Originally posted September 7, 2012:
Why Stanley Elmore? I suppose that was on the mind of a few Power Plant Men when the foreman for the new Automotive Garage and Yard crew was chosen in 1980. What did Stanley have that the rest of the Power Plant Men lacked? Why did Stanley accept such a position in a power plant out in the middle of nowhere in the plains of Oklahoma? I have some thoughts about these questions and others that I will share with the rest of the Power Plant Kingdom.
When I returned to the Power Plant for my second summer as a summer help in 1980, I found that the Automotive Garage had been finished and a new crew had been assigned to work from this shop. Doug House, Jim Heflin, Larry Riley and Ken Conrad were there to welcome me. I had only known Larry from the year before and when he saw that I was returning, he actually said he was glad to see me. It was usually hard to tell what Larry was thinking because he kept a straight face even when he was chuckling under his breath. So, I never really knew what he thought about me until he told the others that he was glad that I would be working there this summer.
Then the new foreman walked in. He was a medium height stocky man that had obviously come from another plant and was well seasoned in the ways of Power Plant etiquette. This required him to act as if I had just walked into a snake pit and my summer was going to be a living Hell working under him. Of course I accepted this well knowing that this merely meant that he had a lot for us to do during the summer and I should enjoy myself.
There was another summer help there, David Foster. He had been hired because he had experience driving a Tractor, and he would spend a lot of the time that summer mowing grass. That is, until he wrecked a new brush hog while going perpendicular across a ditch at too high rate of speed.
(Boy, I’m getting a lot of mileage out of that one picture of a Brush Hog). At that point, he started working on watering the grass, as I did (and you can read about that in the post “When Power Plant Men Talk, It Pays to Listen“).
A short time after I had been there I realized that there was another resident of the garage. It was Don Pierce that came from Construction to operate the P&H Crane used by the Plant. Here is a Picture of the same kind of P&H Crane that Don Pierce operated for at least two of the summers that I was working out of the Garage.
Don Pierce was a tall person with a moustache and tinted glasses. He was chewing something often that he spit into a cup or a Coke can, that made a squeaky squirty sound each time he spit. He always looked to me like he wore the same size jeans that he wore when he graduated from High School, even though the rest of him had filled out some. Making him look like his upper body had been squeezed some out of his jeans. Like Hank Hill in King of the Hill:
It didn’t take long to figure out that Stanley Elmore loved to play jokes on people. He would get the biggest laugh from causing someone a moment of confusion. He would shake his head and laugh and say, “oooooohhh weeee” (or something similar). I always had a bigger kick out of watching Stanley’s reaction to someone encountering his joke than I did from the joke itself. As you may have learned from an earlier post “Power Plant Painting Lessons with Aubrey Cargill“, that I was the target of at least some of his jokes. It would make me laugh to know that Stanley was playing a joke on me.
Actually, anytime during my time at the plant it made me laugh to find that someone was playing a joke on me. I remember while I was a janitor that one day while I was cleaning out the bathroom in the Electric Shop, I would first Sweep out the bathroom and then mop it. Many times I turned around to pick up something that was sitting just outside the door of the bathroom I found that it had moved.
Like the mop bucket had moved down to the door by the lab. Everyone in the shop was just doing their normal job. But when I walked out of the bathroom to find the handle missing from the push broom and Andy Tubbs and Ben Davis sitting at the break table acting like nothing was wrong, I had to walk back into the bathroom in order to keep them from seeing how hard I was laughing.
For some reason that was the funniest joke I encountered. To turn around in one moment and have the broom handle gone and the broom itself just sitting on the floor with no handle and the obvious culprit Andy Tubbs trying his best to keep a straight face and act like he wasn’t noticing anything. I still laugh when I think about it 30 years later.
Stanley’s jokes were of that caliber. When Don Pierce drove to work one day on his new Harley Davidson Motorcycle, Stanley just couldn’t resist. He started out by asking him if he noticed that it leaked oil. Don said it better not, because he just bought it brand new. Stanley answered by saying that Harley Davidsons always leaked oil.
So, while Don was out operating the P&H Crane, Stanley took a small cup of oil and poured a little oil spot under his motorcycle, just as a reminder to Don that all Harleys in 1980 leaked oil. Then Stanley watched and waited for Don to stroll by his motorcycle in the parking lot during lunch to see what his reaction would be. Of course, Don had been an Electric Company Construction worker long enough to spot a snow job when he saw a grease spot. But it did make him smile to know that Stanley had gone through the trouble of putting an oil spot under his motorcycle. — That’s one way to know that someone really cares about you. They are willing to take the time out of their busy day to play a little power plant joke on you.
I was able to work one-on-one with Don Pierce for about a week that summer when we had to go to the laydown yard by the main gate and organize all the spare cable, rebar, piping, et cetera into neat rows and in some kind of order like from largest to smallest. In order to put the large reels of cable into neat rows, we would line up two rows of very large telephone poles close to each other, and then place the reels on the poles to keep them off of the ground so they would last longer, and not sink into the ground when it rained.
Don was operating the crane and I was doing my best to use the newly learned hand signals to direct him where to go and what to do. There was a hand signal for everything, and I was afraid that if I stopped to itch my nose, Don would cut the engine and leave for lunch.
We were picking up wooden telephone poles and carefully placing them in a line, and I was standing there guiding the poles into place as they were lowered to the ground. At one point, I had signaled Don to lower the pole all the way to the ground and as I turned to undo the chokers from under the poles, I realized that the pole had been placed right on top of my feet, and I couldn’t move. It was at times like that when I was glad that I was wearing Steel Toed Boots. — A must when you are working in a power plant.
So, finding myself stuck, I straightened myself up and signaled to Don that I wanted him to raise the pole up. He looked a little confused as if he thought I had given him the wrong signal (again…). But when I didn’t change my signal, he succumbed and raised the pole off the ground. At that point, I took one step backward and with the straightest face I could muster, I signaled for Don to lower the pole back to the ground. I saw the smile go across Don’s face when he finally realized that I had been held captive by the pole, and I smiled back because at that point, I couldn’t look serious, and what would be the point anyway.
During the first summer that Stanley was my foreman, I carpooled with him and 5 others. We would all pile into Stanley’s station wagon and head home at the end of the day. I would be dropped off at the corner of Washington and Lakeview Dr. in Stillwater and would walk the rest of the way home, about a mile down the road and across a field to my parent’s house. We each paid Stanley $5.00 each week for the ride, and we didn’t have to worry about the gas and the driving. It was left up to Stanley.
So, why Stanley? That was the question I was going to answer when I started this post. Well. I think I have a good reason. All during the summer, Stanley was studying different types of weed killers that could be used around the lake without causing harm to the lake itself. He was very conscious about keeping the lake pristine and free from poisonous chemicals.
He finally found a weed killer that was approved by the department of Agriculture at Oklahoma State University in Stillwater to be used around lakes. By Stanley’s conscientious view of the Power Plant Property, I could see that he was a good choice for supervising the yard crew. We did spend many hours driving down the roadways spraying the newly mowed and chopped weeds with weed killer with the knowledge that we weren’t causing more harm than good.
But that wasn’t the only reason. I think Stanley was put over the garage crew because he took such great care with his own vehicles. I had the opportunity to see the engine in the station wagon that ferried us to work and home each day, and when I first saw it, I was astounded. The entire engine was cleaned and polished and even waxed!
Even though the engine had over 100,000 miles on it, it looked brand new. Stanley said that he keeps his engine spotless so that at the first sign of any kind of leak, he takes the steps necessary to fix it before it becomes a real problem.
I remember one Monday morning while we were on the way to work, and the Power Plant Men in the car, which included John Blake and another inspector, were talking about what they did over the weekend. Stanley said that he spent all day Saturday cleaning his car. I knew what he meant. That included waxing his engine.
I had the opportunity to go to Stanley’s house one day to drop something off or pick something up, I don’t remember, but what I do remember is that when I arrived at his humble abode, the front yard, as small and normal as the rest of the neighborhood, was so well groomed. It looked like someone had taken a scissors and carefully clipped all of the blades of grass just the right height. The various rocks and bird bath, and other yard ornaments were placed so perfectly that it had transformed this normal little yard into a complete work of art.
So, why was Stanley chosen to be the foreman over the yard crew and the Automotive garage? I believe it was because he had demonstrated by the way he took care of his own property that those in the Electric Company who knew that, knew that he was a man that would take care of their property equally as well. So, I salute Stanley for being a great foreman to work for, and never letting the work seem dull. He treated everyone in the shop with respect (except maybe in the middle of a joke). I wish I had a picture to show you, because I was unable to think of any actor or historical figure that reminds me of him. There just isn’t anyone else quite like Stanley.
Stanley died at too young of an age.
Comments from the original Post:
Power plant jokes are the greatest! I remember one time I was going on vacation (as a Control Room Operator) and my assistant was filling in for me for the first time (let’s call him “Dave”) well, anyway the Shift Supervisor asked me if I felt Dave was up to the task (Dave is an excellent operator). I told the Supervisor I had faith in Dave, but he should keep a close eye on him, so the whole time I was on vacation, the Supervisor hovered over Dave’s shoulder like a buzzing mosquito! And to add icing to the cake, on Dave’s performance appraisal the Supervisor wrote “Dave is a competent operator…but needs a little too much personal supervision!!
This is the kind of fun power plant men have with each other, no one is closer than a CO and his assistant, and Dave was, and always will be a great friend. We’ve been to each others weddings & helped each other through divorces. He’s a Control Room Operator of his own crew now, but we still get a kick out of laughing over the good times we had working together.
A book could/should be written on all the classic power plant jokes over the years. Some of the oldest I’ve heard from the Osage and Belle Isle vintage power plant men.
Something that comes through these stories: There existed in those days a very different attitude toward both one’s work and one’s coworkers, at least in industrial settings. I found it in both aircraft manufacturing and the telephone business.
It doesn’t seem to exist today or at least, isn’t obvious and I think that represents an unfortunate loss to our society…
Originally Posted October 5, 2012:
The Coal Fired Power Plant where I worked first as a summer help, then as a janitor, a labor crew hand and finally as an Electrician is located about 20 miles north of Stillwater, Oklahoma. It just so happened that Oklahoma State University in Stillwater has one of the leading Fire Protection and Safety schools in the country. They offer Fire Service Training for companies who need to train their employees how to fight fires. As a summer help I was fortunate enough to take the onsite training that they provided at the power plant about every other summer to train the employees how to put out difficult fires.
It does sound like a good idea considering that there was all this coal laying around that had the habit of spontaneously igniting into smouldering embers that could easily lead to a large raging ball of flames. In fact, the Coal Yard heavy equipment operators had to drive their large dirt movers over and over the coal on the coal pile to pack it down because if it was exposed to too much air, it would develop hot spots that would turn into smoldering piles of coal that were nearly impossible to put out.
I have seen a spot smoldering on the coal pile where a water wagon would drench it with water over and over. That only seemed to keep it from spreading as fast. The only way to deal with it was to drag the burning coal off of the pile and let it burn itself out.
You would think that the OSU Fire Training Service would do a good job of teaching the employees the proper use of the fire extinguishers, and they did. The plant was loaded with Fire Extinguishers. As a summer help and labor crew hand, we would have to do a monthly inspection of all the plant extinguishers to check their pressures and initial the inspection sticker showing that we had been by to check it. This was a practice that would later change to once each quarter when the Power Plant Men were strung out too thin and the labor crew no longer existed. Even later, the operators inspected them as they made their rounds, since they walked by them during their shifts anyway.
The plant had more than just the regular chemical fire extinguishers, it had the larger roll-around type in a few places as well:
The Fire Training Service trained us to use this as well. Actually, they motivated us to go out and buy fire extinguishers to put in our own homes. Which came in handy for me one year when an air condition repairman was using a blow torch in my house to cut out the cooling coils but forgot to take out the filter first.
The moment I saw him light up his torch, I pulled out the extinguisher from under the sink and set it on the counter. As I watched him, he suddenly started jerking back and forth. I figured something was up, so I pulled the pin, and when he was finally able to pull the burning filter out of the air duct, I was ready to blast it with the extinguisher. So, I gratefully thank the electric company for properly training us to use the handy dandy fire extinguishers that you might use around the house.
One important thing that you learn about the little extinguishers in your house is that they don’t really go very far before they run out of chemicals. So, you have to get the job done quickly while the fire is still small and manageable.
When I first heard that we were going to be trained to fight fires the second summer I was at the plant as a summer help, I was pretty excited. Wow… Great!!! Fight Fires! That sounds fun. A day of watching safety videos and playing with fire extinguishers. I didn’t realize at the time that there was a reason why OSU Fire Training Service was the best fire training school in the radius of about 1,000 miles.
Sure. We watched the training videos. We learned all about proper fire extinguisher care and maintenance. We heard stories about how small fires turned into raging infernos that burned companies right out of business. One thing I remember is that some large percentage of companies that have a major fire are never able to recover to the point that they go completely out of business.
If you need the exact percentage, I suggest you call up the OSU School of Fire Protection and Safety. They probably have the latest statistic printed on their school lunch napkins, because these guys eat, drink and sleep fire safety.
Then, after they had impressed us with their Fire Safety Prowess, they said, “Let’s take about a 15 minute break, and we will meet outside just north of the water treatment plant where we will resume your lessons. Oh, and bring your rubber boots and maybe a rain suit.” Rain Suit? What? It’s about 100 degrees outside. “I wouldn’t mind getting a little wet”, I thought to myself. — The simpleminded summer help that I was at the time.
I would describe in detail to you how they had this obstacle course of staircases and pipes and other metal structures all sitting in a big tray. It’s enough to say that it was quite a tangled mess of a contraption.
“Interesting.” I thought… Are we going to climb the staircase and shoot the fire from up above with our handy dandy fire extinguishers which were lined up in a row off to one side? Climbing over pipes to fight a fire under the stairs maybe… Do we get to use the big roll around fire extinguisher that was there too? This looks like it might be fun.
That was when the fun began. One of the trainers turned a valve, and then I noticed that there was a fairly large tank there also that was hooked up to the pipes that wound around the mocked up structure of a stairway and other obstacles in the large tray. As he turned the valve, what looked like diesel or kerosene like petroleum product came spraying out of various holes in the piping spraying everything in the tray drenching it with fuel.
This other guy had a long rod that he had lit like a large lighter only it was giant size, and after the fuel had been spraying out for a while, he lowered the flame down into the tray that now was beginning to fill up with some kind of oily substance. He lit it and the flames quickly spread over the entire structure. He had us go in groups of 4 people with fire extinguishers to try to put out the fire. As their extinguishers ran out of fuel, others waiting behind would take their place trying to put out the fire.
We would chase the fire around the structure trying to put it out, but it wasn’t as easy as you would think. If you didn’t completely suffocate it by hitting it from many different directions and in a pattern from one end to the other just right, the fire would dodge around the spray from the extinguishers to be right back where you started. By the time we had used up all the extinguishers, we may have put the fire out about 3 times.
Rubber boots… I kept thinking…. my feet are getting hot… You couldn’t hardly get close enough to the fire to use your fire extinguisher without getting your eyebrows singed. I was always known for having long eyelashes, and I thought I could hear them sizzle as they brushed against my safety glasses.
That’s when they pulled the fire hose out of the fire box that was there next to the fire hydrant. All over the plant grounds there were these red boxes. They are lined up alongside the long conveyor belt from the coal yard to the plant (about 1/2 mile). They were also lined up around the two silver painted million gallon number 2 Diesel tanks. They were just about everywhere you looked (come to think of it).
I remember Summer Goebel when she was a new plant engineer one time asked me when she had first arrived, “What are all those red boxes out there?” (she was pointing out the window of the Engineer’s office). I told her they each contained fire hose and a valve wrench to open up the fire hydrant. I neglected to add that they also provided great shade for all the Jack and Jill rabbits that inhabited the plant grounds, which doubled as a wild life preserve.
So, we were going to use the fire hose! That sounded like more fun. That is until the one guy said to the other guy (more using hand and face signals — like putting his thumb up and winking) “open ‘er up” — so, he was using “slang” hand and face signals…
That’s when the real training began. First of all, we all backed up because as the flames grew on their structure, the heat literally talked directly to your legs and magically told them…. “back up, or else…” so, now that we were standing a good 50 feet away from the fire, we lined up in a row on the fire hose.
4 of us. Four hefty Brawny Power Plant men… (well, 3 hefty brawny power plant men, and one scrawny little runt of a summer help who actually thought he could be measured alongside them), Isn’t that a bit much for this one 4 inch fire hose? (or was it just 3 inches?). There were two hoses actually being used. One to create a wide barrier of water to protect us from the heat, and another hose to shoot water through the barrier into the fire.
A couple of guys manned the large roll around fire extinguisher. Here is an actual picture of the OSU Training Service training a group of employees at a work site to fight fires to give you a picture of what we faced:
Notice the two different types of sprays in the picture. one very wide spray and a narrow spray.
Like I said, these guys aren’t called the best Fire Trainers because they have pretty pamphlets. so, the first time I slipped in the mud, I thought… hmm… I suppose the rainsuit would have kept all that mud from coming into contact with my jeans, and my shirt and my ego.
Well, the most fascinating thing was that we could walk up real close to this intense fire and the wide spray of water sheltered us from the heat.
Then with the large fire extinguisher on wheels, you could open it up on the fire by standing behind this barrier and shoot the chemicals right through the water onto the fire, and it would quickly and incredibly put out that tremendous fire when it was done right. The other fire hose that was spraying through the barrier of water was used to cool everything down so that the fire didn’t spring right back up. the water wasn’t going to put out an oil fire.
Anyway, not long after our first of many fire fighting training sessions that we had throughout the years, the night that we were actually fighting the dragon in the boiler (See the Post, “Where do Knights of the Past go to Fight Dragons Today“), the Control Room came over the gray phone (PA system) saying that there was a fire on the turbine room floor.
A bunch of power plant he-men dropped the lance they were using to pierce the dragon and ran off to fight the fire. It turned out to be a barrel full of oily rags that had spontaneously combusted. The fire refused to go out for a long time. It kept re-igniting until the contents had completely burned up.
I remained in the bottom ash area as I was still reeling from the steaming hot water that had been spewed all over me. A little while later the men were back ready to grab the lance and go back to work on the boiler around 10pm (this after a full day of coal cleanup from 8am that morning).
The one important topic that they ingrained into our minds while we were taking the training was that you have to know when the fire is too big to fight. We had learned what our equipment could do and what it couldn’t do. So, we had the knowledge to realize that if the fire is too big, then it is time to get out of there and call the professionals. The only problem was that the nearest professionals were about 20 minutes away. A lot can burn down in that amount of time…. but that is a story for another time. I see the grin on the power plant men’s faces. They know what I am talking about.
Comments from Previous Repost:
Originally Posted on November 17, 2012:
Louise Gates seemed reluctant to approach me to ask if I wanted to make a donation for flowers for Grant Harned’s funeral. Of course I did. He was a good friend of mine. We had many carpooling adventures before he left his job as the plant receptionist to move to Tulsa, Oklahoma where he died a little more than a year later in May 1984 in an automobile accident.
Thomas “Grant” Harned had obtained a degree in business from Oklahoma State University before accepting the job at the coal-fired power plant in North Central Oklahoma. He told me that he thought that once he had his foot in the door that he would be able to advance up the HR chain until he worked his way into a business department downtown at Corporate Headquarters. Downtown is synonymous for Oklahoma City.
Like many struggling new Power Plant men such as Ed Shiever, Dale Hull and others, Thomas lived in a modest student rental apartment near campus. Grant lived on West Miller Avenue just off of Main Street in Stillwater. Soon after I had become a janitor and the summer helps I had been carpooling with had left, I began carpooling with Grant.
Grant was a tall thin man with sandy hair and a moustache that reminded me a lot of Gary McCain (also known as Stick). I have a picture of him around here somewhere that I found many years after his death when we were cleaning out the office that Louise Gates (now Kalicki) had obtained upon becoming the supervisor over HR. It is a picture of him sitting at the receptionist desk.
Louise gave me a picture of myself that had been taken when I was a janitor, and as I filed through the other pictures I found Grant’s photo. I knew no one else at the plant would want the picture as few knew him or even remembered him by that time. So I took it as well. Some day when I find where I have placed those pictures, I will post them. (I found the picture since the original post).
As I mentioned, Grant was just out of the Business College at OSU and he was fired up, ready to make a difference. He had all sorts of ideas that he shared with me about how the plant and the company business processes could be improved.
He reminds me now of myself years later when I was carpooling with Scott Hubbard and Toby O’Brien and how I would talk about having smart electricity instead of the same dumb electricity we have had for the past 100 years. Except that Grant’s ideas were about business processes, where my ideas were about electrons moving through a conductor.
For Power Plant Men, carpooling is a way of getting into other Power Plant Men’s minds and understanding them from the inside out. Each day while driving back and forth from the plant you are basically locked into a confined space with one or more other individuals with nothing but your thoughts, or NPR or in the case of Dale Hull and Ricky Daniels… Beer.
In the case of Grant Harned, he soon became frustrated. He had graduated from school and wanted to make a difference somehow. And he wanted it to happen right away. He would tell his manager Jack Ballard his ideas about how he thought things could change, and each time Jack would shoot it down.
I’m not saying that Grant had great business changing ideas that would change the way Power Plants all over the country operated. He just wanted to be listened to, and he didn’t understand that there were built-in reasons why we did it the way we did. The most important was that “We had been doing it this way for 35 years, and we’re not going to change it now.”
For some reason that rubbed Grant the wrong way. Maybe because he couldn’t help thinking outside the box. He obviously had trouble understanding the benefit of doing something the same way for 35 years. I guess he must have missed the class where “because I said so” was a solid business case. If he had stuck around long enough Ben Brandt would have explained that to him.
Anyway. It is true that Power Plant business processes before Grant’s time and for a while after, were based on doing things the same way it has always been done. I suppose that is why electricity for all those years was the same boring thing…. 60 cycles (60 Hz or 50 Hz in Europe) Alternating Current. Regular Sine wave, perfectly generated. Each wave identical to each other. — But I’ll talk about electricity later. At this time I was still a janitor.
Grant finally decided that he was going to look for another job because he realized that he didn’t have a future at the power plant. He had been trained as a business person and there was little opportunity to display and cultivate his new found skills at a power plant in the middle of the countryside where everyone was content with the way things were.
Before he left, he gave me some cassette tapes that he used to play on the way to and from work. I kept them for years until I had worn them out listening to them in my car. Two of the tapes were The Rolling Stones, one of his favorite bands.
I said goodbye to Grant when he left, but I never forgot him. Each year on All Souls Day (November 2), I remember him and David Hankins. He, like most of the men I have carpooled with over the years was like a brother to me. Those that weren’t brothers, were fathers.
It didn’t occur to me until after I first wrote the original post that years later, I too went to Oklahoma State University while I was working at the plant to obtain a degree from the Business College, Spears School of Business. As with Grant, the Electric Company had no use for someone with my newfound skills, so I moved south to Round Rock, Texas to work for Dell. I wonder if Grant was looking down giving me a thumbs up as I walked to the podium to get my diploma.
I mentioned that I don’t know where I placed his Power Plant picture, but I do have other pictures (before I recently found it):
Evidently someone else remembers Grant as I do. I found these picture of him on a memorial site online. There is a comment there that says this of Grant: “Was known in school and by friends as Grant. He had a great sense of humor and would always make you laugh.”
I agreed with Grant. He really didn’t belong at the power plant. Power Plant life and culture at the time was not geared toward “continuous improvement” and Six Sigma. It was about coming home safely at night to your family and doing a good days worth of work and having something to show for it. He was young and ambitious.
I cherish the time I spent with Grant driving to and from work. I remember many of the conversations that we had. Many of them philosophical in nature. Some having to do with the regular questions people have about life and God. I know that he was being drawn toward something greater, and in the end I pray that he found it.
Originally posted December 29, 2012:
Each year at a Power Plant there are two times when the Power Plant Men are invited to a banquet. There is the Service Award Banquet and the Christmas Party. The Christmas Party was a chance to meet the spouses and children of the other Power Plant Men and Women. Unlike the Service Award Banquet where you could only bring one other person, the Christmas Party allowed you to bring your entire family. Interestingly, this became a point of conflict for those few at the top when I was a new full time power plant worker.
The first year I was able to attend the Power Plant Christmas Party was after I had become a Janitor in 1982. I had graduated from college with a degree in Psychology (which made me a much better janitor) and at the end of my fourth summer as a summer help, I was able to hire on full time to begin the rest of the 19 remaining years with the company. I received my free turkey for Thanksgiving and another one for Christmas.
The farmers that worked at the plant had baled the hay on their own time from the fields surrounding the lake and we used that money to buy the turkeys. That was, until Corporate Headquarters (or maybe it was just the evil plant manager), found out about it and decided that this money belonged to the entire company, and so, in future years, instead of making a profit, the company had to hire people to cut the grass, paying tens of thousands of dollars each year with only an expense instead of a profit to show for it… and no Turkeys. See the post: Belt Buckle Mania and Turkeys During Power Plant Man Downtime for a more complete description of this example of Corporate Efficiency gone awry.
Since I was making a total of $5.15 per hour, I was still living at home with my parents. So, when they asked me how many guests I would be bringing to the Christmas Party, I told them 2 guests and myself. On the night of the Power Plant Christmas Party I showed up at the Oklahoma State University Student Union Banquet room in Stillwater Oklahoma with my Mother and Father. As we walked into the banquet room, I noticed a strange expression on both Jack Ballard’s and Linda Dallas’s faces (The two heads of HR at the plant). It was one of surprise and yet at the same time, slightly indignant.
I wasn’t sure what to make of it. It was as if they were smiling while greeting the guests as they came in, but when looking at my parents, they both seemed as if they had just swallowed something distasteful and were trying to pretend that they hadn’t. I thought for the moment that they were just in awe of my parents. After all, my dad was an important Veterinary Professor at the University, and my mom, well… She had the slight resemblence of Queen Victoria, and probably a lot of her disposition. Though she was on her good behavior that night.
Actually, Queen Victoria’s face almost looks like Marlin McDaniels in drag. I’m sure those Power Plant men that remember Marlin can see the resemblance. If you just look at only the face. I’ll bet Marlin is related to the Queen.
The Christmas party generally had one of the Power Plant Men dressed up as Santa Claus. This was usually Glen Morgan from the Instrument and Controls department (known as the “Results” department at the time). He best fit the suit.
He would hand out gifts to the children. I remember that every now and then when they were trying to plan the Christmas event, the topic of gifts for the children would come up. Some believed that it wasn’t really fair to give gifts to the children since not everyone had children, and some were not married at all. Usually the gifts for the children won over the dissenters. Someone would point out that Christmas was really all about the children in the first place, and when they would take a vote, the children would receive their gifts.
I found out what Jack’s and Linda’s expressions were for the following year. I was in the electric shop when they asked how many people I would be bringing to the Christmas party and I told them that I was going to bring 3 guests and myself. My girlfriend had moved from Seattle, Washington to Norman, Oklahoma to work toward a degree in Nursing at Oklahoma University. I was going to bring her along with my parents to the Christmas party that year.
A couple of days later I was asked to go up to the front office. Jack Ballard wanted to talk to me about something. When I arrived in his office, he explained to me that I was not able to bring my parents to the Christmas Party. I asked why that was and he explained that I could only bring a date or my immediate family. I told him I was still living at home and that my parents are my immediate family. He went on to explain that if they let me take my parents, then other people might want to bring their parents as well. This would open up a whole can of worms.
Yeah, well, a can of worms… no, we wouldn’t want to do that. Finally Jack said that I could bring my parents, or I could bring a date, but I couldn’t bring both. Ok. I was somewhat upset since I had already told my parents the date of the party and my dad was really looking forward to meeting with the Power Plant Men as he did the year earlier. He had a lot of fun talking with real people instead of the pretentious professors he usually met with. There wasn’t any way I was not going to bring my girlfriend. I wanted everyone to meet her. More importantly. I wanted Kelly to meet everyone I was always talking about.
There was another reason why I thought that the “front office” didn’t want my parents to go to the Christmas Party. It had to do with the relationship the Assistant Plant Manager had with my father. Bill Moler liked to keep his role at work and his role away from the plant completely separate (for good reason). I felt that this was the same reason he was disturbed when he came back from summer vacation to find me already hired as a janitor. This was only a thought and a feeling. I never had any real reason to believe this was what was behind Jack’s concern over my parents going to the Christmas party. Either way it was a Party Pooper.
So in 1983, my parents stayed home, and I went to the Christmas Party with my girlfriend Kelly. I think she was so impressed with the Power Plant People that two years later, almost to the day, we were married.
We sat with Arthur Hammond and his wife and children. Arthur was a new electrician. He had become a plant electrician on the same day that I did. I will talk more about him in future posts. We had a fun time. You couldn’t really help but have a fun conversation with Arthur Hammond. Especially if you are part Italian like myself. Arthur liked to argue. That is one reason we got along so well.
Fast forward 10 years. The Christmas Party in 1993 was held in Ponca City. My daughter Elizabeth was 3 years old. Bud Schoonover, at the age of 58, was chosen to be Santa Claus that year. Now…. Not only is Bud Schoonover the best size to fit the Santa Claus suit, but he also was so shy when the children came up to sit on his lap for him to hand the presents to them that it gave him a hidden sort of dignity that the children perceived as being very “Santa” like. My daughter was convinced that this Santa Claus was not like the Mall Santas. This was the real Santa Claus. For years Elizabeth was convinced that Bud Schoonover was the real Santa.
Because Bud was so shy, his cheeks had turned cherry red. He couldn’t do anything but smile and look with wonder at the children as they came up to him and he handed them their gifts. My daughter had picked up on the genuine look of wonder that Bud expressed as she sat on his lap looking into his eyes.
Bud Schoonover really had transformed himself into the Genuine Santa Claus for that one half hour. I could confidently tell Elizabeth when she asked me on the way home if that was the real Santa Claus that I thought that he really was. Bud confided in me when he told me that he was literally scared to death the entire time.
Six months later, Bud Schoonover retired from the Power Plant during the “early retirement” stage of a downsizing. He was truly missed by everyone that knew him. I have written about Bud before, and I will write about him again. You can learn more about his personality by reading: Carpooling With Bud Schoonover
Originally posted March 1, 2013:
I thought my days of working with summer help was over when I joined the Electric Shop at the Coal-fired Power Plant in North Central Oklahoma. I had worked as a summer help for four summers while I was going to college to obtain a degree in Psychology. As I stated before, this helped me become a first rate janitor, as I was able to lean on my broom and listen to the problems of Power Plant Men that needed an ear to bend and to have the reassurance that they really didn’t have a problem. It was someone else’s problem.
When the second summer of my electrical career began, the electric shop was blessed to have Blake Tucker as a summer help. I had worked with Blake before when we were in the garage, and I had found him to be a man of character. I was glad to be working with him again. Not only was Blake a respectable person, he was also very smart.
Blake was going to the university to become an Engineer. Because of this, he was able to be in a higher class of summer help than I was ever able to achieve. As I mentioned in earlier posts, my first summer I was making all of $3.89 an hour. By the time I left to become a janitor, I had worked my way up to $5.14 an hour. After arriving in the Electric shop, my wages had quickly shot up to a little over $7.50. Blake was able to hire on as an engineer summer help which gave him the same wage that I was making.
Bill Bennett, our A Foreman, said that he had a difficult task that he thought the two of us could handle. We needed to go through the entire plant and inspect every single extension cord, and electric cord attached to every piece of equipment less than 480 volts. This included all drill presses, power drills, drop lights, coffee machines, water fountains, heat guns, electrical impact guns, refrigerators, hand held saws, sanders, grinders, and um…… er… it seems like I’m forgetting something. It’ll come to me.
Anyway. Each time we inspected something, we would put a copper ring around the cord with an aluminum tag where we had punched a number that identified the cord. Then we recorded our findings in a binder. We checked the grounding wire to make sure it was properly attached to the equipment. We meggared the cord to make sure that there were no shorts or grounded circuits. We made sure there were no open circuits and repaired any problems we found. Then once we had given it our blessing, we returned it to our customers.
We went to every office, and shop in the plant. From the main warehouse to the coal yard heavy equipment garage. Wheeling our improvised inspection cart from place to place, soldering copper rings on each cord we inspected.
One thing I have learned about working next to someone continuously for a long time is that you may not realize the character of someone up front because first impressions get in the way, but after a while, you come to an understanding. The true character of respectable people isn’t always visible right away (this was not true with Blake. I could tell very quickly when I first worked with him as a summer help that he was a good person. Work ethic tells you a lot about a person). Other people on the other hand, that are not so respectable, are usually found out fairly quickly.
Men of honor aren’t the ones that stand up and say, “Look at me! I’m a respectable person.” People that are dishonorable, usually let everyone know right away that they are not to be trusted. This isn’t always the case, but by studying their behavior their true character is usually revealed. I think it usually has to do with how ethical someone is. If they mean to do the right thing, then I am more inclined to put them in the honorable category. — Anyway…
Since Blake was studying Engineering, I took the opportunity during lunch to run some of my mathematical queries by him. Since I had been in High School, I had developed different “Breazile’s Theories”. They were my own mathematical puzzles around different numerical oddities I had run across. Like dealing with Prime number, Imaginary numbers and the Golden Ratio (among other things).
So, for part of the summer, we spent time on the white board in the office looking at different equations. There was no one else at the plant at the time that I could talk to about these things. — I mean… others just wouldn’t appreciate the significance of adding 1 to the golden ratio!
Anyway. I titled this post “…Summer Help Stories”, and all I have done so far is talk about how good it was to work with Blake Tucker. Well. A couple of years after Blake was our summer help, we were… well… I wouldn’t use the word “Blessed” this time. We were given a couple of other summer helps for the summer. One of them was a good worker that we enjoyed having around. His name was Chris Nixon. I won’t mention this other guy’s name in order to not embarrass him, but his initials were Jess Nelson.
Right away, you knew that you didn’t want to work with Jess. I worked with him once and I told my foreman Andy Tubbs that I didn’t want to work with him again because I felt that he was not safe. I was afraid he was going to get both of us killed. One reason may have been that I would have been fried in an electric chair for killing him after he did something really stupid.
Luckily Andy was accommodating. He allowed me to steer clear of Jess for the rest of the summer. We just had to watch out for him while he was in the shop. He was messing around most of the time, and had absolutely no work ethic. We couldn’t figure out how come he was allowed to stay after a while. Most people in the shop didn’t want to be around him.
I think Bill Bennett finally found a couple of electricians that would take him. He worked with O.D. McGaha and Bill Ennis on freeze protection. Since it was the middle of the summer, I think that was probably the safest place for him. it turned out that Bill Bennett had some pressure put on him to keep him in the electric shop instead of firing him outright because he was in the same fraternity in college that Ben Brandt, the Assistant Plant Manager at the time was in, and he was a “friend of the family.”
Anyway. The majority of the plant knew about Jess before the end of the summer (as I said before. Those people that are less honorable usually like to broadcast this to others). That’s why, when Jess “stepped into a pile” of his own making, all the Power Plant Men just about threw a big party. It seemed to them that Jess’s “Karma” had caught up with him.
Chris Nixon, the more honorable summer help, was from Stillwater, Oklahoma, and had actually gone to High School with my brother. Jess on the other hand lived in a different town in Oklahoma usually, but was living in Stillwater while he was working at the plant. I figure he was probably living in his fraternity house on campus though I don’t know that for certain.
Well. One morning the week before the last week of the summer before the summer help headed back to school, Jess came into the shop strutting around like a proud rooster. He was so proud of himself because he had been at a bar on the strip by the Oklahoma State University Campus and had picked up a “hot chick”. He had a tremendously good time, and he wanted everyone to know all about it….. (as less honorable people often do).
After everyone had to hear him crowing about it all morning, Chris Nixon sat down at the lunch bench and asked him about his date from the night before. Jess went into detail describing the person that he had picked up (or had been picked up by). After listening to Jess for a while, Chris came to a dilemma. He knew the person that Jess was talking about. After asking a few follow-up questions, Chris was sure that he knew the person that Jess had his intimate encounter with the night before. He finally decided he had to say something.
Some of you may have already guessed it, and if you are one of the power plant men from the electric shop at the time (that I know read this blog), you are already chuckling if you are not already on the floor. If you are one of those honorable electricians, and you are still in your chair, it’s probably because you are stunned with amazement that I would have ever relayed this story in an actual public post and are still wondering if I am really going to go on.
I said above that Chris Nixon knew this person. I didn’t say that Chris knew this girl, or even “woman”. Yes. That’s right. While Jess thought he was out with a hot blonde all night doing all sorts of sordid things that he had spent the morning bragging about, he was actually not with a woman at all. Oh my gosh! You have never heard the roar of silent laughter as loud as the one that was going through everyone’s mind when they heard about that one!
For those men that had been thinking that they wished they were young again while listening to Jess in the morning, they suddenly remembered why they had made the decision to keep on the straight and narrow when they were young.
It would have been more funny if it hadn’t been so pitiful. After being sick to his stomach, he became angry. He called up the local Braum’s to find out if a “person” meeting this description worked there as Chris had indicated. He wanted to go down there and kill him. Of course, he decided not to, but he did go home sick that day and didn’t show up the rest of the week.
He did show up the next week, and the female summer help that had been working in the warehouse had written a poem about their summer help experience which they shared to the entire maintenance group at a farewell lunch in which they made mention of Jess’s unfortunate encounter.
Some folks in the electric shop gave Jess their own “going away present” down in the cable spreading room. I wasn’t there, so I can’t speak to it with any accuracy, so I’ll just leave it at that. Luckily it was still kept clean after I had had the Spider Wars a few years earlier. See the post Spider Wars and Bugs In the Basement for more about that.
Well. We thought we had seen the last of this person. We were shocked when next summer rolled around and Jess returned to our shop as the summer help again. He had been a total waste of a helper the year before. The entire electric shop went into an uproar. Everyone refused to work with him because he was too unsafe. We had barely escaped several injuries the year before.
Bill, being the nice guy that he was, had given Jess a good exit review the year before, because he didn’t want him to have a mark on his record. Well, that had come back to bite him.
Both Charles Foster and Andy Tubbs, our two electrical B foremen at the time went to Bill Bennett and told him that he never should have agreed to have Jess come back when he knew that he was not a safe worker. Bill had received some pressure from above to re-hire this person, and Jess had made it clear the year before that he could do what he wanted because Ben was friends with his family. But with the total uprising, Bill had no choice but to go to Ben Brandt and tell him that he was going to have to let Jess go.
Talk about “awkward”. I’m sure this was a tough task for Bill. He always did his best to keep the peace and he took the “fall” for this. Ben was angry at him for hiring him in the first place (after applying a certain amount of pressure himself) only to have to let him go. Anyway, that was a much safer summer than the year before. That was the last attempt at hiring a summer help for the electric shop.
Comments from the original post:
Thanks, Kevin – good post.
I don’t remember Jess. But I enjoyed working with Ben. He was of fine character and always wanted to do the right thing. Personnel (Corporate Headquarters) made it extremely difficult to terminate anyone. I think they feared “unlawful discharge” lawsuits more than anything. We always preferred getting candid and objective evaluations from our Foremen before hiring rather than after (if possible).
I was “suspect” early in your story of where you were going. I remember the whole thing and for years looked at every guy working at Braums and wondered. . . . .? ” I hope this guy scooping my ice cream isn’t him.
Plant Electrician March 4, 2013
Yes. I believe the guy’s name was Terry.
Hi Kevin, I remember when that all happened. I ran into Chris Nixon last summer, he is working for the Payne County Sheriffs department.
Originally Posted March 16, 2013:
Seventeen years before Harry Potter captured the Snitch in the movie “Harry Potter and The Sorcerer’s Stone”, the Coal-fired Power Plant in north central Oklahoma was plagued by a similar elusive snitch. Unlike the snitch in Harry Potter, which was a small ball with wings that held a special secret only revealed in the last moments of the last Harry Potter Book (and movie) “The Deathly Hallows”, the Power Plant snitch had a more sinister character.
The Power Plant Snitch reminded me once again of the phrase that “Absolute Power Corrupts Absolutely.” I had experienced this phenomenon only a few years earlier when I was in High School and my father was a victim of this type of corruption. This made me especially abhorrent of deceit and dishonesty in the workplace. This was the reason why I had become so upset while I was a janitor and I learned a little “lie” that Jack Ballard had cooked up to force the employees to use their floating Holiday first so that they couldn’t use it around Christmas (See the post Power Plant Secrets Found during the Daily Mail Run).
You see, in the Lone Power Plant stationed out in the middle of the country in North Central Oklahoma, a plot had been hatched by the Evil Plant Manager that rivaled a James Bond conspiracy to take over the world. Only in this case, it was a conspiracy to take over the personal dignity of honest, descent Power Plant Men. Men who said their prayers each night when they went to bed. Men who went to work each day to provide for their children. Men who held God and country in the highest esteem.
As I mentioned above, I had seen this abuse of power before when I was in High School. It had affected my personality in a way that I became instantly angry at the site of dishonesty. This was something I had to learn to deal with throughout the years as I interacted with men of less than honorable dignity. In order to understand why, I will divert into a side story:
My parents had kept their financial difficulties and other stress out of our lives while I was in Junior High and High school back in the mid ’70’s. They didn’t tell me that my father, who was listed in the top 20 Veterinarians in the world, and among the top 5 bird specialists, was being targeted by the Dean and his minions at the University of Missouri Veterinary College.
I remember that my mother was introducing new foods to our palate, such as Lentils and other types of rice and bean dishes. She had even gone to work as a secretary at Stephen’s College to make ends meet. At the same time, I had traveled with my dad when I was 13 to Europe where I met Veterinarians around the world that all greeted my father as if he were some kind of king.
I remember walking down the road on the way to Liverpool from the University (a 5 mile walk) where a group of bird specialists from around the world were meeting to determine the universal Latin names of every part of the bird’s anatomy (which at that point had not been defined). The Veterinarian walking with me from India told me after I had made some offhand comment about my father. He said, “You don’t realize who your dad is. In India, your dad is the Father of Physiology! Your dad wrote the bible of Veterinary Physiology used around the world!”
I knew the book he was referring to. My dad had worked for three years day and night writing this book. Collaborating with renown Veterinarians around the world to compile a comprehensive book of Veterinary Physiology. The first of it’s kind. Before this book was written, you could only find the Physiology of a Pig, or the Physiology of a Dog. My dad had created a masterpiece that included an all-encompassing Veterinary Physiology in one book.
I say this, not to lift my father on a higher pedestal than he already is, but to put in perspective, how an important person such as James E. Breazile, DVM was treated by the “Evil Dean” of the Veterinary College at the University of Missouri in 1974 and until the day he resigned on January 16, 1978. Actually, the day my father brought the gold bound copy of the book home and presented it to my mother, she stopped talking to him for about a month for the first time in her life (for a totally unrelated reason which I may relay in a future post). Though the publishing company made a lot of money for years after this book was published, the total amount my dad received for his years of work totaled no more than $10,000 over a three year period.
Anyway. To make a long story short, (because I could go on for days about this), my father was not able to get a job at any another University in the United States, because he had tried to bring the corruption of the leaders of the Veterinary School (who had been stealing money from the University through bogus expense reports) to light, only to be told by the Chancellor of the University at the time, Herbert Schooling, “Boys will be boys.” It was just like the moment when Saruman told Gandalf, “We must join with him!”
It was only because my father had worked for Oklahoma State University before, when I was very young, that they didn’t need “permission” from University of Missouri to hire him, and take the multi-million dollar contracts that he had with Purina (and other businesses that had funded their electron microscope and other expensive scientific equipment at the time) with him, that we were able to escape the firewall that had been placed around my father’s career (ok. that sentence is long enough for an entire paragraph).
Anyway (again)…. I can’t let this story go until I give you the moment that was the “clincher” for me. The moment that I finally believed that my mother and my father hadn’t just gone off their rocker and become extremely paranoid living in a “James Bond” world….
My father (secretly) obtained a job from the Oklahoma State University in the Veterinary College. He was to start on January 9, 1978 with tenure (meaning that he couldn’t be fired without a really good reason). One week before he was going to resign from the University of Missouri. As usual, Oklahoma State University would begin classes one week before the University of Missouri after Christmas break.
During Christmas break (when I was a senior in High School), we would sneak into my father’s office at the Vet School in Columbia Missouri to remove his books and personal items from his office. We would go to this office at 10 o’clock at night after the school was closed for the night. At this point, I believed that both my mom and my dad had gone off their rocker and I was already planning on going through the phone book to find them a good Psychologist, or a priest to help them out.
Until Sunday morning, January 1, 1978. New Years Day. My mother and I were on our way to an early morning Church service at Our Lady Of Lourdes. My mom said that she thought it would be safe to drop by the Veterinary school and pick up some of dad’s things from his office (Dad had already left for Stillwater, Oklahoma to deliver a load of books and personal belongings – did I mention that my dad had a lot of books?).
As we pulled into the parking lot at the Veterinary College, my mom told me that I couldn’t go in because that was “Brown’s” car on the parking lot. — She had names for the different “bad guys” in the department. The Dean was “Whitey”. There was an older lady professor named “Brown”. Then there was the one that I recognized the most…. “McClure”.
I told my mom… “Look. It’s 9 am on Sunday morning. New Year’s Day. She was insistent that “Brown” was in the building. Then finally she told me. “Ok. go downstairs (where my father’s office was) and look around. If no one is there, then grab some of his books.”
Then one of the most bizarre moments of my life occurred. I still remember every detail. It was like I had gone into a dream where fantasy suddenly became reality. I entered the dark building using my father’s key. Immediately turned left and went down the stairs into the darkness. I had to feel my way down the stairs, holding onto the handrail.
As I stepped into the subterranean hallway, I turned north toward my father’s office. I immediately stopped. About 50 yards ahead of me I could see two offices next to each other with their doors open and their lights on. The rest of the hallway was totally dark as we were below ground. Having been a “spelunker” in my youth, the darkness didn’t bother me, however, the existence of lights ahead were a total surprise.
I briskly walked down the hallway past the two doors. In the first office a lady was sitting at a desk. In the second, a man. I quietly walked on by. Then I turned around and walked passed the door where the man was sitting and stopped between the two doors. I could tell that both the man and the woman were talking on the phone. After listening for a moment I could tell that they were talking to each other, though I couldn’t hear what they were saying.
As a seventeen year old High School student, I suddenly realized that everything my mother and father had been saying for the past 5 years had been true. All the bugs found in my dad’s phone. All the threatening notes. The trips down to the gas station to use the pay phone because they were sure our own phones were bugged. The reason why he hadn’t received a raise in 5 years… All made sense! These guys were crazy!
I walked south to the stairway and turned around and looked back. “Brown” (the lady), was standing in the hallway with her hands on her hips like Professor Umbridge in Harry Potter!
I stood there for a second looking at her silhouetted against the light from her office, knowing that she couldn’t tell who I was in the darkness. then I darted up the stairs. Ran outside to the car. Jumped in the driver’s seat of the Pontiac Station Wagon and told my mom what I had seen.
My mom explained to me that this was “Brownie”. They talk on the phone so that no one can say that they have been seen talking together. You see…. they are supposed to be at a conference or some other “official” business this weekend so they can claim expenses for flights, hotel and food. That is why “Whitey” can live in a big ranch south of town on his measly salary. This is what my father had told the Chancellor of the University who told him that “boys will be boys”.
I didn’t know whether to lean over and kiss my mom when I suddenly realized that the list of insane people didn’t include my mother and father, or to peel out of the parking lot before Professor Umbridge made it up the stairs! Anyway. On News Years Day 1978 I had a totally new perspective on life. I can tell you that for certain.
To finish up with this side (non Power Plant) story…. in 1980 when Barbara Uehling became the Chancellor at the University of Missouri (from Oklahoma University, where I had attended school two years before), she began to clean house. I remember the day I learned that she had fired “Whitey” the dean of the Veterinary school.
I woke from my sleep very early in the morning when the phone rang. It was my father from Stillwater, Oklahoma. He had received a call from Iowa State from a Veterinarian, Deiter Delman, who had told him that they had just fired Whitey the Dean of the Veterinary College at Missouri. I told dad that was great, and I crawled back to my bed to finish my nightly ritual of sleep.
Moments later I was woken by another phone call. One of my professors from the College of Psychology Dr. Wright had called me. He said, “I have some news that your father will probably like to know. It is really top secret! I said, “Does it have to do with “Whitey” being fired? In my head I could see Dr. Wright’s one fake eye spinning around in his head like Professor Moody in Harry Potter (even though he hadn’t been thought of yet in 1981).
Professor Moody… I mean Dr. Wright…. said, “What? How do you know? This is “Top Secret?” the meeting was over just minutes ago? I told him that Dr. Middleton had called Dr. Delman, who had immediately called my father, who had already called me moments ago. — To put this in perspective…… The whole world knew within minutes. I wrote a letter to the Chancellor Barbara Uehling explaining the events that I knew about. She wrote back saying that the Provost would be looking into the additional names I had given her.
End of side story…..
Back to the Power Plant Snitch… (I can tell… this has already become a long post and is probably going to break my record of the longest post of all time).
In September 1984, not one year after I had joined the electric shop, Bill Bennett, our A Foreman, came down to the electric shop (which was normal. Since he ate lunch with us every day). This time, he locked the doors. The door to the Turbine room, the door to the main switchgear and the front door…. — all locked. He said, “What is said here doesn’t go outside this shop.”
Ok…. We all went instantly into “serious” mode. Bill explained that there was something up with the grubby looking janitor (I’m sorry… I don’t remember what name he was assuming to use at the time — I’ll call him “Bonzo” from now on). The janitor “Bonzo” had been neglecting his duties as a janitor, so Pat Braden (the lead janitor) had gone to Marlin McDaniel to have him fired. Marlin McDaniel had gone to the Assistant Plant Manager, Bill Moler to start the process of firing “Bonzo”.
Marlin McDaniel (who had been my A foreman while I was a Janitor and on Labor crew after Chuck Ross had left) was told by Bill Moler that he was not going to fire “Bonzo” under any circumstance. It didn’t matter to him that he wasn’t doing his job. Marlin was told to forget about it and not bring it up again.
Bill Bennett told every person in the electric shop…. “Keep clear of this guy. I don’t know what is going on, but something is definitely wrong.” At that point everyone in the Electric shop knew that “Bonzo” was a snitch. Don’t talk to the Snitch…. Ok… from now on I’ll refer to “Bonzo” as the “Snitch”.
I know I have bored all of you by the personal story of my father and the trials that he went through, so I’ll try to keep this short: I knew a year and three months ago when I first started writing about the “Goodness” of the Power Plant Man that I would eventually come to this story. I know that the Power Plant men that read this blog knew that this story had to eventually be written. So, here it is.
Through unforeseen circumstances… and I attribute it to my Guardian Angel who has kept me out of serious trouble up to this point, I was called to Oklahoma City by my girlfriend Kelly Burgess (who ten months and 11 days later became my wife and is ’til death do us part) on February 10, 1985. I called in to Howard Chumbley on February 11 and told him I would not be able to make it to work that day. I would be taking my floating holiday.
The following Monday morning when I had climbed into Bill River’s Station wagon at the bowling alley where we met, with Rich Litzer and Yvonne Taylor and we were on our way to work, I learned about what had happened the Friday before. The day that would forever be referred to at the plant as “Black Friday.”
Bill Rivers explained the entire scenario to me during the 25 minute drive to the plant. I can’t say that I was in tears because my system had gone into shock and I was zombified by each new revelation. If I could have cried, I would have. My system had just gone into shock. All emotion had shut down.
Bill explained to me that on Friday morning (February 11, 1985), a plant-wide meeting had been held. Everyone at the plant had been informed that a drug and theft ring at the plant had been found and eliminated. This included one lady who was a janitor. A machinist named Dink Myers. The Lead Janitor Pat Braden and two of the Electricians Craig Jones and Jim Stevenson.
Drug and Theft ring? Really? At our Power Plant?
Except for the female janitor (I can’t even remember her name), I had a personal relationship with every other person on this list (whether they knew it or not). I never worked directly with Craig Jones, but as an electrician, I did know that everyone held him in the highest esteem. I later found out that Dink Myers was a distant relation of mine when two years later I attended my grandfather’s funeral. Jim Stevenson was a close friend to the point that I used to give him Swedish Massages that would ease the pain of his rampant Eczema. Pat Braden…. Well. Pat Braden.. my Janitor lead. I loved him most of all.
I invited Pat Braden to sit next to my wife and I at my wedding 10 months later, even though the Evil Assistant Plant Manager would be serving as a deacon in the wedding ceremony (he didn’t come.. I understood why). Next to Charles Foster, Pat Braden was my next dearly beloved friend. — Other Power Plant Men, such as Mickey Postman and Ed Shiever, share in my total love for Pat Braden to this day. — Not that I have asked them… I just know… They used to work for this saint.
Here is what had happened…..
Eldon Waugh (the evil plant manager) had heard from a study that came out early in 1984 that 10% of a typical workforce were either on drugs or were robbing their employer. I know. I had read the same study. The company had hired the snitch to become a janitor at the best power plant in the country to infiltrate their troops and bring out the worst in them.
I distinctly remember the snitch walking into the electric shop once as I was walking out…. He paused… looked at me as if to say something, then went on…. (– my interpretation…. “oh… a victim….”…. Guardian angel response…. “This isn’t the droids you are looking for…”) He went on without saying a word.
So the Snitch nailed a good friend of mine, Jim Stevenson…. I remember in January just before the verdict came down….. Leroy Godfrey had gone on a frenzied hunt for the portable electric generator. It had turned up missing…. Everyone in the shop was sent to look for it… After a day of searching, when it was time to go home…. I remember that as we were walking out the door to the parking lot that Jim Stevenson said, “They are never going to find the generator.” Bill Ennis asked, “Why Not?” Jim answered,. “Because their snitch has it. If they are going to let a crook like that work here, they are going to have to live with the consequences. He took the generator.”
A few months after “Black Friday”, Jim Stevenson was suing the company, and the specifically the Plant Manager and the Assistant Plant Manager. Lawyers came from Oklahoma City and interviewed people that had worked with Jim Stevenson and Craig Jones. I was in a quandary. I knew if they asked me about this situation I would have to tell them what Jim Stevenson had said. Jim had been fired for helping the snitch load the generator in the back of his truck months earlier. The funny thing was… I was the only one in the shop that they didn’t interview. I had never been on Jim’s crew, so I wasn’t on their list. At that point, if they didn’t ask me, I wasn’t going to volunteer.
The thing about this whole event was that it was setup from the beginning…. The Snitch asked Jim if he would help him lift the generator into the back of his truck…. This by itself was nothing out of the ordinary, since people could “check out” the generator for their personal use.
Jim had known that the Snitch had taken the portable generator and said to Bill Ennis that if they wanted to keep scum around like that, then they should incur the cost of that decision. What Jim didn’t know was that he was being secretly taped while he was being entrapped into loading the generator into the back of the Snitch’s truck. Jim reminded me of Dabney Coleman:
I won’t go much into the stories of Dink Myers, who shared a joint with the Snitch in the locker room, and Craig Jones who pulled up some “hemp” on the road to the river pumps to swap for a “stolen knife set” (though he didn’t know they were stolen) since these were “no-brainer” stupid moments in the life of young Power Plant Men… but I will defend Pat Braden…. The most honest and loving of souls (and again… I apologize for the length of this post).
In previous posts I have mentioned that Pat Braden reminded me of Red Skelton.
Today, when I want to reminisce about Pat Braden. All I have to do is watch an old episode of Red Skelton. As kind as Red Skelton was in real life… there was Pat Braden. If you don’t know about Red Skelton… Google him…. He was a sincere soul… He was a soul-mate to Pat Braden.
This is how Pat Braden was fired…… The snitch came to him one day and asked for the key to the closet so that he could get the VCR….. Weeks later, the VCR turned up missing and Pat was asked if he knew where the VCR went. He didn’t know. When I was a janitor I used to do go to Pat on a weekly basis and ask for the key to closet for the VCR. I had to regularly move it to the control room or the Engineer’s shack for training sessions. It was just part of our regular job and Pat Braden would have not thought twice about it.
As it turned out, the snitch had taken the VCR from the closet and had brought it straight to Bill Moler, the Assistant Plant Manager and handed it to him and told him that he had stolen it (even though technically, it hadn’t been stolen). Then about a month later, Bill sent out the request to find the VCR. At that point, Pat, who was the same age as my father (It’s funny, but a lot of people at the plant were the same age as my father), and on blood pressure medication that made his head swim when he stood up, didn’t remember anyone taking the VCR four weeks earlier… So, he was included in the “Theft and Drug ring at Sooner Plant on February 11, 1985”.
The story about Jim Stevenson is almost as tragic, though he had enough money to take the Electric Company to court. Pat’s income of $10 an hour didn’t quite leave him in a position to complain about being unjustly fired.
As the Tape recorder tapes revealed about Jim Stevenson (yeah… Like Watergate)… The evil Plant Manager, Eldon Waugh had told the Snitch to specifically target Jim Stevenson. The way it was explained in the recording between Eldon Waugh and the Snitch (as recorded by Jack Ballard, the head of HR at the Plant at the time), if Jim Stevenson were gone, then Leroy Godfrey’s only friend would be gone… Then Leroy would have to turn to Bill Moler or Eldon for friendship….. I want to continue printing periods as you ponder this thought…..
So…. Eldon and Bill had Jim Stevenson fired as part of a bogus “Drug and Theft” ring so that Leroy Godfrey would be their friend?….. How bizarre is that? You know… I can put this all in writing because it all became public knowledge when it became part of a trial between Jim Stevenson and the Electric Company a year later. The s**t hit the fan on January 23, 1986 when Bill Moler and Eldon Waugh were attending Jack Ballard’s funeral.
Immediately after the graveside services were finished in Ponca City at the Odds Fellows Cemetery, Jim’s lawyer hit them both with a Subpoena to appear in court… The lawyer wanted to make sure the trial took place in Kaw County (Ponca City) outside the area that received electricity from our electric company. A year later, these two individuals and the company settled out of court after news about the snitch was coming out and the company didn’t want any publicity surrounding this. Both the Plant Manager and the Assistant Plant Manager were “early retired” which opened the door for a new era of Power Plant Management. Jim Stevenson walked away with an undisclosed sum of money that was at least six digits.
Pat? I found out a few years later that my wife had been working with Pat in Saint Joseph’s Hospital in Ponca City. One day after, we had moved to Stillwater, and Kelly was talking to a friend from Ponca City, the subject of Pat Braden came up. When she had hung up the phone, I asked her, “Pat Braden who?” When she explained that she had worked with a security guard named Pat Braden in Ponca City, and that he was the nicest guy you would ever meet. He cared about one thing in life and that was his daughter… I knew she was talking about our Pat Braden.
Everyone that ever met this kind soul was touched by him. It was ironic that my wife Kelly had worked with Pat for a couple of years at the hospital and I didn’t even have a clue. I knew that Pat must have known…. After all…. I was the only Breazile in the phone book in Ponca City at the time. From what I understand… Pat is still around in Ponca City doing something….. Jim Stevenson still runs “Stevenson Refrigeration Services”. Both of these are honorable men.
Note that the True Power Plant Men mourned their loss for years after this event. A certain amount of “innocence” or “decency” had been whittled away. That is until 1994 rolled around….. But…. That is another story for a much later time….
Comments from the orignal post:
Ron Kilman March 18, 2013:
I of course heard about “Black Friday” at Sooner, but it was from Eldon’s perspective. It is evil when innocent people are set up to be fired like that.
We didn’t hire any snitches at Seminole.
Originally posted May 3, 2013:
Diana Lucas entered the Electric Foreman’s office one morning at the Coal-fired Power Plant almost in a rage! I didn’t understand why at first, and I also couldn’t quite tell if she was really in a rage, or if she was just excited about something, because she seemed to be both at once. Which I guess is the case when one is in a rage, but there seemed to be a tint of amusement in her rage which was the cause of my confusion.
Bill Bennett our A Foreman had come to the shop a little earlier than usual that morning and was apparently waiting for Diane’s entrance, foreseeing her reaction. Bill had hopped up out of his chair and immediately tried to explain to Diane (yeah, her name was Diana, but most called her Diane. Well, actually, most everyone called her Dee). Diana Brien (as she was later named) seemed a little more musical than Diane Brien. Maybe it is just the Italian in me that likes to put vowels on the end of names.
Anyway, Diane was saying something like, she couldn’t believe that Bill had actually hired some particular person as a contract worker for our shop. Bill responded to her by pointing out that he would be working for her this time. If she wanted, she could have this guy doing the dirtiest and rottenest (rottenest? really? Is that a real word?) jobs. This seemed to calm her down a little and the two of them walked out into the shop.
Charles Foster, one of the electrical foremen, and my closest friend turned to me and explained that Diana and some others in the shop (Ben Davis, and I think and even Andy Tubbs) had worked for this guy when they were working for Brown and Root building the plant. He was a supervisor that was disliked by most of the people that worked for him because, well, according to Diana, he was some kind of slave driver.
Ok. When I finally understood the rage emanating from the Lady ‘lectrician, I decided I would amble out into the shop to prepare for my day performing feats of electrical magic. I also figured I would take a gander at the new figure of the old man leaning against the workbench to see the center of the conflict and to stare it in the face. I figured if I had a good close look at him, I would be able to see inside his character. I already disliked him before I walked out of the office after hearing how he had treated my mentors.
I know my memory of my first encounter with Bill Boyd is not what really happened, because in my mind I have embellished it and have rewritten it in order to include thoughts that came from deep within me. So, even though I probably walked out into the shop and glanced over at this old codger standing there, picked up my tool bucket and walked out the door, I remember it quite differently….. This is how I remember that moment (the one that really didn’t happen….. well, not exactly)….
In my mind I remember walking into the shop and noticing this tall lanky older man hunched over birdlike, almost like a raven, as his nose reminded me of a beak. A cranky looking man. He looked tired. Worn out. Like it was a struggle for him to take each breath. I thought, “Ok. This raven has come home to roost. Only he doesn’t know what hornets nest he has just stepped into.”
Sure enough. Bill Boyd was given one distasteful job after another. At least, I think that was the intention. He was tasked to sweep out the main switchgear and the other switchgears around the plant. Anything that was repetitive and boring. He worked away at his tasks without complaint. Slowly and steadily.
I noticed that Bill Boyd was taking a lot of pride in his work no matter how menial the task was. He was very meticulous. A couple of years later when he came back to work for us again, he was working for me. And at that time I had him cleaning out both of the Precipitator control cabinet rooms.
Not only did he clean the rooms to where you could eat on the floor, but he also opened each of the cabinets and vacuumed them out, and changed every one of the 4 inch square filters (2 each of the 84 cabinets in each of the two rooms — for a total of 336) filters by cutting them out of sheets of blue and white filter material using a large pair of scissors.
Bill Boyd liked to tell stories about different jobs he had throughout his career. He had worked in various places around the world. He had held all types of jobs. I think he helped build most of the important monuments that exist in the world today. At least that might be the impression you might have by listening to him tell his stories. I couldn’t disagree with him too much. After all, he was working at the most monumental Power Plant of all time right then. If he was lucky enough to do that, then I suspect that most of what he was saying was true.
One day just at the end of the day when it was time to leave for the day, I walked out of the electric office into the shop and headed for the door. Just as I passed Bill Boyd, he said rather force-ably to Andy Tubbs, “What did you say?” Andy said something back to him, and glancing back I saw that Bill had a surprised and confused look on his face.
So, as we were walking to the parking lot I asked Andy what he had said. Andy said that he told Bill that his stories couldn’t be true. Bill had asked him why he thought that. Andy had replied, “Because if you did all the things you say you did, you would have to be 200 years old!” I laughed at that. I thought…. well…. he probably is.
So, Now that I have introduced you to Bill Boyd, here is the more interesting parts of the story of Bill Boyd’s tenure at the Power Plant Palace. I have three small stories that I still often think about:
The first one is rather short, so I’ll start there…. I walked into the electric shop office one morning before it was time to begin my work day and sat in a chair. Bill Boyd was already there sitting across the room from me, silently meditating….. well…. he might have been mildly snoring…. I don’t remember exactly. Anyway. There was just the two of us in the room.
I suddenly noticed that there was a strange ticking sound. A very definite tick tick tick, like a pocket watch, only a little louder. I rose from my chair and looked around the room trying to figure out what was ticking…. It’s strange to think about it, because right outside the east wall (no. actually the north wall… I just always had my directions turned 90 degrees) of the office was the roaring steam pipes shooting high pressure steam into the turbines, creating the electricity that lit up the state of Oklahoma.
Even amid the roar of the steam pipes, I could hear this ticking. I approached Bill, and sure enough. Bill was ticking. Looking at his trousers, and his shirt pocket, I didn’t see anything that looked like a chain that may have a pocket watch connected.
The thought of a time bomb went through my head. I also had thoughts of being late for an important date, and thoughts of lunch, among other things…..
So, I returned to my seat, then I hollered out to him, “Bill!” He stirred from his sleep, um… I mean, his morning meditation…. I continued, “Bill, you are ticking!” Looking confused, he said, “What?” I replied, “You are ticking.” Bill asked, “You can hear that?” I assured him I could. He said, “Well, that’s my ticker. My pacemaker.”
Whoa. I was listening to his pacemaker from across the room! Crazy! So, after that I would hear his pacemaker all the time he was around. I guess once I had tuned into the frequency, I couldn’t get it out of my head…. I sort of had it in the back of my head that I hoped that I didn’t hear it miss a beat…. I never did… it just kept on ticking.
The next story has to do with finding a buried cable. Bill Bennett brought this specialized cable finder down to the shop one day and told us that we had to mark an underground cable that went from the main substation up to the front gate to a transformer. Someone was going to be doing some digging in the area and they wanted to make sure they didn’t cut into this cable because it was the main station power to the substation relay house.
This cable finder had one piece that you placed on the ground above where you knew the cable was buried, and then you walked along with a sensor picking up the signal from the cable.
I was all excited to go try out our new fangled cable finder. Unfortunately, we were trying to find a cable underneath some very high voltage lines (189,000 volts) leaving the substation, which rendered the sophisticated cable finder completely useless. There was too much electrical interference from our surroundings.
So, after trying to find the cable all day without success, and upon returning to the shop disillusioned with our new toy, Bill Boyd said, “I can help you find the cable.” As we wondered what he meant, he repeated, “I can find the cable for you.”
I don’t remember if it was Andy, or if I asked him just how he was going to do that. Bill replied, “By using a divining rod.” Huh? A divining rod? Yep. He was serious. The next day he came to work with two metal rods about 2 1/2 feet long, bent at one end so that you could hold them and they would point straight out in front of you.
So, I drove him over to the substation and Bill tried to use the divining rods to find the cable. He paced back and forth holding the rods up by his face, with his shoulders hunched over like a vulture… or was it a raven? After pacing back and forth for about 20 minutes he returned to the truck and said he couldn’t find the cable because the wind was blowing too hard.
The wind in Oklahoma generally begins blowing about 8 o’clock in the morning during the summer, and doesn’t let up until…. well… until… maybe the end of the summer, if you’re lucky. So, we went back to the shop. Bill Bennett was waiting to see if he was successful. Leroy Godfrey had bet that he would find the cable. We said it was too windy.
The next morning when we were driving to work, I looked out in the field by the substation and there was Bill Boyd all by himself walking slowly along with the two metal rods sticking straight out from his face.
When I arrived at the shop, I jumped in the truck and headed out to the field. Bill said that he found the cable. It wasn’t where we originally thought. It was about 25 yards over from there. He showed me that as he walked over a certain spot that his rods moved from being straight out, to swing out to the side. When he held the two rods farther apart, when he walked over the same spot, the rods came together. Bill said. The point where they cross is where the cable. is.
Ok. I wasn’t really buying this. I guess it must have showed on my face, or maybe I actually let out a snicker….. I’m not sure… I suppose it was the look of disbelieve, because I’m not prone to snicker, even when confronted with total insanity I usually just act as if it is normal. I suppose that’s because I had grown up with an Italian Mother. So, Bill turned and handed the rods to me and said, “Try it.”
So I took the two rods in my hands:
I slowly walked forward with the two rods sticking out in front of me. As I approached the spot where he had indicated the cable was buried the two rods parted until they became lined up with each other. The left one pointing left, the right pointing right. No Way! I backed up, and as I did the rods came back together. I moved forward again and they went apart! I could hear the mild excited chuckling behind me.
We took a can of orange spray paint and made a mark on the ground. then we moved about 20 feet away from that mark and did it again. Sure enough… there it was again. We marked the ground every 20 feet all the way up to the main gate. And get this. It even worked where the cable was buried under the railroad tracks. I walked down the middle of the railroad track and could tell right where the cable was buried underneath it.
So, after that, I kept my own pair of divining rods in my garage. Bill explained that you could bury a new pipe under the ground and you would not be able to find it, but after something runs through it, like water or electricity or even a wad of rags, you can find it using the divining rods.
One day a few years later, my brother was visiting my house when I lived out in the country and he was talking about someone who claimed to use a divining rod to find something, and I told him that I had a divining rod and you can use it to find cables and sewer lines and water pipes with it. — Of course, he had the same reaction I did, so we went out in the front yard and I told him how to hold them, and let him find out for himself. It only takes once. The result is so noticeable, it doesn’t leave any question in your mind when it happens.
Ok. The last story….
It turned out that over the years as Bill Boyd would come to the plant as a contract worker, we came to be friends. One day he invited me to his daughter’s recital (or maybe it was his great-great-granddaughter. I never could tell exactly how old Bill was) at Oklahoma State University where she was playing the Cello in a chamber orchestra. I was honored to be invited by him and my wife and I joined Bill and his wife as we listened to his daughter play. One day he told me the story of when he was working in Germany in 1959 and he bought a Cornelius Ryan novel called The Longest Day. After listening to his story, he told me that he wanted me to have the book.
The next day, he showed up to work with three books. The first book was from 1959. The next one was 1966, and the third one was 1974. But you could tell they were all a set, and by the way that Bill Boyd held them, they were important to him. So I accepted his gift with thanks.
I have kept books with care since the day that I received them, as I have kept my memory of Bill Boyd. A true Power Plant Raven.
Comment from the original Post:
Originally Posted May 25, 2013;
Just because there isn’t any smoke pouring out of the smoke stacks at a Coal-fired Power Plant, it doesn’t mean that the plant is offline. The power plant where I worked as an electrician in north central Oklahoma had two large Buell (later GE) electrostatic precipitators. This is what takes the smoke out of the exhaust. The smoke is referred to as “Fly Ash”. The electrostatic precipitator when running efficiently should take out 99.98% of the ash in the exhaust. When running with excellent efficiency, the exhaust can have less ash than dust in the air (or 99.999%).
Sonny Kendrick, the electric specialist and Bill Rivers an electronics whiz were my mentors when I joined the electric shop. These two Power Plant Men taught me how to maintain the precipitator. I wrote about the interaction between these two men in the post: Resistance in a Coal-Fired Power Plant. It is funny to think, 30 years later that the skills they were teaching me would determine my career for the next 18 years. You see….. I later became the Precipitator guru of the power plant. I once thought it was sort of a curse to become good at one thing, because then you were kind of expected to do that the rest of your life.
When I first joined the electric shop and they were deciding who was going to fix all the manhole pumps, the electrical A Foreman replied by saying, “Let Kevin do it. He likes to get dirty.” At that point… I think I understood why they really wanted me in the electric shop. Charles Foster had mentioned to me when I was a janitor and he had asked me if I would consider being an electrician because I cleaned things so well, and a lot of being a Power Plant electrician involved cleaning… Now those words took on their full meaning.
I knew I was destined to work on the precipitator from the beginning. Sonny had been banished to work on only the precipitator, as Bill Rivers had made clear to me when I was still a janitor (see the power plant post: Singing’ Along with Sonny Kendrick). I was his chance to be lifted from the curse that had been placed on him by our Electrical Supervisor, Leroy Godfrey. I had accepted that. I knew that I would eventually be the one to maintain the precipitators from day one.
So, here I was… One month before becoming an electrician, I had a near death experience inside the precipitator (See the post: Angel of Death Passes by the Precipitator Door). Now I was going into the precipitator again with Bill Rivers. I think at that time we were just wearing half-faced respirators and no fly ash suit. Just a rain suit.
Not a lot of protection….
I followed Bill Rivers into the precipitator while it was offline for overhaul. I had my flashlight securely strapped around my neck with a string. I had a small notepad with a pen tied to it also around my neck for taking notes.
So, as Bill entered the dark cavern of the precipitator, I found that we had just entered a new world. It was dark… Like the dark side of the moon. We were at the intake of the precipitator and we were walking on top of the ash as it was more like sand at this point. We just left footprints where we only sank about 2 inches into the pile of ash that had built up there.
Bill took his flashlight and shined it up between two sets of plates that are exactly 9 inches apart. He swung the light up toward the top of the precipitator 70 feet above. At first as the light was reflecting on all the white ash, I was blinded to the detail that Bill was trying to show me. Eventually I realized that he was pointing his flashlight at a clip. There was some kind of a clip that held one plate in line with the next.
Once I had confirmed to Bill that I saw where he was looking, he lowered the flashlight to about 45 feet above us, where there was another clip. Then even lower. About 10 feet above us. A third clip. — Now at this point… I was almost ready to resign myself to another lesson like the one I had learned from Ken Conrad as he had poured his heart and soul into his description of how to lay the irrigation hose and position the water gun 3 years earlier (See, “When a Power Plant Man Talks, It pays to Listen“), then I remembered…. “I know this is boring… but you have to learn it….” A Phrase that I made good use of 15 years later when I was teaching switching to a group of True Power Plant Men that would find themselves equally bored with the necessary material they had to learn.
Bill explained….. Each clip must (and he emphasized “Must’) be aligned with the next plate. Every clip must be in their place. Don’t start up this precipitator until this is so. Ok. I understood…. Let’s see… there are three clips between each of the four plates… or 9 clips per row…. and there were 44 rows of plates for each section…. and there were 6 sections across the precipitator, and 7 sections…. hmmm… that added up to oh… only 16,632 clips that I needed to check during each overhaul… ok… I took a note on my notepad…
Bill explained….. Clean each insulator. there is one on the side of each bottle rack holding all the wires in place.There were only 4 for each 2 hoppers. there were 84 hoppers, Great. Only 168 insulators on the bottle racks…. Then he pointed out that there were also insulators on the precipitator roof. two on each section over each pair of hoppers… One on the tension house on one connected to the transformer, or 336 more… making a total of 504 insulators that need to be inspected and cleaned during each overhaul.
Bill explained…. you need to check each of the wires to make sure they aren’t caught on a clip or broken. Let’s see…. there were 44 rows of wires in each section… with 16 wires in each row…. and there were 6 sections across each set of hoppers…. that came out to exactly 29568 wires that needed to be inspected during each overhaul.
Bill explained…. each rapper on the roof needs to be tested to make sure they are rapping with the correct force. That meant that they each needed to lift at least 6 inches before they dropped the 15 pound slug (to knock the ash off of the plates into the hoppers below. Hmm… For each 4 hoppers, there were 6 rows of 12 rappers each. There were two sets across the precipitator and there were 7 sets of rappers. In other words…. there were 672 rappers on the roof of the precipitator.
Bill explained…. each vibrator on the roof needs to be calibrated to provide the maximum vibration to the wires inside the precipitator in order to make sure they cleaned the wires of any ash buildup as they are responsible for delivering the static electricity to the precipitator that collects the ash on the plates. In order to calibrate them, you had to adjust the gap between the main bracket and the magnetic coil to within a few thousands of an inch… I don’t remember the exact setting now… but we used a set of shims to set them correctly. There were 12 vibrators for each of the two sides of each of the seven sections of hoppers. This came out to 168 vibrators that need to be adjusted during each overhaul. Oh. And each vibrator had an insulator connected to the wire rack…adding 168 more insulators.
So, we had 16,632 clips, 672 insulators, 29568 wires, 672 rappers and 168 vibrators that all needed to be in good working order at the end of each overhaul (on each of the two units). Throughout the years that I worked inspecting, adjusting and wrestling with plates, clips and wires, I became personally attached to each wire, insulator, clip, rapper and vibrator. For a number of my 18 years as an electrician, I was the only person that entered the precipitator to inspect the plates, wires, clips and internal insulators. Some of my closest friends were precipitator components. Each diligently performing their tasks of cleaning the environment so that millions of people wouldn’t have to breathe the toxins embedded in the ash particles.
We hired contractors to go into the precipitator to help me. I would spend an entire day teaching them how to wear their full face respirator and fly ash suit…. How to inspect the clips and wires…. how to walk along the narrow beams along the edge of each row of 84 hoppers on each unit to find and repair the things that were not in proper alignment. I would check out all their equipment and give them their safety training only to have them not show up for work the next day.
Contractors would gladly be paid to weld in the boiler hanging from a sky climber in the middle of space 200 feet above the bottom ash hopper, but give them one day in the precipitator and they would rather be thumbing a ride to Texas…. I should have felt insulted… after all this was my home…. Mark Fielder the head of the welders once called it my “baby”. I knew he had never had to endure the walk on the moon when you entered the tail end of the precipitator and found yourself buried waste deep in light fly ash. I told Mark Fielder to not call the precipitator my baby… Not until he could find a contractor that was willing to work alongside me inside it. He apologized. He explained that he meant it with affection.
At the back end of the precipitator, you just sank to the bottom of a pile of fly ash when you stepped into it. The fly ash particles there are less than 2 microns in diameter. That meant that they would infiltrate your filter and bounce around inside your respirator on their way down into your lungs. Building up a permanent wall of silicon in your innards that will be there until the day you die.
I noticed that after a few days of working in the precipitator that I would feel like I had the flu. This would happen after I would smell this certain scent in the precipitator that would develop after the unit had been offline for a week or so. I noticed that when I burped, I could taste that smell in my mouth. I also noticed that if I had to pass some gas, that the smell would also include the smell that I was experiencing in the precipitator.
I didn’t think much about it until one day when I went to the tool room and Bud Schoonover told me that they were out of the regular hepa-filters for my respirator. So, instead he gave me a pair of organic filters. They had a different carbon filter that absorbed organic particles. I said, “Thanks Bud.” and I headed out to climb into the precipitator to continue my inspection of some 30,000 wires, and 16,000 clips.
To my astonishment, when I used the carbon filters right away, I didn’t smell the acrid smell. The flu symptoms went away, as well as the smelly burping flavors. Not to mention (oh.. but I am) the passing of gas without the additional smell of precipitator internals…. Crazy as these seems… I became obsessed with finding out why.
You see… at the same time that this particular smell arose in the precipitator, any ash that was built up on the plates would clump up and with a simple bang on the plates with a rubber mallet would cause all the ash to fall off leaving a perfectly clean plate. Before this smell was there, you could bang on the plates all day, and the ash would remain stuck to the plates like chalk on a chalkboard.
I had our famous chemist (well…. he was famous to me… see the post: A Power Plant Doctor Does a Jig in a Puddle of Acid), come out to the precipitator to give it a whiff. He said it had some kind of a sewer smell to it…. I didn’t expand on my personal sewer experience I had had with it, though I did tell him about the burping….
He encouraged me to have the safety department come out and test it to see if they could identify the chemical that was causing this smell. You see…. It was important to me because if we could pin this down, then we might be able to inject a substance into the precipitator while it was online to clean it without having to bring the unit offline if the precipitator was to become fouled up.
There was a young lady from the safety department (I think her name was Julia, but I can’t remember her full name). She came from Oklahoma City and gave me some monitors to put in the precipitator while the smell was present to try to track down the chemical. Unfortunately, we never found out what it was. In the meantime, I had learned all I could about Van Der Waals forces. This is the week molecular force that would cause the ash to stick to the plate.
I studied the chemical makeup of the ash to see if I could identify what chemical reactions could take place… Unfortunately, though I knew the chemical makeup of the ash, the chemicals were bound in such a way from the high temperatures of the boiler, that I couldn’t tell exactly how they were arranged without the use of an electron microscope. I wasn’t about to go to Ron Kilman (who was the plant manager at the time) and ask him for one. I had already upset him with another matter as you will learn in a much later post.
So, I just continued wearing the organic filters. This gave me the strength to continue my inspections without the flu-like symptoms. Later on, I taught Charles Foster and Scott Hubbard how to maintain the precipitator. When I finally left in 2001, I know I left the precipitators in competent hands. They knew everything I did.
One main lesson I learned from my experience as the precipitator guru is this….. You can be a genius like Bill Rivers or Sonny Kendrick….. when you are given a particular job to do and you do it well, you are usually pigeon-holed into that job. One of the main reasons I write about Power Plant Men is because they are for the most part a group of geniuses. At least they were at the plant where I worked in North Central Oklahoma. They just happened to stumble onto the jobs that they had. They would probably spend the rest of their working career doing what they did best…. never moving onto something where their genius would shine and others would know about them… That is why I write about them.
Do a job well, and you will be doing it until the day you die…. that’s what it seemed to be. I didn’t feel like I was banished to the precipitator as Sonny Kendrick was by Leroy Godfrey, who did it consciously. No. I was “banished” to the precipitator for the next 18 years because I was good at it. I loved it. I may have mentioned before, but I had a personal relationship with the 168 precipitator control cabinets.
I had carefully re-written the programs on each of the eprom chips on the Central Processing Unit in each cabinet to fit the personality of each section of the precipitator. I had spend hours and hours standing in front of each cabinet talking to them. Coaxing them. Telling them that they could do it with my handheld programmer in hand…. helping them along by adjusting their programming ever so slightly to give them the freedom that they needed to do their job. If they had been human……. I would have given them names like “Mark”, or “Thomas”, or “Millie”. Instead, I knew them as 2E11 or 1B7. But they were each my friends in their own way.
You see… I look at friends like this…. It’s not what they can do for me…. It’s “what can I do for them?” I have had some precipitator cabinets that I have given extra attention because they seemed to need it more than the others, only to have them crap out on me. I wouldn’t have done anything different if I had known all along that they wouldn’t pull through.
I have my own understanding of who I should be. My wife may call it “stubbornness”, and that may be what it is. I would try and try to coax a control cabinet to do what it was created to do, only to have it fail over and over again…. What was I going to do? Give up? How could I do that to a friend? I would tell the cabinets that were especially difficult (when I was alone with them – which was usually), “You create your own Karma. That isn’t going to change who I am.”
Today I am called an IT Business Analyst. I work for Dell Computers (now I work for General Motors). It is an honor to work for a company that serves the entire world. I see the same pattern. When you do something well, when you love your work and become attached to it, you become pigeon-holed into a particular job. You become invaluable. Almost irreplaceable. People look to you for answers. They are comforted to know that someone who cares is taking care of business. I am glad to be able to serve them.
Weeks before I left the power plant, Bill Green, the plant manager asked Jim Arnold (the supervisor over maintenance) again….. “What degree is Kevin getting again?” Arnold replied, “Oh. nothing anyone wants.” (an MIS degree from the college of business at Oklahoma State University). Bill was concerned that if I left they wouldn’t have anyone to take care of the precipitators. No. I wouldn’t do that. Like I said… Each of the 168 precipitator control cabinets were my friends…. I had given them the best guardians I could find… Scott Hubbard and Charles Foster.
Recently Charles Foster has retired from the plant, and his health is not good. His son, Tim Foster has taken his place. One of the last things Tim has told me recently was that he was going with Scott Hubbard to work on the precipitator. I wanted to reply back to his e-mail… take care of my friends Tim…. I know Scott understands….
Each clip, each wire… I often dream about them…. Row after row….. looking 70 feet up, then down… swinging my flashlight in the darkness. Betty, Tom, Martin…. all the clips on this plate are in their place…. Sandy, David, Sarah… lined up correctly… Fred, Chuck, Bill…. good… good… next row….
Originally Posted February 14, 2014:
There has been reports on the news this week about someone who has been shooting transformers in PG&E (Pacific Gas and Electric) substations in California. It is interesting that the national news is picking up this story now even though the FBI has been investigating similar attacks since December, and even earlier attacks against PG&E as early as last April, 2013.
These reports always catch my attention because back in the early 1990’s, the electric company where I worked in Oklahoma had their own episode when a shooter was going around shooting at substation transformers, and high voltage electric lines. At that time it was OG&E, not PG&E that was being plagued by someone that seemed to be randomly attacking the electric grid.
Back in early 1993, the first transformer that was shot by a high powered rifle using armor piercing bullets was in the middle of Stillwater Oklahoma near the Pizza Hut on Perkins Road. It is easy to remember the location, because it later became very significant when it came down to finding out who might be responsible.
Much like the reaction in California this week, everyone was alerted to keep a watch for anyone acting suspicious near substations and high voltage electric lines.
I enjoy watching a TV show called Forensic Files. It shows how important facts are collected that finally lead to a conviction of someone who has murdered someone. It is amazing how so many clues are left behind that can be used to prove who is the guilty person.
I suppose the main point that I walk away with after watching a show like this is that criminals are generally pretty stupid. Especially the really smart ones. I guess it’s because if they were really smart, then they wouldn’t have turned to a life of crime in the first place. Maybe it’s like the lazy people that work harder avoiding work than they would if they just did their job.
Of course, working at the Power Plant during this time meant that we were all put on a kind of “high alert”. We were extra suspicious of cars parked down side roads near our plant. Our security guards doubled up a little on their rounds on the lookout for someone suspicious. In a weird way it brought me back to when I was a dishwasher one summer at the Sirloin Stockade in Stillwater.
When I first moved to Stillwater in the Spring of 1978, right out of High School, I went to work as a dishwasher/busboy/cook at the local Sirloin Stockade franchise restaurant. This is not the newer company Sirloin Stockade that is on Perkins road today. No. This one was on the Strip next to the Oklahoma State University campus. It was privately owned.
One night during that summer there was a mass murder committed at a Sirloin Stockade in Oklahoma City after the restaurant had closed. All of the employees had been forced into the freezer and they were all shot in the head. At the time, no one knew the motive. It could have been that the murderer (or murderers) could have been upset with Sirloin Stockades in general.
For the rest of the summer, the manager Ken Low, who also managed a hamburger joint up the street for the same owner, would leave the Sirloin Stockade when the restaurant was just closing at 9:00 to go close the other restaurant. He would leave a young 17 year old boy in charge of closing up the restaurant and getting it ready for when it opened the next morning. Yeah…. That was me.
I didn’t think it was a coincidence that Ken had suddenly gained a lot of confidence in my ability to handle closing the entire restaurant all by myself the same week that the Sirloin Stockade Massacre happened in Oklahoma City. Ken was a friend of mine and I understood him well enough.
Me. I was fearless anyway. I always seemed to be missing that gene. So, I just felt that if some murderer came busting in the back door, I would, of course, defend myself by using the handle of the broom I was using to sweep the floor. Well. I was 17. So, of course I was invincible.
end of side story.
The same question was being asked about the person that was shooting the transformers and high voltage lines. It seemed as if he had a grievance with the electric company. So, when a witness had seen a man going down a remote country road in the same area where a high voltage electric line was shot, and a sketch of a possible suspect was created, they turned to the employees for help.
I wasn’t much help because I lack the imagination to take a composite drawing and extrapolate it into a person that I know. If someone were to draw a picture of me and ask me who I thought it was, I probably wouldn’t have a clue. I guess I lack that gene also.
Other Power Plant Men thought they knew who the drawing depicted. It reminded them of a former employee at the Power Plant. His name was Clyde Bateman. When others told me that, I thought, “Yeah. I suppose it could be him.”
Clyde had been a chemist at the plant. He had been fired a year or two before. It wasn’t that he wasn’t doing his job well. His problem was that some days he just wouldn’t show up for work without leaving any word. It would have been all right if he would have called the plant to let his manager, George Pepple know that he wasn’t going to be able to make it that day. He just wouldn’t say anything until he returned.
Clyde had been given the appropriate number of warnings and was told that if he didn’t show up to work again without leaving word that he wouldn’t be in, he was going to be fired. So, the next time that happened, he was “let go”. No one likes that to happen, because you know that there is some underlying reason for such odd behavior, but we had to keep the plant running, and when you rely on a certain number of employees to keep it going, what can you do?
This by itself wouldn’t make one suspicious that he might turn into someone that would flip his lid and start shooting at electric company assets. The psychological profile looked more like a Timothy McVeigh type character. For those of you who are from other countries that read this blog, Timothy McVeigh was a “homegrown” terrorist that decided to blow up a Federal Building in the middle of Oklahoma City one day (along with a number of other accomplices, most of which have never been identified), and he needlessly killed a lot of innocent people.
I didn’t know Clyde that well, so when others suggested that it might be Clyde, I was skeptical. Then, as the investigation went forward, I learned that Clyde was more like Timothy McVeigh than I had realized. — Well. At the time, no one had heard of Timothy McVeigh, since that hadn’t happened yet.
Power Plant Men that knew him said that he owned some land behind our power plant and he would go out there at times and blow things up. He like high powered rifles and all that. I thought that might be an indication, but it still didn’t convince me. I also liked to blow things up and I would enjoy shooting high powered rifles if I had the opportunity. I’m sure many Power Plant Men would enjoy doing the same.
Remember. This was back when it was still all right to play cowboys and Indians, and cops and robbers. This was before eating your Pop-Tart until it was in the shape of gun was never given a second thought. You could even take a Cowboy doll onto a plane with a tiny 1/2 inch plastic gun in the holster without being afraid that the TSA would take it away.
Anyway. It was later discovered that Clyde Bateman lived in a trailer park behind the Braum’s on Perkins Road in Stillwater.
This was important because his trailer was only about 250 yards from the first transformer that had been shot. Ok. With all the other things, this finally convinced me. They were on the right track. I think the OSBI (Oklahoma State Bureau of Investigation) was on his trail and were keeping close tabs on him. It seems like they even asked us at the plant to not try to contact him or let him know that he was a suspect.
Scott Hubbard, a True Power Plant Electrician was out inspecting the equipment in the substation one day when he noticed a hole in one of the 345KV breaker operating arm enclosures. Scott thought it looked a lot like a bullet hole, so he alerted the control room. The control room contacted the T&D (Transmission and Distribution) department to come out and look at it.
Sure enough. It was a bullet hole. The OSBI recovered the bullet from inside the pipe. Luckily where the bullet had entered, it had missed hitting anything that would have damaged the equipment. If the shooter had been a lineman, or an electrician, or from the T&D department, he would have not shot the part that he did. It looked like a critical part if you didn’t know better. So, the shooter was not familiar with the equipment he was shooting. That was clear.
Not only that, but there were much worse targets in the area that would have caused real damage. So, luckily this was not someone who did a lot of homework. It was interesting that the first transformer was only a block away from where Clyde lived, and the last shot was at the plant where he used to work.
The breaker was at a spot where he would have had to know to park on a dirt road a mile away and walk across a field to get the shot that he did. All the plant employees knew that road well. It was where the public had to go if they wanted to fish in the discharge channel where the warm water exits the condensers. The fish like it there.
With all that said, Clyde Bateman was due in court in Ponca City on August 11, 1993. Not for being the shooter that everyone was looking for, but for another offense. I don’t remember exactly what it was. He never showed up. Clyde took his own life that morning. After that day, there were no more shootings associated with this particular shooter. it was understood by the employees at the plant that the matter was behind us now. Business was back to usual.
I mentioned earlier that Clyde turned out to be more of a Timothy McVeigh type than we had originally thought. I didn’t mean that he was that way because he liked guns, because any self respecting Power Plant Man knows that if you care about your family and want to keep them safe, that a handy firearm is the best way to stop an intruder.
Clyde was an activist. I found this out only today when I decided to write about him. I found a very interesting case that the U.S. Court of Appeals, 10th Circuit ruled on only two and a half months after Clyde’s death. You see, Clyde had filed a complaint against the Federal Government alleging that the entire body of federal environmental laws were unconstitutional, because its enactment allegedly exceeded the authority granted in the Commerce Clause of the United States Constitution, and lacked any other source of constitutional support. The District Court had ruled that Clyde had no standing. So he appealed it to the US Appeals Court.
The Appeals court ruled unanimously that Clyde didn’t have any standing to bring this complaint against the Federal Government because (no… not that he was already dead) he hadn’t demonstrated that he was injured by the law. They didn’t rule that he was wrong about his complaint, only that he didn’t have any standing to file the complaint.
So, as Paul Harvey would have said, “Now you know the rest of the story.” If you want to read more about the Appeal Courts decision, you can find it here: “Clyde Bateman v United States of America“
A year after I joined the electricians in the electric shop, Howard Chumbley became my foreman. One day when we were talking about going to the old Osage Plant up the road to clean up a PCB (Polychlorinated Biphenyls) spill, he explained that “In His Day” they used to clean their tools in a vat of transformer oil that was full of PCBs. I remember him telling us that it was normal for him to be up to his elbows in the stuff. They never thought it might be harmful. Now we were getting ready to go up to the old plant to clean up a small spill and I was going to have to suit up in a special hazardous waste suit. I wrote about our experience in the post: “Pioneers of Power Plant Fame Finally Find Peace“.
Now we know about the hazard of developing cancer by having PCBs in your system. Today we know a lot of things we didn’t know back then. We know that Asbestos causes Mesothelioma. We know that Chlorofluorocarbons (CFC) destroy the ozone layer. We know that Twinkies are one of the few foods that will be around after a nuclear holocaust.
Years before I became an electrician, the Electric Company had stopped using oil with PCBs. There was still an effort to clean it up from the older plants. At the new coal-fired power plant in north central Oklahoma, we didn’t have a problem with PCBs. We had other problems. Some of which we didn’t know about (well, we knew something, just not so much) at the time.
A very prominent responsibility of mechanics and electricians was to clean oily equipment. Pumps and motors, breakers, fans, mills. All kinds of equipment. Almost everything was lubricated one way or another with oil. Solvent was used to remove the oil when the equipment needed to be cleaned.
We had a standard kind of solvent at our plant. I believe it was called “Standard Solvent 350”. See…. It was a Standard solvent. Even had the word Standard in the name. One of the key ingredients of this standard solvent is a solvent known as “Stoddard Solvent”. This solvent worked real good when cleaning up equipment like motors and pumps and other oily equipment. Many times we were “Up to our elbows” in this solvent.
We had a barrel in the corner of the electric shop close to the door to the main switchgear where we could put a motor and scrub it clean while solvent poured out of a flexible nozzle on the motor, your shirt, your pants, your work boots, and the floor. Some days during overhauls when we would work cleaning motors for 10 hours each day, I would come home from work drenched in solvent. My wife would make me take my clothes off in the utility room where I could put them directly into the washing machine where Oxydol could go to work on it right away.
When Ted Riddle and I were working for Willard Stark on an overhaul at the gas plant outside Mustang Oklahoma during the spring of 1986, Willard said one day that he wanted to show us something. I explained Willard’s situation at the plant in a post called “Working Power Plant Wonders with Willard Stark“.
He was a good example of what I would call a “Contrarian.” That is, he seemed to buck the system often. He thought outside the box a lot. I realized this right way when we would listen to Paul Harvey on the radio during lunch. Every time Paul Harvey would say, “…Noon News and Comment” Willard would always finish the sentence by saying, “Mostly Comment.” I figured then that he had to be a contrarian, because who would ever think that Paul Harvey wasn’t the best person in the world to bring the News to our private little power plant world.
So, when Willard said he was wanted us to see something “with our own eyes”, I figured this was going to be something good. Probably some kind of secret place where you could hide and take a nap if the day wore on too long, or something like that. Well… It didn’t turn out to be that kind of “something”, but it was something.
Willard took a small metal pan and put some Stoddard Solvent in it. The old gas plant used straight Stoddard Solvent, unlike the more sophisticated Coal-fired plant where Ted Riddle and I normally worked. We walked out into the turbine-generator (T-G) floor. He placed the pan of solvent on the floor, took a WypAll (which is a strong paper rag) and dropped it into the pan:
Then he bent down and with his lighter, he lit the WypAll on fire. We watched as the flames grew higher and higher. Willard watched our expressions. We had been under the understanding that Solvent was not flammable. He explained that technically, Stoddard Solvent is not considered “Flammable”, but it is considered “Combustible”. Combustible means that it burns.
Stoddard Solvent doesn’t ignite fast enough to be considered “Flammable”. At least that’s the way Willard explained it to us. Willard said he wanted us to be aware of this fact when we have our bodies all soaked in solvent, that if we were to catch on fire for some reason, we were going to go up in flames just like that WypAll. We both appreciated the advice.
I didn’t begin this post expecting to say that much about Stoddard Solvent, but just in case you were really wondering what it is, maybe this picture will explain it to you:
I hope that cleared it up for you. You have to wonder why they put that “Oh Oh” down there at the bottom. Almost as if something is supposed to go wrong.
The solvent I really wanted to talk about was one that was used more exclusively in the electric shop. It is called Trichloroethylene 1.1.1. You see, a lot of equipment that we cleaned in the electric shop needed to be cleaned spotless. Solvent 350 would leave a film when it dried. So, in the electric shop when we needed to clean something with electric contacts we would use something called “Electro Contact Cleaner”:
This was very expensive compared to the regular solvent. So, I was surprised when Ben Davis and I first went on an overhaul in Muskogee, and they had this exact same contact cleaner in 55 gallon barrels:
I remember John Manning showing us a few of these barrels that they had ordered for the overhaul. I think my jaw dropped. By my calculation, one barrel like this would cost over $3,000.00. I figured if it was in cans, it would have cost three times that amount. The advantage of using Contact cleaner was that it dried clean. It didn’t leave a residue.
Trichloroethylene 1.1.1 was like that. It didn’t leave a residue when it dried. I think this will become obvious to you when you see what it really is:
You can see right off the bat that this is going to dry clean… I mean…. it’s obvious… right? I think the CLs on three of the corners indicate that it “Cleans” 3 times better than other solvents.
Anyway. This stuff evaporated quickly so when you were up to your elbows in this solvent, it felt cool because it would evaporate causing a cooling effect. It had a very peculiar smell. It also made you feel a little dizzy when you were using it. Especially when you had to breathe in a lot of it in a confined area. Having fans blowing on you seemed to make it worse, because it would increase the evaporation rate filling the air with more solvent.
It was known at the time that Trichloroethylene would destroy your liver when it gets into your blood stream. There was no quicker way of injecting the solvent into your blood stream than by inhaling it. Finally OSHA decided that this solvent was no longer safe to be used in a plant setting. It could only be used in small quantities like “White Out”.
Gee… Who remembers White Out?
The last time I heard about white out was in a blonde joke about someone using white out on the computer monitor. Who types anymore on a typewriter? I think anyone today that would choose to type on a typewriter would be the type of person that would prefer a typewriter eraser over white out.
I take that back. The last time I heard about White Out was on a show like 60 Minutes where they were showing young kids in Panama or another Central American country being hooked on tubs of White Out. They would sit around all day taking quick whiffs from a tub of White Out. — Why? Because it contained Trichloroethylene and it would give you a buzz.
My dad, a Veterinary professor at Oklahoma State University had told me about the dangers of Trichloroethylene around the time I told him about Bill McAlister using WD-40 on his elbows to ease the pain of his arthritis. Sonny Karcher had asked me to talk to my dad about it to see if he knew why WD-40 would help Arthritis.
My father (I’ll call him Father in this paragraph, because in this paragraph, he’s being more “sophisticated”) told me that WD-40 had the same chemical in it that Veterinarians used on horses to help their joints when they hurt. Then he warned me that the solvent in WD-40 soaks right into your skin and when it does it carries other toxic chemicals into your body than just the arthritis lineament. So, he told me to tell Sonny not to use it often.
So, anyway, we had to find a replacement for Trichloroethylene. Tom Gibson and Bill Bennett went to work ordering samples of other kinds of solvents that salesmen were saying would be a good replacement. One of the first that we tried was called Orange Solvent. It had a real nice Orange smell. Sort of like drinking Tang.
It had a couple of problems. First, I would be more inclined to drink it since it smelled so good, and I was a fan of Tang at the time.
The second problem with the Orange Solvent was that it didn’t seem to clean very well. We were used to something cutting the oil and contact grease quickly. the Orange Solvent didn’t cut the mustard (so to speak).
One day during overhaul at our plant, Bill Bennett gave us a barrel of some new kind of solvent. It was supposed to be comparable in it’s cleaning ability to Trichloroethylene (could you imagine Red Skelton trying to say that word?)
Bill wanted Andy Tubbs and me (I know! It seems as if it should be “Andy Tubbs and I”, but “me” is the correct way to say it) to use the new solvent on the main power transformer main bus connectors. They are normally covered with No-Ox Grease so this would be a good test.
So, Andy and I carried the large extension ladder out to the Unit 1 Main Power Transformer and leaned it up against the back side (the transformer’s backside, not ours). We climbed up to the open hatchways and crawled in. We hung a small yellow blower in the doorway to blow fresh air on us.
Andy and I had everything setup and we were ready to work. We both just fit in the small area with the large bus work between us. We began using our rags soaked in the new solvent on the silver plated bus. I don’t remember how well the solvent cleaned the bus. I just remember thinking that this solvent sure did evaporate quickly. Especially with the blower fan right next to us.
I also remember looking over at Andy crouched across from me. He was looking down at the bus. Then his entire body seemed to swivel around as if he was on some kind of swing which caused him to tilt up the side of the enclosure. I watched his face, and he seemed to be saying something to me, only I couldn’t make it out.
I think I said something like “Huh?” Then about that time all kinds of brightly lit flowers were circling around my head and my arms seemed to be floating in front of me. I heard Andy say with a slur, “We butter git outta here…” His voice sounded like it was in a pipe…. Well, we sort of were sitting in a pipe… He started to move toward the hatchway.
I remember briefly thinking that I was just fine enjoying the interesting scenery. By now there were bright lights streaming toward me from all sides. Then I thought. “No. I better leave.” So, I struggled to pull myself into the hatchway. It was big enough that we could both pull ourselves out together.
I began climbing down the ladder head first. It was about 15 feet to the ground. I was completely out of the hatch with my body completely upside down on the ladder before I decided that it would be better if I turned over and went down feet first. Somehow I managed to swing my feet down and around without falling off the ladder. I think Andy was pretty much in the same predicament as I was.
Once we were on the ground, we hobbled into the electric shop and sat down. We told Bill Bennett that this was not a good solvent to use. I don’t even want to remember what the name of the solvent was. If I mentioned it, someone may put it in some tubs of white out and sell it to kids in Panama, because Trichloroethylene had nothing on this.
I suppose we finally found a replacement solvent. Though, I don’t remember what it was. All I do know is that it was quite an adventure trying to find one. Maybe we just used a lot of Electro contact cleaner after that.
Like Howard Chumbley, who told stories about being up to his elbows in transformer oil made with PCBs, I can now tell my fellow teammates at work, “Yeah. I remember the days when we were up to our elbows in Trichloroethylene. Never gave it a second thought.” Only, their reaction would be a little different than ours were in the electric shop office. They might raise their eyes up from their computer monitors and look across the cubicle at me for a moment. Then give me a look like “there goes that crazy old guy that used to work in a power plant again. Hasn’t he told us that story about 50 times already?” Well…. That solvent and stuff. It makes you forget things…. I can’t remember what I have already said.
Comments from the original Post: