Psychological Profile of a Power Plant Control Room Operator
Favorites Post #38
Originally posted on July 6, 2012:
I suppose that many parents while raising their children would hear them say, “Dad, can you read that story to us again about the pirates that go to the island to find the treasure but Jim Hawkins fights them single-handed?” Or their children might say to their mother, “Will you tell us the story again about how you met daddy?” In my household, my children would say, “Dad, tell us another story about how you played a joke on Gene Day when you were working at the Coal-Fired Power Plant in Oklahoma? Those are always the best!”
As I pointed out in my third post this year called “Power Plant Humor And Joking With Gene Day” the first time I met Gene Day, I could tell that he was the type of person that would take a joke well, or so I thought…. One of the favorite stories my daughter would like for me to tell her as she was growing up was the one where I had created a Psychological Profile of Gene Day, who at that time was an Auxiliary Operator.
It began one day when I was leaving the electric shop through the Turbine Generator (T-G) building ground floor. A very noisy location as large steam pipes wound around under the Turbines where the steam caused a rumbling or whining sound. It was normal when walking through this area to reach up to the ear plugs that were draped over your shoulders and put them in your ears because the decibels were dangerously high if you were exposed earplug-less too long.
Earplugs on a cord that can be draped over your shoulders when not in use.
I stepped from the landing leading from the electric shop and started toward number 1 boiler when I spied Gene Day making his way around the first floor of the T-G building inspecting equipment and marking his documents indicating that they were operating correctly. As I saw him turn toward my direction I quickly dodged behind the nearest metal pillar (I-Beam). I peaked my head out from behind the pillar and took out the notepad that was in my back pocket, and the pen from my vest pocket pocket protector.
A pocket protector is a must for electricians and computer nerds who need a place to keep their small tools.
Gene saw me and gave me a suspicious look as I began feverishly writing in my notepad while looking from my notepad back to Gene and then back to what I was writing. After I had done this for about 10 seconds or so, I put my pad away, my pen back in the pocket protector and strolled away toward unit 1 to continue my work.
A notepad like this
It happened that this particular week was Gene’s week to monitor the equipment in the T-G building, so throughout the week he would be making his way somewhere around the T-G building with his clipboard in hand. Each time I encountered him I would do the same thing. I would visibly hide behind a beam and write notes in my notepad. I saw Gene rather frequently during the week because the majority of the time, I left the electric shop by going through the T-G room to one of the boilers and then to the precipitators, where I spent most of my time working at this time in my career (but that is another story for a later time).
Each time, Gene would watch me suspiciously knowing that I was just messing with him, but not exactly sure what I was “up to”. At the time, I wasn’t sure either. So I just wrote down what I saw Gene doing, that way, if he ran over and grabbed my notepad from me, it wouldn’t say anything other than what I saw.
It had happened at the plant a few years earlier when I was a janitor that the company had hired an efficiency expert to monitor the employees at the plant. He would walk around the plant with a stopwatch observing the employees. When he saw them he would write notes on his clipboard. It became very unnerving because you would walk around the corner and there he would be standing writing something down about you.
I went to the Assistant Plant Manager Bill Moler and told him that this creepy guy keeps showing up in the main switchgear by the janitors closet. And every time he sees me, he writes something down. I told Bill that it really bothered me. He explained that he is an efficiency expert and he has a certain path that he takes throughout the day and takes a snapshot of what the workers are doing at that moment and writes it down. By doing that he calculates how efficient we are. It seemed pretty silly to me, because most mechanics when they saw him coming put their tools down and did nothing while he walked by until he was out of sight again.
When I was on the labor crew a few weeks later, and I was blowing coal dust off of all the I-Beams above the bowl mills with a high pressure air hose, I looked down, and through my fogged up goggles I could see this guy standing directly under me. I was about 50 feet above him crawling across an I-Beam with the air hose blowing black dust everywhere. He had crossed my barrier tape to go into the bowl mill area to see how efficient I was being.
This is the type of barrier tape I was using. It is made of woven plastic fibers.
I was so mad I turned off my air hose, climbed down the wall Spiderman-like (no. not head first) and went straight into the A-Foreman’s office and told Marlin McDaniel that the Efficiency Expert had crossed my barrier tape and was standing directly under me as I was blowing down the beams with air.
It turned out that the Efficiency Expert had gone upstairs to complain that some guy in the bowl mill had dumped a bunch of coal dust on him while he was monitoring him from below. Evidently, he wasn’t expert enough to know you weren’t supposed to cross someone’s barrier tape without permission, as was indicated on the caution tags that were tied to the barrier tape. From that point on, the efficiency expert (now in lowercase) had to be accompanied by someone from the plant to make sure he wasn’t breaking any safety rules and putting himself at harm.
To make a long side story short, we turned out to be so efficient, people came from all over the world to study us. Somebody downtown hired the efficiency expert full time, but later he was laid off during the first downsizing.
He reminds me of a person on an episode of Star Trek The Next Generation where this guy Lieutenant Commander Remmick comes aboard the Enterprise and he walks around inspecting everything and asking everyone questions that make them uncomfortable and at the end asks Picard if he could come work on the Enterprise. He looked so much like him, that I thought maybe our efficiency expert went to Hollywood to become an actor.
Lieutenant Commander Remmick
Back to Gene Day. I suppose the thought of the efficiency expert may have been going through my mind as I was taking notes about Gene Day at work. Like I said, at the time, I didn’t know what I was going to do with it.
Oh. Let me include a picture of Gene Day:
Gene Day is the one standing on the right with the Orange shirt.
It finally came to me on Thursday morning. This was the last day that Gene was going to be on the day shift, so I figured I might as well do something about it. So when I entered the shop that morning, I sat down at the desk of my foreman Andy Tubbs and began to write. The title at the top of the page was: “The Psychological Profile of Gene Day”.
Using the notes I had taken during the week, I wrote things like the following: “Gene Day walks around the Turbine Generator building with a clipboard in his hand trying desperately to look like he’s doing something important. He constantly hopes that someone is watching him because he dislikes doing so much work to act busy for no reason.
At times Gene Day gets paranoid and believes that he sees people spying on him from behind every corner (especially I-Beams). Sometimes Gene Day stands in the middle of the T-G floor staring up into space as if he forgot what he was supposed to be doing.” I wrote more similar observations, but I don’t remember everything… but I do remember the last two sentences. I will save that for a couple of paragraphs from now.
I took my Psychological Profile of Gene Day and went up to the Control Room. I noticed out of the corner of my eye that Gene had just walked over toward the break room behind the Auxiliary Control Panel so I walked over by the Shift Supervisor’s office and I leaned against the top of the large Blue Monitor and placed the Psychological Profile on the top of the monitor in front of me.
Less than a minute later Gene came walking around behind me and seeing the paper on the top of the monitor came up behind me and looked over my shoulder and began to read….. He wasn’t trying to hide the fact that he was reading the paper, and I obviously knew he was there, and the title in large bold letters did say, “The Psychological Profile of Gene Day”. So, he read on.
I heard a few chuckles as he read through my interpretation of what he had done during the week. Then he came to the “Second from the Last Sentence”, as I could hear him reading quietly in my ear… The sentence read, “Gene Day sneaks up behind people and reads their private material over their shoulder!” — Bingo! I had him!
When he read that he grabbed me by the throat and started to Throttle me! Shaking me back and forth. This would have been a humdinger of a joke at that point, but I had one more sentence up my sleeve… ur… I mean on the paper….
As I was wavering (is that a word?) back and forth between life and death I managed to eke out something like: “Wait! There’s More!”…. Gene Day let up on me a little and looked down at the page and read the last sentence…… It read….. “Gene Day tries to strangle people who are only trying to help him by creating his Psychological Profile.”
That was all it took. Another perfect joke played on Gene Day, and I was able to live to tell about it. When Gene read that he was stunned into dismay. Giggling as hard as he could he retreated shaking his head in defeat.
Now, I know that Gene reads these posts, and he may remember this story a little differently, and I’ll give him that because Gene is older than dirt and his memory isn’t that good. But I was the one that was being strangled, and I still have a vivid image of those few moments. Not only do I, but so do my children, who will one day tell their children, who will say, “Mommy, will you tell us that story again about how Grandpa was strangled by Gene Day that time in the Control Room at the Coal-Fired Power Plant in Oklahoma?”
Psychological Profile of a Power Plant Control Room Operator
Originally posted on July 6, 2012:
I suppose that many parents while raising their children would hear them say, “Dad, can you read that story to us again about the pirates that go to the island to find the treasure but Jim Hawkins fights them single-handed?” Or their children might say to their mother, “Will you tell us the story again about how you met daddy?” In my household, my children would say, “Dad, tell us another story about how you played a joke on Gene Day when you were working at the Coal-Fired Power Plant in Oklahoma? Those are always the best!”
As I pointed out in my third post this year called “Power Plant Humor And Joking With Gene Day” the first time I met Gene Day, I could tell that he was the type of person that would take a joke well, or so I thought…. One of the favorite stories my daughter would like for me to tell her as she was growing up was the one where I had created a Psychological Profile of Gene Day, who at that time was an Auxiliary Operator.
It began one day when I was leaving the electric shop through the Turbine Generator (T-G) building ground floor. A very noisy location as large steam pipes wound around under the Turbines where the steam caused a rumbling or whining sound. It was normal when walking through this area to reach up to the ear plugs that were draped over your shoulders and put them in your ears because the decibels were dangerously high if you were exposed earplugless too long.
Earplugs on a cord that can be draped over your shoulders when not in use.
I stepped from the landing leading from the electric shop and started toward number 1 boiler when I spied Gene Day making his way around the first floor of the T-G building inspecting equipment and marking his documents indicating that they were operating correctly. As I saw him turn toward my direction I quickly dodged behind the nearest metal pillar (I-Beam). I peaked my head out from behind the pillar and took out the notepad that was in my back pocket, and the pen from my vest pocket pocket protector.
A pocket protector is a must for electricians and computer nerds who need a place to keep their small tools.
Gene saw me and gave me a suspicious look as I began feverishly writing in my notepad while looking from my notepad back to Gene and then back to what I was writing. After I had done this for about 10 seconds or so, I put my pad away, my pen back in the pocket protector and strolled away toward unit 1 to continue my work.
A notepad like this
It happened that this particular week was Gene’s week to monitor the equipment in the T-G building, so throughout the week he would be making his way somewhere around the T-G building with his clipboard in hand. Each time I encountered him I would do the same thing. I would visibly hide behind a beam and write notes in my notepad. I saw Gene rather frequently during the week because the majority of the time, I left the electric shop by going through the T-G room to one of the boilers and then to the precipitators, where I spent most of my time working at this time in my career (but that is another story for a later time).
Each time, Gene would watch me suspiciously knowing that I was just messing with him, but not exactly sure what I was “up to”. At the time, I wasn’t sure either. So I just wrote down what I saw Gene doing, that way, if he ran over and grabbed my notepad from me, it wouldn’t say anything other than what I saw.
It had happened at the plant a few years earlier when I was a janitor that the company had hired an efficiency expert to monitor the employees at the plant. He would walk around the plant with a stopwatch observing the employees. When he saw them he would write notes on his clipboard. It became very unnerving because you would walk around the corner and there he would be standing writing something down about you.
I went to the Assistant Plant Manager Bill Moler and told him that this creepy guy keeps showing up in the main switchgear by the janitors closet. And every time he sees me, he writes something down. I told Bill that it really bothered me. He explained that he is an efficiency expert and he has a certain path that he takes throughout the day and takes a snapshot of what the workers are doing at that moment and writes it down. By doing that he calculates how efficient we are. It seemed pretty silly to me, because most mechanics when they saw him coming put their tools down and did nothing while he walked by until he was out of sight again.
When I was on the labor crew a few weeks later, and I was blowing coal dust off of all the I-Beams above the bowl mills with a high pressure air hose, I looked down, and through my fogged up goggles I could see this guy standing directly under me. I was about 50 feet above him crawling across an I-Beam with the air hose blowing black dust everywhere. He had crossed my barrier tape to go into the bowl mill area to see how efficient I was being.
This is the type of barrier tape I was using. It is made of woven plastic fibers.
I was so mad I turned off my air hose, climbed down the wall Spiderman-like (no. not head first) and went straight into the A-Foreman’s office and told Marlin McDaniel that the Efficiency Expert had crossed my barrier tape and was standing directly under me as I was blowing down the beams with air.
It turned out that the Efficiency Expert had gone upstairs to complain that some guy in the bowl mill had dumped a bunch of coal dust on him while he was monitoring him from below. Evidently, he wasn’t expert enough to know you weren’t supposed to cross someone’s barrier tape without permission, as was indicated on the caution tags that were tied to the barrier tape. From that point on, the efficiency expert (now in lowercase) had to be accompanied by someone from the plant to make sure he wasn’t breaking any safety rules and putting himself at harm.
To make a long side story short, we turned out to be so efficient, people came from all over the world to study us. Somebody downtown hired the efficiency expert full time, but later he was laid off during the first downsizing.
He reminds me of a person on an episode of Star Trek The Next Generation where this guy Lieutenant Commander Remmick comes aboard the Enterprise and he walks around inspecting everything and asking everyone questions that make them uncomfortable and at the end asks Picard if he could come work on the Enterprise. He looked so much like him, that I thought maybe our efficiency expert went to Hollywood to become an actor.
Lieutenant Commander Remmick
Back to Gene Day. I suppose the thought of the efficiency expert may have been going through my mind as I was taking notes about Gene Day at work. Like I said, at the time, I didn’t know what I was going to do with it.
It finally came to me on Thursday morning. This was the last day that Gene was going to be on the day shift, so I figured I might as well do something about it. So when I entered the shop that morning, I sat down at the desk of my foreman Andy Tubbs and began to write. The title at the top of the page was: “The Psychological Profile of Gene Day”.
Using the notes I had taken during the week, I wrote things like the following: “Gene Day walks around the Turbine Generator building with a clipboard in his hand trying desperately to look like he’s doing something important. He constantly hopes that someone is watching him because he dislikes doing so much work to act busy for no reason.
At times Gene Day gets paranoid and believes that he sees people spying on him from behind every corner (especially I-Beams). Sometimes Gene Day stands in the middle of the T-G floor staring up into space as if he forgot what he was supposed to be doing.” I’m sure I wrote more, but I don’t remember everything… but I do remember the second from the last sentence. I will save that for a couple of paragraphs from now.
I took my Psychological Profile of Gene Day and went up to the Control Room. I noticed out of the corner of my eye that Gene had just walked over toward the break room behind the Auxiliary Control Panel so I walked over by the Shift Supervisor’s office and I leaned against the top of the large Blue Monitor and placed the Psychological Profile on the top of the monitor in front of me.
Less than a minute later Gene came walking around behind me and seeing the paper on the top of the monitor came up behind me and looked over my shoulder and began to read….. He wasn’t trying to hide the fact that he was reading the paper, and I obviously knew he was there, and the title in large bold letters did say, “The Psychological Profile of Gene Day”. So, he read on.
I heard a few chuckles as he read through my interpretation of what he had done during the week. Then he came to the “Second from the Last Sentence”, as I could hear him reading quietly in my ear… The sentence read, “Gene Day sneaks up behind people and reads their private material over their shoulder!” — Bingo! I had him!
When he read that he grabbed me by the throat and started to Throttle me! Shaking me back and forth. This would have been a humdinger of a joke at that point, but I had one more sentence up my sleeve… ur… I mean on the paper….
As I was wavering (is that a word?) back and forth between life and death I managed to eke out something like: “Wait! There’s More!”…. Gene Day let up on me a little and looked down at the page and read the last sentence…… It read….. “Gene Day tries to strangle people who are only trying to help him by creating his Psychological Profile.”
That was all it took. Another perfect joke played on Gene Day, and I was able to live to tell about it. When Gene read that he was stunned into dismay. Giggling as hard as he could he retreated shaking his head in defeat.
Now, I know that Gene reads these posts, and he may remember this story a little differently, and I’ll give him that because Gene is older than dirt and his memory isn’t that good. But I was the one that was being strangled, and I still have a vivid image of those few moments. Not only do I, but so do my children, who will one day tell their children, who will say, “Mommy, will you tell us that story again about how Grandpa was strangled by Gene Day that time in the Control Room at the Coal-Fired Power Plant in Oklahoma?”
New Home in the Power Plant Electric Shop
Originally Posted January 4, 2013:
November 7, 1983 I walked into the electric shop from the Power Plant Parking Lot with Bill Rivers. Bill was an electrician that I had been carpooling with off and on for almost a year. I remember walking in the door and the first thing I noticed were two guys leaning against the counter by the coffee pot that I hadn’t seen before. They looked like a couple of Electrical Contract hands.
When I came in the door, Bill told them that I was the new electrician. They both looked very surprised. The tall one told me that his name was Art Hammond and that this was his first day as an electrician in the shop also. He had just been hired. The shorter guy introduced himself as Gene Roget (it is a French name pronounced “Row jay” with a soft J). I could tell by his shock and look of disappointment at my young appearance and obvious lack of experience that he had been expecting to be hired permanently along with Arthur.
My new foreman was Charles Foster, the person that had asked me to think about becoming an electrician in the first place. Charles was a calm mild mannered person that made it clear to me the first day that I could call him Charles, or Foster or even Chuck, but don’t call him Charlie. Ok. I made a note of that in my mind….. When the need arises to really irritate Charles, I should remember to call him Charlie. — Just a side note… That need never did arise. I did think it was funny that I had referred to my previous foreman Larry Riley as my Foster Father, and now I actually had a Foster for a Foreman. The electric shop had a short Monday Morning Safety Meeting and then I officially began my 18 year career as an electrician.
I could go on and on about how Charles Foster and I became the best of friends. I could fill up post after post of the things we did and the hundreds of conversations we had each day at lunch…. and um…. I suppose I will in good time. Today I just want to focus on what we did the first day. The first thing Charles told me after making it clear that “Charlie” was not the way to address him, was to tell me that he believed that the way I would become a good electrician was for him to not tell me much about how he would do something, but instead, he would let me figure it out myself. And if I made a mistake. That was all right. I would learn from it.
I really hated making mistakes, and I wished at the time that he would let me follow him around telling me his electrical wisdom. Finally, in my mind I thought, “Ok. If Charles didn’t mind my making mistakes, then I will try not to mind it either.” It was hard at first, but eventually, I found that making mistakes was the highlight of my day sometimes… Sometimes not… I’m sure I will talk a lot about those in the coming months.
I followed Charles up to Bill Bennett’s office. He was our A foreman, and there was a cabinet in his office where he kept all the new electrician tools. I was given a used black five gallon bucket and a tool pouch to carry my tools. Like my first day as a summer help, I had to learn the name of a lot of new tools that day. There were crimpers, side cutters, Lineman’s Pliers, strippers and Holding Screwdrivers. I was given a special electrician pocket knife and was told that I would have to keep it very sharp. I had all sizes of screwdrivers and nut drivers. I put all the tools including the tool pouch into the black plastic bucket.
A black tool bucket like this
Bill Bennett was a tall very thin black man. He was a heavy smoker. This showed on his face as he looked older than I thought he really was. He spoke with a gruff voice from years of smoking. He was a very likable person (like most Power Plant Men). He told me that they had tried really hard to get me in the electric shop because the two men in the corner offices really didn’t want me to move off of the labor crew. He explained that I owed my new career to Charles Foster who gallantly went to bat for me. I told him I was grateful.
I was also given a Pocket Protector and a pair of small screwdrivers (one a philips screw driver). Charles explained that I would probably use these small screwdrivers more than any of the other tools. I also was given a small notebook and a pen. All of this went into my pocket protector. Which went into the vest pocket on my flannel shirt.
Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these
We went back down to the electric shop and Charles introduced me to Gene Roget again and Charles asked Gene if he would help me organize my tools and teach me some of the basics around being an electrician. Gene said that the first thing I needed to do was to lubricate my new tools. It just doesn’t do to have tools that are stiff. So, we worked on lubricating them and we even went down to the machine shop to get some abrasive paste called “jewelers rouge” that we worked into the tools to loosen them up. Gene took his side cutters and threw them up in the air and as they flew up, they rapidly opened and closed making a rattling sound. He caught them as they came down as if they were tied on his hand like a YoYo.
Wire Cutters similar to what I had
I worked the tools back and forth. Lubricating them and rubbing the abrasive paste in the joint. I had no coordination, so when I would try throwing my pliers in the air like Gene did, they would end up on the other end of the workbench, or across the room. So, I didn’t try it too often when others were around where I might injure someone. I thought. I’ll work on that more when I’m alone or just Gene is around. He had good reflexes and was able to quickly dodge my miss-thrown tools.
After Lunch Charles said that we had a job up at the coalyard that we needed to work on. He told me to grab my tool bucket and the multimeter from the cabinet. The electricians referred to it as the “Simpson”.
We had a couple of these Simpson Analog Multimeters in the shop
This was before each of us were issued our very own digital Fluke Mulimeter a few years later. I’m sure the old electricians are chuckling to remember that we used to use these old Multimeters. Charles explained to me that when you are checking voltage with the meter, that after you turn the dial to check voltage, always touch the two leads together to make sure the meter doesn’t move before touching the electric wires. This is done because if something happens that causes the meter to still be on “Resistance”, then when you check the voltage, the meter or the leads could explode possibly causing an injury. I had observed the electricians in the shop doing this back when I was a janitor, and now I knew why.
Charles explained that we needed to find out why the heater in the small pump room on the northwest corner of the dumper wasn’t running. So, we went to coalyard and found the space heater mounted along the wall. We tested it to make sure it wasn’t running. After checking the circuits with the multimeter on a panel on the wall, we found that we needed to replace a small fuse block because it had become corroded from all the coal dust and moisture.
I had seen electrical he-men go up to a panel and hold a screwdriver in their hand out at arms length and unscrew screws rapidly, one at a time. Bill Rivers had been doing that up on the precipitator roof when I was working with him while I was still on the Labor Crew. He could unscrew screws from a terminal block faster than I could unwrap Hershey Kisses.
So, when Charles told me to remove the fuse block from the panel, I thought this would be an easy task. I pulled out a screwdriver from my handy dandy tool bucket and with one hand holding the screwdriver, and the other hand steadying it by holding onto the stem of the screwdriver I moved toward the panel. Charles stopped me by saying something like: “Rule number one. Never use two hands. Especially when you are working on something hot.” Ok. I see.. If one hand is touching the metal screwdriver, and I come into contact with the screw which is electrified, then… um… yeah. Ok. I dropped one hand to my side and proceeded to remove the fuse block. That other hand remained at my side for the next 18 years when working on something hot (something is hot when it has the electricity turned on).
I explained above that I was pretty uncoordinated when it came to flipping my side cutters up into the air trying to act impressive like I knew what I was doing. Well. I couldn’t hold a screwdriver steady for the life of me. I tried to match up the head of the screwdriver with the slot in the screw, but I was pretty wobbly. It was kind of embarrassing. The truth had come out. This guy can’t even hold a screwdriver still. How is he ever going to become a real electrician?
A small fuse block like this.
Using all my concentration, I fumbled about and began working the screw out of the fuse block, when suddenly the screwdriver slipped slightly and Pow! Sparks flew. I had shorted the screwdriver between the screw and the hot post on the fuse block. There was a quick flash of light and a loud pop. Geez. The first time I’m working on something, what do I do? I blew it….. literally.
Well. Charles pointed out. The electricity is off now. Go ahead and change out the fuse block, then we will find out where the source of power is for it. So, I changed it out…. Feeling a little down that my new screwdriver now had a neat little notch on the blade where the electricity had melted off a corner of my screwdriver (I carried that notched screwdriver around for the next 10 years before I replaced it). We found the breaker that had been tripped in a DP Panel (which stands for Distribution Panel) in the Dumper Air Handler room and turned it back on. We checked the heater and it was working.
At the end of the day, when Bill Bennett came down to the shop to see how my first day went, Charles told him that I had jumped right into it and already had a notch in my screwdriver to prove it. Both Bill and Charles were good-natured about it. I filled out my timecard which told a short story about my first adventure as an electrician.
As I walked to the parking lot with Bill Rivers to go home, I was thinking that even though I had been full of nerves all day, this had to be one of the most exciting days of my life. I was actually one of the electricians now. I had the feeling that somehow something was going to happen and they were going to tell me that they made a mistake and that I would have to go back to the labor crew. That was a feeling that haunted me for about 3 months after moving to the electric shop.
Comments from the original post:
-
Ron Kilman January 5, 2013
Your memory still amazes me. It’s like you kept a copy of every day’s time card. I’ll bet your time cards take up a whole room at Sooner!Great article. I still have some of the tools I was given on my first day in the Results Dept. at the Horseshoe Lake Plant in June, 1970 (don’t tell the Evil Plant Manager).
- NEO January 5, 2013
I’ve got a few screwdrivers like that myself. Goes with the territory. Good post
Coments from previous repost:
-
Classic:
“The first time I’m working on something, what do I do? I blew it….. literally.”
I really DO need to stop by here more often.
Great writing, partner. As always…Your “Spider” post is still my favorite, but this one was awfully good.
-
The Ken and Randy Power Plant Safety Show
Originally posted March 28, 2014:
Ken Couri was the plant safety guru long before Randy Dailey showed up on April 16, 1984. Ken gave us our yearly Safety training on such things as first aid and CPR. When Randy came on the scene, our yearly safety training shifted into overdrive! Ken was the one that tested my driving when we took the Defensive Driving Course the summer of 1981 during my third summer as a summer help.
The Defensive Driving Course we took when I was a summer help
I remember that Ken climbed into the pickup truck parked outside the electric shop as I walked around to the driver side. I thought. This will be a cinch. I’m a great driver. I should come out of this with flying colors. I talked about this class in the post “Power Plant Safety is Job Number One“.
I had done my “Circle for Safety” by walking around the truck to make sure there weren’t any obstacles in the way. Which, by the way, is why AT&T trucks used to stick an orange cone at the back and front corner of their truck (maybe they still do. I haven’t noticed one lately). When an AT&T worker goes to pick up the orange cones, it forces them to look in front and behind the truck to make sure that there isn’t an obstacle behind or in front of it that they might hit when they leave the parking space.
An AT&T safety demonstration of placing cones around a truck
I thought, right off the bat, I must really be impressing Ken Couri. Ken was a heavy equipment operator from the coalyard. He was a heavy equipment operator in more ways than one. In fact, I always thought of him as a gentle giant. Anyway, I thought, he probably hadn’t seen anyone do a circle for safety as geometrically circular as I was doing it. I had calculated the radius from the center of the truck to the front bumpers, added two feet and began my circle for safety checking both the front and back of the truck for obstacles. All clear.
I climbed into the truck, and without hesitation, grabbed my seat belt and strapped myself in. Smiling, I looked over at Ken, who was looking down at his checklist, apparently not paying any attention to me. Hmmm. Ok. Maybe he would be impressed by the way I backed out of the parking space.
I always had the habit of turning around and looking behind me as I backed out. So, I did just that. I carefully backed the truck out of the space while observing everything through the back window, momentarily glancing back to the front to make sure the truck didn’t strike anything as the truck pivoted around. Confident that I had done everything right, I noticed that Ken hadn’t looked up or written anything on the checklist.
He told me where to drive, and I put the truck in drive and headed in that direction. That is when I looked up at the rear view mirror for the first time. I suddenly realized I had made a grave error. I watched as Ken’s hand that held the pencil worked its way up the sheet to a particular checkbox and marked it.
You see, while I was busy creating my perfect Circle for Safety, Ken had climbed into the pickup and reached up and knocked the rear view mirror down so that it was way out of whack. I stopped the truck for a moment as I adjusted the mirror knowing full well that I was supposed to have done that long before I had put the truck in reverse. Well, that was that. No perfect score for me, and I was just beginning the test.
I didn’t know whether to feel bad about that, or to laugh about the way that Ken just sat there with no expression on his face as he checked the box that indicated that I hadn’t checked my rear view mirror before shifting into reverse as we had learned in the videos. I think I was so ashamed about not checking my rear view mirror before shifting into reverse so much that I didn’t even tell my best friend, Tim Flowers on the way home that day. Actually I was so disappointed with myself that this is the first time I have revealed this secret failure to anyone (other than Ken Couri of course, God rest his soul).
The one thing I remember most about Ken Couri during the yearly safety meetings was that he would tell us the story about Annie, who was our CPR dummy. Annie was a drowning victim in Paris France in the Seine river. Her real identity wasn’t known, but her drowning was considered such a tragedy, because someone so lovely as her had apparently committed suicide, and no one was around to save her.
Annie of the Seine
Years later, a guy named Asmund Laerdal in Norway used her image to create the CPR mannequins known as Rescue Annie.
Rescue Annie CPR resuscitation Mannequin
I am sort of an emotional person at the weirdest times, so whenever we had to practice CPR on Annie, I would get all choked up while trying not to let my coworkers see that I was having difficulty with performing CPR on a mannequin of a real person that had died from a real drowning back in the 1800’s. The only comfort I had was knowing that, as Ken Couri pointed out and Anna Edwards said in 2011: Her enigmatic smile is known to millions around the world and she has been kissed billions of times. (Read more: http://www.dailymail.co.uk/news/article-1393184/How-girl-drowned-Paris-kissed-face-time.html#ixzz2xJxJIJNj).
Once every year we would receive First Aid training from Ken and Randy. Each time we would hear the same stories about Safety and their importance. Randy, who had been a medic in the army had a full array of sayings (maybe the Power Plant men can add a comment to the post with some of his phrases). I wish I could remember them all at the same time.
Unfortunately they only come to me when an appropriate occasion arises. Like I see some unsafe act, or a possible situation where a tragedy could happen like the ones that Randy would describe. I remember his speech about the ABCs that you perform when you run across someone that is unconscious. You first “Assess” the situation. Then you check for “Breathing”, then you check their “Circulation”. He would always end by saying that “A weak pulse is hard to find.”
He would demonstrate this by tapping the dummy on the shoulder as an example and say, “Hey. Are you all right? You don’t want to perform CPR on someone that is only taking a nap in the park.” Then he would turn to one of us and say, “Call 911!” That was called, “implementing the EMS system. EMS stood for the “Emergency Medical System”. Then he would place his ear close to the mouth of the dummy while he was checking the pulse on the neck. He would repeat, “A week pulse is hard to find.”
In the past I may have described Randy Dailey as someone that would remind you of Barney Fife from the Andy Griffith Show… Maybe I haven’t, but he sort of does sometimes. You tell me.
Barney Fife played by Don Knotts in the Andy Griffith Show
Here is Randy Dailey:
Randy Dailey, known as Mr. Safety to Real Power Plant Men
Randy may occasionally remind a novice of Barney Fife, but to the experienced Power Plant Man, just looking at him and a Power Plant Man automatically thinks “Safety”! During the “We’ve Got the Power Program” (See the post: “Power Plant “We’ve Got the Power” Program) Randy Dailey invented a special pen that you could put in your handy dandy pocket protector worn by most respectable Power Plant Men that would beep at you if you were bent over too far and were putting yourself at risk of a back injury.
Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these. Actually, I think I had one that has Castrol on it
Randy had a lot of compassion as he trained us on safety. You could tell that he had an agenda, and that was to make sure that all of us came out of the class knowing how to provide the best first aid possible to our fellow Power Plant Men as possible. When he spoke to us about dressing a wound and performing CPR on someone who had no pulse, he never cracked a joke (well, except when he showed us how to create a diaper out of the triangular bandage).
He was serious about safety, and we carried that with us when we left the class. We knew that Randy had seen the worst of the worst during his life. I remember Monday, May 8 of 1989 we had just begun our safety training course. Randy may not have been thinking about the fact that he was turning 40 that day, but for some reason I had always known his birthday.
He told us a tragic story of a 4th of July celebration that he had attended. The topic was knowing when “not to do CPR”. I think he was in Arkansas. He was sitting in the bleachers watching the celebration when suddenly something went terribly wrong. As the crowd was watching the large explosions overhead creating huge balls of red and green and blue, there was suddenly an explosion on the ground that was unexpected.
A piece of metal shot out of the area where the fireworks were being ignited and flew into the crowd. I think he said it was a young lady that was struck in the head by a metal plate that cut the top of her head completely off just above the eyebrows. Randy went on to explain that in a case like this, CPR would obviously be useless, so use your common sense when assessing your surroundings.
Each year when Randy would tell this story, I would feel this sick feeling in my stomach, and I would taste this strange taste of blood in my mouth as the corners of my mouth would go down in disgust. This was an obvious tragedy that Randy witnessed, and the feelings I had were not so much about the person that was struck as they were instantly killed. It was because behind the stalwart face of Randy, while he told this story I could see the tremendous sorrow that he felt while recounting this story to us.
I knew, and I believe we all knew, that the reason that Randy was such a great Safety instructor was because he really and truly wanted to save lives. That was his ultimate goal. He would begin his mouth-to-mouth resuscitation training by quoting from the Bible. It was from Kings 4:34. He would say that mouth-to-mouth is found in the Bible. Then he would quote word-for-word from the book about Elisha saying:
“And he went up, and lay upon the child, and put his mouth upon his mouth, and his eyes upon his eyes, and his hands upon his hands: and he stretched himself upon the child; and the flesh of the child waxed warm.”
Randy pointed out, this is Mouth-to-mouth resuscitation in the Old Testament folks! So, when a situation arises, don’t be worried about germs and the like. Do what is necessary to save a life! Again I could see his mind flashing back to some tragedy that drove Randy on to make sure we were properly trained in First Aid and CPR.
Randy didn’t teach us Safety to gain “Bonus Points” from management as some pseudo-Power Plant Men did. Randy, from the day he came to the plant in May 8, 1984 (What a birthday present to become a Power Plant Man on your Birthday!) until the day I left on August 16, 2001, was a true hero to me. I don’t know if he ever served in combat. I don’t know if he ever received one little stripe or medal on his uniform in the Army. What I do know is that to this day I am eternally grateful that I have had the opportunity to meet one of the most remarkable souls of our time the day Randy Dailey showed up at the Power Plant. I have always been certain that God himself sent Randy to administer his Safety Wisdom to the Power Plant Men at the Coal-fired Power Plant in North Central Oklahoma! Randy continued to bless all of us year after year.
Back to Plain Ol’ Power Plant Back Pain
Does anyone know where the phrase, “Step on a Crack, Break Your Mother’s Back” came from? I’m sure there is a story behind that one. Maybe even a lot of different origins. I can distinctly remember a day in the Power Plant when a Power Plant Man stepped on a crack and broke his own back.
I remember looking out of the seventh floor window of my friends dorm room when I was a freshman in college watching students returning from classes about 6 months before the Power Plant Man broke his back. I was watching closely to see if any of them were purposely missing the cracks as they walked down the sidewalk toward the entrance. Out of about 20 people two of them purposely stepped over every crack in the sidewalk.
In the post “Power Plant Safety is Job Number One” I told the story about four of us were carrying a very long extension ladder through the maintenance shop at the Coal-fired Power Plant in North Central Oklahoma one summer morning in 1979 when Tom Dean stepped on a crack (well, it was a cracked piece of plywood that had been placed over a floor drain because the floor grate was missing), and when as he stepped on it, he lost his balance enough to twist himself around. By the time he stopped twirling, he was in immense pain as he had destroyed any chance for comfort for the next 6 months.
A Cast Iron Floor drain cover was missing from the drain
So, I could understand the dangers of stepping on cracks even when they appear to be insignificant. What that has to do with my mom I’m not sure. However, one day when my sister was walking with my mom on the campus of Oklahoma State University, my sister may have stepped on a crack at that time, as well as my mom, which sent her plummeting the five feet to the ground resulting in a broken hip.
This makes me wonder that since the times have changed, it may be time to change the saying to something else. Maybe something like “Smoke some crack, break your parent’s piggy bank” would be more appropriate for these times. Oh well, I’ve never been much of a poet.
Anyway, back to the subject of back pain.
The number one favorite topic during Safety Meetings at the Power Plant was Back Safety. We were told (and rightly so) that accidents where the back is injured cost the company and the employee more than any other injury. Once you really hurt your back, you can expect to have back pain the rest of your life. It only takes one time. — Times may have changed since 1979, so that now you can have some excellent back surgeries to help correct your back injuries. Even with these, you will never be completely free from back pain.
In the Power Plant Post, “When Power Plant Competition Turns Terribly Safe” I told a story about how our team came up with hundreds of safety slogans in an attempt to win the coveted Power Plant Safety Award Pizza at the end of the year. A Pizza that continued to allude us for 2 and a half years. During our meetings to invent the most catchy safety slogans, Andy Tubbs (or was it Ben Davis) came up with a slogan that said, “Lift with your legs, not your back. Or you may hear a lumbar crack”. — See. I wish I could come up with doozies like that! This takes the idea of a crack and a back and turns it around, if you think about it. Now instead of a crack hurting your back, its about a strain on your back creating a crack. — I know… probably just a coincidence….
Lumbars don’t really crack. The discs indicated in blue become damaged
One morning Sonny Kendrick, our electric specialist at the time, while sitting in the electric lab during break, let out a whopper of a sneeze. When he did, he suddenly knew what it felt like to experience tremendous back pain. One sneeze and he was out of commission for many weeks.
Sonny Kendrick as he is today or… yesterday…
One day, when Charles Foster, my very close friend, and electric foreman, were talking about back pain, I realized that a good portion of Power Plant Men suffered with back pain. — At the risk of sounding like Randy Dailey teaching our Safety Class, I’m going to repeat myself, “You only have to hurt your back one time to have a lifetime of back pain.”
The company would focus a lot of their safety training around the importance of proper lifting techniques in order to prevent back accidents (not to be confused with backing accidents which is when you back out of a parking space — which is also a common accident — though usually less severe — unless you happen to be a Ford Truck). We would learn how to lift with our legs and not with our back.
You see, it wasn’t just that one sneeze that caused Sonny’s plunge into Back Pain Hell, and it wasn’t just stepping on the cracked plywood floor drain cover that broke Tom’s back (I know “Broke Back” is a misnomer since the back isn’t exactly broke). The problem is more systemic than that. This is just the final result of maybe years of neglecting your back through various unsafe activities.
The two important points I remember from watching the safety videos during our monthly safety meetings was that when you slouch while sitting, you put a needless strain on your lower back. So, by sitting with good posture, you help prevent a future of pain. The second point I remember is that you need to keep your stomach muscles strong. Strong stomach muscles take the weight off of your back when you’re just doing your regular job.
The big problem that finally causes the disc in your lumbar region of your spine to break after neglecting it through these other means is to lift a heavy object by bending over to pick it up instead of lifting the load with your legs. So, the phrase that we always heard was “Lift with your Legs. Not your Back”. You do this by bending your knees instead of just your hips.
Ok. I know you are all thinking the same thing I am thinking (right? Yeah. You are). Bending both your knees and hips saves your back. Isn’t there another word for when you bend your knees and hips at the same time? — Yeah. Yet, I don’t remember hearing it during any of our Safety Videos. — Oh. It was implied, they just never came out and said it…. What they really mean to say is, “Squat”. Yeah. “Squat”. When you bend your knees and hips, isn’t that “Squatting?”
Times have changed…. I mean….. Doesn’t everyone today have a “Squatty Potty”?
The Squatty Potty Logo
Don’t we all have “I ‘heart’ 2 Squat” tee-shirts?
See how happy you can be to Squat?
To learn more, you can watch this video:
This doesn’t just work with the Squatty Potty to help you drop your loads, it also works when lifting heavy loads. So, remember the next time you are going to bend over to pick something up…. Squat instead.
Other lifting tips include keeping the load close to your body and not holding your breath but tightening your stomach muscles, and don’t lift something too bulky by yourself. Don’t twist your body when picking something up, face the load directly. A weightlifter once told me that when you lift, feel the weight on the heel of your feet, not on the balls of your feet.
Randy Dailey, the Safety Guru of our Power Plant, and an expert machinist invented a pen that you could put in your pocket protector in your shirt pocket that would alert you by beeping if you leaned over too far. It was an ingenious device to remind you to lift with your legs instead of your back.
In one of the safety videos we watched about back safety, there was a short stalky scientist that explained the dynamics of lifting and how easy it was to put a tremendous strain on your back by leaning over and picking something up. He said that “People choose the more simple way to pick something up. Not the easiest way.”
Doesn’t that sound like the same thing? Isn’t the simplest way the easiest way? Well. You would think so, but it isn’t always the case. This Doctor of Back-ology went on to explain his statement. He explained that the simplest way to pick up an object on the floor is to bend at the hip. It is one movement. Bend at the hip. — However…. The easiest way to pick up the object is to bend both your knees and your hips to pick up the object. Since you keep your back straight and you lift with your leg muscles that are the most powerful muscles in your body. He avoided using the word, “Squat”, but that’s what he meant.
In order to reduce back injuries at the plant, the company made back belts available at the plant.
A Back Support Belt
Note that this picture not only shows a Power Plant Man wearing a Back Support Belt, but he also is wearing the right kind of Tee-Shirt. It has a vest pocket where you can put a Pocket Protector for your little screwdriver and your Back Alert Pen created by Randy Dailey.
Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these
The use of back belts was new around the late 1980’s. Even though we had them available through the tool room when we wanted them, few people wore them. The warehouse team wore them a lot. I suppose that is because they were lifting and moving things all day long.
In the warehouse Bob Ringwall, Darlene Mitchell and Dick Dale used to have back belts on when I would visit the warehouse to pick up a part, or to visit my friends. I don’t remember if Bud Schoonover would wear a back belt. How’s this for a slogan…. “Be a Safety Black Belt…. When Lifting, wear your Back Belt.” I know. I should stop when I’m ahead, only I’m so far behind now I may never catch up.
There was a question about whether wearing a back belt was really a good idea. It was thought that people might tend to substitute using their stomach muscles while lifting with the back belt, resulting in weaker stomach muscles. So we were cautioned not to go around wearing back belts all day long. Only when we were going to be doing a job where we had to do a lot of lifting. I suppose now, after years of research, there is a lot more data to tell us one way or the other. I haven’t heard what the latest injury jury has said on this subject.
Even though I titled this post “…Plain Ol’ Power Plant Back Pain”, there is nothing plain about back pain. I just thought it sounded like a catchy title.
I was lucky enough that during the 20 years I spent working at the Power Plant, I never really hurt my back. To this day, I have been able to avoid living with perpetual pain in my back. — I have been accused of causing pain in other people’s necks. Also, I don’t think the many times that people told me I was a pain in their back side, they were referring to the Lumbar region. I think they meant an area just below the tailbone. I hope that by bringing to their attention the benefits of the Squatty Potty that I have been able to relieve (or prevent) a little of that lower lumbar pain.
Now when someone says, “You don’t know Squat”, you can correct them!
Comments from the original post:
-
-
I can remember getting into a taxi whilst in my late teens, turning in the seat to sling a bag in the back seat, only to pull something in my back. The pain lasted for ages.
These days, it’s arthritis being the culprit. Back pain is as bad as everybody says it is.
Good page 🙂
-
-
Wasn’t the back alert pen given to someone in the garage to try out. Rumor is they didn’t like it because it kept going off all day every time they bent over.
Hmmmmmm
Suppressing the Truth about Power Plant Coal Dust Collection
Some of you may be aware that an empty grain silo can explode if the dust from the grain is allowed to build up and an ignition source begins a chain reaction that causes the entire grain silo to explode like a bomb. I haven’t heard about a grain explosion for a few years. Maybe that is because a lot of effort is put into keeping the silo clean. Think of how much easier it would be for a coal dust explosion. After all… we know that coal when turned into a fine powder is highly combustible.
When you are covered in coal dust from head-to-toe day after day you seem to forget just how explosive the coal dust you are washing down can be. Our coal-fired Power Plant in North Central Oklahoma was concerned after our downsizing in 1994 that by eliminating the labor crew from the roster of available Power Plant Jobs, that the operators may not be able to keep the entire coal handling system free from coal dust.
The plant had already experienced a major explosion the year before (in 1996) the “Dust Collector Task Force” was formed (See the post: “Destruction of a Power Plant God“). It was clear that the question had been asked by those concerned, “Are there any other areas in the plant that could suddenly explode?” Two electricians were asked to be on the Dust Collection Task Force. Jimmy Moore and myself.
Jimmie Moore
We had a salesman of our brand of Dust Collectors come to the plant and train us on the proper maintenance of the dust collectors that were already in place. When he arrived he showed us a video that showed examples of plants that had explosions caused by coal dust. Here is a picture I found on Google of a coal dust explosion at a power plant:
Power Plant after a coal dust explosion
We heard a story about a coal plant where the explosion began at the coal yard, worked its way up the conveyor system, blew up the bowl mills and threw debris onto the main power transformer, which also blew up. Ouch. We thought it would be a good idea to do something about our coal dust problems. Stopping an ounce of coal dust is worth a pound of explosives… as the saying goes.
The Instrument and Controls person on our team was Danny Cain. He had become a Power Plant employee a year before the downsizing and had been at the plant for about four years at this point.
Danny Cain
When we began looking at our dust collectors, we found that the dust collectors on the dumper had been rusted out over the past 18 years since they were first put into operation. the reason was that they were located down inside the dumper building below ground where they were constantly exposed to coal and water. I hadn’t seen them actually running for years. They were definitely going to have to be replaced with something.
Okay class… I know this is boring, but you have to learn it!
We had some fairly new dust collectors on the crusher tower and the coal reclaim, but they didn’t seem to be doing their job. They used instrument air (which is clean, dehumidified air) in order to flush the coal off of some bags inside. When they were installed, new instrument air compressors were installed in the coal yard just to handle the extra “instrument air” load for the dust collectors. The very expensive and large dust collectors just didn’t seem to be doing anything to “collect” the dust.
Dust Collector System
You can see that the dust collector is very large. You actually have to climb on top of them to change out the bags inside.
When the dust collector sales man came to talk to us about dust collection, in the middle of his “Proper Maintenance” speech he happened to mention something about…. “…and of course, if you don’t have the air pulse set at exactly 32 milliseconds, the dust collector isn’t going to work at all.” “Wait! What did he say?” What pulse?”
He explained that Instrument air is puffed through the collector bags with exactly a 32 millisecond pulse at a predetermined interval. If the pulse is longer or shorter, then it doesn’t work as well. The idea is that it creates a ripple down the bag which shakes the dust free. We had been studying our dust collectors in the coal yard, and the interval had been completely turned off and the instrument air was constantly blowing through the dust collectors. This guy was telling us that it was just supposed to be a quick pulse.
Everyone in the room looked at each other with stunned silence. The salesman just looked at us and said…. “It’s right there in the instruction manual….” pointing his finger at the page. We thought (or said)… “Instruction manual? We have an instruction manual?”
We said, “Class dismissed! Let’s go to the coalyard after lunch and see about adjusting the “pulse” on the dust collectors.
In order to measure a pulse of 32 milliseconds, I needed the oscilloscope that I kept out at the precipitator control room to measure the “Back Corona” when trying to adjust the cabinets to their optimal voltage. I ran out to the precipitator and retrieved it and brought it with me to the coal yard along with my tool bucket and my handy dandy little screwdriver in my pocket protector:
A pocket protector is a must for electricians and computer nerds who need a place to keep their small tools.
When we arrived at the crusher tower where the two long belts sent coal to the Power Plant 1/2 mile away, one of the belts was running. coal dust was puffing around the equipment making the room hazy, which was normal. Water hoses were kept running on the floor trying to wash at least some of the dust down the drain. This was a typical day in the coal handling system. Coal dust everywhere.
I opened the control cabinet for the dust collector and hooked up the oscilloscope.
I used an Analog oscilloscope like this until we were given a new Digital one where you could zoom in and do all sorts of neat things.
When we arrived there was no pulsing. The instrument air was on all the time. So, I flipped a switch which put it in a pulse mode. The pulse time was set up to the maximum setting of about a minute (that meant that when the pulse turned on, it stayed on for a minute). As I was playing with the controls, three of the task force members were standing up on the walkway between the two belts watching the discharge from the dust collector (you see, after the dust collector collected the dust, it dropped it back onto the conveyor belt just up the belt from where the coal dropped onto the belt). Nothing was coming out of the chute.
As I adjusted the setting down from one minute to one second, I had to keep changing settings on the oscilloscope to measure how long the air took to turn on and off. When I finally had the pulse down within 1/10 of a second (which is 100 milliseconds), then I could easily measure the 32 millisecond interval that we needed. I was beginning to think that this wasn’t going to really do anything, but I remembered that I had seen stranger things on the precipitator controls where the difference between a couple of milliseconds is like night and day.
When the pulse was down to 35 milliseconds I looked up toward the conveyor system because I heard a couple of people yelling. They were running down the walkway as coal dust came pouring out of the dust collector chute causing a big cloud of dust to puff up. We all ran outside and waited for the dust to settle. We felt like cheering!
We were practically in disbelief that all we had to do was adjust the pulse of air to the right millisecond pulse and the dust collector began working. This meant a lot more than a working dust collector. This also meant that we needed only a fraction of the instrument air (literally about 1/20,000) than we had been using.
In other words. The new Instrument Air Compressors at the coal yard that had been installed to help boost air pressure at the coal yard since the installation of the dust collectors were really never needed. And all this was done by turning a screwdriver on a small potentiometer in a control cabinet. It pays to read the manual.
a small Power Plant potentiometer like this
Along with some rewiring of the controls to the dust collector system, and a redesign of the apron around the dust chutes by Randy Dailey and Tim Crain, the coal handling areas became practically dust free as long as regular preventative maintenance was performed.
Tim Crain
Randy Dailey, known as Mr. Safety to Real Power Plant Men
That is, everywhere except for the coal dumper. This is where the coal trains dump their coal into a hopper which is then carried on three conveyors out to the coal pile.
A view of the coalyard from the top of the Smoke Stack
You can see the conveyor going up to the building right next to the coal pile. That is from the dumper which is the small off white building next to the fly ash silos. The crusher tower is the tall thin building at the end of the long belts going up to the plant.
We still had a problem with the dumper. The cost of buying new dust collectors and putting them outside where they wouldn’t be so quickly corroded by the harsh environment was “too costly”. Jim Arnold, the maintenance Supervisor made that clear. We had to come up with another solution.
Without a dust collector, the solution was “Dust Suppression”. That is, instead of collecting the dust when it is stirred up, spray the coal with a chemical that keeps the dust down in the first place. This was a good idea, except that it had to be turned off for three months during the winter months when it could freeze up.
A company called Arch Environmental Equipment came and talked to us about their dust suppression system.
Arch Environmental
They showed us something called: The “Dust Shark”.
Dust Shark by Arch Environmental
The dust shark sprayed the belt on the side with the coal and scraped the bottom side in order to make sure it was clean when it passed through. This was the solution for the dumper. It also worked well at other locations in the plant where you could use it to keep the area clean from coal when the coal was wet from the rain and would stick to the belt.
The task force was considered a success. I have two side stories before I finish with this post.
The first is about Danny Cain.
Danny was a heavy smoker. He had a young look so that he looked somewhat younger than he was. He had been born in July, 1964 (just ask the birthday phantom), so he was 33 during July 1997 when we were working on the task force, but he looked like someone still in college. Whenever he would pull out a cigarette and put it in his mouth, he suddenly looked like he was still in High School.
I told Danny that one day. I was always one to discourage people from smoking…. He seemed a little hurt, and I said I was just calling it like I saw it. He was standing outside the electric shop smoking one day, so I took the air monitor that I used when I had to go in the precipitator and asked Danny if I could borrow his lit cigarette for a moment.
Confined Space Air Monitor
I put the butt of the cigarette up to the intake hose for the monitor about long enough for a puff and then I handed it back to him. The monitor measures the amount of Oxygen in the air, the amount of explosive gases, the amount of Carbon Monoxide and the amount of H2S gas (Hydrogen Sulfide, an extremely toxic gas). The monitor, as expected began beeping…
What we didn’t expect to see was that not only did the Carbon Monoxide peg out at 999 parts per million, but the H2S went out the roof as well. In fact, everything was bad. The Percent explosive was at least 50% and the oxygen level was low. It took about 5 minutes before the meter measured everything clean again. Danny didn’t want to see that.
I said, “Danny? Carbon Monoxide Poisoning! Hello???!!!”
When we were on the Dust Collector Task Force, at one point we had to program “Programmable Logic Controllers” (or PLCs). I had been to an Allen Bradley school a few years earlier where we had learned the basics for this. Here is my certificate from 9 years earlier…
PLC Training Certificate
When Danny and I sat down to program the controller, it became clear that he expected the programming task to take a couple of weeks. He started out by drawing some high level logic on the white board. I said… “wait… wait… let’s just start programming the thing.” He told me that wasn’t the way we did things. First we had to figure out the entire program, then we would program it.
The PLCs we were going to program were just some small ones we had bought to run the dust sharks and the dust collectors… Here’s one like it.
MicroLogix PLC like we were programming
I told Danny when I program something I find that its a lot easier and quicker if we just program it as we understand the requirements and then that way we can test it as we go. Then when we figure out what we need, we will be done. In fact… it took us 4 hours and we were done… not two weeks.
End of the Danny Cain Side Story…. On to the second side story… much shorter….
I think it was March 2003 (the power plant men can remind me)…. a year and a half after I had left the plant, the Coal Dumper blew up. It was the middle of the night, a coal train had finished dumping the coal about an hour earlier. No one was in the dumper at the time and the entire dumper exploded. The roof of the dumper, as I was told, was blown off of the building. No injuries or deaths. The “Dust Shark” Dust Suppression system had been turned off because it was winter.
I suppose that the insurance company ended up paying for that one. I don’t know. This is what happens when you say that it is too expensive to replace the dust collectors and instead you buy one of these:
Power Plant Feather Duster
Psychological Profile of a Power Plant Control Room Operator
Originally posted on July 6, 2012:
I suppose that many parents while raising their children would hear them say, “Dad, can you read that story to us again about the pirates that go to the island to find the treasure but Jim Hawkins fights them single-handed?” Or their children might say to their mother, “Will you tell us the story again about how you met daddy?” In my household, my children would say, “Dad, tell us another story about how you played a joke on Gene Day when you were working at the Coal-Fired Power Plant in Oklahoma? Those are always the best!”
As I pointed out in my third post this year called “Power Plant Humor And Joking With Gene Day” the first time I met Gene Day, I could tell that he was the type of person that would take a joke well, or so I thought…. One of the favorite stories my daughter would like for me to tell her as she was growing up was the one where I had created a Psychological Profile of Gene Day, who at that time was an Auxiliary Operator.
It began one day when I was leaving the electric shop through the Turbine Generator (T-G) building ground floor. A very noisy location as large steam pipes wound around under the Turbines where the steam caused a rumbling or whining sound. It was normal when walking through this area to reach up to the ear plugs that were draped over your shoulders and put them in your ears because the decibels were dangerously high if you were exposed earplugless too long.
Earplugs on a cord that can be draped over your shoulders when not in use.
I stepped from the landing leading from the electric shop and started toward number 1 boiler when I spied Gene Day making his way around the first floor of the T-G building inspecting equipment and marking his documents indicating that they were operating correctly. As I saw him turn toward my direction I quickly dodged behind the nearest metal pillar (I-Beam). I peaked my head out from behind the pillar and took out the notepad that was in my back pocket, and the pen from my vest pocket pocket protector.
A pocket protector is a must for electricians and computer nerds who need a place to keep their small tools.
Gene saw me and gave me a suspicious look as I began feverishly writing in my notepad while looking from my notepad back to Gene and then back to what I was writing. After I had done this for about 10 seconds or so, I put my pad away, my pen back in the pocket protector and strolled away toward unit 1 to continue my work.
A notepad like this
It happened that this particular week was Gene’s week to monitor the equipment in the T-G building, so throughout the week he would be making his way somewhere around the T-G building with his clipboard in hand. Each time I encountered him I would do the same thing. I would visibly hide behind a beam and write notes in my notepad. I saw Gene rather frequently during the week because the majority of the time, I left the electric shop by going through the T-G room to one of the boilers and then to the precipitators, where I spent most of my time working at this time in my career (but that is another story for a later time).
Each time, Gene would watch me suspiciously knowing that I was just messing with him, but not exactly sure what I was “up to”. At the time, I wasn’t sure either. So I just wrote down what I saw Gene doing, that way, if he ran over and grabbed my notepad from me, it wouldn’t say anything other than what I saw.
It had happened at the plant a few years earlier when I was a janitor that the company had hired an efficiency expert to monitor the employees at the plant. He would walk around the plant with a stopwatch observing the employees. When he saw them he would write notes on his clipboard. It became very unnerving because you would walk around the corner and there he would be standing writing something down about you.
I went to the Assistant Plant Manager Bill Moler and told him that this creepy guy keeps showing up in the main switchgear by the janitors closet. And every time he sees me, he writes something down. I told Bill that it really bothered me. He explained that he is an efficiency expert and he has a certain path that he takes throughout the day and takes a snapshot of what the workers are doing at that moment and writes it down. By doing that he calculates how efficient we are. It seemed pretty silly to me, because most mechanics when they saw him coming put their tools down and did nothing while he walked by until he was out of sight again.
When I was on the labor crew a few weeks later, and I was blowing coal dust off of all the I-Beams above the bowl mills with a high pressure air hose, I looked down, and through my fogged up goggles I could see this guy standing directly under me. I was about 50 feet above him crawling across an I-Beam with the air hose blowing black dust everywhere. He had crossed my barrier tape to go into the bowl mill area to see how efficient I was being.
This is the type of barrier tape I was using. It is made of woven plastic fibers.
I was so mad I turned off my air hose, climbed down the wall Spiderman-like (no. not head first) and went straight into the A-Foreman’s office and told Marlin McDaniel that the Efficiency Expert had crossed my barrier tape and was standing directly under me as I was blowing down the beams with air.
It turned out that the Efficiency Expert had gone upstairs to complain that some guy in the bowl mill had dumped a bunch of coal dust on him while he was monitoring him from below. Evidently, he wasn’t expert enough to know you weren’t supposed to cross someone’s barrier tape without permission, as was indicated on the caution tags that were tied to the barrier tape. From that point on, the efficiency expert (now in lowercase) had to be accompanied by someone from the plant to make sure he wasn’t breaking any safety rules and putting himself at harm.
To make a long side story short, we turned out to be so efficient, people came from all over the world to study us. Somebody downtown hired the efficiency expert full time, but later he was laid off during the first downsizing.
He reminds me of a person on an episode of Star Trek The Next Generation where this guy Lieutenant Commander Remmick comes aboard the Enterprise and he walks around inspecting everything and asking everyone questions that make them uncomfortable and at the end asks Picard if he could come work on the Enterprise. He looked so much like him, that I thought maybe our efficiency expert went to Hollywood to become an actor.
Lieutenant Commander Remmick
Back to Gene Day. I suppose the thought of the efficiency expert may have been going through my mind as I was taking notes about Gene Day at work. Like I said, at the time, I didn’t know what I was going to do with it.
It finally came to me on Thursday morning. This was the last day that Gene was going to be on the day shift, so I figured I might as well do something about it. So when I entered the shop that morning, I sat down at the desk of my foreman Andy Tubbs and began to write. The title at the top of the page was: “The Psychological Profile of Gene Day”.
Using the notes I had taken during the week, I wrote things like the following: “Gene Day walks around the Turbine Generator building with a clipboard in his hand trying desperately to look like he’s doing something important. He constantly hopes that someone is watching him because he dislikes doing so much work to act busy for no reason.
At times Gene Day gets paranoid and believes that he sees people spying on him from behind every corner (especially I-Beams). Sometimes Gene Day stands in the middle of the T-G floor staring up into space as if he forgot what he was supposed to be doing.” I’m sure I wrote more, but I don’t remember everything… but I do remember the second from the last sentence. I will save that for a couple of paragraphs from now.
I took my Psychological Profile of Gene Day and went up to the Control Room. I noticed out of the corner of my eye that Gene had just walked over toward the break room behind the Auxiliary Control Panel so I walked over by the Shift Supervisor’s office and I leaned against the top of the large Blue Monitor and placed the Psychological Profile on the top of the monitor in front of me.
Less than a minute later Gene came walking around behind me and seeing the paper on the top of the monitor came up behind me and looked over my shoulder and began to read….. He wasn’t trying to hide the fact that he was reading the paper, and I obviously knew he was there, and the title in large bold letters did say, “The Psychological Profile of Gene Day”. So, he read on.
I heard a few chuckles as he read through my interpretation of what he had done during the week. Then he came to the “Second from the Last Sentence”, as I could hear him reading quietly in my ear… The sentence read, “Gene Day sneaks up behind people and reads their private material over their shoulder!” — Bingo! I had him!
When he read that he grabbed me by the throat and started to Throttle me! Shaking me back and forth. This would have been a humdinger of a joke at that point, but I had one more sentence up my sleeve… ur… I mean on the paper….
As I was waivering (is that a word?) back and forth between life and death I managed to eke out something like: “Wait! There’s More!”…. Gene Day let up on me a little and looked down at the page and read the last sentence…… It read….. “Gene Day tries to strangle people who are only trying to help him by creating his Psychological Profile.”
That was all it took. Another perfect joke played on Gene Day, and I was able to live to tell about it. When Gene read that he was stunned into dismay. Giggling as hard as he could he retreated shaking his head in defeat.
Now, I know that Gene reads these posts, and he may remember this story a little differently, and I’ll give him that because Gene is older than dirt and his memory isn’t that good. But I was the one that was being strangled, and I still have a vivid image of those few moments. Not only do I, but so do my children, who will one day tell their children, who will say, “Mommy, will you tell us that story again about how Grandpa was strangled by Gene Day that time in the Control Room at the Coal-Fired Power Plant in Oklahoma?”
New Home in the Power Plant Electric Shop
Originally Posted January 4, 2013:
November 7, 1983 I walked into the electric shop from the Power Plant Parking Lot with Bill Rivers. Bill was an electrician that I had been carpooling with off and on for almost a year. I remember walking in the door and the first thing I noticed were two guys leaning against the counter by the coffee pot that I hadn’t seen before. They looked like a couple of Electrical Contract hands.
When I came in the door, Bill told them that I was the new electrician. They both looked very surprised. The tall one told me that his name was Art Hammond and that this was his first day as an electrician in the shop also. He had just been hired. The shorter guy introduced himself as Gene Roget (it is a French name pronounced “Row jay” with a soft J). I could tell by his shock and look of disappointment at my young appearance and obvious lack of experience that he had been expecting to be hired permanently along with Arthur.
My new foreman was Charles Foster, the person that had asked me to think about becoming an electrician in the first place. Charles was a calm mild mannered person that made it clear to me the first day that I could call him Charles, or Foster or even Chuck, but don’t call him Charlie. Ok. I made a note of that in my mind….. When the need arises to really irritate Charles, I should remember to call him Charlie. — Just a side note… That need never did arise. I did think it was funny that I had referred to my previous foreman Larry Riley as my Foster Father, and now I actually had a Foster for a Foreman. The electric shop had a short Monday Morning Safety Meeting and then I officially began my 18 year career as an electrician.
I could go on and on about how Charles Foster and I became the best of friends. I could fill up post after post of the things we did and the hundreds of conversations we had each day at lunch…. and um…. I suppose I will in good time. Today I just want to focus on what we did the first day. The first thing Charles told me after making it clear that “Charlie” was not the way to address him, was to tell me that he believed that the way I would become a good electrician was for him to not tell me much about how he would do something, but instead, he would let me figure it out myself. And if I made a mistake. That was all right. I would learn from it.
I really hated making mistakes, and I wished at the time that he would let me follow him around telling me his electrical wisdom. Finally, in my mind I thought, “Ok. If Charles didn’t mind my making mistakes, then I will try not to mind it either.” It was hard at first, but eventually, I found that making mistakes was the highlight of my day sometimes… Sometimes not… I’m sure I will talk a lot about those in the coming months.
I followed Charles up to Bill Bennett’s office. He was our A foreman, and there was a cabinet in his office where he kept all the new electrician tools. I was given a used black five gallon bucket and a tool pouch to carry my tools. Like my first day as a summer help, I had to learn the name of a lot of new tools that day. There were crimpers, side cutters, Lineman’s Pliers, strippers and Holding Screwdrivers. I was given a special electrician pocket knife and was told that I would have to keep it very sharp. I had all sizes of screwdrivers and nut drivers. I put all the tools including the tool pouch into the black plastic bucket.
A black tool bucket like this
Bill Bennett was a tall very thin black man. He was a heavy smoker. This showed on his face as he looked older than I thought he really was. He spoke with a gruff voice from years of smoking. He was a very likable person (like most Power Plant Men). He told me that they had tried really hard to get me in the electric shop because the two men in the corner offices really didn’t want me to move off of the labor crew. He explained that I owed my new career to Charles Foster who gallantly went to bat for me. I told him I was grateful.
I was also given a Pocket Protector and a pair of small screwdrivers (one a philips screw driver). Charles explained that I would probably use these small screwdrivers more than any of the other tools. I also was given a small notebook and a pen. All of this went into my pocket protector. Which went into the vest pocket on my flannel shirt.
Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these
We went back down to the electric shop and Charles introduced me to Gene Roget again and Charles asked Gene if he would help me organize my tools and teach me some of the basics around being an electrician. Gene said that the first thing I needed to do was to lubricate my new tools. It just doesn’t do to have tools that are stiff. So, we worked on lubricating them and we even went down to the machine shop to get some abrasive paste that we worked into the tools to loosen them up. Gene took his side cutters and threw them up in the air and as they flew up, they rapidly opened and closed making a rattling sound. He caught them as they came down as if they were tied on his hand like a YoYo.
Wire Cutters similar to what I had
I worked the tools back and forth. Lubricating them and rubbing the abrasive paste in the joint. I had no coordination, so when I would try throwing my pliers in the air like Gene did, they would end up on the other end of the workbench, or across the room. So, I didn’t try it too often when others were around where I might injure someone. I thought. I’ll work on that more when I’m alone or just Gene is around. He had good reflexes and was able to quickly dodge my miss-thrown tools.
After Lunch Charles said that we had a job up at the coalyard that we needed to work on. He told me to grab my tool bucket and the multimeter from the cabinet. The electricians referred to it as the “Simpson”.
We had a couple of these Simpson Analog Multimeters in the shop
This was before each of us were issued our very own digital Fluke Mulimeter a few years later. I’m sure the old electricians are chuckling to remember that we used to use these old Multimeters. Charles explained to me that when you are checking voltage with the meter, that after you turn the dial to check voltage, always touch the two leads together to make sure the meter doesn’t move before touching the electric wires. This is done because if something happens that causes the meter to still be on “Resistance”, then when you check the voltage, the meter or the leads could explode possibly causing an injury. I had observed the electricians in the shop doing this back when I was a janitor, and now I knew why.
Charles explained that we needed to find out why the heater in the small pump room on the northwest corner of the dumper wasn’t running. So, we went to coalyard and found the space heater mounted along the wall. We tested it to make sure it wasn’t running. After checking the circuits with the multimeter on a panel on the wall, we found that we needed to replace a small fuse block because it had become corroded from all the coal dust and moisture.
I had seen electrical he-men go up to a panel and hold a screwdriver in their hand out at arms length and unscrew screws rapidly, one at a time. Bill Rivers had been doing that up on the precipitator roof when I was working with him while I was still on the Labor Crew. He could unscrew screws from a terminal block faster than I could unwrap Hershey Kisses.
So, when Charles told me to remove the fuse block from the panel, I thought this would be an easy task. I pulled out a screwdriver from my handy dandy tool bucket and with one hand holding the screwdriver, and the other hand steadying it by holding onto the stem of the screwdriver I moved toward the panel. Charles stopped me by saying something like: “Rule number one. Never use two hands. Especially when you are working on something hot.” Ok. I see.. If one hand is touching the metal screwdriver, and I come into contact with the screw which is electrified, then… um… yeah. Ok. I dropped one hand to my side and proceeded to remove the fuse block. That other hand remained at my side for the next 18 years when working on something hot (something is hot when it has the electricity turned on).
I explained above that I was pretty uncoordinated when it came to flipping my side cutters up into the air trying to act impressive like I knew what I was doing. Well. I couldn’t hold a screwdriver steady for the life of me. I tried to match up the head of the screwdriver with the slot in the screw, but I was pretty wobbly. It was kind of embarrassing. The truth had come out. This guy can’t even hold a screwdriver still. How is he ever going to become a real electrician?
A small fuse block like this.
Using all my concentration, I fumbled about and began working the screw out of the fuse block, when suddenly the screwdriver slipped slightly and Pow! Sparks flew. I had shorted the screwdriver between the screw and the hot post on the fuse block. There was a quick flash of light and a loud pop. Geez. The first time I’m working on something, what do I do? I blew it….. literally.
Well. Charles pointed out. The electricity is off now. Go ahead and change out the fuse block, then we will find out where the source of power is for it. So, I changed it out…. Feeling a little down that my new screwdriver now had a neat little notch on the blade where the electricity had melted off a corner of my screwdriver (I carried that notched screwdriver around for the next 10 years before I replaced it). We found the breaker that had been tripped in a DP Panel (which stands for Distribution Panel) in the Dumper Air Handler room and turned it back on. We checked the heater and it was working.
At the end of the day, when Bill Bennett came down to the shop to see how my first day went, Charles told him that I had jumped right into it and already had a notch in my screwdriver to prove it. Both Bill and Charles were good-natured about it. I filled out my timecard which told a short story about my first adventure as an electrician.
As I walked to the parking lot with Bill Rivers to go home, I was thinking that even though I had been full of nerves all day, this had to be one of the most exciting days of my life. I was actually one of the electricians now. I had the feeling that somehow something was going to happen and they were going to tell me that they made a mistake and that I would have to go back to the labor crew. That was a feeling that haunted me for about 3 months after moving to the electric shop.
Comments from the original post:
-
Ron Kilman January 5, 2013
Your memory still amazes me. It’s like you kept a copy of every day’s time card. I’ll bet your time cards take up a whole room at Sooner!Great article. I still have some of the tools I was given on my first day in the Results Dept. at the Horseshoe Lake Plant in June, 1970 (don’t tell the Evil Plant Manager).
- NEO January 5, 2013
I’ve got a few screwdrivers like that myself. Goes with the territory. Good post
Coments from previous repost:
-
-
MY BROTHER NATE GOT MY DAD’S TOOLBOX—WITH ALL THE INERESTING STUFF IN IT.
-
-
Classic:
“The first time I’m working on something, what do I do? I blew it….. literally.”
I really DO need to stop by here more often.
Great writing, partner. As always…Your “Spider” post is still my favorite, but this one was awfully good.
-
The Ken and Randy Power Plant Safety Show
Originally posted March 28, 2014:
Ken Couri was the plant safety guru long before Randy Dailey showed up on April 16, 1984. Ken gave us our yearly Safety training on such things as first aid and CPR. When Randy came on the scene, our yearly safety training shifted into overdrive! Ken was the one that tested my driving when we took the Defensive Driving Course the summer of 1981 during my third summer as a summer help.
The Defensive Driving Course we took when I was a summer help
I remember that Ken climbed into the pickup truck parked outside the electric shop as I walked around to the driver side. I thought. This will be a cinch. I’m a great driver. I should come out of this with flying colors. I talked about this class in the post “Power Plant Safety is Job Number One“.
I had done my “Circle for Safety” by walking around the truck to make sure there weren’t any obstacles in the way. Which, by the way, is why AT&T trucks used to stick an orange cone at the back and front corner of their truck (maybe they still do. I haven’t noticed one lately). When an AT&T worker goes to pick up the orange cones, it forces them to look in front and behind the truck to make sure that there isn’t an obstacle behind or in front of it that they might hit when they leave the parking space.
An AT&T safety demonstration of placing cones around a truck
I thought, right off the bat, I must really be impressing Ken Couri. Ken was a heavy equipment operator from the coalyard. He was a heavy equipment operator in more ways than one. In fact, I always thought of him as a gentle giant. Anyway, I thought, he probably hadn’t seen anyone do a circle for safety as geometrically circular as I was doing it. I had calculated the radius from the center of the truck to the front bumpers, added two feet and began my circle for safety checking both the front and back of the truck for obstacles. All clear.
I climbed into the truck, and without hesitation, grabbed my seat belt and strapped myself in. Smiling, I looked over at Ken, who was looking down at his checklist, apparently not paying any attention to me. Hmmm. Ok. Maybe he would be impressed by the way I backed out of the parking space.
I always had the habit of turning around and looking behind me as I backed out. So, I did just that. I carefully backed the truck out of the space while observing everything through the back window, momentarily glancing back to the front to make sure the truck didn’t strike anything as the truck pivoted around. Confident that I had done everything right, I noticed that Ken hadn’t looked up or written anything on the checklist.
He told me where to drive, and I put the truck in drive and headed in that direction. That is when I looked up at the rear view mirror for the first time. I suddenly realized I had made a grave error. I watched as Ken’s hand that held the pencil worked its way up the sheet to a particular checkbox and marked it.
You see, while I was busy creating my perfect Circle for Safety, Ken had climbed into the pickup and reached up and knocked the rear view mirror down so that it was way out of whack. I stopped the truck for a moment as I adjusted the mirror knowing full well that I was supposed to have done that long before I had put the truck in reverse. Well, that was that. No perfect score for me, and I was just beginning the test.
I didn’t know whether to feel bad about that, or to laugh about the way that Ken just sat there with no expression on his face as he checked the box that indicated that I hadn’t checked my rear view mirror before shifting into reverse as we had learned in the videos. I think I was so ashamed about not checking my rear view mirror before shifting into reverse so much that I didn’t even tell my best friend, Tim Flowers on the way home that day. Actually I was so disappointed with myself that this is the first time I have revealed this secret failure to anyone (other than Ken Couri of course, God rest his soul).
The one thing I remember most about Ken Couri during the yearly safety meetings was that he would tell us the story about Annie, who was our CPR dummy. Annie was a drowning victim in Paris France in the Seine river. Her real identity wasn’t known, but her drowning was considered such a tragedy, because someone so lovely as her had apparently committed suicide, and no one was around to save her.
Annie of the Seine
Years later, a guy named Asmund Laerdal in Norway used her image to create the CPR mannequins known as Rescue Annie.
Rescue Annie CPR resuscitation Mannequin
I am sort of an emotional person at the weirdest times, so whenever we had to practice CPR on Annie, I would get all choked up while trying not to let my coworkers see that I was having difficulty with performing CPR on a mannequin of a real person that had died from a real drowning back in the 1800’s. The only comfort I had was knowing that, as Ken Couri pointed out and Anna Edwards said in 2011: Her enigmatic smile is known to millions around the world and she has been kissed billions of times. (Read more: http://www.dailymail.co.uk/news/article-1393184/How-girl-drowned-Paris-kissed-face-time.html#ixzz2xJxJIJNj).
Once every year we would receive First Aid training from Ken and Randy. Each time we would hear the same stories about Safety and their importance. Randy, who had been a medic in the army had a full array of sayings (maybe the Power Plant men can add a comment to the post with some of his phrases). I wish I could remember them all at the same time.
Unfortunately they only come to me when an appropriate occasion arises. Like I see some unsafe act, or a possible situation where a tragedy could happen like the ones that Randy would describe. I remember his speech about the ABCs that you perform when you run across someone that is unconscious. You first “Assess” the situation. Then you check for “Breathing”, then you check their “Circulation”. He would always end by saying that “A weak pulse is hard to find.”
He would demonstrate this by tapping the dummy on the shoulder as an example and say, “Hey. Are you all right? You don’t want to perform CPR on someone that is only taking a nap in the park.” Then he would turn to one of us and say, “Call 911!” That was called, “implementing the EMS system. EMS stood for the “Emergency Medical System”. Then he would place his ear close to the mouth of the dummy while he was checking the pulse on the neck. He would repeat, “A week pulse is hard to find.”
In the past I may have described Randy Dailey as someone that would remind you of Barney Fife from the Andy Griffith Show… Maybe I haven’t, but he sort of does sometimes. You tell me.
Barney Fife played by Don Knotts in the Andy Griffith Show
Here is Randy Dailey:
Randy Dailey, known as Mr. Safety to Real Power Plant Men
Randy may occasionally remind a novice of Barney Fife, but to the experienced Power Plant Man, just looking at him and a Power Plant Man automatically thinks “Safety”! During the “We’ve Got the Power Program” (See the post: “Power Plant “We’ve Got the Power” Program) Randy Dailey invented a special pen that you could put in your handy dandy pocket protector worn by most respectable Power Plant Men that would beep at you if you were bent over too far and were putting yourself at risk of a back injury.
Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these. Actually, I think I had one that has Castrol on it
Randy had a lot of compassion as he trained us on safety. You could tell that he had an agenda, and that was to make sure that all of us came out of the class knowing how to provide the best first aid possible to our fellow Power Plant Men as possible. When he spoke to us about dressing a wound and performing CPR on someone who had no pulse, he never cracked a joke (well, except when he showed us how to create a diaper out of the triangular bandage).
He was serious about safety, and we carried that with us when we left the class. We knew that Randy had seen the worst of the worst during his life. I remember Monday, May 8 of 1989 we had just begun our safety training course. Randy may not have been thinking about the fact that he was turning 40 that day, but for some reason I had always known his birthday.
He told us a tragic story of a 4th of July celebration that he had attended. The topic was knowing when “not to do CPR”. I think he was in Arkansas. He was sitting in the bleachers watching the celebration when suddenly something went terribly wrong. As the crowd was watching the large explosions overhead creating huge balls of red and green and blue, there was suddenly an explosion on the ground that was unexpected.
A piece of metal shot out of the area where the fireworks were being ignited and flew into the crowd. I think he said it was a young lady that was struck in the head by a metal plate that cut the top of her head completely off just above the eyebrows. Randy went on to explain that in a case like this, CPR would obviously be useless, so use your common sense when assessing your surroundings.
Each year when Randy would tell this story, I would feel this sick feeling in my stomach, and I would taste this strange taste of blood in my mouth as the corners of my mouth would go down in disgust. This was an obvious tragedy that Randy witnessed, and the feelings I had were not so much about the person that was struck as they were instantly killed. It was because behind the stalwart face of Randy, while he told this story I could see the tremendous sorrow that he felt while recounting this story to us.
I knew, and I believe we all knew, that the reason that Randy was such a great Safety instructor was because he really and truly wanted to save lives. That was his ultimate goal. He would begin his mouth-to-mouth resuscitation training by quoting from the Bible. It was from Kings 4:34. He would say that mouth-to-mouth is found in the Bible. Then he would quote word-for-word from the book about Elisha saying:
“And he went up, and lay upon the child, and put his mouth upon his mouth, and his eyes upon his eyes, and his hands upon his hands: and he stretched himself upon the child; and the flesh of the child waxed warm.”
Randy pointed out, this is Mouth-to-mouth resuscitation in the Old Testament folks! So, when a situation arises, don’t be worried about germs and the like. Do what is necessary to save a life! Again I could see his mind flashing back to some tragedy that drove Randy on to make sure we were properly trained in First Aid and CPR.
Randy didn’t teach us Safety to gain “Bonus Points” from management as some pseudo-Power Plant Men did. Randy, from the day he came to the plant in May 8, 1984 until the day I left on August 16, 2001, was a true hero to me. I don’t know if he ever served in combat. I don’t know if he ever received one little stripe or medal on his uniform in the Army. What I do know is that to this day I am eternally grateful that I have had the opportunity to meet one of the most remarkable souls of our time the day Randy Dailey showed up at the Power Plant. I have always been certain that God himself sent Randy to administer his Safety Wisdom to the Power P;ant Men at the Coal-fired Power Plant in North Central Oklahoma! Randy continued to bless all of us year after year.
Back to Plain Ol’ Power Plant Back Pain
Originally posted October 18, 2014.
Does anyone know where the phrase, “Step on a Crack, Break Your Mother’s Back” came from? I’m sure there is a story behind that one. Maybe even a lot of different origins. I can distinctly remember a day in the Power Plant when a Power Plant Man stepped on a crack and broke his own back.
I remember looking out of the seventh floor window of my friends dorm room when I was a freshman in college watching students returning from classes about 6 months before the Power Plant Man broke his back. I was watching closely to see if any of them were purposely missing the cracks as they walked down the sidewalk toward the entrance. Out of about 20 people two of them purposely stepped over every crack in the sidewalk.
In the post “Power Plant Safety is Job Number One” I told the story about four of us were carrying a very long extension ladder through the maintenance shop at the Coal-fired Power Plant in North Central Oklahoma one summer morning in 1979 when Tom Dean stepped on a crack (well, it was a cracked piece of plywood that had been placed over a floor drain because the floor grate was missing), and when as he stepped on it, he lost his balance enough to twist himself around. By the time he stopped twirling, he was in immense pain as he had destroyed any chance for comfort for the next 6 months.
A Cast Iron Floor drain cover was missing from the drain
So, I could understand the dangers of stepping on cracks even when they appear to be insignificant. What that has to do with my mom I’m not sure. However, one day when my sister was walking with my mom on the campus of Oklahoma State University, my sister may have stepped on a crack at that time, as well as my mom, which sent her plummeting the five feet to the ground resulting in a broken hip.
This makes me wonder that since the times have changed, it may be time to change the saying to something else. Maybe something like “Smoke some crack, break your parent’s piggy bank” would be more appropriate for these times. Oh well, I’ve never been much of a poet.
Anyway, back to the subject of back pain.
The number one favorite topic during Safety Meetings at the Power Plant was Back Safety. We were told (and rightly so) that accidents where the back is injured cost the company and the employee more than any other injury. Once you really hurt your back, you can expect to have back pain the rest of your life. It only takes one time. — Times may have changed since 1979, so that now you can have some excellent back surgeries to help correct your back injuries. Even with these, you will never be completely free from back pain.
In the Power Plant Post, “When Power Plant Competition Turns Terribly Safe” I told a story about how our team came up with hundreds of safety slogans in an attempt to win the coveted Power Plant Safety Award Pizza at the end of the year. A Pizza that continued to allude us for 2 and a half years. During our meetings to invent the most catchy safety slogans, Andy Tubbs (or was it Ben Davis) came up with a slogan that said, “Lift with your legs, not your back. Or you may hear a lumbar crack”. — See. I wish I could come up with doozies like that! This takes the idea of a crack and a back and turns it around, if you think about it. Now instead of a crack hurting your back, its about a strain on your back creating a crack. — I know… probably just a coincidence….
Lumbars don’t really crack. The discs indicated in blue become damaged
One morning Sonny Kendrick, our electric specialist at the time, while sitting in the electric lab during break, let out a whopper of a sneeze. When he did, he suddenly knew what it felt like to experience tremendous back pain. One sneeze and he was out of commission for many weeks.
Sonny Kendrick as he is today or… yesterday…
One day, when Charles Foster, my very close friend, and electric foreman, were talking about back pain, I realized that a good portion of Power Plant Men suffered with back pain. — At the risk of sounding like Randy Dailey teaching our Safety Class, I’m going to repeat myself, “You only have to hurt your back one time to have a lifetime of back pain.”
The company would focus a lot of their safety training around the importance of proper lifting techniques in order to prevent back accidents (not to be confused with backing accidents which is when you back out of a parking space — which is also a common accident — though usually less severe — unless you happen to be a Ford Truck). We would learn how to lift with our legs and not with our back.
You see, it wasn’t just that one sneeze that caused Sonny’s plunge into Back Pain Hell, and it wasn’t just stepping on the cracked plywood floor drain cover that broke Tom’s back (I know “Broke Back” is a misnomer since the back isn’t exactly broke). The problem is more systemic than that. This is just the final result of maybe years of neglecting your back through various unsafe activities.
The two important points I remember from watching the safety videos during our monthly safety meetings was that when you slouch while sitting, you put a needless strain on your lower back. So, by sitting with good posture, you help prevent a future of pain. The second point I remember is that you need to keep your stomach muscles strong. Strong stomach muscles take the weight off of your back when you’re just doing your regular job.
The big problem that finally causes the disc in your lumbar region of your spine to break after neglecting it through these other means is to lift a heavy object by bending over to pick it up instead of lifting the load with your legs. So, the phrase that we always heard was “Lift with your Legs. Not your Back”. You do this by bending your knees instead of just your hips.
Ok. I know you are all thinking the same thing I am thinking (right? Yeah. You are). Bending both your knees and hips saves your back. Isn’t there another word for when you bend your knees and hips at the same time? — Yeah. Yet, I don’t remember hearing it during any of our Safety Videos. — Oh. It was implied, they just never came out and said it…. What they really mean to say is, “Squat”. Yeah. “Squat”. When you bend your knees and hips, isn’t that “Squatting?”
Times have changed…. I mean….. Doesn’t everyone today have a “Squatty Potty”?
The Squatty Potty Logo
Don’t we all have “I ‘heart’ 2 Squat” tee-shirts?
See how happy you can be to Squat?
To learn more, you can watch this video:
This doesn’t just work with the Squatty Potty to help you drop your loads, it also works when lifting heavy loads. So, remember the next time you are going to bend over to pick something up…. Squat instead.
Other lifting tips include keeping the load close to your body and not holding your breath but tightening your stomach muscles, and don’t lift something too bulky by yourself. Don’t twist your body when picking something up, face the load directly. A weightlifter once told me that when you lift, feel the weight on the heel of your feet, not on the balls of your feet.
Randy Dailey, the Safety Guru of our Power Plant, and an expert machinist invented a pen that you could put in your pocket protector in your shirt pocket that would alert you by beeping if you leaned over too far. It was an ingenious device to remind you to lift with your legs instead of your back.
In one of the safety videos we watched about back safety, there was a short stalky scientist that explained the dynamics of lifting and how easy it was to put a tremendous strain on your back by leaning over and picking something up. He said that “People choose the more simple way to pick something up. Not the easiest way.”
Doesn’t that sound like the same thing? Isn’t the simplest way the easiest way? Well. You would think so, but it isn’t always the case. This Doctor of Back-ology went on to explain his statement. He explained that the simplest way to pick up an object on the floor is to bend at the hip. It is one movement. Bend at the hip. — However…. The easiest way to pick up the object is to bend both your knees and your hips to pick up the object. Since you keep your back straight and you lift with your leg muscles that are the most powerful muscles in your body. He avoided using the word, “Squat”, but that’s what he meant.
In order to reduce back injuries at the plant, the company made back belts available at the plant.
A Back Support Belt
Note that this picture not only shows a Power Plant Man wearing a Back Support Belt, but he also is wearing the right kind of Tee-Shirt. It has a vest pocket where you can put a Pocket Protector for your little screwdriver and your Back Alert Pen created by Randy Dailey.
Our Pocket Protectors were freebies given to us by vendors so they would have advertisements on them like these
The use of back belts was new around the late 1980’s. Even though we had them available through the tool room when we wanted them, few people wore them. The warehouse team wore them a lot. I suppose that is because they were lifting and moving things all day long.
In the warehouse Bob Ringwall, Darlene Mitchell and Dick Dale used to have back belts on when I would visit the warehouse to pick up a part, or to visit my friends. I don’t remember if Bud Schoonover would wear a back belt. How’s this for a slogan…. “Be a Safety Black Belt…. When Lifting, wear your Back Belt.” I know. I should stop when I’m ahead, only I’m so far behind now I may never catch up.
There was a question about whether wearing a back belt was really a good idea. It was thought that people might tend to substitute using their stomach muscles while lifting with the back belt, resulting in weaker stomach muscles. So we were cautioned not to go around wearing back belts all day long. Only when we were going to be doing a job where we had to do a lot of lifting. I suppose now, after years of research, there is a lot more data to tell us one way or the other. I haven’t heard what the latest jury has said on this subject.
Even though I titled this post “…Plain Ol’ Power Plant Back Pain”, there is nothing plain about back pain. I just thought it sounded like a catchy title.
I was lucky enough that during the 20 years I spent working at the Power Plant, I never really hurt my back. To this day, I have been able to avoid living with perpetual pain in my back. — I have been accused of causing pain in other people’s necks. Also, I don’t think the many times that people told me I was a pain in their back side, they were referring to the Lumbar region. I think they meant an area just below the tailbone. I hope that by bringing to their attention the benefits of the Squatty Potty that I have been able to relieve (or prevent) a little of that lower lumbar pain.
Now when someone says, “You don’t know Squat”, you can correct them!
Comments from the original post:
-
-
I can remember getting into a taxi whilst in my late teens, turning in the seat to sling a bag in the back seat, only to pull something in my back. The pain lasted for ages.
These days, it’s arthritis being the culprit. Back pain is as bad as everybody says it is.
Good page 🙂
-
-
Wasn’t the back alert pen given to someone in the garage to try out. Rumor is they didn’t like it because it kept going off all day every time they bent over.
Hmmmmmm
Power Plant Men 
MY BROTHER NATE GOT MY DAD’S TOOLBOX—WITH ALL THE INERESTING STUFF IN IT.