home, about a mile down the road and across a field to my parent’s house. We each paid Stanley $5.00 each week for the ride, and we didn’t have to worry about the gas and the driving. It was left up to Stanley.
So, why Stanley? That was the question I was going to answer when I started this post. Well. I think I have a good reason. All during the summer, Stanley was studying different types of weed killers that could be used around the lake without causing harm to the lake itself. He was very conscious about keeping the lake pristine and free from poisonous chemicals.
He finally found a weed killer that was approved by the department of Agriculture at Oklahoma State University in Stillwater to be used around lakes. By Stanley’s conscientious view of the Power Plant Property, I could see that he was a good choice for supervising the yard crew. We did spend many hours driving down the roadways spraying the newly mowed and chopped weeds with weed killer with the knowledge that we weren’t causing more harm than good.
But that wasn’t the only reason. I think Stanley was put over the garage crew because he took such great care with his own vehicles. I had the opportunity to see the engine in the station wagon that ferried us to work and home each day, and when I first saw it, I was astounded. The entire engine was cleaned and polished and even waxed!
Shiny like this engine is shiny
Even though the engine had over 100,000 miles on it, it looked brand new. Stanley said that he keeps his engine spotless so that at the first sign of any kind of leak, he takes the steps necessary to fix it before it becomes a real problem.
I remember one Monday morning while we were on the way to work, and the Power Plant Men in the car, which included John Blake and another inspector, were talking about what they did over the weekend. Stanley said that he spent all day Saturday cleaning his car. I knew what he meant. That included waxing his engine.
I had the opportunity to go to Stanley’s house one day to drop something off or pick something up, I don’t remember, but what I do remember is that when I arrived at his humble abode, the front yard, as small and normal as the rest of the neighborhood, was so well groomed. It looked like someone had taken a scissors and carefully clipped all of the blades of grass just the right height. The various rocks and bird bath, and other yard ornaments were placed so perfectly that it had transformed this normal little yard into a complete work of art.
A yard not near as perfect as Stanley’s
So, why was Stanley chosen to be the foreman over the yard crew and the Automotive garage? I believe it was because he had demonstrated by the way he took care of his own property that those in the Electric Company who knew that, knew that he was a man that would take care of their property equally as well. So, I salute Stanley for being a great foreman to work for, and never letting the work seem dull. He treated everyone in the shop with respect (except maybe in the middle of a joke). I wish I had a picture to show you, because I was unable to think of any actor or historical figure that reminds me of him. There just isn’t anyone else quite like Stanley.
Comments from the original Post:
Powerplant jokes are the greatest! I remember one time I was going on vacation (as a Control Room Operator) and my assistant was filling in for me for the first time (let’s call him “Dave”) well, anyway the Shift Supervisor asked me if I felt Dave was up to the task (Dave is an excellant operator). I told the Supervisor I had faith in Dave, but he should keep a close eye on him, so the whole time I was on vacation, the Supervisor hovered over Dave’s shoulder like a buzzing mosquito! And to add icing to the cake, on Dave’s performance appraisal the Supervisor wrote “Dave is a competent operator…but needs a little too much personal supervision!!
This is the kind of fun powerplant men have with each other, no one is closer than a CO and his assistant, and Dave was, and always will be a great friend. We’ve been to each others weddings & helped each other through divorces. He’s a Control Room Operator of his own crew now, but we still get a kick out of laughing over the good times we had working together.
A book could/should be written on all the classic power plant jokes over the years. Some of the oldest I’ve heard from the Osage and Belle Isle vintage power plant men.
Something that comes through these stories: There existed in those days a very different attitude toward both one’s work and one’s coworkers, at least in industrial settings. I found it in both aircraft manufacturing and the telephone business.
It doesn’t seem to exist today or at least, isn’t obvious and I think that represents an unfortunate loss to our society…
Steel toed boots are a great safety idea around a power plant. One of the employee benefits I enjoyed while working at the WFEC Hugo power plant was a new pair of steel toed boots every year. I’ve still got a pair of them. I wore them last May while clearing tornado debris in Moore, OK. And I gave a pair to my grandson. He wears them everywhere (even to church!).
Thanks for these memories, Kevin. They’re great!
How Many Power Plant Men Can You Put in a 1982 Honda Civic?
Originally Posted on September 21, 2012:
Not long after I became a full time Power Plant employee after I had moved from being a janitor to the labor crew in 1983, I began carpooling with 3 other Power Plant employees. An Electrician, Bill Rivers. A Chemist, Yvonne Taylor, and one of the new members of the Testing team, Rich Litzer. With such a diverse group, you can only imagine the types of topics that were discussed driving to and from work each day.
Bill Rivers usually talked about different absurdities that he encountered during his day as an electrician. How one hand doesn’t know what the other hand is doing, leading sometimes to very funny results. Yvonne Taylor would talk about her farm and something called School Land Lease that she farmed, and how she had to deal with the bureaucracy and the constantly changing laws. Rich Litzer would discuss how their newly formed team were learning new things at the plant and often had funny things to say about his encounters during the day.
Me? Occasionally I would lift up my head from the book I was reading (if I wasn’t the driver), and ask, “Would anyone like to hear about the training that we received from Johnson & Johnson about how to properly wax a floor using their top of the line wax, ShowPlace?” that didn’t usually jump to the top of the list of most interesting stories.
The Best Floor Wax money can buy!
We did use ShowPlace wax by Johnson and Johnson, and they did send a representative to our plant to teach us backward Oklahoma hick janitors how to properly care for our plain tile hallways and offices. Not the fancy tile like they have these days. If you are over 50 years old, then it is probably the same type of tile that you had on the floors of your school if you went to the standard brick public elementary school like the one I used to attend.
The office area floors were sure shiny after we applied a healthy dose of ShowPlace on them. The Johnson and Johnson rep. taught us how to properly buff the floor and showed us how a properly buffed floor that was really shiny was actually less slick than a badly waxed floor.
Anyway, I digress. Waxing floors is usually something that I tend to ramble about when I have an audience that shows interest in it (which I’m still trying to find). Since I can’t see your expression, I can only suspect that you would like to hear more about Power Plant floor waxing techniques, so I just might indulge you later on in this post after I have talked about the three other people in the car.
When it was my turn to drive to work, everyone had to climb into my 1982 Honda Civic:
A 1982 Honda Civic
Bill Rivers was about 10 years younger than my father and I know he had at least 6 children (I think). Maybe more. He told me once that even he lost count. Before he came to work at the Power Plant, he lived in Columbia, Missouri (while I had lived there, coincidentally), and worked at a Tool and Die manufacturing plant.
He worked so much overtime that one day he came home and sat down to eat dinner and sitting across from him at the table was a young boy that he didn’t recognize. He figured that he was a friend one of his own kids had invited to supper, so he asked him, “What’s your name?” Come to find out, it was one of his own children.
Bill had spent so little time at home that he didn’t even recognize his own child because his children were growing up and he was missing it. Mainly because he worked so much overtime. That was when Bill decided to move to Oklahoma and go to work at the power plant. Probably at the same time when I had moved to work there also, and was still going back to Columbia to finish college before becoming a full fledged bona-fide Power plant Janitor.
Bill Rivers always seemed to be having fun, and usually at the expense of someone else. He was constantly playing jokes on someone, and his most common target was Sonny Kendrick, the Electrical Specialist. Sonny was somewhat gullible, and so, Bill would weave some very complicated stories together to draw Sonny’s attention and string it along until Sonny was totally believing something preposterous.
Sonny Kendrick
Sonny wasn’t gullible like Curtis Love was gullible. Sonny knew that Bill Rivers was always trying to pull something over on him. So, Bill would just see how far along he could string Sonny until Sonny realized that everything Bill was saying was just made up in his head. — Then Bill Rivers would spend the rest of the week chuckling about it. Which usually aggravated Sonny to no end.
Sonny Kendrick was the only Electrical Specialist at the plant. I suppose he had some electronics training that allowed him to hold that honored position. His real name is Franklin Floyd Kendrick. I first met Sonny when I was the janitor for the Electric Shop.
People would call him “Baby Huey”. Since I didn’t know who Baby Huey was, I just figured that it was some character that reminded them of Sonny. So, when I had the opportunity, I looked up Baby Huey (this was a number of years before the Internet). I still wasn’t sure why, unless they were talking about a different Baby Huey:
I didn’t really get the connection, unless it had something to do with the diaper or the facial expression
Bill Rivers had a son that was in High School at the time, and he had the same Algebra teacher that by brother Greg had when he was trying to learn Algebra. The teacher had a real problem teaching algebra to high school students, and Bill asked me if I would tutor his son in Algebra.
When I first met Bill’s son, (I think his name was either Jerard or Bryan, I don’t remember now), his life ambition was to graduate from High School and work as a mechanic in an auto garage and drive motorcycles. I tried to show him how interesting and fun Algebra and Math in general could be, so each time I went to meet with him, I would bring him either a math puzzle or a book with a story about a mathematician, or a neat Mathematical oddity… such as imaginary numbers, and things like that.
Later, long after Bill had moved to another Power Plant in Konawa, Oklahoma, I saw Bill, and he told me that he his son was working toward becoming a dentist. I don’t know if he was ever able to fulfill his dream, but when I visit Oklahoma, I keep my eye out for a guy on a motorcycle with a Dentist symbol on the back of his Harley Davidson jacket. Because that would probably be him.
The Dental Symbol. it would probably look good on a Harley Jacket, don’t you think?
Anyway, while the four of us were carpooling together, the person that did the most talking was Yvonne Taylor. Now, I like Yvonne Taylor. I liked her a lot. But she was the main reason why I was never able to practice my Ramblin’ Ann rambles (See the post “Ed Shiever Trapped in a Confined Space With a Disciple of Ramblin’ Ann“) because she was usually in the midst of exercising her right to ramble as well.
Since she was my elder, (almost my mother’s age), I always let her go first, which usually meant there wasn’t much of a chance for anyone to go second. I finally just decided this would be a great time to read. So I started reading books about different sorts of religions around the world. With the Bhagavad Gita being one of my favorite ones.
I always had a certain attraction to Yvonne, because she had a son named Kevin (which is my name), and a daughter named Kelley (My girlfirend’s name at the time was Kelly, now she is my wife). And her son and daughter were about the same age as my future wife and I were.
In the midst of rambles emanating from Yvonne, I would look up every time I would hear, “Kelley said this, or Kevin said that….” She did say one thing one time that I have always remembered and I have tried to follow. Yvonne said that you never want to buy a house that is West of the place where you work. Especially if it is any distance away.
I believe it was when she lived in Michigan, she had to drive a long way East every day, and the sun was glaring in her eyes all the way to work. Then when she had to drive home going West in the evening, the sun was glaring in her eyes as it was going down. So, when you live West of your workplace, you have to drive with the sun in your eyes every day, both ways, and you just pray and pray for rain or at least a cloudy day.
I didn’t know it at the time, but Yvonne’s husband, Pat, had a dad with last name Taylor (obviously), and his mom’s Maiden Name was Songer. My Grandmother’s last name is Taylor (by marriage), and my wife Kelly has a Grandmother who’s maiden name was Songer. So there was that as well.
Unfortunately for Yvonne, was that by the time we arrived at the plant in the morning, she was usually slightly hoarse. I don’t know if it was the morning air… or maybe… it could have possibly been the rambling…. So, when she would have to page someone on the PA system (The Gaitronics Gray Phone), she sounded a little bit like the wicked witch. Just like some clothes can cause someone to look fatter than other clothes, the Gray Phone system had a tendency to make one’s voice more “tinny” than it actually is. Especially if your voice is hoarse, and high pitched already.
Gaitronics Gray Phone
So, whenever I heard Yvonne paging someone and I was in the Electric shop or with the janitor crew, I would say, “Yvonne just has the sexiest voice I’ve ever heard. I can’t hardly Stand it!!” Those who were hearing me for the first time would give me a look like I must be crazy. And Well… who knows for sure. I think the Electricians knew for sure.
Rich Litzer lived just up the street from me, so I would drive by his house and pick him up, or I would park my car at his house and we would take his car, and we would meet Bill Rivers and Yvonne Taylor at the local Bowling Alley, since it was on the main drag out of town on Washington Street in Stillwater, Oklahoma.
Rich was a great guy to carpool with because he usually had a lighthearted story to tell about something that happened at home, or we would talk about something else equally not serious. Later he was relocated downtown in Corporate Headquarters, and I didn’t see him for a long time.
Then one day, Rich and Ron Madron came down to Austin, Texas (where I live now) after I had moved down to work for Dell, to go to a school or conference, and I was able to meet them for dinner. That was the last time I saw Rich or Ron, and that was about 9 or 10 years ago.
At this point I was going to rambl… I mean…. talk more about how we used to wax the floor when I was a janitor, however, I have decided to leave that for another post “Wax On, Wax Off and other Power Plant Janitorial Secrets“.
Today when I finally found out that the post I was going to write was about my carpooling with Bill Rivers, Yvonne Taylor and Rich Litzer, I went to the Internet and looked up the latest news on my old friends. To my surprise, I found that Yvonne’s husband Patrick, died on September 12, just 9 days ago.
I don’t think I ever met Patrick in person, however, I used to hear about his daily activities for the 2 1/2 years from October 1982 through December 1985 when I used to carpool with Yvonne. Learning about Patrick’s death has saddened me because I know how much Yvonne loved and cared for Patrick. I know she has four sons and two daughters that are there to comfort her. I offer Yvonne my condolences and I wish her all the best.
Yvonne Taylor’s husband the past 52 years, Patrick Taylor
Comment from Previous Post:
-
Great story, Kevin! I’ll bet you didn’t know I used to run a floor scrubber-/polisher. Yep – at the big TG&Y store in Shepherd Mall (OKC). I helped in opening the store in 1964 and continued working there for a couple of years as a “Stock Boy”.
Power Plant Men Learn how Money Matters
Many years ago in my earlier days as a Power Plant Electrician while working on Relays at the coal-fired Power Plant in North Central Oklahoma, Ben Davis, a plant electrician and True Power Man introduced me to one of his favorite Rock and Roll Bands, the “Dire Straits”. One of their hit songs is “Money For Nothing.” About 14 years later, the Power Plant Men learned exactly how to make “Money For Nothing” and other “Money Matters”!
Albert Einstein was once asked what the greatest miracle known to man is, and he replied “Compound Interest”.
Albert Einstein
One day at the Power Plant our timekeeper Linda Shiever invited a Financial Planner to come to the plant and talk to the Power Plant Men about the importance of planning ahead for your retirement. This may have been the first time many of the Power Plant Men had ever heard of such a thing as “Compound Interest”.
Linda Shiever
To a Power Plant Man, “Compound Interest” sounds more like “paying close attention when you pound something with a sledge hammer”.
The Financial Planner explained to the Power Plant Men that it is important to begin planning for the future early in your life. He gave us a sheet of paper titled “Put the Magic of compounding to work for you.” It showed how someone 25 years old investing in the stock market (S&P 500 which averages 10% annually over time) by putting $2,000 in something that gives you a 10% return for 8 years, and then stops, while another person waits 8 years until they are 33 and spends the rest of their life putting $2,000 into the same stock market they will never have as much as the person who only put in $2000 for 8 years beginning when they were 25 years old.
Let me explain this a little more: Using compound interest at 10% rate for his example (since that is what you receive in the S&P 500 over time), he showed that the person that invested $16,000 beginning at 25 years old and adding $2000 each year for only 8 years will have a net earnings of over $1,000,000 by the time they are 71 years old. Yet the person that waited 8 years and invested $78,000 by adding $2,000 each year until they are 71 will only have a net earnings of $800,000. The importance was that compound interest works best when you start early.
This is a great lesson to learn. The problem was that the majority of the audience was already well over 40 years old. There may have been one person in the room that was 25 years old, and that was only because they weren’t telling the truth about their age.
On Friday, September 6, 1996 a group of us from the plant were told to show up at a hotel conference room not far from corporate headquarters to attend a meeting that was called “Money Matters”. The other phrase they used to describe the meeting was that it was a “Root Learning” class. The reason it was called Root Learning was because the company that put the class together for the Electric Company was called Root Learning.
When we arrived, we were told which table we were going to sit. Bruce Scambler was the leader of the table where I was appointed to sit. When we were assigned seats, it was in a way that the Power Plant Men were spread out across the tables, so that we were each sitting with people from other departments in the company. I supposed right away that this was so that we could maximize the spread the Power Plant culture to others.
This turned out to be a class about how the company has problems that need to be resolved. When the class began the leader placed a poster in the middle of the table. It showed a picture of a canyon. The workers were on one side and the leaders were on the other with the managers stuck in the middle. It was very similar to this picture:
The Canyon Root Learning Map
This was an ingenious representation of the problems the company had with the management structure. The poster we had was customized for our particular company.
We talked for a couple of hours about how we could bridge the gap between management and the workers. What were some of the barriers in the tornado that kept destroying those bridges…. etc.
The following year on September 24, 1997, we attended another meeting in Enid Oklahoma where we learned about Shareholder value. The leader of my table this year was a young man from HR at Corporate Headquarters (I’ll mention this guy in a later post). This topic made more sense as it really did talk about Money this time. This time the maps they showed us had race cars on it which showed the different competing electric companies. Something like this:
The Shareholder learning map
Being the main electric company in the state, our truck was on the Regulated track. Some of the electric providers had figured out a way to go the unregulated route. Our company kept looking for ways to get on the unregulated road by offering other services that were not regulated. After looking at the poster that looked similar to the one above for a while and talking about it, we moved on to the next poster:
The second Shareholder Map
Even though the chart is the main part of this picture, most of the discussion took place around the “Expense Street” section in the picture. There was an added pie chart that was on a card that was placed on this street which showed how the expenses of the company were broken down.
The main expense for the company was Fuel. I want to say that it was close to 40% of expenses. Taxes was the next largest expense for the company. It made up somewhere around 30% of our total expenses. The rest of the expenses were the other costs to run the company. Employee wages made up around 8% of the total expenses for the company.
Employee wages was the smallest piece of the pie
It was the job of the leader at the table to explain that the cost for fuel was pretty well fixed, so we can’t do anything about that. We also can’t do anything about how much taxes the company pays. We didn’t have control over the supplies and other costs the company buys. So, the bottom line was that the little sliver of expenses for the company that represented “Employee Wages” was really the only thing we can adjust to increase shareholder value…..
What? Run that one by me again? We were a 3 billion dollar revenue company. We had around 3,000 employees which we had reduced to around 2000 employees when the Corporation Commission cut how much we could charge for electricity, and now you’re saying that the only way to keep the company afloat is to “adjust” employee wages because 92% of everything else it “out-of-bounds”? I think you can see why we spent a lot of time discussing this… This turned into a pretty lively discussion.
Learning about the “Time Value of Money” can be very helpful. I had a financial calculator that I kept at the plant. One day one of the Power Plant Men came to me and asked me to figure out how they could buy a Harley Davidson Motorcycle. Earl Frazier said that he could only afford something like $230 per month and the wanted to buy this motorcycle. How would he do that? The motorcycle cost something like $38,000 or more. I don’t remember the exact details.
A Harley Davidson Motorcycle
Sounds complicated doesn’t it? How does a Power Plant Man buy a Harley Davidson for only $230.00 per month with only a four year loan? Earl had heard that I knew all about the “Time Value of Money” and that if there was a way, I would be able to tell him how to do it. His parameters were that the cost of the motorcycle was $38,000 (I’m just guessing as I don’t remember the exact amounts), and he could only pay $230 each month.
Well. Even with a no interest loan, it would take over 13 years to pay for the motorcycle. So, my only option for solving this problem was to pull out my financial calculator:
My Texas Instrument BAII Plus Financial Calculator
This calculator allowed me to find the monthly payment quickly for a loan at a specific interest rate over a specific number of months. So, I worked backward from that point. I told Earl to come back in a couple of hours and I would let him know his options.
Earl Frazier
When Earl returned, I had his answer…. I told him this…. Each month he needed to begin putting his $230.00 into an annual CD at the bank for 5% (yeah… they had those at that time). In two and a half years, he would stop doing that. And just put his money in his regular checking account. Then 9 months later, he takes the money in his checking account and buys the Harley Davidson. This way he would put 10% down up front (because CDs would have been rolling into his account also).
Then, each month, as his CDs became available, he would roll part of them back into another year, leaving out a certain amount each time to supplement the $230.00 he would still be paying each month for his motorcycle, since his payments would be significantly higher than that. Then exactly after 4 years, he would have used up all of the money in his account just as he would be paying off his motorcycle. This would only work if he could get a loan for the motorcycle that charged 3.7% interest rate or less which was a reasonable rate at the time.
Earl responded by saying, “You mean I will have to wait 3 years before I can buy the motorcycle?!?!” Yeah. That was the bottom line… and by the end of it all, he would have to pay for the motorcycle over a 7 year period when it came down to it. He wasn’t too happy about having to wait, but that was the only way he could do it for $230 monthly payments.
Here is a side story… A few years later when I went to work for Dell, we also had Root Learning classes there as well. Here is one of the posters we used during the class:
In this picture, Dell is the big boat at the top. When I walked into the class I recognized the style of the poster right off the bat. Oh! Root Learning! This will be fun. These types of classes were a fun way to express the realities of the business and the obstacles they have to overcome to achieve their goals.
I still remember the leader at our table 13 years later. His name is Jonah Vaught. I worked with him about 5 years after that class. I acted like I knew him, and I could tell that he was wondering where we had met. So, I finally told him…. “You were the group leader when we were doing that Money Matters class back in 2002.”
End of Side story….
Now when I listen to the Dire Straits’ song “Money For Nothing” (like Paul Harvey’s “Rest of the Story”) you know what goes through my mind… First sitting in the switchgear working on relays with Ben Davis listening to Rock and Roll on the radio (see the post: “Relay Tests and Radio Quizzes with Ben Davis“).
Secondly, I remember the Power Plant Men learning the “Time Value of Money” in a fun way that kept them interested.
Thirdly, I remember Charles Lay finally realizing when he was 63 years old that he was going to have to work the rest of his life because he hadn’t been saving for retirement…. See the post “Pain in the Neck Muskogee Power Plant Relay Testing“). Some times when you learn about the Time Value of Money…. it’s too late to do anything about it because time has already run out.
How Many Power Plant Men Can You Put in a 1982 Honda Civic?
Originally Posted on September 21, 2012:
Not long after I became a full time Power Plant employee as a janitor in 1982, I began carpooling with 3 other Power Plant employees. An Electrician, Bill Rivers. A Chemist, Yvonne Taylor, and one of the new members of the Testing team, Rich Litzer. With such a diverse group, you can only imagine the types of topics that were discussed driving to and from work each day.
Bill Rivers usually talked about different absurdities that he encountered during his day as an electrician. How one hand doesn’t know what the other hand is doing, leading to some times very funny results. Yvonne Taylor would talk about her farm and something called School Land Lease that she farmed, and how she had to deal with the bureaucracy and the constantly changing laws. Rich Litzer would discuss how their newly formed team were learning new things at the plant and often had funny things to say about his encounters during the day.
Me? Occasionally I would lift up my head from the book I was reading (if I wasn’t the driver), and ask, “Would anyone like to hear about the training that we received from Johnson & Johnson about how to properly wax a floor using their top of the line wax, ShowPlace?” that didn’t usually jump to the top of the list of most interesting stories.
The Best Floor Wax money can buy!
We did use ShowPlace wax by Johnson and Johnson, and they did send a representative to our plant to teach us backward Oklahoma hick janitors how to properly care for our plain tile hallways and offices. Not the fancy tile like they have these days. If you are over 50 years old, then it is probably the same type of tile that you had on the floors of your school if you went to the standard brick public elementary school like the one I used to attend.
The office area floors were sure shiny after we applied a healthy dose of ShowPlace on them. The Johnson and Johnson rep. taught us how to properly buff the floor and showed us how a properly buffed floor that was really shiny was actually less slick than a badly waxed floor.
Anyway, I digress. Waxing floors is usually something that I tend to ramble about when I have an audience that shows interest in it (which I’m still trying to find). Since I can’t see your expression, I can only suspect that you would like to hear more about Power Plant floor waxing techniques, so I just might indulge you later on in this post after I have talked about the three other people in the car.
When it was my turn to drive to work, everyone had to climb into my 1982 Honda Civic:
A 1982 Honda Civic
Bill Rivers was about 10 years younger than my father and I know he had at least 6 children (I think). Maybe more. He told me once that even he lost count. Before he came to work at the Power Plant, he lived in Columbia, Missouri (while I had lived there, coincidentally), and worked at a Tool and Die manufacturing plant.
He worked so much overtime that one day he came home and sat down to eat dinner and sitting across from him at the table was a young boy that he didn’t recognize. He figured that he was a friend one of his own kids had invited to supper, so he asked him, “What’s your name?” Come to find out, it was one of his own children.
Bill had spent so little time at home that he didn’t even recognize his own child because his children were growing up and he was missing it. Mainly because he worked so much overtime. That was when Bill decided to move to Oklahoma and go to work at the power plant. Probably at the same time when I had moved to work there also, and was still going back to Columbia to finish college before becoming a full fledged bonafide Power plant Janitor.
Bill Rivers always seemed to be having fun, and usually at the expense of someone else. He was constantly playing jokes on someone, and his most common target was Sonny Kendrick, the Electrical Specialist. Sonny was somewhat gullible, and so, Bill would weave some very complicated stories together to draw Sonny’s attention and string it along until Sonny was totally believing something preposterous.
Sonny Kendrick
Sonny wasn’t gullible like Curtis Love was gullible. Sonny knew that Bill Rivers was always trying to pull something over on him. So, Bill would just see how far along he could string Sonny until Sonny realized that everything Bill was saying was just made up in his head. — Then Bill Rivers would spend the rest of the week chuckling about it. Which usually aggravated Sonny to no end.
Sonny Kendrick was the only Electrical Specialist at the plant. I suppose he had some electronics training that allowed him to hold that honored position. His real name is Franklin Floyd Kendrick. I first met Sonny when I was the janitor for the Electric Shop.
People would call him “Baby Huey”. Since I didn’t know who Baby Huey was, I just figured that it was some character that reminded them of Sonny. So, when I had the opportunity, I looked up Baby Huey (this was a number of years before the Internet). I still wasn’t sure why, unless they were talking about a different Baby Huey:
I didn’t really get the connection, unless it had something to do with the diaper or the facial expression
Bill Rivers had a son that was in High School at the time, and he had the same Algebra teacher that by brother Greg had when he was trying to learn Algebra. The teacher had a real problem teaching algebra to high school students, and Bill asked me if I would tutor his son in Algebra.
When I first met Bill’s son, (I think his name was either Jerard or Bryan, I don’t remember now), his life ambition was to graduate from High School and work as a mechanic in an auto garage and drive motorcycles. I tried to show him how interesting and fun Algebra and Math in general could be, so each time I went to meet with him, I would bring him either a math puzzle or a book with a story about a mathematician, or a neat Mathematical oddity… such as imaginary numbers, and things like that.
Later, long after Bill had moved to another Power Plant in Konawa, Oklahoma, I saw Bill, and he told me that he his son was working toward becoming a dentist. I don’t know if he was ever able to fulfill his dream, but when I visit Oklahoma, I keep my eye out for a guy on a motorcycle with a Dentist symbol on the back of his Harley Davidson jacket. Because that would probably be him.
The Dental Symbol. it would probably look good on a Harley Jacket, don’t you think?
Anyway, while the four of us were carpooling together, the person that did the most talking was Yvonne Taylor. Now, I like Yvonne Taylor. I liked her a lot. But she was the main reason why I was never able to practice my Ramblin’ Ann rambles (See the post “Ed Shiever Trapped in a Confined Space With a Disciple of Ramblin’ Ann“) because she was usually in the midst of exercising her right to ramble as well.
Since she was my elder, (almost my mother’s age), I always let her go first, which usually meant there wasn’t much of a chance for anyone to go second. I finally just decided this would be a great time to read. So I started reading books about different sorts of religions around the world. With the Bhagavad Gita being one of my favorite ones.
I always had a certain attraction to Yvonne, because she had a son named Kevin (which is my name), and a daughter named Kelley (My girlfirend’s name at the time was Kelly, now she is my wife). And her son and daughter were about the same age as my future wife and I were.
In the midst of rambles emanating from Yvonne, I would look up every time I would hear, “Kelley said this, or Kevin said that….” She did say one thing one time that I have always remembered and I have tried to follow. Yvonne said that you never want to buy a house that is West of the place where you work. Especially if it is any distance away.
I believe it was when she lived in Michigan, she had to drive a long way East every day, and the sun was glaring in her eyes all the way to work. Then when she had to drive home going West in the evening, the sun was glaring in her eyes as it was going down. So, when you live West of your workplace, you have to drive with the sun in your eyes every day, both ways, and you just pray and pray for rain or at least a cloudy day.
I didn’t know it at the time, but Yvonne’s husband, Pat, had a dad with last name Taylor (obviously), and his mom’s Maiden Name was Songer. My Grandmother’s last name is Taylor (by marriage), and my wife Kelly has a Grandmother who’s maiden name was Songer. So there was that as well.
Unfortunately for Yvonne, was that by the time we arrived at the plant in the morning, she was usually slightly hoarse. I don’t know if it was the morning air… or maybe… it could have possibly been the rambling…. So, when she would have to page someone on the PA system (The Gaitronics Gray Phone), she sounded a little bit like the wicked witch. Just like some clothes can cause someone to look fatter than other clothes, the Gray Phone system had a tendency to make one’s voice more “tinny” than it actually is. Especially if your voice is hoarse, and high pitched already.
Gaitronics Gray Phone
So, whenever I heard Yvonne paging someone and I was in the Electric shop or with the janitor crew, I would say, “Yvonne just has the sexiest voice I’ve ever heard. I can’t hardly Stand it!!” Those who were hearing me for the first time would give me a look like I must be crazy. And Well… who knows for sure. I think the Electricians knew for sure.
Rich Litzer lived just up the street from me, so I would drive by his house and pick him up, or I would park my car at his house and we would take his car, and we would meet Bill Rivers and Yvonne Taylor at the local Bowling Alley, since it was on the main drag out of town on Washington Street in Stillwater, Oklahoma.
Rich was a great guy to carpool with because he usually had a lighthearted story to tell about something that happened at home, or we would talk about something else equally not serious. Later he was relocated downtown in Corporate Headquarters, and I didn’t see him for a long time.
Then one day, Rich and Ron Madron came down to Austin, Texas (where I live now) after I had moved down to work for Dell, to go to a school or conference, and I was able to meet them for dinner. That was the last time I saw Rich or Ron, and that was about 9 or 10 years ago.
At this point I was going to rambl… I mean…. talk more about how we used to wax the floor when I was a janitor, however, I have decided to leave that for another post “Wax On, Wax Off and other Power Plant Janitorial Secrets“.
Today when I finally found out that the post I was going to write was about my carpooling with Bill Rivers, Yvonne Taylor and Rich Litzer, I went to the Internet and looked up the latest news on my old friends. To my surprise, I found that Yvonne’s husband Patrick, died on September 12, just 9 days ago.
I don’t think I ever met Patrick in person, however, I used to hear about his daily activities for the 2 1/2 years from October 1982 through December 1985 when I used to carpool with Yvonne. Learning about Patrick’s death has saddened me because I know how much Yvonne loved and cared for Patrick. I know she has four sons and two daughters that are there to comfort her. I offer Yvonne my condolences and I wish her all the best.
Yvonne Taylor’s husband the past 52 years, Patrick Taylor
Comment from Previous Post:
-
Great story, Kevin! I’ll bet you didn’t know I used to run a floor scrubber-/polisher. Yep – at the big TG&Y store in Shepherd Mall (OKC). I helped in opening the store in 1964 and continued working there for a couple of years as a “Stock Boy”.
Why Stanley Elmore and Other Power Plant Questions
Originally posted September 7, 2012:
Why Stanley Elmore? I suppose that was on the mind of a few Power Plant Men when the foreman for the new Automotive Garage and Yard crew was chosen in 1980. What did Stanley have that the rest of the Power Plant Men lacked? Why did Stanley accept such a position in a power plant out in the middle of nowhere in the plains of Oklahoma? I have some thoughts about these questions and others that I will share with the rest of the Power Plant Kingdom.
When I returned to the Power Plant for my second summer as a summer help in 1980, I found that the Automotive Garage had been finished and a new crew had been assigned to work from this shop. Doug House, Jim Heflin, Larry Riley and Ken Conrad were there to welcome me. I had only known Larry from the year before and when he saw that I was returning, he actually said he was glad to see me. It was usually hard to tell what Larry was thinking because he kept face even when he was chuckling under his breath. So, I never really knew what he thought about me until he told the others that he was glad that I would be working there this summer.
Then the new foreman walked in. He was a medium height stocky man that had obviously come from another plant and was well seasoned in the ways of Power Plant etiquette. This required him to act as if I had just walked into a snake pit and my summer was going to be a living Hell working under him. Of course I accepted this well, knowing that this merely meant that he had a lot for us to do during the summer and I should enjoy myself.
There was another summer help there, David Foster. He had been hired because he had experience driving a Tractor, and he would spend a lot of the time that summer mowing grass. That is, until he wrecked a new brush hog while going perpendicular across a ditch at too high rate of speed.
Almost Like this without the safety guards and just about as new
(Boy, I’m getting a lot of mileage out of that one picture of a Brush Hog). At that point, he started working on watering the grass, as I did (and you can read about that in the post “When Power Plant Men Talk, It Pays to Listen“).
A short time after I had been there I realized that there was another resident of the garage. It was Don Pierce that came from Construction to operate the P&H Crane used by the Plant. Here is a Picture of the same kind of P&H Crane that Don Pierce operated for at least two of the summers that I was working out of the Garage.
A P&H Crane, just like the one at the plant
Don Pierce was a tall person with a moustache and tinted glasses. He was chewing something often that he spit into a cup or a Coke can, that made a squeaky squirty sound each time he spit. He always looked like to me like he wore the same size jeans that he wore when he graduated from High School, even though the rest of him had filled out some. Making him look like his upper body had been squeezed some out of his jeans. Like Hank Hil in King of the Hill:
Don had too tight jeans like this only his belt buckle was much bigger
It didn’t take long to figure out that Stanley Elmore loved to play jokes on people. He would get the biggest laugh from causing someone a moment of confusion. He would shake his head and laugh and say, “oooooohhh weeee” (or something similar). I always had a bigger kick out of watching Stanley’s reaction to someone encountering his joke than I did from the joke itself. As you may have learned from an earlier post “Power Plant Painting Lessons with Aubrey Cargill“, that I was the target of at least some of his jokes. It would make me laugh to know what Stanley was playing a joke on me.
Actually, anytime during my time at the plant it made me laugh to find that someone was playing a joke on me. I remember while I was a janitor that one day while I was cleaning out the bathroom in the Electric Shop, I would first Sweep out the bathroom and then mop it. Each time I turned around to pick up something that was sitting just outside the door of the bathroom, I found that something had moved.
Like the mop bucket had moved down to the door by the lab. Everyone in the shop was just doing their normal job. But when I walked out of the bathroom to find the handle missing from the push broom and Andy Tubbs and Ben Davis sitting at the break table acting like nothing was wrong, I had to walk back into the bathroom in order to keep them from seeing how hard I was laughing.
For some reason that was the funniest joke I encountered. To turn around in one moment and have the broom handle gone and the broom itself just sitting on the floor with no handle and the obvious culprit Andy Tubbs trying his best to keep a straight face and act like he wasn’t noticing anything. I still laugh when I think about it 30 years later.
Stanley’s jokes were of that caliber. When Don Pierce drove to work one day on his new Harley Davidson Motorcycle, Stanley just couldn’t resist. He started out by asking him if he noticed that it leaked oil. Don said it better not, because he just bought it brand new. Stanley answered by saying that Harley Davidsons always leaked oil.
A Harley Davidson similar to the one Don Pierce had
So, while Don was out operating the P&H Crane, Stanley took a small cup of oil and poured a little oil spot under his motorcycle, just as a reminder to Don that all Harleys in 1980 leaked oil. Then Stanley watched and waited for Don to stroll by his motorcycle in the parking lot during lunch to see what his reaction would be. Of course, Don had been an Electric Company Construction worker long enough to spot a snow job when he saw a grease spot. But it did make him smile to know that Stanley had gone through the trouble of putting an oil spot under his motorcycle. — That’s one way to know that someone really cares about you. They are willing to take the time out of their busy day to play a little power plant joke on you.
I was able to work one-on-one with Don Pierce for about a week that summer when we had to go to the laydown yard by the main gate and organize all the spare cable, rebar, piping, et cetera into neat rows and in some kind of order like from largest to smallest. In order to put the large reels of cable into neat rows, we would line up two rows of very large telephone poles close to each other, and then place the reels on the poles to keep them off of the ground so they would last longer, and not sink into the ground when it rained.
To give you an idea. Some of the wooden reels were taller than me
Don was operating the crane and I was doing my best to use the newly learned hand signals to direct him where to go and what to do. There was a hand signal for everything, and I was afraid that if I stopped to itch my nose, Don would cut the engine and leave for lunch.
I had been studying this chart during break before we went to the laydown yard
We were picking up wooden telephone poles and carefully placing them in a line, and I was standing there guiding the poles into place as they were lowered to the ground. At one point, I had signaled Don to lower the pole all the way to the ground and as I turned to undo the chokers from under the poles, I realized that the pole had been placed right on top of my feet, and I couldn’t move. It was at times like that when I was glad that I was wearing Steel Toed Boots. — A must when you are working in a power plant.
Steel Toed Boots
So, finding myself stuck, I straightened myself up and signaled to Don that I wanted him to raise the pole up. He looked a little confused as if he thought I had given him the wrong signal (again…). But when I didn’t change my signal, he succumbed and raised the pole off the ground. At that point, I took one step backward and with the straightest face I could muster, I signaled for Don to lower the pole back to the ground. I saw the smile go across Don’s face when he finally realized that I had been held captive by the pole, and I smiled back because at that point, I couldn’t look serious, and what would be the point anyway.
During the first summer that Stanley was my foreman, I carpooled with him and 5 others. We would all pile into Stanley’s station wagon and head home at the end of the day. I would be dropped off at the corner of Washington and Lakeview Dr. in Stillwater and would walk the rest of the way home, about a mile down the road and across a field to my parent’s house. We each paid Stanley $5.00 each week for the ride, and we didn’t have to worry about the gas and the driving. It was left up to Stanley.
So, why Stanley? That was the question I was going to answer when I started this post. Well. I think I have a good reason. All during the summer, Stanley was studying different types of weed killers that could be used around the lake without causing harm to the lake itself. He was very conscious about keeping the lake pristine and free from poisonous chemicals.
He finally found a weed killer that was approved by the department of Agriculture at Oklahoma State University in Stillwater to be used around lakes. By Stanley’s conscientious view of the Power Plant Property, I could see that he was a good choice for supervising the yard crew. We did spend many hours driving down the roadways spraying the newly mowed and chopped weeds with weed killer with the knowledge that we weren’t causing more harm than good.
But that wasn’t the only reason. I think Stanley was put over the garage crew because he took such great care with his own vehicles. I had the opportunity to see the engine in the station wagon that ferried us to work and home each day, and when I first saw it, I was astounded. The entire engine was cleaned and polished and even waxed!
Shiny like this engine is shiny
Even though the engine had over 100,000 miles on it, it looked brand new. Stanley said that he keeps his engine spotless so that at the first sign of any kind of leak, he takes the steps necessary to fix it before it becomes a real problem.
I remember one Monday morning while we were on the way to work, and the Power Plant Men in the car, which included John Blake and another inspector, were talking about what they did over the weekend. Stanley said that he spent all day Saturday cleaning his car. I knew what he meant. That included waxing his engine.
I had the opportunity to go to Stanley’s house one day to drop something off or pick something up, I don’t remember, but what I do remember is that when I arrived at his humble abode, the front yard, as small and normal as the rest of the neighborhood, was so well groomed. It looked like someone had taken a scissors and carefully clipped all of the blades of grass just the right height. The various rocks and bird bath, and other yard ornaments were placed so perfectly that it had transformed this normal little yard into a complete work of art.
A yard not near as perfect as Stanley’s
So, why was Stanley chosen to be the foreman over the yard crew and the Automotive garage? I believe it was because he had demonstrated by the way he took care of his own property that those in the Electric Company who knew that, knew that he was a man that would take care of their property equally as well. So, I salute Stanley for being a great foreman to work for, and never letting the work seem dull. He treated everyone in the shop with respect (except maybe in the middle of a joke). I wish I had a picture to show you, because I was unable to think of any actor or historical figure that reminds me of him. There just isn’t anyone else quite like Stanley.
Comments from the original Post:
Powerplant jokes are the greatest! I remember one time I was going on vacation (as a Control Room Operator) and my assistant was filling in for me for the first time (let’s call him “Dave”) well, anyway the Shift Supervisor asked me if I felt Dave was up to the task (Dave is an excellant operator). I told the Supervisor I had faith in Dave, but he should keep a close eye on him, so the whole time I was on vacation, the Supervisor hovered over Dave’s shoulder like a buzzing mosquito! And to add icing to the cake, on Dave’s performance appraisal the Supervisor wrote “Dave is a competent operator…but needs a little too much personal supervision!!
This is the kind of fun powerplant men have with each other, no one is closer than a CO and his assistant, and Dave was, and always will be a great friend. We’ve been to each others weddings & helped each other through divorces. He’s a Control Room Operator of his own crew now, but we still get a kick out of laughing over the good times we had working together.
A book could/should be written on all the classic power plant jokes over the years. Some of the oldest I’ve heard from the Osage and Belle Isle vintage power plant men.
Something that comes through these stories: There existed in those days a very different attitude toward both one’s work and one’s coworkers, at least in industrial settings. I found it in both aircraft manufacturing and the telephone business.
It doesn’t seem to exist today or at least, isn’t obvious and I think that represents an unfortunate loss to our society…
Steel toed boots are a great safety idea around a power plant. One of the employee benefits I enjoyed while working at the WFEC Hugo power plant was a new pair of steel toed boots every year. I’ve still got a pair of them. I wore them last May while clearing tornado debris in Moore, OK. And I gave a pair to my grandson. He wears them everywhere (even to church!).
Thanks for these memories, Kevin. They’re great!
Power Plant Men Learn how Money Matters
Many years ago in my earlier days as a Power Plant Electrician while working on Relays at the coal-fired Power Plant in North Central Oklahoma, Ben Davis, a plant electrician and True Power Man introduced me to one of his favorite Rock and Roll Bands, the “Dire Straits”. One of their hit songs is “Money For Nothing.” About 14 years later, the Power Plant Men learned exactly how to make “Money For Nothing” and other “Money Matters”!
Albert Einstein was once asked what the greatest miracle known to man is, and he replied “Compound Interest”.
Albert Einstein
One day at the Power Plant our timekeeper Linda Shiever invited a Financial Planner to come to the plant and talk to the Power Plant Men about the importance of planning ahead for your retirement. This may have been the first time many of the Power Plant Men had ever heard of such a thing as “Compound Interest”.
Linda Shiever
To a Power Plant Man, “Compound Interest” sounds more like “paying close attention when you pound something with a sledge hammer”.
The Financial Planner explained to the Power Plant Men that it is important to begin planning for the future early in your life. He gave us a sheet of paper titled “Put the Magic of compounding to work for you.” It showed how someone 25 years old investing in the stock market (S&P 500 which averages 10% annually over time) by putting $2,000 in something that gives you a 10% return for 8 years, and then stops, while another person waits 8 years until they are 33 and spends the rest of their life putting $2,000 into the same stock market they will never have as much as the person who only put in $2000 for 8 years beginning when they were 25 years old.
Let me explain this a little more: Using compound interest at 10% rate for his example (since that is what you receive in the S&P 500 over time), he showed that the person that invested $16,000 beginning at 25 years old and adding $2000 each year for only 8 years will have a net earnings of over $1,000,000 by the time they are 71 years old. Yet the person that waited 8 years and invested $78,000 by adding $2,000 each year until they are 71 will only have a net earnings of $800,000. The importance was that compound interest works best when you start early.
This is a great lesson to learn. The problem was that the majority of the audience was already well over 40 years old. There may have been one person in the room that was 25 years old, and that was only because they weren’t telling the truth about their age.
On Friday, September 6, 1996 a group of us from the plant were told to show up at a hotel conference room not far from corporate headquarters to attend a meeting that was called “Money Matters”. The other phrase they used to describe the meeting was that it was a “Root Learning” class. The reason it was called Root Learning was because the company that put the class together for the Electric Company was called Root Learning.
When we arrived, we were told which table we were going to sit. Bruce Scambler was the leader of the table where I was appointed to sit. When we were assigned seats, it was in a way that the Power Plant Men were spread out across the tables, so that we were each sitting with people from other departments in the company. I supposed right away that this was so that we could maximize the spread the Power Plant culture to others.
This turned out to be a class about how the company has problems that need to be resolved. When the class began the leader placed a poster in the middle of the table. It showed a picture of a canyon. The workers were on one side and the leaders were on the other with the managers stuck in the middle. It was very similar to this picture:
The Canyon Root Learning Map
This was an ingenious representation of the problems the company had with the management structure. The poster we had was customized for our particular company.
We talked for a couple of hours about how we could bridge the gap between management and the workers. What were some of the barriers in the tornado that kept destroying those bridges…. etc.
The following year on September 24, 1997, we attended another meeting in Enid Oklahoma where we learned about Shareholder value. The leader of my table this year was a young man from HR at Corporate Headquarters (I’ll mention this guy in a later post). This topic made more sense as it really did talk about Money this time. This time the maps they showed us had race cars on it which showed the different competing electric companies. Something like this:
The Shareholder learning map
Being the main electric company in the state, our truck was on the Regulated track. Some of the electric providers had figured out a why to go the unregulated route. Our company kept looking for ways to get on the unregulated road by offering other services that were not regulated. After looking at the poster that looked similar to the one above for a while and talking about it, we moved on to the next poster:
The second Shareholder Map
Even though the chart is the main part of this picture, most of the discussion took place around the “Expense Street” section in the picture. There was an added pie chart that was on a card that was placed on this street which showed how the expenses of the company were broken down.
The main expense for the company was Fuel. I want to say that it was close to 40% of expenses. Taxes was the next largest expense for the company. It made up somewhere around 30% of our total expenses. The rest of the expenses were the other costs to run the company. Employee wages made up around 8% of the total expenses for the company.
Employee wages was the smallest piece of the pie
It was the job of the leader at the table to explain that the cost for fuel was pretty well fixed, so we can’t do anything about that. We also can’t do anything about how much taxes the company pays. We didn’t have control over the supplies and other costs the company buys. So, the bottom line was that the little sliver of expenses for the company that represented “Employee Wages” was really the only thing we can adjust to increase shareholder value…..
What? Run that one by me again? We were a 3 billion dollar revenue company. We had around 3,000 employees which we had reduced to around 2000 employees when the Corporation Commission cut how much we could charge for electricity, and now you’re saying that the only way to keep the company afloat is to “adjust” employee wages because 92% of everything else it “out-of-bounds”? I think you can see why we spent a lot of time discussing this… This turned into a pretty lively discussion.
Learning about the “Time Value of Money” can be very helpful. I had a financial calculator that I kept at the plant. One day one of the Power Plant Men came to me and asked me to figure out how they could buy a Harley Davidson Motorcycle. Earl Frazier said that he could only afford something like $230 per month and the wanted to buy this motorcycle. How would he do that? The motorcycle cost something like $38,000 or more. I don’t remember the exact details.
A Harley Davidson Motorcycle
Sounds complicated doesn’t it? How does a Power Plant Man buy a Harley Davidson for only $230.00 per month with only a four year loan? Earl had heard that I knew all about the “Time Value of Money” and that if there was a way, I would be able to tell him how to do it. His parameters were that the cost of the motorcycle was $38,000 (I’m just guessing as I don’t remember the exact amounts), and he could only pay $230 each month.
Well. Even with a no interest loan, it would take over 13 years to pay for the motorcycle. So, my only option for solving this problem was to pull out my financial calculator:
My Texas Instrument BAII Plus Financial Calculator
This calculator allowed me to find the monthly payment quickly for a loan at a specific interest rate over a specific number of months. So, I worked backward from that point. I told Earl to come back in a couple of hours and I would let him know his options.
Earl Frazier
When Earl returned, I had his answer…. I told him this…. Each month he needed to begin putting his $230.00 into an annual CD at the bank for 5% (yeah… they had those at that time). In two and a half years, he would stop doing that. And just put his money in his regular checking account. Then 9 months later, he takes the money in his checking account and buys the Harley Davidson. This way he would put 10% down up front (because CDs would have been rolling into his account also).
Then, each month, as his CDs became available, he would roll part of them back into another year, leaving out a certain amount each time to supplement the $230.00 he would still be paying each month for his motorcycle, since his payments would be significantly higher than that. Then exactly after 4 years, he would have used up all of the money in his account just as he would be paying off his motorcycle. This would only work if he could get a loan for the motorcycle that charged 3.7% interest rate or less which was a reasonable rate at the time.
Earl responded by saying, “You mean I will have to wait 3 years before I can buy the motorcycle?!?!” Yeah. That was the bottom line… and by the end of it all, he would have to pay for the motorcycle over a 7 year period when it came down to it. He wasn’t too happy about having to wait, but that was the only way he could do it for $230 monthly payments.
Here is a side story… A few years later when I went to work for Dell, we also had Root Learning classes there as well. Here is one of the posters we used during the class:
In this picture, Dell is the big boat at the top. When I walked into the class I recognized the style of the poster right off the bat. Oh! Root Learning! This will be fun. These types of classes were a fun way to express the realities of the business and the obstacles they have to overcome to achieve their goals.
I still remember the leader at our table 13 years later. His name is Jonah Vaught. I worked with him about 5 years after that class. I acted like I knew him, and I could tell that he was wondering where we had met. So, I finally told him…. “You were the group leader when we were doing that Money Matters class back in 2002.”
End of Side story….
Now when I listen to the Dire Straits’ song “Money For Nothing” (like Paul Harvey’s “Rest of the Story”) you know what goes through my mind… First sitting in the switchgear working on relays with Ben Davis listening to Rock and Roll on the radio (see the post: “Relay Tests and Radio Quizzes with Ben Davis“).
Secondly, I remember the Power Plant Men learning the “Time Value of Money” in a fun way that kept them interested.
Thirdly, I remember Charles Lay finally realizing when he was 63 years old that he was going to have to work the rest of his life because he hadn’t been saving for retirement…. See the post “Pain in the Neck Muskogee Power Plant Relay Testing“). Some times when you learn about the Time Value of Money…. it’s too late to do anything about it because time has already run out.
Power Plant Men 
Great story, Kevin! I’ll bet you didn’t know I used to run a floor scrubber-/polisher. Yep – at the big TG&Y store in Shepherd Mall (OKC). I helped in opening the store in 1964 and continued working there for a couple of years as a “Stock Boy”.