From Power Plant Rags To Riches
Originally posted on March 9, 2013:
There is one item that all Oklahoma power plant men carry with them almost every day. Whether they are electricians working on a motor, a mechanic pulling a pump, or an operator making his rounds. All of them carry and use this one item. It is so important that, without it, it would be difficult for the maintenance shop to function properly.
This item of course is a rag from the Chief Wiping Cloth Rag Box:
Every Power Plant Man uses Chief Wiping Cloths on a daily basis
As an electrician, I used rags all the time. Whether I was working on a breaker, doing battery inspection, elevator maintenance or just looking for a clean place to sit my back side, I had to have a rag from the box of Chief Wiping Cloths. Chief Wiping Cloths come from the Oklahoma Waste & Wiping Rag Company in Oklahoma City.
When I was on the labor crew, I was dirty all the time. I was doing coal clean-up, digging ditches, pouring concrete, shoveling bottom ash and wading through fly ash. I had little reason to stay clean or to clean things. My life was full of dirt and grime. I was always dirty, so much so that when I went into the electric shop in 1983 and Bill Bennett was talking to Charles Foster about who should repair the Manhole pump motors, Bill told Charles, “Let Kevin do it. He enjoys getting dirty.”
I didn’t argue with Bill, because, well…. what was the point. But as an electrician, I not only had desired to have a cleaner job, but I also wished to fulfill Jerry Mitchell’s prophesy that “When I become as good as him, I will be able to remain clean even in the face of “Coal Dust and Fly Ash” (See the post A Power Plant Man Becomes an Unlikely Saint). The boxes of rags were my opportunity.
So, when I left to go on a job, I would always grab at least a couple of rags from the box and put them in my tool bucket and at least one hanging out of my back pocket. That way, if I needed to plop down on the ground to unwire a motor too low to sit on my bucket, I could sit on a rag on the coal dust covered ground instead. This helped my goal of remaining as clean as possible.
It’s funny that years later I should miss the boxes of rags that I used to use to do my job. There was more to it than just the rags I used to wipe my hands, battery posts, greasy bearings, breaker parts and my nose. You see, these rags were made from recycled clothes. Yes. They were sterilized for our use, but these were from recycled clothes.
Actually, the Oklahoma Waste and Wiping Rag Company, founded in 1940, was one of the largest purchasers of donated clothing in the country. That meant that many of the rags we used in the rag box were actually worn by someone. Sure, a lot of the rags came from defective clothing from factories, but some of the rags had been clothes actually worn by a person.
As odd as it may sound, while I was grabbing rags from the rag box, I was thinking (at times… it wasn’t like it was an obsession with me), that these rags may have been worn by someone for years before ending up covered with bearing grease by my hand and tossed into a proper Fire protection trash can.
Trash cans like this were used because they prevented oily rags from burning down the shop when they would spontaneously “combust”
So, anyway….. Thinking about how these rags were possibly once worn by people throughout the United States, I felt that some of the rags had a specific connection to some unknown person somewhere. So, I would actually go through the rag box looking for pieces of rags that I felt had been worn by someone before. You know (or maybe you don’t), rags that had an aura around them like someone had once had a “personal relationship” with them.
I would take these rags and I would “pseudo-dress up” in them. So, if it was a rag made out of a pair of pants, I would tuck it in my belt and I would carry it that way until I needed it. In a weird way (and I know… you are thinking a “really weird” way), I would feel connected to the person that had worn this piece of clothing in the past. I felt as if I was honoring their piece of cloth just one last time before I stained it with coal dust, fly ash, or snot, just one last time.
And in my even weirder way, I would sort of pray for that person, whoever they may be. I would even, kind of, thank them for the use of their old clothes (I know, I stretched the English Language in those last two sentences to meet my unusual need).
I have a picture in my mind of myself standing on the platform of the 6A Forced Draft Fan at Muskogee in the fall of 1984 (one year after becoming an electrician), dressing myself up in pieces of clothing from the rag box, all giddy because I had found enough pieces to make an entire outfit made of half male and half female clothing. Ben Davis, who was on overhaul at Muskogee with me from our plant is shaking his head in disbelief that he had to work with such a goof. Not exactly sure who he has been assigned to work with… — I actually felt sorry for Ben. I knew I was a normal person. The trouble was… I was the only person that knew it (For an explanation about where that phrase originated, see the post “Bobbin’ Along with Bob Kennedy“).
Ben Davis
Levity is healthy. And at times when stress is at its greatest, levity is a way back to sanity. Just today I was invited to a conference call to discuss something that I was working on, and when I was done, I stayed on the line even though I was no longer needed. As I listened, one person on the other end was remarking about how he enjoyed his team so much because they were able to crack up and reduce the stress by being humorous.
A friend of mine, and fellow teammate Don McClure who had invited me to the call was coming up with one “one-liner” after the other. They were “spot-on” and very funny (as he usually is — ok. He’s going to correct me on the “usually” part). But he said one thing that hit home with me. He said that he had been in the Hot-seat so long that he had to put on a pair of Asbestos underwear.
This, of course, made me immediately think of the asbestos gloves we used to wear in the electric shop before Asbestos had been formerly outlawed. We had an old pair of asbestos gloves from Osage Plant ( to find out more about the Osage Plant read about it in the post Pioneers Of Power Plant Fame Finally Find Peace).
Asbestos Gloves worn when putting hot bearings on a motor shaft (for instance)
Along with the rags in the rag box, when I used to put on the asbestos gloves I used to think of Howard Chumbley (who died on August 4, 1998 at the age of 70), at the age of 24 working at the Osage Plant, before his hair turned to gray and then to white, wearing these same gloves while he pulled a bearing off of a heater and slapped it onto a motor shaft.
Here Lies Howard Chumbley
It gave a special meaning to motor repair. Even though Howard retired from plant life in 1985, for years I could put on his old pair of asbestos gloves and feel like I was stepping into his young shoes. I would think… If only I could be a true “Power Plant Man” like Howard…. I love Howard with all my heart, and today, I have never met a better human being than him.
Note that in the picture of Howard’s gravestone it says that he was an EM3 in the Navy. This is an “Electrician’s Mate 3rd Class”. There is no way I was ever going to measure up to Howard. He was a hero to his country and a man of great integrity and humility. If I had saved up all the nice things I had done in my life and done them all on one day, I may have slightly resembled Howard on a regular day. Just like Jim Waller that I had discussed in my last post… Only Men of the greatest integrity measure up to be “True Power Plant Men”.
This made changing the bearings on a motor almost a sacred event to me. I don’t know if the other electricians felt what I felt, but there was something about placing those gloves on my hands that seemed to transform me for a moment into someone noble. I never mentioned it to them (which was odd, because I was usually in the habit of telling them every little crazy thought that entered my head).
I remember at break time one day Margie Belongia (who was a plant janitor at the time) telling me in 1981 when I was a summer help, that she wanted to go to hell because that was where all of her friends would be. I asked her at the time how she was so certain that being in hell guaranteed that she would be able to be with her friends, and she was taken aback by my question. “What do you mean? Why wouldn’t I be with my friend?” — I responded, “Suppose in hell you are alone. With no one but yourself.” I think I unnerved her by my response. She said that she had never considered that. She had counted on being with her friends. They had all decided that was the way it was going to be.
At any rate. I kept her thought in my mind. I hope every day that someday I will be able to walk up behind Howard Chumbley (not in hell of course, the other place) and just stand there and listen to him tell stories about when he worked at the old Osage Plant, and how he used to be up to his elbows in oil that contained PCBs and never thought twice about it. Or how he played a harmless joke on someone dear to him, and he would laugh….
Howard was my foreman for only about 5 months before he retired. I remember sitting in the electric shop office for a year and a half during lunch listening to him tell his stories. He would grin like Andy Griffith and laugh in such a genuine way that you knew that his heart was as pure as his manners.
Andy Griffith in this picture reminds me of Howard Chumbley
To this day I know that I have never been richer than I was when I was able to sit in the shop and listen to Howard Chumbley pass on his life experience to us. Even years later when I was able to slip on the pair of Asbestos Gloves worn by him years earlier I could feel that I was following in his footsteps. Just the thought of that would make me proud to be an Electrician in a Power Plant.
I used to imagine that the Chief on the Chief rag boxes knew the history of all the pieces of rags in the box. When I moved to Texas in 2001, I used some sturdy Chief rag boxes when I was packing to leave. They are sturdy boxes. Just this past year, we threw away the last Chief rag box that contained Christmas decorations in exchange for plastic tubs. Even though it seems like a little thing. I miss seeing the Chief on those boxes of rags.
The chief on the Chief Rag Boxes
Resistance in a Coal-Fired Power Plant
Originally posted April 19, 2013:
Resistance is Futile! You may have heard that before. Especially if you are a Star Trek Fan. If not, then you know that there is always some form of resistance wherever you are.
Captain Picard as Locutus trying to convince you that “Resistance is Futile” Like that is ever going to happen
I learned a lot about resistance when I first joined the electric shop at the coal-fired power plant in North Central Oklahoma in 1984. I was assigned to work with Sonny Kendrick and Bill Rivers on the Precipitator during overhauls and when I wasn’t working on the manhole pumps and there wasn’t any other emergencies going on. Actually, from 1984 on, for the next 17 years I continued to work on the precipitator… (if I had only known my fate….).
Not only did I learn a lot about resistance, I also learned about capacitance, reactance, transformers, rectifiers, power supplies, diodes, transistors, op amps, and pots (also known as potentiometers). Bill Rivers was the brains of the outfit. Sonny was the Electric Specialist banished to the Precipitator by Leroy Godfrey (See Singing Along with Sonny Kendrick). Bill thought up the ideas and Sonny went to work to implement them. I just jumped in where I was needed.
The Precipitator is the large box between the boiler and the smokestack (maybe you can see this in the Power plant picture). The purpose of the electrostatic precipitator is to take the smoke (or fly ash) out of the exhaust before it went out of the smokestack.
The plant has a similar electrostatic precipitator, only ours is twice as long
The controls for the Precipitator were all electronic at that time. That meant that there were circuit boards full of resistors, capacitors, transistors, operational amplifiers, diodes and potentiometers. These circuit boards controlled the way the power was distributed throughout the precipitator wires and plates through high powered transformers, and how the rappers and vibrators operated that dropped the collected ash into the hoppers.
Bill had me take an electronics course at the Indian Meridian Vo-tech so I would know the basics. Then he taught me all the shortcuts. I had to be able to look at a resistor and tell right away what the value of resistance it was. Resistors are color-coded and you had to learn what each of the colors represented…
This for instance is a 339 ohm resistor with a 5% tolerance.
I was expected to know this by sight. Bill would test me. There was a mnemonic device that I was taught to remember what each color represented, but it is not appropriate to repeat it, so I won’t. It is enough to say that the colors go like this: Black, Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White (I will never forget this my entire life). These represent the numbers zero through 9. Here is a full explanation of how to read a resistor….. just in case you are curious, or you are such a boring person that you really need some material to bring up when you are at a party and don’t know what to say:
This is how the color codes work for resistors works
I found that having just the correct amount of resistance was very important. Too much or too less, and everything stops working.
Isn’t it that way with management also? If the management is too resistant to change, then things come to a halt. If they have too little resistance, they lose control of the situation. Depending on the circuit (or managerial decision) and what you are trying to do, it helps to have a manager that has a variable resistance to meet the needs of each situation. Resistance to change is always a balancing act.
During the first two years I was an electrician, the main control panels that controlled the operation of the precipitators were electronic. We spent a lot of time in the lab troubleshooting electric circuits looking for blown (or bad) parts that needed to be replaced. Then we would solder new components on the circuit boards and then put them back in operation. I learned how to be an electronics junky. I became addicted to fixing electronic circuit boards. It was like a game to me.
Later, the precipitator controls were changed to digital controls. That is, they were more like little computers controlling the precipitator. Instead of a bunch of circuit boards dumbly, but cleverly, doing their job, (how many commas can I use in one sentence?), little brains were added that made decisions and reacted to conditions in a much more dynamic way.
What was interesting was that one day Bill Rivers was describing how technology was going to be in the future. He said that some day, we will be able to sit in the lab and look on a computer and see what all the controls in the precipitator were doing (this was 1984). If something isn’t working right, we could just reach over, type a few keys on the computer and adjust the controls. Drink our sweet tea (a necessary staple in Oklahoma at the time), and then wait for the next crisis…. Then he would giggle at the look of disbelief on my face.
When he was telling me this, I was thinking in my head…. Well, that would be nice, but this sounds more like a pipe dream to me than reality. What does an older guy with six kids from a tool and die company in Columbia Missouri (where I grew up, by chance) know about the future of anything….. well…. anything…uh… new age…. If that is what you might call it… I found out you just don’t really know when you are sitting in front of a true “visionary” with tremendous insight.
Bill Rivers had this incredible knack for telling the future. In 1984 he was predicting computer controls in the control room where you ran the entire plant from a computer on a desk instead of using the “Big Board”.
I love this picture! It makes me feel at home! This was not our plant, but is a Power Plant control room
He said you would be able to call someone on a phone you kept in your pocket or your watch like Dick Tracey.
Dick Tracy in a control room of a power plant sending commands to the hopper nozzle booster pumps
I don’t know what journals Bill was reading or if he just dreamed all this stuff up in his head, or maybe he was a Star Trek Fan that believed that if you can dream it up you can do it. I do know that he picked up on subtle queues and made great inferences from them that seemed astronomically unlikely. However, I have to admit that he caught me off guard a number of times with predictions that definitely came true.
I will talk about this more in a future post, but for now I will say that we did upgrade the precipitator to where you could sit in the control room and monitor and adjust the precipitator controls (all 84 on each unit), and even each of the rappers (672 rappers) and vibrators (168 vibrators) on the roof of each precipitator. With one key on the computer I could send a plume of ash out of the smokestack that looked like the unit had just tripped, and a moment later, clean it up again. This meant that I could send smoke signals to the Osage Indian tribe 20 miles north up the Arkansas (pronounced “Are Kansas”) river, telling them that the Pow Wow would begin at sunset.
Today, I understand that the “Big Board” at the plant is just a large junction box and the plant is controlled almost (if not) completely by computers sitting on the desk. Before I left the plant in 2001, this was being transitioned slowly to computer controls. I have another story to tell some day about this, and how an operator named Jim Cave, a Power Plant Genius and true Power Plant Man of the highest integrity, was snubbed by upper management for speeding this technology along. — Another example of Power Plant Resistance….
But for now…. back to my electronic days… before I began re-programming the Eeprom chips in the precipitator controls….
An Eeprom Chip used in the precipitator controls which I had a very “personal” relationship with…
Bill Rivers confided with me one day that when the new Instrument and Controls department had been formed from the “Results” department that his dream had been to become a part of this team. It meant the world to him. It was where he believed he belonged. It was one of his major goals in life.
There used to be two electrical specialists in the Power Plant. Sonny Kendrick was not always the only one. The other specialist was chosen to go to the Instrument and Controls shop. Bill Rivers wanted to move there also. He definitely had the experience and the knowledge to be a superb instrument and controls person. But Bill had this one problem.
He loved to joke around. He loved to pull strings and push buttons. I have mentioned in a previous posts that Bill would play a new joke on Sonny Kendrick every single day. As I have unfortunately found out in my own life… this tends to make them…. well….. it tends to make enemies out of those who have a chip on their shoulder. Those people who naturally feel inadequate in their abilities or their position in life. To go one step further…. anyone who feels “unloved”….. these people definitely do not like being joked with. They seem to never forgive you. My greatest regret in life is joking around with these individuals.
So, when it came time to choose who would be a part of the new Instrument and Controls shop, Bill Rivers was turned down. It was explained to him that the reason he was not given the job was because he cut off the leads of a transistor when he replaced them. — I’m not kidding. Bill Rivers had the habit of cutting off the leads of each resistor, transistor, diode or capacitor that he replaced…. this is why Monty Adams turned down his request for joining the “elite” Instrument and Controls shop (as he told Bill to his face).
Someone had told the Instrument and Controls Supervisor Monty Adams that Bill Rivers cut the leads off of transistors and resistors when he replaced them so that you couldn’t test them to see if they were all right. Implying that he didn’t want you to know whether he had replaced the transistor or resistor by mistake.
Bill Rivers took several transistors, cut the leads off of each of them and handed them to me and asked me to test them to see if they were still good or if they were bad. I took out my voltmeter, set it to ohms, and proceeded to test them as Bill Rivers had taught me. I told him…. this transistor is good….. this one is bad….
You see…. there is no way to cut the leads off of a transistor in such a way to make it impossible to tell if a transistor is good or bad…. In reality…. you cut the leads off of a bad transistor so that the person working on the circuit board knows that this is a bad transistor and doesn’t use it again by accident. This was electronics 101.
When Bill told me this story, he literally had tears in his eyes. This was because being part of the Instrument and Controls team was part of his dream. The future of his family and the entire rest of his life was decided the day he was told that he was not going to be a part of a team that he believed was his true lot in life.
I remember his exact words as he sat there in the lab alone and told me this story. He said, “… and Monty didn’t know… He didn’t know that you cut the leads…. that is standard procedure….” In Bill’s giggly way, he was crying out loud as he told me this.
From that point on….I knew that the decisions Bill made in his life were driven by that one decision to exclude him from this team. Unlike many of us that could say to ourselves…. “That is their loss”…. Bill kept this pain in his heart each day…. Every decision from that day further was effected by this event.
I calculated it out one day that I spent 414 hours driving back and forth from Stillwater, Oklahoma to the plant and back each day with Bill Rivers (along with Yvonne Taylor and Rich Litzer and occasionally others that needed a ride), and over that time, I became very close to Bill, even to the point of tutoring his son in Algebra (see post: How Many Power Plant Men Can You Put in a 1982 Honda Civic?).
I say this because I know about the pain that inflicted Bill River by a rash decision based on the hearsay of someone that held a grudge. I know how his entire life was changed and how it ended for Bill Rivers as a power plant employee. I know that every decision by Bill after this date was made in response to this one decision. Anyone who experienced Bill after 1983 knows what I am talking about.
I realized that today my own decisions in life help spell out my future. How some little remark may be misinterpreted, or even properly so. I realize as I write this post that how I accept or reject these events in my life, determines the future of my family. After seeing how every event in Bill’s life after that day at the power company was determined by his experience was to his detriment, I am determined not to let the same thing happened to me…..
That is why I have taken on the philosophy in my life that no matter how my actions are misinterpreted, I am determined to remain true to myself. I know what I mean, and I mean what I say, and I say what I mean, and an Elephant is Faithful 100 %.
From Horton Hatches an Egg by Dr. Seuss
Comment from the Original Post:
From Power Plant Rags To Riches
Originally posted on March 9, 2013:
There is one item that all Oklahoma power plant men carry with them almost every day. Whether they are electricians working on a motor, a mechanic pulling a pump, or an operator making his rounds. All of them carry and use this one item. It is so important that, without it, it would be difficult for the maintenance shop to function properly.
This item of course is a rag from the Chief Wiping Cloth Rag Box:
Every Power Plant Man uses Chief Wiping Cloths on a daily basis
As an electrician, I used rags all the time. Whether I was working on a breaker, doing battery inspection, elevator maintenance or just looking for a clean place to sit my back side, I had to have a rag from the box of Chief Wiping Cloths. Chief Wiping Cloths come from the Oklahoma Waste & Wiping Rag Company in Oklahoma City.
When I was on the labor crew, I was dirty all the time. I was doing coal clean-up, digging ditches, pouring concrete, shoveling bottom ash and wading through fly ash. I had little reason to stay clean or to clean things. My life was full of dirt and grime. I was always dirty, so much so that when I went into the electric shop in 1983 and Bill Bennett was talking to Charles Foster about who should repair the Manhole pump motors, Bill told Charles, “Let Kevin do it. He enjoys getting dirty.”
I didn’t argue with Bill, because, well…. what was the point. But as an electrician, I not only had desired to have a cleaner job, but I also wished to fulfill Jerry Mitchell’s prophesy that “When I become as good as him, I will be able to remain clean even in the face of “Coal Dust and Fly Ash” (See the post A Power Plant Man Becomes an Unlikely Saint). The boxes of rags were my opportunity.
So, when I left to go on a job, I would always grab at least a couple of rags from the box and put them in my tool bucket and at least one hanging out of my back pocket. That way, if I needed to plop down on the ground to unwire a motor too low to sit on my bucket, I could sit on a rag on the coal dust covered ground instead. This helped my goal of remaining as clean as possible.
It’s funny that years later I should miss the boxes of rags that I used to use to do my job. There was more to it than just the rags I used to wipe my hands, battery posts, greasy bearings, breaker parts and my nose. You see, these rags were made from recycled clothes. Yes. They were sterilized for our use, but these were from recycled clothes.
Actually, the Oklahoma Waste and Wiping Rag Company, founded in 1940, was one of the largest purchasers of donated clothing in the country. That meant that many of the rags we used in the rag box were actually worn by someone. Sure, a lot of the rags came from defective clothing from factories, but some of the rags had been clothes actually worn by a person.
As odd as it may sound, while I was grabbing rags from the rag box, I was thinking (at times… it wasn’t like it was an obsession with me), that these rags may have been worn by someone for years before ending up covered with bearing grease by my hand and tossed into a proper Fire protection trash can.
Trash cans like this were used because they prevented oily rags from burning down the shop when they would spontaneously combust
So, anyway….. Thinking about how these rags were possibly once worn by people throughout the United States, I felt that some of the rags had a specific connection to some unknown person somewhere. So, I would actually go through the rag box looking for pieces of rags that I felt had been worn by someone before. You know (or maybe you don’t), rags that had an aura around them like someone had once had a “personal relationship” with them.
I would take these rags and I would “pseudo-dress up” in them. So, if it was a rag made out of a pair of pants, I would tuck it in my belt and I would carry it that way until I needed it. In a weird way (and I know… you are thinking a “really weird” way), I would feel connected to the person that had worn this piece of clothing in the past. I felt as if I was honoring their piece of cloth just one last time before I stained it with coal dust, fly ash, or snot, just one last time.
And in my even weirder way, I would sort of pray for that person, whoever they may be. I would even, kind of, thank them for the use of their old clothes (I know, I stretched the English Language in those last two sentences to meet my unusual need).
I have a picture in my mind of myself standing on the platform of the 6A Forced Draft Fan at Muskogee in the fall of 1984 (one year after becoming an electrician), dressing myself up in pieces of clothing from the rag box, all giddy because I had found enough pieces to make an entire outfit made of half male and half female clothing. Ben Davis, who was on overhaul at Muskogee with me from our plant is shaking his head in disbelief that he had to work with such a goof. Not exactly sure who he has been assigned to work with… — I actually felt sorry for Ben. I knew I was a normal person. The trouble was… I was the only person that knew it (For an explanation about where that phrase originated, see the post “Bobbin’ Along with Bob Kennedy“).
Ben Davis
Levity is healthy. And at times when stress is at its greatest, levity is a way back to sanity. Just today I was invited to a conference call to discuss something that I was working on, and when I was done, I stayed on the line even though I was no longer needed. As I listened, one person on the other end was remarking about how he enjoyed his team so much because they were able to crack up and reduce the stress by being humorous.
A friend of mine, and fellow teammate Don McClure who had invited me to the call was coming up with one “one-liner” after the other. They were “spot-on” and very funny (as he usually is — ok. He’s going to correct me on the “usually” part). But he said one thing that hit home with me. He said that he had been in the Hot-seat so long that he had to put on a pair of Asbestos underwear.
This, of course, made me immediately think of the asbestos gloves we used to wear in the electric shop before Asbestos had been formerly outlawed. We had an old pair of asbestos gloves from Osage Plant ( to find out more about the Osage Plant read about it in the post Pioneers Of Power Plant Fame Finally Find Peace).
Asbestos Gloves worn when putting hot bearings on a motor shaft (for instance)
Along with the rags in the rag box, when I used to put on the asbestos gloves I used to think of Howard Chumbley (who died on August 4, 1998 at the age of 70), at the age of 24 working at the Osage Plant, before his hair turned to gray and then to white, wearing these same gloves while he pulled a bearing off of a heater and slapped it onto a motor shaft.
Here Lies Howard Chumbley
It gave a special meaning to motor repair. Even though Howard retired from plant life in 1985, for years I could put on his old pair of asbestos gloves and feel like I was stepping into his young shoes. I would think… If only I could be a true “Power Plant Man” like Howard…. I love Howard with all my heart, and today, I have never met a better human being than him.
Note that in the picture of Howard’s gravestone it says that he was an EM3 in the Navy. This is an “Electrician’s Mate 3rd Class”. There is no way I was ever going to measure up to Howard. He was a hero to his country and a man of great integrity and humility. If I had saved up all the nice things I had done in my life and done them all on one day, I may have slightly resembled Howard on a regular day. Just like Jim Waller that I had discussed in my last post… Only Men of the greatest integrity measure up to be “True Power Plant Men”.
This made changing the bearings on a motor almost a sacred event to me. I don’t know if the other electricians felt what I felt, but there was something about placing those gloves on my hands that seemed to transform me for a moment into someone noble. I never mentioned it to them (which was odd, because I was usually in the habit of telling them every little crazy thought that entered my head).
I remember at break time one day Margie Belongia (who was a plant janitor at the time) telling me in 1981 when I was a summer help, that she wanted to go to hell because that was where all of her friends would be. I asked her at the time how she was so certain that being in hell guaranteed that she would be able to be with her friends, and she was taken aback by my question. “What do you mean? Why wouldn’t I be with my friend?” — I responded, “Suppose in hell you are alone. With no one but yourself.” I think I unnerved her by my response. She said that she had never considered that. She had counted on being with her friends. They had all decided that was the way it was going to be.
At any rate. I kept her thought in my mind. I hope every day that someday I will be able to walk up behind Howard Chumbley (not in hell of course, the other place) and just stand there and listen to him tell stories about when he worked at the old Osage Plant, and how he used to be up to his elbows in oil that contained PCBs and never thought twice about it. Or how he played a harmless joke on someone dear to him, and he would laugh….
Howard was my foreman for only about 5 months before he retired. I remember sitting in the electric shop office for a year and a half during lunch listening to him tell his stories. He would grin like Andy Griffith and laugh in such a genuine way that you knew that his heart was as pure as his manners.
Andy Griffith in this picture reminds me of Howard Chumbley
To this day I know that I have never been richer than I was when I was able to sit in the shop and listen to Howard Chumbley pass on his life experience to us. Even years later when I was able to slip on the pair of Asbestos Gloves worn by him years earlier I could feel that I was following in his footsteps. Just the thought of that would make me proud to be an Electrician in a Power Plant.
I used to imagine that the Chief on the Chief rag boxes knew the history of all the pieces of rags in the box. When I moved to Texas in 2001, I used some sturdy Chief rag boxes when I was packing to leave. They are sturdy boxes. Just this past year, we threw away the last Chief rag box that contained Christmas decorations in exchange for plastic tubs. Even though it seems like a little thing. I miss seeing the Chief on those boxes of rags.
The chief on the Chief Rag Boxes
Resistance in a Coal-Fired Power Plant
Originally posted April 19, 2013:
Resistance is Futile! You may have heard that before. Especially if you are a Star Trek Fan. If not, then you know that there is always some form of resistance wherever you are.
Captain Picard as Locutus trying to convince you that “Resistance is Futile” Like that is ever going to happen
I learned a lot about resistance when I first joined the electric shop at the coal-fired power plant in North Central Oklahoma in 1984. I was assigned to work with Sonny Kendrick and Bill Rivers on the Precipitator during overhauls and when I wasn’t working on the manhole pumps and there wasn’t any other emergencies going on. Actually, from 1984 on, on the Precipitator for the next 17 years I continued to work on the precipitator… (if I had only known my fate….).
Not only did I learn a lot about resistance, I also learned about capacitance, reactance, transformers, rectifiers, power supplies, diodes, transistors, op amps, and pots (also known as potentiometers). Bill Rivers was the brains of the outfit. Sonny was the Electric Specialist banished to the Precipitator by Leroy Godfrey (See Singing Along with Sonny Kendrick). Bill thought up the ideas and Sonny went to work to implement them. I just jumped in where I was needed.
The Precipitator is the large box between the boiler and the smokestack (maybe you can see this in the Power plant picture). The purpose of the electrostatic precipitator is to take the smoke (or fly ash) out of the exhaust before it went out of the smokestack.
The plant has a similar electrostatic precipitator, only ours is twice as long
The controls for the Precipitator were all electronic at that time. That meant that there were circuit boards full of resistors, capacitors, transistors, operational amplifiers, diodes and potentiometers. These circuit boards controlled the way the power was distributed throughout the precipitator wires and plates through high powered transformers, and how the rappers and vibrators operated that dropped the collected ash into the hoppers.
Bill had me take an electronics course at the Indian Meridian Vo-tech so I would know the basics. Then he taught me all the shortcuts. I had to be able to look at a resistor and tell right away what the value of resistance it was. Resistors are color-coded and you had to learn what each of the colors represented…
This for instance is a 339 ohm resistor with a 5% tolerance.
I was expected to know this by sight. Bill would test me. There was a mnemonic device that I was taught to remember what each color represented, but it is not appropriate to repeat it, so I won’t. It is enough to say that the colors go like this: Black, Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White (I will never forget this my entire life). These represent the numbers zero through 9. Here is a full explanation of how to read a resistor….. just in case you are curious, or you are such a boring person that you really need some material to bring up when you are at a party and don’t know what to say:
This is how the color codes work for resistors works
I found that having just the correct amount of resistance was very important. Too much or too less, and everything stops working.
Isn’t it that way with management also? If the management is too resistant to change, then things come to a halt. If they have too little resistance, they lose control of the situation. Depending on the circuit (or managerial decision) and what you are trying to do, it helps to have a manager that has a variable resistance to meet the needs of each situation. Resistance to change is always a balancing act.
During the first two years I was an electrician, the main control panels that controlled the operation of the precipitators were electronic. We spent a lot of time in the lab troubleshooting electric circuits looking for blown (or bad) parts that needed to be replaced. Then we would solder new components on the circuit boards and then put them back in operation. I learned how to be an electronics junky. I became addicted to fixing electronic circuit boards. It was like a game to me.
Later, the precipitator controls were changed to digital controls. That is, they were more like little computers controlling the precipitator. Instead of a bunch of circuit boards dumbly, but cleverly, doing their job, (how many commas can I use in one sentence?), little brains were added that made decisions and reacted to conditions in a much more dynamic way.
What was interesting was that one day Bill Rivers was describing how technology was going to be in the future. He said that some day, we will be able to sit in the lab and look on a computer and see what all the controls in the precipitator were doing (this was 1984). If something isn’t working right, we could just reach over, type a few keys on the computer and adjust the controls. Drink our sweet tea (a necessary staple in Oklahoma at the time), and then wait for the next crisis…. Then he would giggle at the look of disbelief on my face.
When he was telling me this, I was thinking in my head…. Well, that would be nice, but this sounds more like a pipe dream to me than reality. What does an older guy with six kids from a tool and die company in Columbia Missouri (where I grew up, by chance) know about the future of anything….. well…. anything…uh… new age…. If that is what you might call it… I found out you just don’t really know when you are sitting in front of a true “visionary” with tremendous insight.
Bill Rivers had this incredible knack for telling the future. In 1984 he was predicting computer controls in the control room where you ran the entire plant from a computer on a desk instead of using the “Big Board”.
I love this picture! It makes me feel at home! This was not our plant, but is a Power Plant control room
He said you would be able to call someone on a phone you kept in your pocket or your watch like Dick Tracey.
Dick Tracy in a control room of a power plant sending commands to the hopper nozzle booster pumps
I don’t know what journals Bill was reading or if he just dreamed all this stuff up in his head, or maybe he was a Star Trek Fan that believed that if you can dream it up you can do it. I do know that he picked up on subtle queues and made great inferences from them that seemed astronomically unlikely. However, I have to admit that he caught me off guard a number of times with predictions that definitely came true.
I will talk about this more in a future post, but for now I will say that we did upgrade the precipitator to where you could sit in the control room and monitor and adjust the precipitator controls (all 84 on each unit), and even each of the rappers (672 rappers) and vibrators (168 vibrators) on the roof of each precipitator. With one key on the computer I could send a plume of ash out of the smokestack that looked like the unit had just tripped, and a moment later, clean it up again. This meant that I could send smoke signals to the Osage Indian tribe 20 miles north up the Arkansas (pronounced “Are Kansas”) river, telling them that the Pow Wow would begin at sunset.
Today, I understand that the “Big Board” at the plant is just a large junction box and the plant is controlled almost (if not) completely by computers sitting on the desk. Before I left the plant in 2001, this was being transitioned slowly to computer controls. I have another story to tell some day about this, and how an operator named Jim Cave, a Power Plant Genius and true Power Plant Man of the highest integrity, was snubbed by upper management for speeding this technology along. — Another example of Power Plant Resistance….
But for now…. back to my electronic days… before I began re-programming the Eeprom chips in the precipitator controls….
An Eeprom Chip used in the precipitator controls which I had a very “personal” relationship with…
Bill Rivers confided with me one day that when the new Instrument and Controls department had been formed from the “Results” department that his dream had been to become a part of this team. It meant the world to him. It was where he believed he belonged. It was one of his major goals in life.
There used to be two electrical specialists in the Power Plant. Sonny Kendrick was not always the only one. The other specialist was chosen to go to the Instrument and Controls shop. Bill Rivers wanted to move there also. He definitely had the experience and the knowledge to be a superb instrument and controls person. But Bill had this one problem.
He loved to joke around. He loved to pull strings and push buttons. I have mentioned in a previous posts that Bill would play a new joke on Sonny Kendrick every single day. As I have unfortunately found out in my own life… this tends to make them…. well….. it tends to make enemies out of those who have a chip on their shoulder. Those people who naturally feel inadequate in their abilities or their position in life. To go one step further…. anyone who feels “unloved”….. these people definitely do not like being joked with. They seem to never forgive you. My greatest regret in life is joking around with these individuals.
So, when it came time to choose who would be a part of the new Instrument and Controls shop, Bill Rivers was turned down. It was explained to him that the reason he was not given the job was because he cut off the leads of a transistor when he replaced them. — I’m not kidding. Bill Rivers had the habit of cutting off the leads of each resistor, transistor, diode or capacitor that he replaced…. this is why Monty Adams turned down his request for joining the “elite” Instrument and Controls shop (as he told Bill to his face).
Someone had told the Instrument and Controls Supervisor Monty Adams that Bill Rivers cut the leads off of transistors and resistors when he replaced them so that you couldn’t test them to see if they were all right. Implying that he didn’t want you to know whether he had replaced the transistor or resistor by mistake.
Bill Rivers took several transistors, cut the leads off of each of them and handed them to me and asked me to test them to see if they were still good or if they were bad. I took out my voltmeter, set it to ohms, and proceeded to test them as Bill Rivers had taught me. I told him…. this transistor is good….. this one is bad….
You see…. there is no way to cut the leads off of a transistor in such a way to make it impossible to tell if a transistor is good or bad…. In reality…. you cut the leads off of a bad transistor so that the person working on the circuit board knows that this is a bad transistor and doesn’t use it again by accident. This was electronics 101.
When Bill told me this story, he literally had tears in his eyes. This was because being part of the Instrument and Controls team was part of his dream. His family and the entire rest of his life was decided the day he was told that he was not going to be a part of a team that he believed was his true lot in life.
I remember his exact words as he sat there in the lab alone and told me this story. He said, “… and Monty didn’t know… He didn’t know that you cut the leads…. that is standard procedure….” In Bill’s giggly way, he was crying out loud as he told me this.
From that point on….I knew that the decisions Bill made in his life were driven by that one decision to exclude him from this team. Unlike many of us that could say to ourselves…. “That is their loss”…. Bill kept this pain in his heart each day…. Every decision from that day further was effected by this event.
I calculated it out one day that I spent 414 hours driving back and forth from Stillwater, Oklahoma to the plant and back each day with Bill Rivers (along with Yvonne Taylor and Rich Litzer and occasionally others that needed a ride), and over that time, I became very close to Bill, even to the point of tutoring his son in Algebra (see post: How Many Power Plant Men Can You Put in a 1982 Honda Civic?).
I say this because I know about the pain that inflicted Bill River by a rash decision based on the hearsay of someone that held a grudge. I know how his entire life was changed and how it ended for Bill Rivers as a power plant employee. I know that every decision by Bill after this date was made in response to this one decision. Anyone who experienced Bill after 1983 knows what I am talking about.
I realized that today my own decisions in life help spell out my future. How some little remark may be misinterpreted, or even properly so. I realize as I write this post that how I accept or reject these events in my life, determines the future of my family. After seeing how every event in Bill’s life after that day at the power company was determined by his experience was to his detriment, I am determined not to let the same thing happened to me…..
That is why I have taken on the philosophy in my life that no matter how my actions are misinterpreted, I am determined to remain true to myself. I know what I mean, and I mean what I say, and I say what I mean, and an Elephant is Faithful 100 %.
From Horton Hatches an Egg by Dr. Seuss
Comment from the Original Post:
-
It’s amazing how many decisions are made based on incorrect / incomplete information (at all levels).
Resistance in a Coal-Fired Power Plant
Originally posted April 19, 2013:
Resistance is Futile! You may have heard that before. Especially if you are a Star Trek Fan. If not, then you know that there is always some form of resistance wherever you are.
Captain Picard as Locutus trying to convince you that “Resistance is Futile” Like that is ever going to happen
I learned a lot about resistance when I first joined the electric shop at the coal-fired power plant in North Central Oklahoma in 1984. I was assigned to work with Sonny Kendrick and Bill Rivers on the Precipitator during overhauls and when I wasn’t working on the manhole pumps and there wasn’t any other emergencies going on. Actually, from 1984 on, on, the Precipitator for the next 17 years I continued to work on the precipitator… (if I had only known my fate….).
Not only did I learn a lot about resistance, I also learned about capacitance, reactance, transformers, rectifiers, power supplies, diodes, transistors, op amps, and pots (also known as potentiometers). Bill Rivers was the brains of the outfit. Sonny was the Electric Specialist banished to the Precipitator by Leroy Godfrey (See Singing Along with Sonny Kendrick). Bill thought up the ideas and Sonny went to work to implement them. I just jumped in where I was needed.
The Precipitator is the large box between the boiler and the smokestack (maybe you can see this in the Power plant picture). The purpose of the electrostatic precipitator is to take the smoke (or fly ash) out of the exhaust before it went out of the smokestack. The controls for the Precipitator were all electronic at that time. That meant that there were circuit boards full of resistors, capacitors, transistors, operational amplifiers, diodes and potentiometers. These circuit boards controlled the way the power was distributed throughout the precipitator wires and plates through high powered transformers, and how the rappers and vibrators operated that dropped the collected ash into the hoppers.
Bill had me take an electronics course at the Indian Meridian Vo-tech so I would know the basics. Then he taught me all the shortcuts. I had to be able to look at a resistor and tell right away what the value of resistance it was. Resistors are color-coded and you had to learn what each of the colors represented…
This for instance is a 339 ohm resistor with a 5% tolerance.
I was expected to know this by sight. Bill would test me. There was a mnemonic device that I was taught to remember what each color represented, but it is not appropriate to repeat it, so I won’t. It is enough to say that the colors go like this: Black, Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White (I will never forget this my entire life). These represent the numbers zero through 9. Here is a full explanation of how to read a resistor….. just in case you are curious, or you are such a boring person that you really need some material to bring up when you are at a party and don’t know what to say:
This is how the color codes work for resistors works
I found that having just the correct amount of resistance was very important. Too much or too less, and everything stops working.
Isn’t it that way with management also? If the management is too resistant to change, then things come to a halt. If they have too little resistance, they lose control of the situation. Depending on the circuit (or managerial decision) and what you are trying to do, it helps to have a manager that has a variable resistance to meet the needs of each situation. Resistance to change is always a balancing act.
During the first two years I was an electrician, the main control panels that controlled the operation of the precipitators were electronic. We spent a lot of time in the lab troubleshooting electric circuits looking for blown (or bad) parts that needed to be replaced. Then we would solder new components on the circuit boards and then put them back in operation. I learned how to be an electronics junky. I became addicted to fixing electronic circuit boards. It was like a game to me.
Later, the precipitator controls were changed to digital controls. That is, they were more like little computers controlling the precipitator. Instead of a bunch of circuit boards dumbly, but cleverly, doing their job, (how many commas can I use in one sentence?), little brains were added that made decisions and reacted to conditions in a much more dynamic way.
What was interesting was that one day Bill Rivers was describing how technology was going to be in the future. He said that some day, we will be able to sit in the lab and look on a computer and see what all the controls in the precipitator were doing (this was 1984). If something isn’t working right, we could just reach over, type a few keys on the computer and adjust the controls. Drink our sweetened tea (a necessary staple in Oklahoma at the time), and then wait for the next crisis…. Then he would giggle at the look of disbelief on my face.
When he was telling me this, I was thinking in my head…. Well, that would be nice, but this sounds more like a pipe dream to me than reality. What does an older guy with six kids from a tool and die company in Columbia Missouri (where I grew up, by chance) know about the future of anything….. well…. anything…uh… new age…. If that is what you might call it… I found out you just don’t really know when you are sitting in front of a true “visionary” with tremendous insight.
Bill Rivers had this incredible knack for telling the future. In 1984 he was predicting computer controls in the control room where you ran the entire plant from a computer on a desk instead of using the “Big Board”.
I love this picture! It makes me feel at home! This was not our plant, but is a Power Plant control room
He said you would be able to call someone on a phone you kept in your pocket or your watch like Dick Tracey.
Dick Tracy in a control room of a power plant sending commands to the hopper nozzle booster pumps
I don’t know what journals Bill was reading or if he just dreamed all this stuff up in his head, or maybe he was a Star Trek Fan that believed that if you can dream it up you can do it. I do know that he picked up on subtle queues and made great inferences from them that seemed astronomically unlikely. However, I have to admit that he caught me off guard a number of times with predictions that definitely came true.
I will talk about this more in a future post, but for now I will say that we did upgrade the precipitator to where you could sit in the control room and monitor and adjust the precipitator controls (all 84 on each unit), and even each of the rappers (672 rappers) and vibrators (168 vibrators) on the roof of each precipitator. With one key on the computer I could send a plume of ash out of the smokestack that looked like the unit had just tripped, and a moment later, clean it up again. This meant that I could send smoke signals to the Osage Indian tribe 20 miles north up the Arkansas (pronounced “Are Kansas”) river, telling them that the Pow Wow would begin at sunset.
Today, I understand that the “Big Board” at the plant is just a large junction box and the plant is controlled almost (if not) completely by computers sitting on the desk. Before I left the plant in 2001, this was being transitioned slowly to computer controls. I have another story to tell some day about this, and how an operator named Jim Cave, a Power Plant Genius and true Power Plant Man of the highest integrity, was snubbed by upper management for speeding this technology along. — Another example of Power Plant Resistance….
But for now…. back to my electronic days… before I began re-programming the Eeprom chips in the precipitator controls….
An Eeprom Chip used in the precipitator controls which I had a very “personal” relationship with…
Bill Rivers confided with me one day that when the new Instrument and Controls department had been formed from the “Results” department that his dream had been to become a part of this team. It meant the world to him. It was where he believed he belonged. It was one of his major goals in life.
There used to be two electrical specialists in the Power Plant. Sonny Kendrick was not always the only one. The other specialist was chosen to go to the Instrument and Controls shop. Bill Rivers wanted to move there also. He definitely had the experience and the knowledge to be a superb instrument and controls person. But Bill had this one problem.
He loved to joke around. He loved to pull strings and push buttons. I have mentioned in a previous posts that Bill would play a new joke on Sonny Kendrick every single day. As I have unfortunately found out in my own life… this tends to make them…. well….. it tends to make enemies out of those who have a chip on their shoulder. Those people who naturally feel inadequate in their abilities or their position in life. To go one step further…. anyone who feels “unloved”….. these people definitely do not like being joked with. They seem to never forgive you. My greatest regret in life is joking around with these individuals.
So, when it came time to choose who would be a part of the new Instrument and Controls shop, Bill Rivers was turned down. It was explained to him that the reason he was not given the job was because he cut off the leads of a resistor when he replaced them. — I’m not kidding. Bill Rivers had the habit of cutting off the leads of each resistor, transistor, diode or capacitor that he replaced…. this is why Monty Adams turned down his request for joining the “elite” Instrument and Controls shop (as he told Bill to his face).
Someone had told the Instrument and Controls Supervisor Monty Adams that Bill Rivers cut the leads off of transistors and resistors when he replaced them so that you couldn’t test them to see if they were all right. Implying that he didn’t want you to know whether he had replaced the transistor or resistor by mistake.
Bill Rivers took several transistors, cut the leads off of each of them and handed them to me and asked me to test them to see if they was still good or if they were bad. I took out my voltmeter, set it to ohms, and proceeded to test them as Bill Rivers had taught me. I told him…. this transistor is good….. this one is bad….
You see…. there is no way to cut the leads off of a transistor in such a way to make it impossible to tell if a transistor is good or bad…. In reality…. you cut the leads off of a bad transistor so that the person working on the circuit board knows that this is a bad transistor and doesn’t use it again by accident. This was electronics 101.
When Bill told me this story, he literally had tears in his eyes. This was because being part of the Instrument and Controls team was part of his dream. His family and the entire rest of his life was decided the day he was told that he was not going to be a part of a team that he believed was his true lot in life.
I remember his exact words as he sat there in the lab alone and told me this story. He said, “… and Monty didn’t know… He didn’t know that you cut the leads…. that is standard procedure….” In Bill’s giggly way, he was crying out loud as he told me this.
From that point on….I knew that the decisions Bill made in his life were driven by that one decision to exclude him from this team. Unlike many of us that could say to ourselves…. “That is their loss”…. Bill kept this pain in his heart each day…. Every decision from that day further was effected by this event.
I calculated it out one day that I spent 414 hours driving back and forth from Stillwater, Oklahoma to the plant and back each day with Bill Rivers (along with Yvonne Taylor and Rich Litzer and occasionally others that needed a ride), and over that time, I became very close to Bill, even to the point of tutoring his son in Algebra (see post: How Many Power Plant Men Can You Put in a 1982 Honda Civic?).
I say this because I know about the pain that inflicted Bill River by a rash decision based on the hearsay of someone that held a grudge. I know how his entire life was changed and how it ended for Bill Rivers as a power plant employee. I know that every decision by Bill after this date was made in response to this one decision. Anyone who experienced Bill after 1983 knows what I am talking about.
I realized that today my own decisions in life help spell out my future. How some little remark may be misinterpreted, or even properly so. I realize as I write this post that how I accept or reject these events in my life, determines the future of my family. After seeing how every event in Bill’s life after that day at the power company was determined by his experience was to his detriment, I am determined not to let the same thing happened to me…..
That is why I have taken on the philosophy in my life that no matter how my actions are misinterpreted, I am determined to remain true to myself. I know what I mean, and I mean what I say, and I say what I mean, and an Elephant is Faithful 100 %.
From Horton Hatches an Egg by Dr. Seuss
Comment from the Original Post:
-
It’s amazing how many decisions are made based on incorrect / incomplete information (at all levels).
From Power Plant Rags To Riches
Originally posted on March 9, 2013:
There is one item that all Oklahoma power plant men carry with them almost every day. Whether they are electricians working on a motor, a mechanic pulling a pump, or an operator making his rounds. All of them carry and use this one item. It is so important that, without it, it would be difficult for the maintenance shop to function properly.
This item of course is a rag from the Chief Wiping Cloth Rag Box:
Every Power Plant Man uses Chief Wiping Cloths on a daily basis
As an electrician, I used rags all the time. Whether I was working on a breaker, doing battery inspection, elevator maintenance or just looking for a clean place to sit my back side, I had to have a rag from the box of Chief Wiping Cloths. Chief Wiping Cloths come from the Oklahoma Waste & Wiping Rag Company in Oklahoma City.
When I was on the labor crew, I was dirty all the time. I was doing coal clean-up, digging ditches, pouring concrete, shoveling bottom ash and wading through fly ash. I had little reason to stay clean or to clean things. My life was full of dirt and grime. I was always dirty, so much so that when I went into the electric shop in 1983 and Bill Bennett was talking to Charles Foster about who should repair the Manhole pump motors, Bill told Charles, “Let Kevin do it. He enjoys getting dirty.”
I didn’t argue with Bill, because, well…. what was the point. But as an electrician, I not only had desired to have a cleaner job, but I also wished to fulfill Jerry Mitchell’s prophesy that “When I become as good as him, I will be able to remain clean even in the face of “Coal Dust and Fly Ash” (See the post A Power Plant Man Becomes an Unlikely Saint). The boxes of rags were my opportunity.
So, when I left to go on a job, I would always grab at least a couple of rags from the box and put them in my tool bucket and at least one hanging out of my back pocket. That way, if I needed to plop down on the ground to unwire a motor too low to sit on my bucket, I could sit on a rag on the coal dust covered ground instead. This helped my goal of remaining as clean as possible.
It’s funny that years later I should miss the boxes of rags that I used to use to do my job. There was more to it than just the rags I used to wipe my hands, battery posts, greasy bearings, breaker parts and my nose. You see, these rags were made from recycled clothes. Yes. They were sterilized for our use, but these were from recycled clothes.
Actually, the Oklahoma Waste and Wiping Rag Company, founded in 1940, was one of the largest purchasers of donated clothing in the country. That meant that many of the rags we used in the rag box were actually worn by someone. Sure, a lot of the rags came from defective clothing from factories, but some of the rags had been clothes actually worn by a person.
As odd as it may sound, while I was grabbing rags from the rag box, I was thinking (at times… it wasn’t like it was an obsession with me), that these rags may have been worn by someone for years before ending up covered with bearing grease by my hand and tossed into a proper Fire protection trash can.
Trash cans like this were used because they prevented oily rags from burning down the shop when they would spontaneously combust
So, anyway….. Thinking about how these rags were possibly once worn by people throughout the United States, I felt that some of the rags had a specific connection to some unknown person somewhere. So, I would actually go through the rag box looking for pieces of rags that I felt had been worn by someone before. You know (or maybe you don’t), rags that had an aura around them like someone had once had a “personal relationship” with them.
I would take these rags and I would “pseudo-dress up” in them. So, if it was a rag made out of a pair of pants, I would tuck it in my belt and I would carry it that way until I needed it. In a weird way (and I know… you are thinking a “really weird” way), I would feel connected to the person that had worn this piece of clothing in the past. I felt as if I was honoring their piece of cloth just one last time before I stained it with coal dust, fly ash, or snot, just one last time.
And in my even weirder way, I would sort of pray for that person, whoever they may be. I would even, kind of, thank them for the use of their old clothes (I know, I stretched the English Language in those last two sentences to meet my unusual need).
I have a picture in my mind of myself standing on the platform of the 6A Forced Draft Fan at Muskogee in the fall of 1984 (one year after becoming an electrician), dressing myself up in pieces of clothing from the rag box, all giddy because I had found enough pieces to make an entire outfit made of half male and half female clothing. Ben Davis, who was on overhaul at Muskogee with me from our plant is shaking his head in disbelief that he had to work with such a goof. Not exactly sure who he has been assigned to work with… — I actually felt sorry for Ben. I knew I was a normal person. The trouble was… I was the only person that knew it.
Ben Davis
Levity is healthy. And at times when stress is at its greatest, levity is a way back to sanity. Just today I was invited to a conference call to discuss something that I was working on, and when I was done, I stayed on the line even though I was no longer needed. As I listened, one person on the other end was remarking about how he enjoyed his team so much because they were able to crack up and reduce the stress by being humorous.
A friend of mine, and fellow teammate Don McClure who had invited me to the call was coming up with one “one-liner” after the other. They were “spot-on” and very funny (as he usually is — ok. He’s going to correct me on the “usually” part). But he said one thing that hit home with me. He said that he had been in the Hot-seat so long that he had to put on a pair of Asbestos underwear.
This, of course, made me immediately think of the asbestos gloves we used to wear in the electric shop before Asbestos had been formerly outlawed. We had an old pair of asbestos gloves from Osage Plant ( to find out more about the Osage Plant read about it in the post Pioneers Of Power Plant Fame Finally Find Peace).
Asbestos Gloves worn when putting hot bearings on a motor shaft (for instance)
Along with the rags in the rag box, when I used to put on the asbestos gloves I used to think of Howard Chumbley (who died on August 4, 1998 at the age of 70), at the age of 24 working at the Osage Plant, before his hair turned to gray and then to white, wearing these same gloves while he pulled a bearing off of a heater and slapped it onto a motor shaft.
Here Lies Howard Chumbley
It gave a special meaning to motor repair. Even though Howard retired from plant life in 1985, for years I could put on his old pair of asbestos gloves and feel like I was stepping into his young shoes. I would think… If only I could be a true “Power Plant Man” like Howard…. I love Howard with all my heart, and today, I have never met a better human being than him.
Note that in the picture of Howard’s gravestone it says that he was an EM3 in the Navy. This is an “Electrician’s Mate 3rd Class”. There is no way I was ever going to measure up to Howard. He was a hero to his country and a man of great integrity and humility. If I had saved up all the nice things I had done in my life and done them all on one day, I may have slightly resembled Howard on a regular day. Just like Jim Waller that I had discussed in my last post… Only Men of the greatest integrity measure up to be “True Power Plant Men”.
This made changing the bearings on a motor almost a sacred event to me. I don’t know if the other electricians felt what I felt, but there was something about placing those gloves on my hands that seemed to transform me for a moment into someone noble. I never mentioned it to them (which was odd, because I was usually in the habit of telling them every little crazy thought that entered my head).
I remember at break time one day Margie Belongia (who was a plant janitor at the time) telling me in 1981 when I was a summer help, that she wanted to go to hell because that was where all of her friends would be. I asked her at the time how she was so certain that being in hell guaranteed that she would be able to be with her friends, and she was taken aback by my question. “What do you mean? Why wouldn’t I be with my friend?” — I responded, “Suppose in hell you are alone. With no one but yourself.” I think I unnerved her by my response. She said that she had never considered that. She had counted on being with her friends. They had all decided that was the way it was going to be.
At any rate. I kept her thought in my mind. I hope every day that someday I will be able to walk up behind Howard Chumbley (not in hell of course) and just stand there and listen to him tell stories about when he worked at the old Osage Plant, and how he used to be up to his elbows in oil that contained PCBs and never thought twice about it. Or how he played a harmless joke on someone dear to him, and he would laugh….
Howard was my foreman for only about 5 months before he retired. I remember sitting in the electric shop office for a year and a half during lunch listening to him tell his stories. He would grin like Andy Griffith and laugh in such a genuine way that you knew that his heart was as pure as his manners.
Andy Griffith in this picture reminds me of Howard Chumbley
To this day I know that I have never been richer than I was when I was able to sit in the shop and listen to Howard Chumbley pass on his life experience to us. Even years later when I was able to slip on the pair of Asbestos Gloves worn by him years earlier I could feel that I was following in his footsteps. Just the thought of that would make me proud to be an Electrician in a Power Plant.
I used to imagine that the Chief on the Chief rag boxes knew the history of all the pieces of rags in the box. When I moved to Texas in 2001, I used some sturdy Chief rag boxes when I was packing to leave. They are sturdy boxes. Just this past year, we threw away the last Chief rag box that contained Christmas decorations in exchange for plastic tubs. Even though it seems like a little thing. I miss seeing the Chief on those boxes of rags.
The chief on the Chief Rag Boxes
Resistance in a Coal-Fired Power Plant — Repost
Originally posted April 19, 2013:
Resistance is Futile! You may have heard that before. Especially if you are a Star Trek Fan. If not, then you know that there is always some form of resistance wherever you are.
Captain Picard as Locutus trying to convince you that “Resistance is Futile” Like that is ever going to happen
I learned a lot about resistance when I first joined the electric shop at the coal-fired power plant in North Central Oklahoma in 1984. I was assigned to work with Sonny Kendrick and Bill Rivers on the Precipitator during overhauls and when I wasn’t working on the manhole pumps and there wasn’t any other emergencies going on. Actually, from 1984 on, on, the Precipitator for the next 17 years I continued to work on the precipitator… (if I had only known my fate….).
Not only did I learn a lot about resistance, I also learned about capacitance, reactance, transformers, rectifiers, power supplies, diodes, transistors, op amps, and pots (also known as potentiometers). Bill Rivers was the brains of the outfit. Sonny was the Electric Specialist banished to the Precipitator by Leroy Godfrey (See Singing Along with Sonny Kendrick). Bill thought up the ideas and Sonny went to work to implement them. I just jumped in where I was needed.
The Precipitator is the large box between the boiler and the smokestack (maybe you can see this in the Power plant picture). The purpose of the electrostatic precipitator is to take the smoke (or fly ash) out of the exhaust before it went out of the smokestack. The controls for the Precipitator were all electronic at that time. That meant that there were circuit boards full of resistors, capacitors, transistors, operational amplifiers, diodes and potentiometers. These circuit boards controlled the way the power was distributed throughout the precipitator wires and plates through high powered transformers, and how the rappers and vibrators operated that dropped the collected ash into the hoppers.
Bill had me take an electronics course at the Indian Meridian Vo-tech so I would know the basics. Then he taught me all the shortcuts. I had to be able to look at a resistor and tell right away what the value of resistance it was. Resistors are color-coded and you had to learn what each of the colors represented…
This for instance is a 339 ohm resistor with a 5% tolerance.
I was expected to know this by sight. Bill would test me. There was a mnemonic device that I was taught to remember what each color represented, but it is not appropriate to repeat it, so I won’t. It is enough to say that the colors go like this: Black, Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White (I will never forget this my entire life). These represent the numbers zero through 9. Here is a full explanation of how to read a resistor….. just in case you are curious, or you are such a boring person that you really need some material to bring up when you are at a party and don’t know what to say:
This is how the color codes work for resistors works
I found that having just the correct amount of resistance was very important. Too much or too less, and everything stops working.
Isn’t it that way with management also? If the management is too resistant to change, then things come to a halt. If they have too little resistance, they lose control of the situation. Depending on the circuit (or managerial decision) and what you are trying to do, it helps to have a manager that has a variable resistance to meet the needs of each situation. Resistance to change is always a balancing act.
During the first two years I was an electrician, the main control panels that controlled the operation of the precipitators were electronic. We spent a lot of time in the lab troubleshooting electric circuits looking for blown (or bad) parts that needed to be replaced. Then we would solder new components on the circuit boards and then put them back in operation. I learned how to be an electronics junky. I became addicted to fixing electronic circuit boards. It was like a game to me.
Later, the precipitator controls were changed to digital controls. That is, they were more like little computers controlling the precipitator. Instead of a bunch of circuit boards dumbly, but cleverly, doing their job, (how many commas can I use in one sentence?), little brains were added that made decisions and reacted to conditions in a much more dynamic way.
What was interesting was that one day Bill Rivers was describing how technology was going to be in the future. He said that some day, we will be able to sit in the lab and look on a computer and see what all the controls in the precipitator were doing (this was 1984). If something isn’t working right, we could just reach over, type a few keys on the computer and adjust the controls. Drink our sweetened tea (a necessary staple in Oklahoma at the time), and then wait for the next crisis…. Then he would giggle at the look of disbelief on my face.
When he was telling me this, I was thinking in my head…. Well, that would be nice, but this sounds more like a pipe dream to me than reality. What does an older guy with six kids from a tool and die company in Columbia Missouri (where I grew up, by chance) know about the future of anything….. well…. anything…uh… new age…. If that is what you might call it… I found out you just don’t really know when you are sitting in front of a true “visionary” with tremendous insight.
Bill Rivers had this incredible knack for telling the future. In 1984 he was predicting computer controls in the control room where you ran the entire plant from a computer on a desk instead of using the “Big Board”.
I love this picture! It makes me feel at home! This was not our plant, but is a Power Plant control room
He said you would be able to call someone on a phone you kept in your pocket or your watch like Dick Tracey.
Dick Tracy in a control room of a power plant sending commands to the hopper nozzle booster pumps
I don’t know what journals Bill was reading or if he just dreamed all this stuff up in his head, or maybe he was a Star Trek Fan that believed that if you can dream it up you can do it. I do know that he picked up on subtle queues and made great inferences from them that seemed astronomically unlikely. However, I have to admit that he caught me off guard a number of times with predictions that definitely came true.
I will talk about this more in a future post, but for now I will say that we did upgrade the precipitator to where you could sit in the control room and monitor and adjust the precipitator controls (all 84 on each unit), and even each of the rappers (672 rappers) and vibrators (168 vibrators) on the roof of each precipitator. With one key on the computer I could send a plume of ash out of the smokestack that looked like the unit had just tripped, and a moment later, clean it up again. This meant that I could send smoke signals to the Osage Indian tribe 20 miles north up the Arkansas (pronounced “Are Kansas”) river, telling them that the Pow Wow would begin at sunset.
Today, I understand that the “Big Board” at the plant is just a large junction box and the plant is controlled almost (if not) completely by computers sitting on the desk. Before I left the plant in 2001, this was being transitioned slowly to computer controls. I have another story to tell some day about this, and how an operator named Jim Cave, a Power Plant Genius and true Power Plant Man of the highest integrity, was snubbed by upper management for speeding this technology along. — Another example of Power Plant Resistance….
But for now…. back to my electronic days… before I began re-programming the Eeprom chips in the precipitator controls….
An Eeprom Chip used in the precipitator controls which I had a very “personal” relationship with…
Bill Rivers confided with me one day that when the new Instrument and Controls department had been formed from the “Results” department that his dream had been to become a part of this team. It meant the world to him. It was where he believed he belonged. It was one of his major goals in life.
There used to be two electrical specialists in the Power Plant. Sonny Kendrick was not always the only one. The other specialist was chosen to go to the Instrument and Controls shop. Bill Rivers wanted to move there also. He definitely had the experience and the knowledge to be a superb instrument and controls person. But Bill had this one problem.
He loved to joke around. He loved to pull strings and push buttons. I have mentioned in a previous posts that Bill would play a new joke on Sonny Kendrick every single day. As I have unfortunately found out in my own life… this tends to make them…. well….. it tends to make enemies out of those who have a chip on their shoulder. Those people who naturally feel inadequate in their abilities or their position in life. To go one step further…. anyone who feels “unloved”….. these people definitely do not like being joked with. They seem to never forgive you. My greatest regret in life is joking around with these individuals.
So, when it came time to choose who would be a part of the new Instrument and Controls shop, Bill Rivers was turned down. It was explained to him that the reason he was not given the job was because he cut off the leads of a resistor when he replaced them. — I’m not kidding. Bill Rivers had the habit of cutting off the leads of each resistor, transistor, diode or capacitor that he replaced…. this is why Monty Adams turned down his request for joining the “elite” Instrument and Controls shop (as he told Bill to his face).
Someone had told the Instrument and Controls Supervisor Monty Adams that Bill Rivers cut the leads off of transistors and resistors when he replaced them so that you couldn’t test them to see if they were all right. Implying that he didn’t want you to know whether he had replaced the transistor or resistor by mistake.
Bill Rivers took several transistors, cut the leads off of each of them and handed them to me and asked me to test them to see if they was still good or if they were bad. I took out my voltmeter, set it to ohms, and proceeded to test them as Bill Rivers had taught me. I told him…. this transistor is good….. this one is bad….
You see…. there is no way to cut the leads off of a transistor in such a way to make it impossible to tell if a transistor is good or bad…. In reality…. you cut the leads off of a bad transistor so that the person working on the circuit board knows that this is a bad transistor and doesn’t use it again by accident. This was electronics 101.
When Bill told me this story, he literally had tears in his eyes. This was because being part of the Instrument and Controls team was part of his dream. His family and the entire rest of his life was decided the day he was told that he was not going to be a part of a team that he believed was his true lot in life.
I remember his exact words as he sat there in the lab alone and told me this story. He said, “… and Monty didn’t know… He didn’t know that you cut the leads…. that is standard procedure….” In Bill’s giggly way, he was crying out loud as he told me this.
From that point on….I knew that the decisions Bill made in his life were driven by that one decision to exclude him from this team. Unlike many of us that could say to ourselves…. “That is their loss”…. Bill kept this pain in his heart each day…. Every decision from that day further was effected by this event.
I calculated it out one day that I spent 414 hours driving back and forth from Stillwater, Oklahoma to the plant and back each day with Bill Rivers (along with Yvonne Taylor and Rich Litzer and occasionally others that needed a ride), and over that time, I became very close to Bill, even to the point of tutoring his son in Algebra (see post: How Many Power Plant Men Can You Put in a 1982 Honda Civic?).
I say this because I know about the pain that inflicted Bill River by a rash decision based on the hearsay of someone that held a grudge. I know how his entire life was changed and how it ended for Bill Rivers as a power plant employee. I know that every decision by Bill after this date was made in response to this one decision. Anyone who experienced Bill after 1983 knows what I am talking about.
I realized that today my own decisions in life help spell out my future. How some little remark may be misinterpreted, or even properly so. I realize as I write this post that how I accept or reject these events in my life, determines the future of my family. After seeing how every event in Bill’s life after that day at the power company was determined by his experience was to his detriment, I am determined not to let the same thing happened to me…..
That is why I have taken on the philosophy in my life that no matter how my actions are misinterpreted, I am determined to remain true to myself. I know what I mean, and I mean what I say, and I say what I mean, and an Elephant is Faithful 100 %.
From Horton Hatches an Egg by Dr. Seuss
Comment from the Original Post:
-
It’s amazing how many decisions are made based on incorrect / incomplete information (at all levels).
From Power Plant Rags To Riches — Repost
Originally posted on March 9, 2013:
There is one item that all Oklahoma power plant men carry with them almost every day. Whether they are electricians working on a motor, a mechanic pulling a pump, or an operator making his rounds. All of them carry and use this one item. It is so important that, without it, it would be difficult for the maintenance shop to function properly.
This item of course is a rag from the Chief Wiping Cloth Rag Box:
Every Power Plant Man uses Chief Wiping Cloths on a daily basis
As an electrician, I used rags all the time. Whether I was working on a breaker, doing battery inspection, elevator maintenance or just looking for a clean place to sit my back side, I had to have a rag from the box of Chief Wiping Cloths. Chief Wiping Cloths come from the Oklahoma Waste & Wiping Rag Company in Oklahoma City.
When I was on the labor crew, I dirty all the time. I was doing coal clean-up, digging ditches, pouring concrete, shoveling bottom ash and wading through fly ash. I had little reason to stay clean or to clean things. My life was full of dirt and grime. I was always dirty, so much so that when I went into the electric shop in 1983 and Bill Bennett was talking to Charles Foster about who should repair the Manhole pump motors, Bill told Charles, “Let Kevin do it. He enjoys getting dirty.”
I didn’t argue with Bill, because, well…. what was the point. But as an electrician, I not only had desired to have a cleaner job, but I also wished to fulfill Jerry Mitchell’s prophesy that “When I become as good as him, I will be able to remain clean even in the face of “Coal Dust and Fly Ash” (See the post A Power Plant Man Becomes an Unlikely Saint). The boxes of rags were my opportunity.
So, when I left to go on a job, I would always grab at least a couple of rags from the box and put them in my tool bucket and at least one hanging out of my back pocket. That way, if I needed to plop down on the ground to unwire a motor too low to sit on my bucket, I could sit on a rag on the coal dust covered ground instead. This helped my goal of remaining as clean as possible.
It’s funny that years later I should miss the boxes of rags that I used to use to do my job. There was more to it than just the rags I used to wipe my hands, battery posts, greasy bearings, breaker parts and my nose. You see, these rags were made from recycled clothes. Yes. They were sterilized for our use, but these were from recycled clothes.
Actually, the Oklahoma Waste and Wiping Rag Company, founded in 1940, was one of the largest purchasers of donated clothing in the country. That meant that many of the rags we used in the rag box were actually worn by someone. Sure, a lot of the rags came from defective clothing from factories, but some of the rags had been clothes actually worn by a person.
As odd as it may sound, while I was grabbing rags from the rag box, I was thinking (at times… it wasn’t like it was an obsession with me), that these rags may have been worn by someone for years before ending up covered with bearing grease by my hand and tossed into a proper Fire protection trash can.
Trash cans like this were used because they prevented oily rags from burning down the shop when they would spontaneously combust
So, anyway….. Thinking about how these rags were possibly once worn by people throughout the United States, I felt that some of the rags had a specific connection to some unknown person somewhere. So, I would actually go through the rag box looking for pieces of rags that I felt had been worn by someone before. You know (or maybe you don’t), rags that had an aura around them like someone had once had a “personal relationship” with them.
I would take these rags and I would “pseudo-dress up” in them. So, if it was a rag made out of a pair of pants, I would tuck it in my belt and I would carry it that way until I needed it. In a weird way (and I know… you are thinking a “really weird” way), I would feel connected to the person that had worn this piece of clothing in the past. I felt as if I was honoring their piece of cloth just one last time before I stained it with coal dust, fly ash, or snot, just one last time.
And in my even weirder way, I would sort of pray for that person, whoever they may be. I would even, kind of, thank them for the use of their old clothes (I know, I stretched the English Language in those last two sentences to meet my unusual need).
I have a picture in my mind of myself standing on the platform of the 6A Forced Draft Fan at Muskogee in the fall of 1984 (one year after becoming an electrician), dressing myself up in pieces of clothing from the rag box, all giddy because I had found enough pieces to make an entire outfit made of half male and half female clothing. Ben Davis, who was on overhaul at Muskogee with me from our plant is shaking his head in disbelief that he had to work with such a goof. Not exactly sure who he has been assigned to work with… — I actually felt sorry for Ben. I knew I was a normal person. The trouble was… I was the only person that knew it.
Levity is healthy. And at times when stress is at its greatest, levity is a way back to sanity. Just today I was invited to a conference call to discuss something that I was working on, and when I was done, I stayed on the line even though I was no longer needed. As I listened, one person on the other end was remarking about how he enjoyed his team so much because they were able to crack up and reduce the stress by being humorous.
A friend of mine, and fellow teammate Don McClure who had invited me to the call was coming up with one “one-liner” after the other. They were “spot-on” and very funny (as he usually is — ok. He’s going to correct me on the “usually” part). But he said one thing that hit home with me. He said that he had been in the Hot-seat so long that he had to put on a pair of Asbestos underwear.
This, of course, made me immediately think of the asbestos gloves we used to wear in the electric shop before Asbestos had been formerly outlawed. We had an old pair of asbestos gloves from Osage Plant ( to find out more about the Osage Plant read about it in the post Pioneers Of Power Plant Fame Finally Find Peace).
Asbestos Gloves worn when putting hot bearings on a motor shaft (for instance)
Along with the rags in the rag box, when I used to put on the asbestos gloves I used to think of Howard Chumbley (who died on August 4, 1998 at the age of 70), at the age of 24 working at the Osage Plant, before his hair turned to gray and then to white, wearing these same gloves while he pulled a bearing off of a heater and slapped it onto a motor shaft.
Here Lies Howard Chumbley
It gave a special meaning to motor repair. Even though Howard retired from plant life in 1985, for years I could put on his old pair of asbestos gloves and feel like I was stepping into his young shoes. I would think… If only I could be a true “Power Plant Man” like Howard…. I love Howard with all my heart, and today, I have never met a better human being than him.
Note that in the picture of Howard’s gravestone it says that he was an EM3 in the Navy. This is an “Electrician’s Mate 3rd Class”. There is no way I was ever going to measure up to Howard. He was a hero to his country and a man of great integrity and humility. If I had saved up all the nice things I had done in my life and done them all on one day, I may have slightly resembled Howard on a regular day. Just like Jim Waller that I had discussed in my last post… Only Men of the greatest integrity measure up to be “True Power Plant Men”.
This made changing the bearings on a motor almost a sacred event to me. I don’t know if the other electricians felt what I felt, but there was something about placing those gloves on my hands that seemed to transform me for a moment into someone noble. I never mentioned it to them (which was odd, because I was usually in the habit of telling them every little crazy thought that entered my head).
I remember at break time one day Margie Belongia (who was a plant janitor at the time) telling me in 1981 when I was a summer help, that she wanted to go to hell because that was where all of her friends would be. I asked her at the time how she was so certain that being in hell guaranteed that she would be able to be with her friends, and she was taken aback by my question. “What do you mean? Why wouldn’t I be with my friend?” — I responded, “Suppose in hell you are alone. With no one but yourself.” I think I unnerved her by my response. She said that she had never considered that. She had counted on being with her friends. They had all decided that was the way it was going to be.
At any rate. I kept her thought in my mind. I hope every day that someday I will be able to walk up behind Howard Chumbley (not in hell of course) and just stand there and listen to him tell stories about when he worked at the old Osage Plant, and how he used to be up to his elbows in oil that contained PCBs and never thought twice about it. Or how he played a harmless joke on someone dear to him, and he would laugh….
Howard was my foreman for only about 5 months before he retired. I remember sitting in the electric shop office for a year and a half during lunch listening to him tell his stories. He would grin like Andy Griffith and laugh in such a genuine way that you knew that his heart was as pure as his manners.
Andy Griffith in this picture reminds me of Howard Chumbley
To this day I know that I have never been richer than I was when I was able to sit in the shop and listen to Howard Chumbley pass on his life experience to us. Even years later when I was able to slip on the pair of Asbestos Gloves worn by him years earlier I could feel that I was following in his footsteps. Just the thought of that would make me proud to be an Electrician in a Power Plant.
I used to imagine that the Chief on the Chief rag boxes knew the history of all the pieces of rags in the box. When I moved to Texas in 2001, I used some sturdy Chief rag boxes when I was packing to leave. They are sturdy boxes. Just this past year, we threw away the last Chief rag box that contained Christmas decorations in exchange for plastic tubs. Even though it seems like a little thing. I miss seeing the Chief on those boxes of rags.
The chief on the Chief Rag Boxes
Resistance in a Coal-Fired Power Plant
Resistance is Futile! You may have heard that before. Especially if you are a Star Trek Fan. If not, then you know that there is always some form of resistance wherever you are.
Captain Picard as Locutus trying to convince you that “Resistance is Futile” Like that is ever going to happen
I learned a lot about resistance when I first joined the electric shop at the coal-fired power plant in North Central Oklahoma in 1984. I was assigned to work with Sonny Kendrick and Bill Rivers on the Precipitator during overhauls and when I wasn’t working on the manhole pumps and there wasn’t any other emergencies going on. Actually, from 1984 on, on, the Precipitator for the next 17 years I continued to work on the precipitator… (if I had only known my fate….).
Not only did I learn a lot about resistance, I also learned about capacitance, reactance, transformers, rectifiers, power supplies, diodes, transistors, op amps, and pots (also known as potentiometers). Bill Rivers was the brains of the outfit. Sonny was the Electric Specialist banished to the Precipitator by Leroy Godfrey (See Singing Along with Sonny Kendrick). Bill thought up the ideas and Sonny went to work to implement them. I just jumped in where I was needed.
The Precipitator is the large box between the boiler and the smokestack (maybe you can see this in the Power plant picture). The purpose of the electrostatic precipitator is to take the smoke (or fly ash) out of the exhaust before it went out of the smokestack. The controls for the Precipitator were all electronic at that time. That meant that there were circuit boards full of resistors, capacitors, transistors, operational amplifiers, diodes and potentiometers. These circuit boards controlled the way the power was distributed throughout the precipitator wires and plates through high powered transformers, and how the rappers and vibrators operated that dropped the collected ash into the hoppers.
Bill had me take an electronics course at the Indian Meridian Vo-tech so I would know the basics. Then he taught me all the shortcuts. I had to be able to look at a resistor and tell right away what the value of resistance it was. Resistors are color-coded and you had to learn what each of the colors represented…
This for instance is a 339 ohm resistor with a 5% tolerance.
I was expected to know this by sight. Bill would test me. There was a mnemonic device that I was taught to remember what each color represented, but it is not appropriate to repeat it, so I won’t. It is enough to say that the colors go like this: Black, Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White (I will never forget this my entire life). These represent the numbers zero through 9. Here is a full explanation of how to read a resistor….. just in case you are curious, or you are such a boring person that you really need some material to bring up when you are at a party and don’t know what to say:
This is how the color codes work for resistors works
I found that having just the correct amount of resistance was very important. Too much or too less, and everything stops working.
Isn’t it that way with management also? If the management is too resistant to change, then things come to a halt. If they have too little resistance, they lose control of the situation. Depending on the circuit (or managerial decision) and what you are trying to do, it helps to have a manager that has a variable resistance to meet the needs of each situation. Resistance to change is always a balancing act.
During the first two years I was an electrician, the main control panels that controlled the operation of the precipitators were electronic. We spent a lot of time in the lab troubleshooting electric circuits looking for blown (or bad) parts that needed to be replaced. Then we would solder new components on the circuit boards and then put them back in operation. I learned how to be an electronics junky. I became addicted to fixing electronic circuit boards. It was like a game to me.
Later, the precipitator controls were changed to digital controls. That is, they were more like little computers controlling the precipitator. Instead of a bunch of circuit boards dumbly, but cleverly, doing their job, (how many commas can I use in one sentence?), little brains were added that made decisions and reacted to conditions in a much more dynamic way.
What was interesting was that one day Bill Rivers was describing how technology was going to be in the future. He said that some day, we will be able to sit in the lab and look on a computer and see what all the controls in the precipitator were doing (this was 1984). If something isn’t working right, we could just reach over, type a few keys on the computer and adjust the controls. Drink our sweetened tea (a necessary staple in Oklahoma at the time), and then wait for the next crisis…. Then he would giggle at the look of disbelief on my face.
When he was telling me this, I was thinking in my head…. Well, that would be nice, but this sounds more like a pipe dream to me than reality. What does an older guy with six kids from a tool and die company in Columbia Missouri (where I grew up, by chance) know about the future of anything….. well…. anything…uh… new age…. If that is what you might call it… I found out you just don’t really know when you are sitting in front of a true “visionary” with tremendous insight.
Bill Rivers had this incredible knack for telling the future. In 1984 he was predicting computer controls in the control room where you ran the entire plant from a computer on a desk instead of using the “Big Board”.
I love this picture! It makes me feel at home! This was not our plant, but is a Power Plant control room
He said you would be able to call someone on a phone you kept in your pocket or your watch like Dick Tracey.
Dick Tracy in a control room of a power plant sending commands to the hopper nozzle booster pumps
I don’t know what journals Bill was reading or if he just dreamed all this stuff up in his head, or maybe he was a Star Trek Fan that believed that if you can dream it up you can do it. I do know that he picked up on subtle queues and made great inferences from them that seemed astronomically unlikely. However, I have to admit that he caught me off guard a number of times with predictions that definitely came true.
I will talk about this more in a future post, but for now I will say that we did upgrade the precipitator to where you could sit in the control room and monitor and adjust the precipitator controls (all 84 on each unit), and even each of the rappers (672 rappers) and vibrators (168 vibrators) on the roof of each precipitator. With one key on the computer I could send a plume of ash out of the smokestack that looked like the unit had just tripped, and a moment later, clean it up again. This meant that I could send smoke signals to the Osage Indian tribe 20 miles north up the Arkansas (pronounced “Are Kansas”) river, telling them that the Pow Wow would begin at sunset.
Today, I understand that the “Big Board” at the plant is just a large junction box and the plant is controlled almost (if not) completely by computers sitting on the desk. Before I left the plant in 2001, this was being transitioned slowly to computer controls. I have another story to tell some day about this, and how an operator named Jim Cave, a Power Plant Genius and true Power Plant Man of the highest integrity, was snubbed by upper management for speeding this technology along. — Another example of Power Plant Resistance….
But for now…. back to my electronic days… before I began re-programming the Eeprom chips in the precipitator controls….
An Eeprom Chip used in the precipitator controls which I had a very “personal” relationship with…
Bill Rivers confided with me one day that when the new Instrument and Controls department had been formed from the “Results” department that his dream had been to become a part of this team. It meant the world to him. It was where he believed he belonged. It was one of his major goals in life.
There used to be two electrical specialists in the Power Plant. Sonny Kendrick was not always the only one. The other specialist was chosen to go to the Instrument and Controls shop. Bill Rivers wanted to move there also. He definitely had the experience and the knowledge to be a superb instrument and controls person. But Bill had this one problem.
He loved to joke around. He loved to pull strings and push buttons. I have mentioned in a previous posts that Bill would play a new joke on Sonny Kendrick every single day. As I have unfortunately found out in my own life… this tends to make them…. well….. it tends to make enemies out of those who have a chip on their shoulder. Those people who naturally feel inadequate in their abilities or their position in life. To go one step further…. anyone who feels “unloved”….. these people definitely do not like being joked with. They seem to never forgive you. My greatest regret in life is joking around with these individuals.
So, when it came time to choose who would be a part of the new Instrument and Controls shop, Bill Rivers was turned down. It was explained to him that the reason he was not given the job was because he cut off the leads of a resistor when he replaced them. — I’m not kidding. Bill Rivers had the habit of cutting off the leads of each resistor, transistor, diode or capacitor that he replaced…. this is why Monty Adams turned down his request for joining the “elite” Instrument and Controls shop (as he told Bill to his face).
Someone had told the Instrument and Controls Supervisor Monty Adams that Bill Rivers cut the leads off of transistors and resistors when he replaced them so that you couldn’t test them to see if they were all right. Implying that he didn’t want you to know whether he had replaced the transistor or resistor by mistake.
Bill Rivers took several transistors, cut the leads off of each of them and handed them to me and asked me to test them to see if they was still good or if they were bad. I took out my voltmeter, set it to ohms, and proceeded to test them as Bill Rivers had taught me. I told him…. this transistor is good….. this one is bad….
You see…. there is no way to cut the leads off of a transistor in such a way to make it impossible to tell if a transistor is good or bad…. In reality…. you cut the leads off of a bad transistor so that the person working on the circuit board knows that this is a bad transistor and doesn’t use it again by accident. This was electronics 101.
When Bill told me this story, he literally had tears in his eyes. This was because being part of the Instrument and Controls team was part of his dream. His family and the entire rest of his life was decided the day he was told that he was not going to be a part of a team that he believed was his true lot in life.
I remember his exact words as he sat there in the lab alone and told me this story. He said, “… and Monty didn’t know… He didn’t know that you cut the leads…. that is standard procedure….” In Bill’s giggly way, he was crying out loud as he told me this.
From that point on….I knew that the decisions Bill made in his life were driven by that one decision to exclude him from this team. Unlike many of us that could say to ourselves…. “That is their loss”…. Bill kept this pain in his heart each day…. Every decision from that day further was effected by this event.
I calculated it out one day that I spent 414 hours driving back and forth from Stillwater, Oklahoma to the plant and back each day with Bill Rivers (along with Yvonne Taylor and Rich Litzer and occasionally others that needed a ride), and over that time, I became very close to Bill, even to the point of tutoring his son in Algebra (see post: How Many Power Plant Men Can You Put in a 1982 Honda Civic?).
I say this because I know about the pain that inflicted Bill River by a rash decision based on the hearsay of someone that held a grudge. I know how his entire life was changed and how it ended for Bill Rivers as a power plant employee. I know that every decision by Bill after this date was made in response to this one decision. Anyone who experienced Bill after 1983 knows what I am talking about.
I realized that today my own decisions in life help spell out my future. How some little remark may be misinterpreted, or even properly so. I realize as I write this post that how I accept or reject these events in my life, determines the future of my family. After seeing how every event in Bill’s life after that day at the power company was determined by his experience was to his detriment, I am determined not to let the same thing happened to me…..
That is why I have taken on the philosophy in my life that no matter how my actions are misinterpreted, I am determined to remain true to myself. I know what I mean, and I mean what I say, and I say what I mean, and an Elephant is Faithful 100 %.
From Horton Hatches an Egg by Dr. Seuss
From Power Plant Rags To Riches
There is one item that all Oklahoma power plant men carry with them almost every day. Whether they are electricians working on a motor, a mechanic pulling a pump, or an operator making his rounds. All of them carry and use this one item. It is so important that, without it, it would be difficult for the maintenance shop to function properly.
This item of course is a rag from the Chief Wiping Cloth Rag Box:
Every Power Plant Man uses Chief Wiping Cloths on a daily basis
As an electrician, I used rags all the time. Whether I was working on a breaker, doing battery inspection, elevator maintenance or just looking for a clean place to sit my back side, I had to have a rag from the box of Chief Wiping Cloths. Chief Wiping Cloths come from the Oklahoma Waste & Wiping Rag Company in Oklahoma City.
When I was on the labor crew, I dirty all the time. I was doing coal clean-up, digging ditches, pouring concrete, shoveling bottom ash and wading through fly ash. I had little reason to stay clean or to clean things. My life was full of dirt and grime. I was always dirty, so much so that when I went into the electric shop in 1983 and Bill Bennett was talking to Charles Foster about who should repair the Manhole pump motors, Bill told Charles, “Let Kevin do it. He enjoys getting dirty.”
I didn’t argue with Bill, because, well…. what was the point. But as an electrician, I not only had desired to have a cleaner job, but I also wished to fulfill Jerry Mitchell’s prophesy that “When I become as good as him, I will be able to remain clean even in the face of “Coal Dust and Fly Ash” (See the post A Power Plant Man Becomes an Unlikely Saint). The boxes of rags were my opportunity.
So, when I left to go on a job, I would always grab at least a couple of rags from the box and put them in my tool bucket and at least one hanging out of my back pocket. That way, if I needed to plop down on the ground to unwire a motor too low to sit on my bucket, I could sit on a rag on the coal dust covered ground instead. This helped my goal of remaining as clean as possible.
It’s funny that years later I should miss the boxes of rags that I used to use to do my job. There was more to it than just the rags I used to wipe my hands, battery posts, greasy bearings, breaker parts and my nose. You see, these rags were made from recycled clothes. Yes. They were sterilized for our use, but these were from recycled clothes.
Actually, the Oklahoma Waste and Wiping Rag Company, founded in 1940, was one of the largest purchasers of donated clothing in the country. That meant that many of the rags we used in the rag box were actually worn by someone. Sure, a lot of the rags came from defective clothing from factories, but some of the rags had been clothes actually worn by a person.
As odd as it may sound, while I was grabbing rags from the rag box, I was thinking (at times… it wasn’t like it was an obsession with me), that these rags may have been worn by someone for years before ending up covered with bearing grease by my hand and tossed into a proper Fire protection trash can.
Trash cans like this were used because they prevented oily rags from burning down the shop when they would spontaneously combust
So, anyway….. Thinking about how these rags were possibly once worn by people throughout the United States, I felt that some of the rags had a specific connection to some unknown person somewhere. So, I would actually go through the rag box looking for pieces of rags that I felt had been worn by someone before. You know (or maybe you don’t), rags that had an aura around them like someone had once had a “personal relationship” with them.
I would take these rags and I would “pseudo-dress up” in them. So, if it was a rag made out of a pair of pants, I would tuck it in my belt and I would carry it that way until I needed it. In a weird way (and I know… you are thinking a “really weird” way), I would feel connected to the person that had worn this piece of clothing in the past. I felt as if I was honoring their piece of cloth just one last time before I stained it with coal dust, fly ash, or snot, just one last time.
And in my even weirder way, I would sort of pray for that person, whoever they may be. I would even, kind of, thank them for the use of their old clothes (I know, I stretched the English Language in those last two sentences to meet my unusual need).
I have a picture in my mind of myself standing on the platform of the 6A Forced Draft Fan at Muskogee in the fall of 1984 (one year after becoming an electrician), dressing myself up in pieces of clothing from the rag box, all giddy because I had found enough pieces to make an entire outfit made of half male and half female clothing. Ben Davis, who was on overhaul at Muskogee with me from our plant is shaking his head in disbelief that he had to work with such a goof. Not exactly sure who he has been assigned to work with… — I actually felt sorry for Ben. I knew I was a normal person. The trouble was… I was the only person that knew it.
Levity is healthy. And at times when stress is at its greatest, levity is a way back to sanity. Just today I was invited to a conference call to discuss something that I was working on, and when I was done, I stayed on the line even though I was no longer needed. As I listened, one person on the other end was remarking about how he enjoyed his team so much because they were able to crack up and reduce the stress by being humorous.
A friend of mine, and fellow teammate Don McClure who had invited me to the call was coming up with one “one-liner” after the other. They were “spot-on” and very funny (as he usually is — ok. He’s going to correct me on the “usually” part). But he said one thing that hit home with me. He said that he had been in the Hot-seat so long that he had to put on a pair of Asbestos underwear.
This, of course, made me immediately think of the asbestos gloves we used to wear in the electric shop before Asbestos had been formerly outlawed. We had an old pair of asbestos gloves from Osage Plant ( to find out more about the Osage Plant read about it in the post Pioneers Of Power Plant Fame Finally Find Peace).
Asbestos Gloves worn when putting hot bearings on a motor shaft (for instance)
Along with the rags in the rag box, when I used to put on the asbestos gloves I used to think of Howard Chumbley (who died on August 4, 1998 at the age of 70), at the age of 24 working at the Osage Plant, before his hair turned to gray and then to white, wearing these same gloves while he pulled a bearing off of a heater and slapped it onto a motor shaft.
Here Lies Howard Chumbley
It gave a special meaning to motor repair. Even though Howard retired from plant life in 1985, for years I could put on his old pair of asbestos gloves and feel like I was stepping into his young shoes. I would think… If only I could be a true “Power Plant Man” like Howard…. I love Howard with all my heart, and today, I have never met a better human being than him.
Note that in the picture of Howard’s gravestone it says that he was an EM3 in the Navy. This is an “Electrician’s Mate 3rd Class”. There is no way I was ever going to measure up to Howard. He was a hero to his country and a man of great integrity and humility. If I had saved up all the nice things I had done in my life and done them all on one day, I may have slightly resembled Howard on a regular day. Just like Jim Waller that I had discussed in my last post… Only Men of the greatest integrity measure up to be “True Power Plant Men”.
This made changing the bearings on a motor almost a sacred event to me. I don’t know if the other electricians felt what I felt, but there was something about placing those gloves on my hands that seemed to transform me for a moment into someone noble. I never mentioned it to them (which was odd, because I was usually in the habit of telling them every little crazy thought that entered my head).
I remember at break time one day Margie Belongia (who was a plant janitor at the time) telling me in 1981 when I was a summer help, that she wanted to go to hell because that was where all of her friends would be. I asked her at the time how she was so certain that being in hell guaranteed that she would be able to be with her friends, and she was taken aback by my question. “What do you mean? Why wouldn’t I be with my friend?” — I responded, “Suppose in hell you are alone. With no one but yourself.” I think I unnerved her by my response. She said that she had never considered that. She had counted on being with her friends. They had all decided that was the way it was going to be.
At any rate. I kept her thought in my mind. I hope every day that someday I will be able to walk up behind Howard Chumbley (not in hell of course) and just stand there and listen to him tell stories about when he worked at the old Osage Plant, and how he used to be up to his elbows in oil that contained PCBs and never thought twice about it. Or how he played a harmless joke on someone dear to him, and he would laugh….
Howard was my foreman for only about 5 months before he retired. I remember sitting in the electric shop office for a year and a half during lunch listening to him tell his stories. He would grin like Andy Griffith and laugh in such a genuine way that you knew that his heart was as pure as his manners.
Andy Griffith in this picture reminds me of Howard Chumbley
To this day I know that I have never been richer than I was when I was able to sit in the shop and listen to Howard Chumbley pass on his life experience to us. Even years later when I was able to slip on the pair of Asbestos Gloves worn by him years earlier I could feel that I was following in his footsteps. Just the thought of that would make me proud to be an Electrician in a Power Plant.
I used to imagine that the Chief on the Chief rag boxes knew the history of all the pieces of rags in the box. When I moved to Texas in 2001, I used some sturdy Chief rag boxes when I was packing to leave. They are sturdy boxes. Just this past year, we threw away the last Chief rag box that contained Christmas decorations in exchange for plastic tubs. Even though it seems like a little thing. I miss seeing the Chief on those boxes of rags.
The chief on the Chief Rag Boxes
Power Plant Men 
It’s amazing how many decisions are made based on incorrect / incomplete information (at all levels).