Tag Archives: Scotch-Brite

Angel of Death Passes by the Precipitator Door

Originally published on May 25, 2012:

Either this was the luckiest day of my life, or a day where stupidity seemed to be my natural state of mind. This particular day occurred sometime during September 1983. The Main Power transformer for Unit 1 had  shutdown because of an internal fault during an exceptionally hot day during the summer and was being replaced.

While the unit was offline, while I was on the labor crew, I was asked to help out the electricians who were doing an overhaul on the Precipitator. The Precipitator takes the ash out of the boiler exhaust before it goes up the smoke stack. Without it, you would see thick smoke, instead, you see only clear exhaust. At the time the electricians I worked with were Sonny Kendrick and Bill Rivers. I had already applied for a job in the electric shop and was waiting to see if I was going to be offered the job. This gave me the chance to show the electricians what a brilliant worker I was.

Bill Rivers told me to go in the precipitator and wipe down the insulators that held the wire racks in place. He showed me where they were. I wore a regular half-face respirator because the fly ash is harmful to inhale.

Half-face respirator

Just before I went in the precipitator door to begin wiping down the insulators using a Scotch Brite Pad, Bill Rivers pointed to my flashlight and said, “Don’t drop your flashlight in a hopper otherwise you will have to make sure that you get it out of the hopper before we go back online.” I told him I would be sure to hold onto my flashlight (noticing that Bill had a string tied to his flashlight which was slung over his shoulder) and I entered the precipitator door.

Yellow Flashlight similar to the one I carried

The inside of the precipitator was dark. 70 foot tall plates are lined up 9 inches apart. Wires hang down between the plates and when the precipitator is turned on, the wires are charged up to around 45,000 volts of electricity. The wires each have a 30 pound weight on the bottom to keep the wires straight, and the wires are kept apart and lined up by a rack at the bottom. One end of the rack which is about 25 feet long is held in place by an electrical insulator about 3 feet long. This is what I was supposed to clean. The light from the flashlight lit up the area around me because everything was covered with the fine white powder reflecting the light.

The first hopper I came to was full of ash up to the top of the hopper, but just below where the insulator was mounted to the edge of the hopper. So, I worked my way down to the ledge along the edge of the hopper and dangled my feet down into the ash as I prepared to wipe down the first of the four insulators on this particular hopper. Just as I began, the precipitator suddenly went dark as my flashlight fell from my hand and down into the hopper. — Oh boy, that didn’t take long.

Fly Ash Hoppers. Our hoppers were 12 foot by 12 foot at the top.

I sat there for a minute in the dark as my eyes grew accustomed to the small amount of light that was coming through the doors. After I could see again, I reached my hand into the ash to feel for my flashlight. The ash was very fluffy and there was little or no resistance as I flailed my hand around searching for it. I leaned over farther and farther to reach down deeper into the ash. I was at the point where I was laying down flat on the ledge trying to find the flashlight, and it was no where to be found.

I pulled myself over to the side edge of the hopper and dropped myself down into the ash so that I could reach over where I had dropped the light, but I was still not able to find it. At that point, I was leaning out into the hopper with only my one index finger gripping the ledge around the hopper (read that again…. one index finger was holding me up). I had a decision to make… I thought I would just bail off into the ash to see if I could find the flashlight, or I could give up and go tell Bill Rivers that I had done the one thing that he told me not to do, and in record time.

I don’t usually like to give up until I have exhausted every effort, so here was my dilemma. Do I let go and dive into this ash to retrieve my flashlight? Or do I leave the hopper and go tell Bill? I regretfully decided to go tell Bill. So, I climbed up out of the hopper, with my clothes covered with Ash (as we did not have fly ash suits at the time and I was wearing my coveralls). I made my way to the precipitator door and once I was outside, I determined which hopper I had been in when I dropped my flashlight.

I found Bill and told him that I had dropped my flashlight in a hopper full of ash. He told me to get the key for that hopper and open the door at the bottom and see if I could find the flashlight. Unlike the picture of the hoppers above, we had a landing around the base of the hoppers by the access door so you didn’t need a ladder to reach them.

Curtis Love had been watching the door of the precipitator for me while I was supposed to be wiping off the insulators. He came down with me, and we proceeded to open the access door at the bottom on the side of the hopper. When I opened the door both Curtis and I were swept backward as a stream of fly ash shot from the door. The ash fell through the grating to the ground below. We regained our footing and watched as a tremendous pile of ash grew below us. If the flashlight had come out of the doorway, it would have remained on the landing since it was too big to go through the grating, but it never came out.

After the ash had finished pouring out of the hopper as if it were water, I reached down into the remaining ash in the hopper to see if I could feel the flashlight. Still I was unable to find it. There was about 4 more feet from the doorway to the bottom of the hopper, so I emptied out as much ash as I could using my hard hat for a shovel. Then I pulled my body head first into the hopper and I reached down as far as I could in the bottom of the hopper, but I couldn’t find the flashlight.

So, in my infinite wisdom, I asked Curtis Love to hold onto my legs as I lowered myself down to the throat at the bottom of the hopper. I lowered myself down until I had half of my face laying in the ash. At this point only one of the two filters on my respirator was able to function as the other one was down in the ash. I reached my hand into the top of the feeder at the bottom of the hopper and with my finger tips I could just feel the flashlight. I had reached as far as I could, but I couldn’t reach far enough to grip the flashlight.

All of the sudden my head dipped down into the ash and my hand went around the flashlight. I was not able to breathe as my respirator (and my entire head) was entirely immersed in ash. Everything went dark. I struggled to get up, as Curtis had let go of my legs and I had plunged head first into the bottom of the hopper.

I had one hand free as the other one held the flashlight. I used it to push against the opposite wall of the hopper to raise my head up out of the ash. I still couldn’t breathe as my respirator was now clogged solid with ash. When I tried to inhale, the respirator just gripped my face tighter. Finally with my one free hand pushing against the hopper wall to hold my head out of the ash, I reached up with the hand that held the flashlight and pushed against my respirator enough to break the seal around my face so that I was able to get a breath of air.

Then I quickly pulled myself out of the precipitator as I heard Curtis saying the mantra that I had heard one other time (as I indicated in the post about Power Plant Safety as Interpreted by Curtis Love). He was saying over and over again, “I’mSorry,I’mSorry, KevinI’mSorry, ThoseGuysWereTicklingMe. I’mSorry,IDidn’tMeanToLetGo,ITriedToHoldOn, butThoseGuysWereTicklingMe.”

Looking around I spied a few Labor Crew hands sneaking away. As this happened before when I was sandblasting in the sand filter tank when Curtis Love had turned off my air, this wasn’t the first encounter I had with Power Plant Men In-Training playing a Power Plant joke on me. I told Curtis to forget it. I had retrieved my flashlight and everything was all right. I was covered from head-to-toe with fly ash, but that washes off pretty easily.

It dawned on me then that when I had dropped the flashlight, it had sunk clear to the bottom of the hopper and down into the throat of the feeder at the bottom. If I had dived into the ash in the hopper from up above, I would have fallen right down to the bottom of the hopper and been engulfed in ash. My feet would have been pinned down in the feeder pipe, and that would have been the end of me. It probably would have taken many hours to figure out where I was, and they would have found only a corpse.

While I was hanging on the edge of the hopper with only the tip of my index finger gripping the ledge, I was actually considering letting go. There never would have been an electrician at the power Plant named Kevin Breazile. I never would have married my wife Kelly, and had my two children Elizabeth and Anthony. I would not be writing this story right now. If it had been left to my own stupidity, none of those things would have happened.

I believe it was my guardian angel that had talked me out of letting go (or had actually been standing on my finger). As stubborn as I was, and against my nature, that day I had decided to give up searching for my flashlight and seek help. That one momentary decision has made all the difference in my life.

Since that day I have had a certain appreciation for the things that happen to me even when they seem difficult at the time. I have lived a fairly stress-free life because each day is a gift. Currently I work in a stress-filled job where individual accomplishments are seldom rewarded. From one day to the next I may be laid off at any time. I still find a lot of satisfaction in what I do because it was possible that it never would have happened. I have been kept alive for a purpose so I might as well enjoy the ride.

I find a special love for the people I work with today, because they are all gifts to me. I try to pay them back with kindness… when that doesn’t work.. I try to annoy them with my presence… Just to say….. — I am still here!

Comments from previous repost:

  1. Dan Antion May 27, 2014

    Scary thought there at the end. Sounds like quick sand.

  2. Ron May 27, 2014

    I’m glad you chose to “give up” on going after a flashlight! There is a Proverb that says “There is a way which seems right to a man, but the end thereof is the way death.” Sounds like you found one of those “ways”. To choose to find your flashlight and lose your life would be the ultimate bad choice. God, give us the wisdom to choose the way of life.

  3. A.D. Everard August 4, 2014

    Wow. So close! You have a book with all these adventures, you really do. I’m enjoying reading these pages very much. I’m so glad you survived to write them!

  4. inmytwisteddreams August 17, 2014

    You are a very good story teller! I was drawn in from the first sentence, and engulfed in your words until the last. Great Story! I mean, not so great at the time, but glad you brought it full circle in the end! I always say, “You must never hesitate” – a simple statement, whose words most might take for granted. As humans, it’s typically against our nature to trust our first (or gut) instinct, but as you know, it is there for a reason! Good story! 🙂

    ~Nikki

Pioneers of Power Plant Fame Finally Find Peace

originally posted on June 30, 2012:

Somewhere today there is a young man named Cameron Powell whose grandmother has recently died and who has a Great Grandmother named Dolores. A kind and gentle lady. If this young man were able to ask his great grandmother about his great grandfather he would hear the tale about a peaceful and kind man that made those who worked with him smile and enjoy their day. He lived his life in love with Dolores and his daughter and the very people that he worked with each day. All you had to do was walk in the same room as Howard Chumbley and a smile would come across your face instantly.

You see. While I was in my first years as a summer help at the Coal Fired Power Plant learning from the True Power Plant men of my day, 15 miles north of the plant along the Arkansas River was another plant. This plant was being operated by the Power Plant Pioneers of an earlier time. While we had the latest technological advancements that were available in 1974 when our plant was designed, the Osage plant was using old mechanical instruments that measured actual pressures and temperatures. What this meant was that when the pressure gauge registered 1000 pounds of pressure, it was because the pipe that was connected to the back or bottom of the gauge had 1000 lbs of pressure on it. I don’t know. They may have had a regulator on there that cut the pressure down to a safer range. That would seem crazy to anyone today to think that behind the Control Panel in the Control Room were pipes that ran from different steam pipes all over the plant to the gauges on the Control board, so that the Control Room operators could operate the plant correctly.

The Power Plant Men that worked in these early Generating Stations were subjected to dangerous chemicals and conditions though it was the best they knew at the time. Asbestos insulation covered the steam pipes. Turbine oil with PCBs were used to clean their tools.

Howard Chumbley explained to me one day that they used to wash their tools in Turbine oil up to their elbows in what was now known to contain the dangerous chemical PCB (Polychlorinated Biphenyls). A funny fact I found out later was that there was a temperature probe in the river just downstream from the plant taking the temperature of the water just like Sooner Plant (See the Post about Power Plant Men Taking the Temperature Down by the River).

When the old Osage Plant closed in the early 1980s, that was when I first learned about it. This was because some of the pioneer power plant men came to work at our plant. Howard Chumbley became an Electrical foreman and Gilbert Schwarz came to our plant as the superintendent of operations. Two gray haired men, both with a kind of slow peaceful look on their face. Howard had a smaller build with soft wavy gray hair. He could have been a professor at Harvard if you put a pipe in his mouth and a turtleneck sweater. Of course, that would not have been fitting for Howard. Gilbert was tall and had the look of a cowboy or a farm hand. I understand that he enjoyed working on the farm.

One year after I became an electrician in November 1984, Howard Chumbley became my foreman. It was less than a year after that when Howard retired. During the short time he was my foreman we took a trip up to the Osage Plant. It was named Osage because the Osage Indian Nation Territorial boundary is directly across the river from the plant. The plant itself actually sat adjacent to the Ponca Indian Tribe just outside of Ponca City. The day we went to the plant, Diana Lucas (later Diana Brien). a Power Plant Electrician and I loaded a special hazardous material containment barrel into the truck and I was given a special suit that I was to wear that would cover me from head to toe while I cleaned up a PCB spill. A smaller plant transformer had been removed from the old plant and there had been a slow leak under it that left a tar like substance on the concrete where the transformer had stood. As Howard, Diana and I approached the plant and I spied it for the first time. This is what I saw:

The old Osage Power Plant

As we drove closer I had a better look at the plant as we drove around the other side:

A closer view of the Osage Plant

It was definitely an old abandoned power plant. We took the barrel out of the back of the truck and hauled it inside on a two wheel dolly (or two-wheel hand truck, as it is often called). When we entered the abandoned plant we walked across the turbine room floor:

The stripped down Turbine Room floor of the Osage Power Plant

I could see where equipment used to stand that had been sold for scrap or stolen by vandals.

When we arrived at the oil spill I was surprised by how small of a spot it was. It couldn’t have been more than one square foot. I put on the rubber suit with it’s rubber hat, rubber boots and a full face respirator and rubber gloves. I took a putty knife and scraped up the tar-like substance and placed it in special bag that had a special seal on it.

When I had scraped up the thick stuff, I poured trichloroethane 1.1.1 solvent (which is no longer used due to the dangerous fumes that damages your liver) on the spot and scrubbed it with a wire brush. Then I took a Scotch Brite pad and scrubbed the floor until the spot was much cleaner than the concrete around it. Everything I had used went into the special barrel. The bags of tar, the Scotch Brite pad, the wire brush the putty knife and the rags I had used to wipe everything up. Then as I took off my suit, every piece of the rubber suit including the full face respirator went into the barrel. Once everything was in the barrel, the special lid was placed on top and it was bolted shut. A Hazardous Waste sticker was placed on the barrel and the time and date and what was in the container was written on it.

Hazardous Waste Barrel

We took the barrel back to the plant and it was placed in a hazardous waste Conex Box that was later buried when it was full of different types of hazardous waste from all over Oklahoma.

A Conex Box

A few years after Howard Chumbley retired, so did Gilbert Schwartz. Gilbert was the Superintendent over the Operators so I didn’t work around Gilbert and I knew very little about him. However, later when I was married and living in Ponca City, I would see him at the Catholic Church in Ponca City where he was a member of the Knights of Columbus. He would nod and say hi whenever he saw me.

Both Howard and Gilbert were in the military. I know that Howard Chumbley was in the Navy during World War II and that Gilbert Schwarz was in the Korean War. Growing up I noticed that older men that had served in the armed forces seemed to have light gray hair. Especially if they had been in the Navy. I don’t know if it’s just a coincidence. Aubrey Cargill was that way also (See the post about Painting Lessons with Aubrey Cargill).

In 1998, Howard Chumbley died unexpectedly when he was admitted to the hospital in Ponca City with a broken arm. The hospital in Ponca City had a bad reputation (or Mortality Rate, as some might say). People didn’t want to go there if there was anyway to avoid it. The hospital in Stillwater was the preferred hospital in this area of Oklahoma.

I only met Dolores Chumbley on two occasions and they were both at Christmas or Award banquets. She seemed the perfect spouse for Howard as she appeared kind and peaceful as well. I’m sure they had a happy life together. I do not have a picture of Howard. I wish I did. His demeanor reminds me of my Mother-In-Law. We have a picture of her in our hallway and the words below the picture says: “Be Kind”. I would say that this is what Howard was all about. Everything about Howard was kindness. I am honored to have known him.

Here Lies Howard Chumbley

This past week on June 24, 2012 Gilbert Schwarz died at the age of 83. He lived a long and happy life as did Howard. There was something about these Power Plant Pioneers that gave them a strange sort of peace.

A Power Plant Pioneer – Gilbert Schwarz

I never found the source of this peace for sure. I suppose it was their long and happy marriages with their loving and supportive wives. Howard had a daughter that he was always very proud to discuss. She was a teacher somewhere close to Tulsa. She recently died of Cancer on January 4. That was 2 days after I wrote my first Power Plant Man post (Why Santa Visits Power Plant Men) at the beginning of this year.

Gilbert never had a child of his own, but his nieces and nephews meant a lot to him throughout his life and he was active in their lives as they grew up. I suppose if the Power Plant Pioneers were anything like the True Power Plant Men of my day, then they found a lot of peace in the friendships that they had with their fellow Power Plant Men locked away behind the Main Gate that they had to drive through each day on the way to work. Once you drive through that gate and enter into the Power Plant Kingdom, there is a certain peace that you feel knowing that what you will do that day will directly affect the lives of millions of people in the state of Oklahoma.

These Pioneers of the early days willingly put themselves at risk working around equipment that did not have the safeties and guards that we have today to supply the electricity to the State. I don’t know if there are a few of these brave Pioneers left from the Osage Plant. Gilbert was the last of the older men that I knew about. If you happen to find one of these men some day, don’t miss the opportunity to talk to him. I am sure they would be proud to tell you of the days that they spent being Pioneers of the Power Plant World. You should be able to recognize them. You can pick them out in a crowd. They are the mild peaceful looking old men treating the people around them with respect.

Comments from Previous Post:

  1. Ron Kilman July 3, 2013:

    Thanks! I had not heard of Gilbert’s passing.
    Yes, the old plants had full pressures to the gauges in the control room (throttle, extractions, reheat (if any), even condenser vacuum). The funniest “gauge” I ever saw was at the Byng Power Plant (north of Ada). It was the plant MW output “gauge”. When the control room operator changed load, he would move the dial on the “gauge” (with his hand) and ring a buzzer. The men firing the boilers would hear the buzzer, look through the glass window at the new plant MW output, and change the firing rate on the boilers accordingly!

    1. Plant Electrician July 3, 2013:

      That’s a great story about the MW output gauge! This reminds me of the throttle control on large older ships. The round thing with the handle that the captain would turn to change the speed of the ship. This actually called an “Engine Order Telegraph” that rings a bell when the setting is changed so the Engine room knows to look at the new setting and then does what it takes to make the ship go faster or slower, or even to change from forward to reverse. In the movies it looks like it just happens automatically.

Angel of Death Passes by the Precipitator Door

Originally published on May 25, 2012:

Either this was the luckiest day of my life, or a day where stupidity seemed to be my natural state of mind. This particular day occurred sometime during September 1983. The Main Power transformer for Unit 1 had  shutdown because of an internal fault during an exceptionally hot day during the summer and was being replaced.

While the unit was offline, while I was on the labor crew, I was asked to help out the electricians who were doing an overhaul on the Precipitator. The Precipitator takes the ash out of the boiler exhaust before it goes up the smoke stack. Without it, you would see thick smoke, instead, you see only clear exhaust. At the time the electricians I worked with were Sonny Kendrick and Bill Rivers. I had already applied for a job in the electric shop and was waiting to see if I was going to be offered the job. This gave me the chance to show the electricians what a brilliant worker I was.

Bill Rivers told me to go in the precipitator and wipe down the insulators that held the wire racks in place. He showed me where they were. I wore a regular half-face respirator because the fly ash is harmful to inhale.

Half-face respirator

Just before I went in the precipitator door to begin wiping down the insulators using a Scotch Brite Pad, Bill Rivers pointed to my flashlight and said, “Don’t drop your flashlight in a hopper otherwise you will have to make sure that you get it out of the hopper before we go back online.” I told him I would be sure to hold onto my flashlight (noticing that Bill had a string tied to his flashlight which was slung over his shoulder) and I entered the precipitator door.

Yellow Flashlight similar to the one I carried

The inside of the precipitator was dark. 70 foot tall plates are lined up 9 inches apart. Wires hang down between the plates and when the precipitator is turned on, the wires are charged up to around 45,000 volts of electricity. The wires each have a 30 pound weight on the bottom to keep the wires straight, and the wires are kept apart and lined up by a rack at the bottom. One end of the rack which is about 25 feet long is held in place by an electrical insulator about 3 feet long. This is what I was supposed to clean. The light from the flashlight lit up the area around me because everything was covered with the fine white powder reflecting the light.

The first hopper I came to was full of ash up to the top of the hopper, but just below where the insulator was mounted to the edge of the hopper. So, I worked my way down to the ledge along the edge of the hopper and dangled my feet down into the ash as I prepared to wipe down the first of the four insulators on this particular hopper. Just as I began, the precipitator suddenly went dark as my flashlight fell from my hand and down into the hopper. — Oh boy, that didn’t take long.

Fly Ash Hoppers. Our hoppers were 12 foot by 12 foot at the top.

I sat there for a minute in the dark as my eyes grew accustomed to the small amount of light that was coming through the doors. After I could see again, I reached my hand into the ash to feel for my flashlight. The ash was very fluffy and there was little or no resistance as I flailed my hand around searching for it. I leaned over farther and farther to reach down deeper into the ash. I was at the point where I was laying down flat on the ledge trying to find the flashlight, and it was no where to be found.

I pulled myself over to the side edge of the hopper and dropped myself down into the ash so that I could reach over where I had dropped the light, but I was still not able to find it. At that point, I was leaning out into the hopper with only my one index finger gripping the ledge around the hopper. I had a decision to make… I thought I would just bail off into the ash to see if I could find the flashlight, or I could give up and go tell Bill Rivers that I had done the one thing that he told me not to do, and in record time.

I don’t usually like to give up until I have exhausted every effort, so here was my dilemma. Do I let go and dive into this ash to retrieve my flashlight? Or do I leave the hopper and go tell Bill? I regretfully decided to go tell Bill. So, I climbed up out of the hopper, with my clothes covered with Ash (as we did not have fly ash suits at the time and I was wearing my coveralls). I made my way to the precipitator door and once I was outside, I determined which hopper I had been in when I dropped my flashlight.

I found Bill and told him that I had dropped my flashlight in a hopper full of ash. He told me to get the key for that hopper and open the door at the bottom and see if I could find the flashlight. Unlike the picture of the hoppers above, we had a landing around the base of the hoppers by the access door so you didn’t need a ladder to reach them.

Curtis Love had been watching the door of the precipitator for me while I was supposed to be wiping off the insulators. He came down with me, and we proceeded to open the access door at the bottom on the side of the hopper. When I opened the door both Curtis and I were swept backward as a stream of fly ash shot from the door. The ash fell through the grating to the ground below. We regained our footing and watched as a tremendous pile of ash grew below us. If the flashlight had come out of the doorway, it would have remained on the landing since it was too big to go through the grating, but it never came out.

After the ash had finished pouring out of the hopper as if it were water, I reached down into the remaining ash to see if I could feel the flashlight. Still I was unable to find it. There was about 4 more feet from the doorway to the bottom of the hopper, so I emptied out as much ash as I could using my hard hat for a shovel. Then I pulled my body head first into the hopper and I reached down as far as I could in the bottom of the hopper, but I couldn’t find the flashlight.

So, in my infinite wisdom, I asked Curtis Love to hold onto my legs as I lowered myself down to the throat at the bottom of the hopper. I lowered myself down until I had half of my face laying in the ash. At this point only one of the two filters on my respirator was able to function as the other one was down in the ash. I reached my hand into the top of the feeder at the bottom of the hopper and with my finger tips I could just feel the flashlight. I had reached as far as I could, but I couldn’t reach far enough to grip the flashlight.

All of the sudden my head dipped down into the ash and my hand went around the flashlight. I was not able to breathe as my respirator (and my entire head) was entirely immersed in ash. Everything went dark. I struggled to get up, as Curtis had let go of my legs and I had plunged head first into the bottom of the hopper. I had one hand free as the other one held the flashlight. I used it to push against the opposite wall of the hopper to raise my head up out of the ash. I still couldn’t breathe as my respirator was now clogged solid with ash. When I tried to inhale, the respirator just gripped my face tighter. Finally with my one free hand pushing against the hopper wall to hold my head out of the ash, I reached up with the hand that held the flashlight and pushed against my respirator enough to break the seal around my face so that I was able to get a breath of air.

Then I quickly pulled myself out of the precipitator as I heard Curtis saying the mantra that I had heard one other time (as I indicated in the post about Power Plant Safety as Interpreted by Curtis Love). He was saying over and over again, “I’mSorry,I’mSorry, KevinI’mSorry, ThoseGuysWereTicklingMe. I’mSorry,IDidn’tMeanToLetGo,ITriedToHoldOn, butThoseGuysWereTicklingMe.”

Looking around I spied a few Labor Crew hands sneaking away. As this happened before when I was sandblasting in the sand filter tank when Curtis Love had turned off my air, this wasn’t the first encounter I had with Power Plant Men In-Training playing a Power Plant joke on me. I told Curtis to forget it. I had retrieved my flashlight and everything was all right. I was covered from head-to-toe with fly ash, but that washes off pretty easily.

It dawned on me then that when I had dropped the flashlight, it had sunk clear to the bottom of the hopper and down into the throat of the feeder at the bottom. If I had dived into the ash in the hopper from up above, I would have fallen right down to the bottom of the hopper and been engulfed in ash. My feet would have been pinned down in the feeder pipe, and that would have been the end of me. It probably would have taken many hours to figure out where I was, and they would have found only a corpse.

While I was hanging on the edge of the hopper with only the tip of my index finger gripping the ledge, I was actually considering letting go. There never would have been an electrician at the power Plant named Kevin Breazile. I never would have married my wife Kelly, and had my two children Elizabeth and Anthony. I would not be writing this story right now. If it had been left to my own stupidity, none of those things would have happened.

I believe it was my guardian angel that had talked me out of letting go (or had actually been standing on my finger). As stubborn as I was, and against my nature, that day I had decided to give up searching for my flashlight and seek help. That one momentary decision has made all the difference in my life.

Since that day I have had a certain appreciation for the things that happen to me even when they seem difficult at the time. I have lived a fairly stress-free life because each day is a gift. Currently I work in a stress-filled job where individual accomplishments are seldom rewarded. From one day to the next I may be laid off at any time. I still find a lot of satisfaction in what I do because it was possible that it never would have happened. I have been kept alive for a purpose so I might as well enjoy the ride.

I find a special love for the people I work with today, because they are all gifts to me. I try to pay them back with kindness… when that doesn’t work.. I try to annoy them with my presence… Just to say….. — I am still here!

Comments from previous repost:

  1. Dan Antion May 27, 2014

    Scary thought there at the end. Sounds like quick sand.

  2. Ron May 27, 2014

    I’m glad you chose to “give up” on going after a flashlight! There is a Proverb that says “There is a way which seems right to a man, but the end thereof is the way death.” Sounds like you found one of those “ways”. To choose to find your flashlight and lose your life would be the ultimate bad choice. God, give us the wisdom to choose the way of life.

  3. A.D. Everard August 4, 2014

    Wow. So close! You have a book with all these adventures, you really do. I’m enjoying reading these pages very much. I’m so glad you survived to write them!

  4. inmytwisteddreams August 17, 2014

    You are a very good story teller! I was drawn in from the first sentence, and engulfed in your words until the last. Great Story! I mean, not so great at the time, but glad you brought it full circle in the end! I always say, “You must never hesitate” – a simple statement, whose words most might take for granted. As humans, it’s typically against our nature to trust our first (or gut) instinct, but as you know, it is there for a reason! Good story! 🙂

    ~Nikki

Pioneers of Power Plant Fame Finally Find Peace

originally posted on June 30, 2012:

Somewhere today there is a young man named Cameron Powell whose grandmother has recently died and who has a Great Grandmother named Dolores. A kind and gentle lady. If this young man were able to ask his great grandmother about his great grandfather he would hear the tale about a peaceful and kind man that made those who worked with him smile and enjoy their day. He lived his life in love with Dolores and his daughter and the very people that he worked with each day. All you had to do was walk in the same room as Howard Chumbley and a smile would come across your face instantly.

You see. While I was in my first years as a summer help at the Coal Fired Power Plant learning from the True Power Plant men of my day, 15 miles north of the plant along the Arkansas River was another plant. This plant was being operated by the Power Plant Pioneers of an earlier time. While we had the latest technological advancements that were available in 1974 when our plant was designed, the Osage plant was using old mechanical instruments that measured actual pressures and temperatures. What this meant was that when the pressure gauge registered 1000 pounds of pressure, it was because the pipe that was connected to the back or bottom of the gauge had 1000 lbs of pressure on it. I don’t know. They may have had a regulator on there that cut the pressure down to a safer range. That would seem crazy to anyone today to think that behind the Control Panel in the Control Room were pipes that ran from different steam pipes all over the plant to the gauges on the Control board, so that the Control Room operators could operate the plant correctly.

The Power Plant Men that worked in these early Generating Stations were subjected to dangerous chemicals and conditions though it was the best they knew at the time. Asbestos insulation covered the steam pipes. Turbine oil with PCBs were used to clean their tools. Howard Chumbley explained to me one day that they used to wash their tools in Turbine oil up to their elbows in what was now known to contain the dangerous chemical PCB (Polychlorinated Biphenyls). A funny fact I found out later was that there was a temperature probe in the river just downstream from the plant taking the temperature of the water just like Sooner Plant (See the Post about Power Plant Men Taking the Temperature Down by the River).

When the old Osage Plant closed in the early 1980s, that was when I first learned about it. This was because some of the pioneer power plant men came to work at our plant. Howard Chumbley became an Electical foreman and Gilbert Schwarz came to our plant as the superintendent of operations. Two gray haired men, both with a kind of slow peaceful look on their face. Howard had a smaller build with soft wavy gray hair. He could have been a professor at Harvard if you put a pipe in his mouth and a turtleneck sweater. Of course, that would not have been fitting for Howard. Gilbert was tall and had the look of a cowboy or a farm hand. I understand that he enjoyed working on the farm.

One year after I became an electrician in November 1984, Howard Chumbley became my foreman. It was less than a year after that when Howard retired. During the short time he was my foreman we took a trip up to the Osage Plant. It was named Osage because the Osage Indian Nation Territorial boundary is directly across the river from the plant. The plant itself actually sat adjacent to the Ponca Indian Tribe just outside of Ponca City. The day we went to the plant, Diana Lucas (later Diana Brien). a Power Plant Electrician and I loaded a special hazardous material containment barrel into the truck and I was given a special suit that I was to wear that would cover me from head to toe while I cleaned up a PCB spill. A smaller plant transformer had been removed from the old plant and there had been a slow leak under it that left a tar like substance on the concrete where the transformer had stood. As Howard, Diana and I approached the plant and I spied it for the first time. This is what I saw:

The old Osage Power Plant

As we drove closer I had a better look at the plant as we drove around the other side:

A closer view of the Osage Plant

It was definitely an old abandoned power plant. We took the barrel out of the back of the truck and hauled it inside on a two wheel dolly (or two-wheel hand truck, as it is often called). When we entered the abandoned plant we walked across the turbine room floor:

The stripped down Turbine Room floor of the Osage Power Plant

I could see where equipment used to stand that had been sold for scrap or stolen by vandals.

When we arrived at the oil spill I was surprised by how small of a spot it was. It couldn’t have been more than one square foot. I put on the rubber suit with it’s rubber hat, rubber boots and a full face respirator and rubber gloves. I took a putty knife and scraped up the tar-like substance and placed it in special bag that had a special seal on it.

When I had scraped up the thick stuff, I poured trichloroethane 1.1.1 solvent (which is no longer used due to the dangerous fumes that damages your liver) on the spot and scrubbed it with a wire brush. Then I took a Scotch Brite pad and scrubbed the floor until the spot was much cleaner than the concrete around it. Everything I had used went into the special barrel. The bags of tar, the Scotch Brite pad, the wire brush the putty knife and the rags I had used to wipe everything up. Then as I took off my suit, every piece of the rubber suit including the full face respirator went into the barrel. Once everything was in the barrel, the special lid was placed on top and it was bolted shut. A Hazardous Waste sticker was placed on the barrel and the time and date and what was in the container was written on it.

Hazardous Waste Barrel

We took the barrel back to the plant and it was placed in a hazardous waste Conex Box that was later buried when it was full of different types of hazardous waste from all over Oklahoma.

A Conex Box

A few years after Howard Chumbley retired, so did Gilbert Schwartz. Gilbert was the Superintendent over the Operators so I didn’t work around Gilbert and I knew very little about him. However, later when I was married and living in Ponca City, I would see him at the Catholic Church in Ponca City where he was a member of the Knights of Columbus. He would nod and say hi whenever he saw me.

Both Howard and Gilbert were in the military. I know that Howard Chumbley was in the Navy during World War II and that Gilbert Schwarz was in the Korean War. Growing up I noticed that older men that had served in the armed forces seemed to have light gray hair. Especially if they had been in the Navy. I don’t know if it’s just a coincidence. Aubrey Cargill was that way also (See the post about Painting Lessons with Aubrey Cargill).

In 1998, Howard Chumbley died unexpectedly when he was admitted to the hospital in Ponca City with a broken arm. The hospital in Ponca City had a bad reputation (or Mortality Rate, as some might say). People didn’t want to go there if there was anyway to avoid it. The hospital in Stillwater was the preferred hospital in this area of Oklahoma.

I only met Dolores Chumbley on two occasions and they were both at Christmas or Award banquets. She seemed the perfect spouse for Howard as she appeared kind and peaceful as well. I’m sure they had a happy life together. I do not have a picture of Howard. I wish I did. His demeanor reminds me of my Mother-In-Law. We have a picture of her in our hallway and the words below the picture says: “Be Kind”. I would say that this is what Howard was all about. Everything about Howard was kindness. I was glad to have known him.

Here Lies Howard Chumbley

This past week on June 24, 2012 Gilbert Schwarz died at the age of 83. He lived a long and happy life as did Howard. There was something about these Power Plant Pioneers that gave them a strange sort of peace.

A Power Plant Pioneer – Gilbert Schwarz

I never found the source of this peace for sure. I suppose it was their long and happy marriages with their loving and supportive wives. Howard had a daughter that he was always very proud to discuss. She was a teacher somewhere close to Tulsa. She recently died of Cancer on January 4. That was 2 days after I wrote my first Power Plant Man post (Why Santa Visits Power Plant Men) at the beginning of this year.

Gilbert never had a child of his own, but his nieces and nephews meant a lot to him throughout his life and he was active in their lives as they grew up. I suppose if the Power Plant Pioneers were anything like the True Power Plant Men of my day, then they found a lot of peace in the friendships that they had with their fellow Power Plant Men locked away behind the Main Gate that they had to drive through each day on the way to work. Once you drive through that gate and enter into the Power Plant Kingdom, there is a certain peace that you feel knowing that what you will do that day will directly affect the lives of millions of people in the state of Oklahoma.

These Pioneers of the early days willingly put themselves at risk working around equipment that did not have the safeties and guards that we have today to supply the electricity to the State. I don’t know if there are a few of these brave Pioneers left from the Osage Plant. Gilbert was the last of the older men that I knew about. If you happen to find one of these men some day, don’t miss the opportunity to talk to him. I am sure they would be proud to tell you of the days that they spent being Pioneers of the Power Plant World. You should be able to recognize them. You can pick them out in a crowd. They are the mild peaceful looking old men treating the people around them with respect.

Comments from Previous Post:

  1. Ron Kilman July 3, 2013:

    Thanks! I had not heard of Gilbert’s passing.
    Yes, the old plants had full pressures to the gauges in the control room (throttle, extractions, reheat (if any), even condenser vacuum). The funniest “gauge” I ever saw was at the Byng Power Plant (north of Ada). It was the plant MW output “gauge”. When the control room operator changed load, he would move the dial on the “gauge” (with his hand) and ring a buzzer. The men firing the boilers would hear the buzzer, look through the glass window at the new plant MW output, and change the firing rate on the boilers accordingly!

    1. Plant Electrician July 3, 2013:

      That’s a great story about the MW output gauge! This reminds me of the throttle control on large older ships. The round thing with the handle that the captain would turn to change the speed of the ship. This actually called an “Engine Order Telegraph” that rings a bell when the setting is changed so the Engine room knows to look at the new setting and then does what it takes to make the ship go faster or slower, or even to change from forward to reverse. In the movies it looks like it just happens automatically.

Pioneers of Power Plant Fame Finally Find Peace

originally posted on June 30, 2012:

Somewhere today there is a young man named Cameron Powell whose grandmother has recently died and who has a Great Grandmother named Dolores. A kind and gentle lady. If this young man were able to ask his great grandmother about his great grandfather he would hear the tale about a peaceful and kind man that made those who worked with him smile and enjoy their day. He lived his life in love with Dolores and his daughter and the very people that he worked with each day. All you had to do was walk in the same room as Howard Chumbley and a smile would come across your face instantly.

You see. While I was in my first years as a summer help at the Coal Fired Power Plant learning from the True Power Plant men of my day, 15 miles north of the plant along the Arkansas River was another plant. This plant was being operated by the Power Plant Pioneers of an earlier time. While we had the latest technological advancements that were available in 1974 when our plant was designed, the Osage plant was using old mechanical instruments that measured actual pressures and temperatures. What this meant was that when the pressure gauge registered 1000 pounds of pressure, it was because the pipe that was connected to the back or bottom of the gauge had 1000 lbs of pressure on it. I don’t know. They may have had a regulator on there that cut the pressure down to a safer range. That would seem crazy to anyone today to think that behind the Control Panel in the Control Room were pipes that ran from different steam pipes all over the plant to the gauges on the Control board, so that the Control Room operators could operate the plant correctly.

The Power Plant Men that worked in these early Generating Stations were subjected to dangerous chemicals and conditions though it was the best they knew at the time. Asbestos insulation covered the steam pipes. Turbine oil with PCBs were used to clean their tools. Howard Chumbley explained to me one day that they used to wash their tools in Turbine oil up to their elbows in what was now known to contain the dangerous chemical PCB (Polychlorinated Biphenyls). A funny fact I found out later was that there was a temperature probe in the river just downstream from the plant taking the temperature of the water just like Sooner Plant (See the Post about Power Plant Men Taking the Temperature Down by the River).

When the old Osage Plant closed in the early 1980s, that was when I first learned about it. This was because some of the pioneer power plant men came to work at our plant. Howard Chumbley became an Electical foreman and Gilbert Schwarz came to our plant as the superintendent of operations. Two gray haired men, both with a kind of slow peaceful look on their face. Howard had a smaller build with soft wavy gray hair. He could have been a professor at Harvard if you put a pipe in his mouth and a turtleneck sweater. Of course, that would not have been fitting for Howard. Gilbert was tall and had the look of a cowboy or a farm hand. I understand that he enjoyed working on the farm.

One year after I became an electrician in November 1984, Howard Chumbley became my foreman. It was less than a year after that when Howard retired. During the short time he was my foreman we took a trip up to the Osage Plant. It was named Osage because the Osage Indian Nation Territorial boundary is directly across the river from the plant. The plant itself actually sat adjacent to the Ponca Indian Tribe just outside of Ponca City. The day we went to the plant, Diana Lucas (later Diana Brien). a Power Plant Electrician and I loaded a special hazardous material containment barrel into the truck and I was given a special suit that I was to wear that would cover me from head to toe while I cleaned up a PCB spill. A smaller plant transformer had been removed from the old plant and there had been a slow leak under it that left a tar like substance on the concrete where the transformer had stood. As Howard, Diana and I approached the plant and I spied it for the first time. This is what I saw:

The old Osage Power Plant

As we drove closer I had a better look at the plant as we drove around the other side:

A closer view of the Osage Plant

It was definitely an old abandoned power plant. We took the barrel out of the back of the truck and hauled it inside on a two wheel dolly (or two-wheel hand truck, as it is often called). When we entered the abandoned plant we walked across the turbine room floor:

The stripped down Turbine Room floor of the Osage Power Plant

I could see where equipment used to stand that had been sold for scrap or stolen by vandals.

When we arrived at the oil spill I was surprised by how small of a spot it was. It couldn’t have been more than one square foot. I put on the rubber suit with it’s rubber hat, rubber boots and a full face respirator and rubber gloves. I took a putty knife and scraped up the tar-like substance and placed it in special bag that had a special seal on it. When I had scraped up the thick stuff, I poured trichloroethane 1.1.1 solvent (which is no longer used due to the dangerous fumes that damaged your liver) on the spot and scrubbed it with a wire brush. Then I took a Scotch Brite pad and scrubbed the floor until the spot was much cleaner than the concrete around it. Everything I had used went into the special barrel. The bags of tar, the Scotch Brite pad, the wire brush the putty knife and the rags I had used to wipe everything up. Then as I took off my suit, every piece of the rubber suit including the full face respirator went into the barrel. Once everything was in the barrel, the special lid was placed on top and it was bolted shut. A Hazardous Waste sticker was placed on the barrel and the time and date and what was in the container was written on it.

Hazardous Waste Barrel

We took the barrel back to the plant and it was placed in a hazardous waste Conex Box that was later buried when it was full of different types of hazardous waste from all over Oklahoma.

A Conex Box

A few years after Howard Chumbley retired, so did Gilbert Schwartz. Gilbert was the Superintendent over the Operators so I didn’t work around Gilbert and I knew very little about him. However, later when I was married and living in Ponca City, I would see him at the Catholic Church in Ponca City where he was a member of the Knights of Columbus. He would nod and say hi whenever he saw me.

Both Howard and Gilbert were in the military. I know that Howard Chumbley was in the Navy during World War II and that Gilbert Schwarz was in the Korean War. Growing up I noticed that older men that had served in the armed forces seemed to have light gray hair. Especially if they had been in the Navy. I don’t know if it’s just a coincidence. Aubrey Cargill was that way also (See the post about Painting Lessons with Aubrey Cargill).

In 1998, Howard Chumbley died unexpectedly when he was admitted to the hospital in Ponca City with a broken arm. The hospital in Ponca City had a bad reputation (or Mortality Rate, as some might say). People didn’t want to go there if there was anyway to avoid it. The hospital in Stillwater was the preferred hospital in this area of Oklahoma.

I only met Dolores Chumbley on two occasions and they were both at Christmas or Award banquets. She seemed the perfect spouse for Howard as she appeared kind and peaceful as well. I’m sure they had a happy life together. I do not have a picture of Howard. I wish I did. His demeanor reminds me of my Mother-In-Law. We have a picture of her in our hallway and the words below the picture says: “Be Kind”. I would say that this is what Howard was all about. Everything about Howard was kindness. I was glad to have known him.

Here Lies Howard Chumbley

This past week on June 24, 2012 Gilbert Schwarz died at the age of 83. He lived a long and happy life as did Howard. There was something about these Power Plant Pioneers that gave them a strange sort of peace.

A Power Plant Pioneer – Gilbert Schwarz

I never found the source of this peace for sure. I suppose it was their long and happy marriages with their loving and supportive wives. Howard had a daughter that he was always very proud to discuss. She was a teacher somewhere close to Tulsa. She recently died of Cancer on January 4. That was 2 days after I wrote my first Power Plant Man post (Why Santa Visits Power Plant Men) at the beginning of this year.

Gilbert never had a child of his own, but his nieces and nephews meant a lot to him throughout his life and he was active in their lives as they grew up. I suppose if the Power Plant Pioneers were anything like the True Power Plant Men of my day, then they found a lot of peace in the friendships that they had with their fellow Power Plant Men locked away behind the Main Gate that they had to drive through each day on the way to work. Once you drive through that gate and enter into the Power Plant Kingdom, there is a certain peace that you feel knowing that what you will do that day will directly affect the lives of millions of people in the state of Oklahoma.

These Pioneers of the early days willingly put themselves at risk working around equipment that did not have the safeties and guards that we have today to supply the electricity to the State. I don’t know there are a few of these brave Pioneers left from the Osage Plant. Gilbert was the last of the older men that I knew about. If you happen to find one of these men some day, don’t miss the opportunity to talk to him. I am sure they would be proud to tell you of the days that they spent being Pioneers of the Power Plant World. You should be able to recognize them. You can pick them out in a crowd. They are the mild peaceful looking old men treating the people around them with respect.

Comments from Previous Post:

  1. Ron Kilman July 3, 2013:

    Thanks! I had not heard of Gilbert’s passing.
    Yes, the old plants had full pressures to the gauges in the control room (throttle, extractions, reheat (if any), even condenser vacuum). The funniest “gauge” I ever saw was at the Byng Power Plant (north of Ada). It was the plant MW output “gauge”. When the control room operator changed load, he would move the dial on the “gauge” (with his hand) and ring a buzzer. The men firing the boilers would hear the buzzer, look through the glass window at the new plant MW output, and change the firing rate on the boilers accordingly!

    1. Plant Electrician July 3, 2013:

      That’s a great story about the MW output gauge! This reminds me of the throttle control on large older ships. The round thing with the handle that the captain would turn to change the speed of the ship. This is really called an “Engine Order Telegraph” that rings a bell when the setting is changed so the Engine room knows to look at the new setting and then does what it takes to make the ship go faster or slower, or even to change from forward to reverse. In the movies it looks like it just happens automatically.

Angel of Death Passes by the Precipitator Door

Originally published on May 25, 2012:

Either this was the luckiest day of my life, or a day where stupidity seemed to be my natural state of mind. This particular day occurred sometime in September 1983. The Main Power transformer for Unit 1 had  shutdown because of an internal fault during an exceptionally hot day during the summer and was being replaced. While the unit was offline, while I was on the labor crew, I was asked to help out the electricians who were doing an overhaul on the Precipitator. The Precipitator takes the ash out of the boiler exhaust before it goes up the smoke stack. Without it, you would see thick smoke, instead, you see only clear exhaust. At the time the electricians I worked with were Sonny Kendrick and Bill Rivers. I had already applied for a job in the electric shop and was waiting to see if I was going to be offered the job. This gave me the chance to show the electricians what a brilliant worker I was.

Bill Rivers told me to go in the precipitator and wipe down the insulators that held the wire racks in place. He showed me where they were. I wore a regular half-face respirator because the fly ash is harmful to inhale.

Half-face respirator

Just before I went in the precipitator door to begin wiping down the insulators using a Scotch Brite Pad, Bill Rivers pointed to my flashlight and said, “Don’t drop your flashlight in a hopper otherwise you will have to make sure that you get it out of the hopper before we go back online.” I told him I would be sure to hold onto my flashlight (noticing that Bill had a string tied to his flashlight which was slung over his shoulder) and I entered the precipitator door.

Yellow Flashlight similar to the one I carried

The inside of the precipitator was dark. 70 foot tall plates are lined up 9 inches apart. Wires hang down between the plates and when the precipitator is turned on, the wires are charged up to around 45,000 volts of electricity. The wires each have a 30 pound weight on the bottom to keep the wires straight, and the wires are kept apart and lined up by a rack at the bottom. One end of the rack which is about 25 feet long is held in place by an electrical insulator about 3 feet long. This is what I was supposed to clean. The light from the flashlight lit up the area around me because everything was covered with the fine white powder reflecting the light.

The first hopper I came to was full of ash up to the top of the hopper, but just below where the insulator was mounted to the edge of the hopper. So, I worked my way down to the ledge along the edge of the hopper and dangled my feet down into the ash as I prepared to wipe down the first of the four insulators on this particular hopper. Just as I began, the precipitator suddenly went dark as my flashlight fell from my hand and down into the hopper. — Oh boy, that didn’t take long.

Fly Ash Hoppers. Our hoppers were 12 foot by 12 foot at the top.

I sat there for a minute in the dark as my eyes grew accustomed to the small amount of light that was coming through the doors. After I could see again, I reached my hand into the ash to feel for my flashlight. The ash was very fluffy and there was little or no resistance as I flailed my hand around searching for it. I leaned over farther and farther to reach down deeper into the ash. I was at the point where I was laying down flat on the ledge trying to find the flashlight, and it was no where to be found.

I pulled myself over to the side edge of the hopper and dropped myself down into the ash so that I could reach over where I had dropped the light, but I was still not able to find it. At that point, I was leaning out into the hopper with only my one index finger gripping the ledge around the hopper. I had a decision to make… I thought I would just bail off into the ash to see if I could find the flashlight, or I could give up and go tell Bill Rivers that I had done the one thing that he told me not to do, and in record time.

I don’t usually like to give up until I have exhausted every effort, so here was my dilemma. Do I let go and dive into this ash to retrieve my flashlight? Or do I leave the hopper and go tell Bill? I regretfully decided to go tell Bill. So, I climbed up out of the hopper, with my clothes covered with Ash (as we did not have fly ash suits at the time and I was wearing my coveralls). I made my way to the precipitator door and once I was outside, I determined which hopper I had been in when I dropped my flashlight.

I found Bill and told him that I had dropped my flashlight in a hopper full of ash. He told me to get the key for that hopper and open the door at the bottom and see if I could find the flashlight. Unlike the picture of the hoppers above, we had a landing around the base of the hoppers by the access door so you didn’t need a ladder to reach them.

Curtis Love had been watching the door of the precipitator for me while I was supposed to be wiping off the insulators. He came down with me, and we proceeded to open the access door at the bottom on the side of the hopper. When I opened the door both Curtis and I were swept backward as a stream of fly ash shot from the door. The ash fell through the grating to the ground below. We regained our footing and watched as a tremendous pile of ash grew below us. If the flashlight had come out of the doorway, it would have remained on the landing since it was too big to go through the grating, but it never came out.

After the ash had finished pouring out of the hopper as if it were water, I reached down into the remaining ash to see if I could feel the flashlight. Still I was unable to find it. There was about 4 more feet from the doorway to the bottom of the hopper, so I emptied out as much ash as I could using my hard hat for a shovel. Then I pulled my body head first into the hopper and I reached down as far as I could in the bottom of the hopper, but I couldn’t find the flashlight.

So, in my infinite wisdom, I asked Curtis Love to hold onto my legs as I lowered myself down to the throat at the bottom of the hopper. I lowered myself down until I had half of my face laying in the ash. At this point only one of the two filters on my respirator was able to function as the other one was down in the ash. I reached my hand into the top of the feeder at the bottom of the hopper and with my finger tips I could just feel the flashlight. I had reached as far as I could, but I couldn’t reach far enough to grip the flashlight.

All of the sudden my head dipped down into the ash and my hand went around the flashlight. I was not able to breathe as my respirator (and my entire head) was entirely immersed in ash. Everything went dark. I struggled to get up, as Curtis had let go of my legs and I had plunged head first into the bottom of the hopper. I had one hand free as the other one held the flashlight. I used it to push against the opposite wall of the hopper to raise my head up out of the ash. I still couldn’t breathe as my respirator was now clogged solid with ash. When I tried to inhale, the respirator just gripped my face tighter. Finally with my one free hand pushing against the hopper wall to hold my head out of the ash, I reached up with the hand that held the flashlight and pushed against my respirator enough to break the seal around my face so that I was able to get a breath of air.

Then I quickly pulled myself out of the precipitator as I heard Curtis saying the mantra that I had heard one other time (as I indicated in the post about Power Plant Safety as Interpreted by Curtis Love). He was saying over and over again, “I’mSorry,I’mSorry, KevinI’mSorry, ThoseGuysWereTicklingMe. I’mSorry,IDidn’tMeanToLetGo,ITriedToHoldOn, butThoseGuysWereTicklingMe.”

Looking around I spied a few Labor Crew hands sneaking away. As this happened before when I was sandblasting in the sand filter tank when Curtis Love had turned off my air, this wasn’t the first encounter I had with Power Plant Men In-Training playing a Power Plant joke on me. I told Curtis to forget it. I had retrieved my flashlight and everything was all right. I was covered from head-to-toe with fly ash, but that washes off pretty easily.

It dawned on me then that when I had dropped the flashlight, it had sunk clear to the bottom of the hopper and down into the throat of the feeder at the bottom. If I had dived into the ash in the hopper from up above, I would have fallen right down to the bottom of the hopper and been engulfed in ash. My feet would have been pinned down in the feeder pipe, and that would have been the end of me. It probably would have taken many hours to figure out where I was, and they would have found only a corpse.

While I was hanging on the edge of the hopper with only the tip of my index finger gripping the ledge, I was actually considering letting go. There never would have been an electrician at the power Plant named Kevin Breazile. I never would have married my wife Kelly, and had my two children Elizabeth and Anthony. I would not be writing this story right now. If it had been left to my own stupidity, none of those things would have happened. I believe it was my guardian angel that had talked me out of letting go (or had actually been standing on my fingers). As stubborn as I was, and against my nature, that day I had decided to give up searching for my flashlight and seek help. That one momentary decision has made all the difference in my life.

Since that day I have had a certain appreciation for the things that happen to me even when they seem difficult at the time. I have lived a fairly stress-free life because each day is a gift. Currently I work in a stress-filled job where individual accomplishments are seldom rewarded. From one day to the next I may be laid off at any time. I still find a lot of satisfaction in what I do because it was possible that it never would have happened. I have been kept alive for a purpose so I might as well enjoy the ride.

I find a special love for the people I work with today, because they are all gifts to me. I try to pay them back with kindness… when that doesn’t work.. I try to annoy them with my presence… Just to say….. — I am still here!

Comments from previous repost:

  1. Dan Antion May 27, 2014

    Scary thought there at the end. Sounds like quick sand.

  2. Ron May 27, 2014

    I’m glad you chose to “give up” on going after a flashlight! There is a Proverb that says “There is a way which seems right to a man, but the end thereof is the way death.” Sounds like you found one of those “ways”. To choose to find your flashlight and lose your life would be the ultimate bad choice. God, give us the wisdom to choose the way of life.

  3. A.D. Everard August 4, 2014

    Wow. So close! You have a book with all these adventures, you really do. I’m enjoying reading these pages very much. I’m so glad you survived to write them!

  4. inmytwisteddreams August 17, 2014

    You are a very good story teller! I was drawn in from the first sentence, and engulfed in your words until the last. Great Story! I mean, not so great at the time, but glad you brought it full circle in the end! I always say, “You must never hesitate” – a simple statement, whose words most might take for granted. As humans, it’s typically against our nature to trust our first (or gut) instinct, but as you know, it is there for a reason! Good story! 🙂

    ~Nikki

Pioneers of Power Plant Fame Finally Find Peace — Repost

originally posted on June 30, 2012:

Somewhere today there is a young man named Cameron Powell whose grandmother has recently died and who has a Great Grandmother named Dolores.  A kind and gentle lady.  If this young man were able to ask his great grandmother about his great grandfather he would hear the tale about a peaceful and kind man that made those who worked with him smile and enjoy their day.  He lived his life in love with Dolores and his daughter and the very people that he worked with each day.  All you had to do was walk in the same room as Howard Chumbley and a smile would come across your face instantly.

You see.  While I was in my first years as a summer help at the Coal Fired Power Plant learning from the True Power Plant men of my day, 15 miles north of the plant along the Arkansas River was another plant.  This plant was being operated by the Power Plant Pioneers of an earlier time.  While we had the latest technological advancements that were available in 1974 when our plant was designed, the Osage plant was using old mechanical instruments that measured actual pressures and temperatures.  What this meant was that when the pressure gauge registered 1000 pounds of pressure, it was because the pipe that was connected to the back or bottom of the gauge had 1000 lbs of pressure on it.  I don’t know.  They may have had a regulator on there that cut the pressure down to a safer range.  That would seem crazy to anyone today to think that behind the Control Panel in the Control Room were pipes that ran from different steam pipes all over the plant to the gauges on the Control board, so that the Control Room operators could operate the plant correctly.

The Power Plant Men that worked in these early Generating Stations were subjected to dangerous chemicals and conditions though it was the best they knew at the time.  Asbestos insulation covered the steam pipes.  Turbine oil with PCBs were used to clean their tools.  Howard Chumbley explained to me one day that they used to wash their tools in Turbine oil up to their elbows in what was now known to contain the dangerous chemical PCB (Polychlorinated Biphenyls).  A funny fact I found out later was that there was a temperature probe in the river just downstream from the plant taking the temperature of the water just like Sooner Plant (See the Post about Power Plant Men Taking the Temperature Down by the River).

When the old Osage Plant closed in the early 1980s, that was when I first learned about it.  This was because some of the pioneer power plant men came to work at our plant.  Howard Chumbley became an Electical foreman and Gilbert Schwarz came to our plant as the superintendent of operations.  Two gray haired men, both with a kind of slow peaceful look on their face.  Howard had a smaller build with soft wavy gray hair.  He could have been a professor at Harvard if you put a pipe in his mouth and a turtleneck sweater.  Of course, that would not have been fitting for Howard. Gilbert was tall and had the look of a cowboy or a farm hand.  I understand that he enjoyed working on the farm.

One year after I became an electrician in November 1984, Howard Chumbley became my foreman.  It was less than a year after that  when Howard retired.  During the short time he was my foreman we took a trip up to the Osage Plant.  It was named Osage because the Osage Indian Nation Territorial boundary is directly across the river from the plant.  The plant itself actually sat adjacent to the Ponca Indian Tribe just outside of Ponca City.  The day we went to the plant, Diana Lucas (later Diana Brien). a Power Plant Electrician and I loaded a special hazardous material containment barrel into the truck and I was given a special suit that I was to wear that would cover me from head to toe while I cleaned up a PCB spill.  A smaller plant transformer had been removed from the old plant and there had been a slow leak under it that left a tar like substance on the concrete where the transformer had stood.  As Howard, Diana and I approached the plant and I spied it for the first time.  This is what I saw:

The old Osage Power Plant

As we drove closer I had a better look at the plant as we drove around the other side:

A closer view of the Osage Plant

It was definitely an old abandoned power plant.  We took the barrel out of the back of the truck and hauled it inside on a two wheel dolly (or two-wheel hand truck, as it is often called).  When we entered the abandoned plant we walked across the turbine room floor:

The stripped down Turbine Room floor of the Osage Power Plant

I could see where equipment used to stand that had been sold for scrap or stolen by vandals.

When we arrived at the oil spill I was surprised by how small of a spot it was.  It couldn’t have been more than one square foot.  I put on the rubber suit with it’s rubber hat, rubber boots and a full face respirator and rubber gloves.  I took a putty knife and scraped up the tar-like substance and placed it in special bag that had a special seal on it.  When I had scraped up the thick stuff, I poured  trichloroethane 1.1.1 solvent (which is no longer used due to the dangerous fumes that damaged your liver) on the spot and scrubbed it with a wire brush.   Then I took a Scotch Brite pad and scrubbed the floor until the spot was much cleaner than the concrete around it.  Everything I had used went into the special barrel.  The bags of tar, the Scotch Brite pad, the wire brush the putty knife and the rags I had used to wipe everything up.  Then as I took off my suit, every piece of the rubber suit including the full face respirator went into the barrel.  Once everything was in the barrel, the special lid was placed on top and it was bolted shut.  A Hazardous Waste sticker was placed on the barrel and the time and date and what was in the container was written on it.

Hazardous Waste Barrel

We took the barrel back to the plant and it was placed in a hazardous waste Conex Box that was later buried when it was full of different types of hazardous waste from all over Oklahoma.

A Conex Box

A few years after Howard Chumbley retired, so did Gilbert Schwartz.  Gilbert was the Superintendent over the Operators so I didn’t work around Gilbert and I knew very little about him.  However, later when I was married and living in Ponca City, I would see him at the Catholic Church in Ponca City where he was a member of the Knights of Columbus. He would nod and say hi whenever he saw me.

Both Howard and Gilbert were in the military.  I know that Howard Chumbley was in the Navy during World War II and that Gilbert Schwarz was in the Korean War.  Growing up I noticed that older men that had served in the armed forces seemed to have light gray hair.  Especially if they had been in the Navy.  I don’t know if it’s just a coincidence.  Aubrey Cargill was that way also (See the post about Painting Lessons with Aubrey Cargill).

In 1998, Howard Chumbley died unexpectedly when he was admitted to the hospital in Ponca City with a broken arm.  The hospital in Ponca City had a bad reputation (or Mortality Rate, as some might say).  People didn’t want to go there if there was anyway to avoid it.  The hospital in Stillwater was the preferred hospital in this area of Oklahoma.

I only met Dolores Chumbley on two occasions and they were both at Christmas or Award banquets.  She seemed the perfect spouse for Howard as she appeared kind and peaceful as well.  I’m sure they had a happy life together.  I do not have a picture of Howard.  I wish I did.  His demeanor reminds me of my Mother-In-Law.  We have a picture of her in our hallway and the words below the picture says:  “Be Kind”.  I would say that this is what Howard was all about.  Everything about Howard was kindness.  I was glad to have known him.

Here Lies Howard Chumbley

This past week on June 24, 2012 Gilbert Schwarz died at the age of 83.  He lived a long and happy life as did Howard.  There was something about these Power Plant Pioneers that gave them a strange sort of peace.

A Power Plant Pioneer – Gilbert Schwarz

I never found the source of this peace for sure.  I suppose it was their long and happy marriages with their loving and supportive wives.  Howard had a daughter that he was always very proud to discuss.  She was a teacher somewhere close to Tulsa.  She recently died of Cancer on January 4.  That was 2 days after I wrote my first Power Plant Man post (Why Santa Visits Power Plant Men) at the beginning of this year.

Gilbert never had a child of his own, but his nieces and nephews meant a lot to him throughout his life and he was active in their lives as they grew up.  I suppose if the Power Plant Pioneers were anything like the True Power Plant Men of my day, then they found a lot of peace in the friendships that they had with their fellow Power Plant Men locked away behind the Main Gate that they had to drive through each day on the way to work.  Once you drive through that gate and enter into the Power Plant Kingdom, there is a certain peace that you feel knowing that what you will do that day will directly affect the lives of millions of people in the state of Oklahoma.

These Pioneers of the early days willingly put themselves at risk working around equipment that did not have the safeties and guards that we have today to supply the electricity to the State.  I don’t know there are a few of these brave Pioneers left from the Osage Plant.  Gilbert was the last of the older men that I knew about.  If you happen to find one of these men some day, don’t miss the opportunity to talk to him.  I am sure they would be proud to tell you of the days that they spent being Pioneers of the Power Plant World.  You should be able to recognize them.  You can pick them out in a crowd.  They are the mild peaceful looking old men treating the people around them with respect.

Comments from Previous Post:

  1. Ron Kilman July 3, 2013:

    Thanks! I had not heard of Gilbert’s passing.
    Yes, the old plants had full pressures to the gauges in the control room (throttle, extractions, reheat (if any), even condenser vacuum). The funniest “gauge” I ever saw was at the Byng Power Plant (north of Ada). It was the plant MW output “gauge”. When the control room operator changed load, he would move the dial on the “gauge” (with his hand) and ring a buzzer. The men firing the boilers would hear the buzzer, look through the glass window at the new plant MW output, and change the firing rate on the boilers accordingly!

    1. Plant Electrician July 3, 2013:

      That’s a great story about the MW output gauge! This reminds me of the throttle control on large older ships. The round thing with the handle that the captain would turn to change the speed of the ship. This is really called an “Engine Order Telegraph” that rings a bell when the setting is changed so the Engine room knows to look at the new setting and then does what it takes to make the ship go faster or slower, or even to change from forward to reverse. In the movies it looks like it just happens automatically.

Angel of Death Passes by the Precipitator Door — Repost

Originally published on May 25, 2012:

Either this was the luckiest day of my life, or a day where stupidity seemed to be my natural state of mind. This particular day occurred sometime in September 1983. The Main Power transformer for Unit 1 had  shutdown because of an internal fault during an exceptionally hot day during the summer and was being replaced. While the unit was offline, while I was on the labor crew, I was asked to help out the electricians who were doing an overhaul on the Precipitator. The Precipitator takes the ash out of the boiler exhaust before it goes up the smoke stack. Without it, you would see thick smoke, instead, you see only clear exhaust. At the time the electricians I worked with were Sonny Kendrick and Bill Rivers. I had already applied for a job in the electric shop and was waiting to see if I was going to be offered the job. This gave me the chance to show the electricians what a brilliant worker I was.

Bill Rivers told me to go in the precipitator and wipe down the insulators that held the wire racks in place. He showed me where they were. I wore a regular half-face respirator because the fly ash is harmful to inhale.

Half-face respirator

Just before I went in the precipitator door to begin wiping down the insulators using a Scotch Brite Pad, Bill Rivers pointed to my flashlight and said, “Don’t drop your flashlight in a hopper otherwise you will have to make sure that you get it out of the hopper before we go back online.” I told him I would be sure to hold onto my flashlight (noticing that Bill had a string tied to his flashlight which was slung over his shoulder) and I entered the precipitator door.

Yellow Flashlight similar to the one I carried

The inside of the precipitator was dark. 70 foot tall plates are lined up 9 inches apart. Wires hang down between the plates and when the precipitator is turned on, the wires are charged up to around 45,000 volts of electricity. The wires each have a 30 pound weight on the bottom to take out the tension, and the wires are kept apart and lined up by a rack at the bottom. One end of the rack which is about 25 feet long is held in place by an electrical insulator about 3 feet long. This is what I was supposed to clean. The light from the flashlight lit up the area around me because everything was covered with the fine white powder reflecting the light.

The first hopper I came to was full of ash up to the top of the hopper, but just below where the insulator was mounted to the edge of the hopper. So, I worked my way down to the ledge along the edge of the hopper and dangled my feet down into the ash as I prepared to wipe down the first of the four insulators on this particular hopper. Just as I began, the precipitator suddenly went dark as my flashlight fell from my hand and down into the hopper. — Oh boy, that didn’t take long.

Fly Ash Hoppers. Our hoppers were 12 foot by 12 foot at the top.

I sat there for a minute in the dark as my eyes grew accustomed to the small amount of light that was coming through the doors. After I could see again, I reached my hand into the ash to feel for my flashlight. The ash was very fluffy and there was little or no resistance as I flailed my hand around searching for it. I leaned over farther and farther to reach down deeper into the ash. I was at the point where I was laying down flat on the ledge trying to find the flashlight, and it was no where to be found.

I pulled myself over to the side edge of the hopper and dropped myself down into the ash so that I could reach over where I had dropped the light, but I was still not able to find it. At that point, I was leaning out into the hopper with only my one index finger gripping the ledge around the hopper. I had a decision to make… I thought I would just bail off into the ash to see if I could find the flashlight, or I could give up and go tell Bill Rivers that I had done the one thing that he told me not to do, and in record time. I don’t usually like to give up until I have exhausted every effort, so here was my dilemma. Do I let go and dive into this ash to retrieve my flashlight? Or do I leave the hopper and go tell Bill? I regretfully decided to go tell Bill. So, I climbed up out of the hopper, with my clothes covered with Ash (as we did not have fly ash suits at the time and I was wearing my coveralls). I made my way to the precipitator door and once I was outside, I determined which hopper I had been in when I dropped my flashlight.

I found Bill and told him that I had dropped my flashlight in a hopper full of ash. He told me to get the key for that hopper and open the door at the bottom and see if I could find the flashlight. Unlike the picture of the hoppers above, we had a landing around the base of the hoppers by the access door so you didn’t need a ladder to reach them.

Curtis Love had been watching the door of the precipitator for me while I was supposed to be wiping off the insulators. He came down with me, and we proceeded to open the access door at the bottom on the side of the hopper. When I opened the door both Curtis and I were swept backward as a stream of fly ash shot from the door. The ash fell through the grating to the ground below. We regained our footing and watched as a tremendous pile of ash grew below us. If the flashlight had come out of the doorway, it would have remained on the landing since it was too big to go through the grating, but it never came out.

After the ash had finished pouring out of the hopper as if it were water, I reached down into the remaining ash to see if I could feel the flashlight. Still I was unable to find it. There was about 4 more feet from the doorway to the bottom of the hopper, so I emptied out as much ash as I could using my hard hat for a shovel. Then I pulled my body head first into the hopper and I reached down as far as I could in the bottom of the hopper, but I couldn’t find the flashlight.

So, in my infinite wisdom, I asked Curtis Love to hold onto my legs as I lowered myself down to the throat at the bottom of the hopper. I lowered myself down until I had half of my face laying in the ash. At this point only one of the two filters on my respirator was able to function as the other one was down in the ash. I reached my hand into the top of the feeder at the bottom of the hopper and with my finger tips I could just feel the flashlight. I had reached as far as I could, but I couldn’t reach far enough to grip the flashlight.

All of the sudden my head dipped down into the ash and my hand went around the flashlight. I was not able to breathe as my respirator (and my entire head) was entirely immersed in ash. Everything went dark. I struggled to get up, as Curtis had let go of my legs and I had plunged head first into the bottom of the hopper. I had one hand free as the other one held the flashlight. I used it to push against the opposite wall of the hopper to raise my head up out of the ash. I still couldn’t breathe as my respirator was now clogged solid with ash. When I tried to inhale, the respirator just gripped my face tighter. Finally with my one free hand pushing against the hopper wall to hold my head out of the ash, I reached up with the hand that held the flashlight and pushed against my respirator enough to break the seal around my face so that I was able to get a breath of air.

Then I quickly pulled myself out of the precipitator as I heard Curtis saying the mantra that I had heard one other time (as I indicated in the post about Power Plant Safety as Interpreted by Curtis Love). He was saying over and over again, “I’mSorry,I’mSorry, KevinI’mSorry, ThoseGuysWereTicklingMe. I’mSorry,IDidn’tMeanToLetGo,ITriedToHoldOn, butThoseGuysWereTicklingMe.”

Looking around I spied a few Labor Crew hands sneaking away. As this happened before when I was sandblasting in the sand filter tank when Curtis Love had turned off my air, this wasn’t the first encounter I had with Power Plant Men In-Training playing a Power Plant joke on me. I told Curtis to forget it. I had retrieved my flashlight and everything was all right. I was covered from head-to-toe with fly ash, but that washes off pretty easily.

It dawned on me then that when I had dropped the flashlight, it had sunk clear to the bottom of the hopper and down into the throat of the feeder at the bottom. If I had dived into the ash in the hopper from up above, I would have fallen right down to the bottom of the hopper and been engulfed in ash. My feet would have been pinned down in the feeder pipe, and that would have been the end of me. It probably would have taken many hours to figure out where I was, and they would have found only a corpse.

While I was hanging on the edge of the hopper with only the tip of my index finger gripping the ledge, I was actually considering letting go. There never would have been an electrician at the power Plant named Kevin Breazile. I never would have married my wife Kelly, and had my two children Elizabeth and Anthony. I would not be writing this story right now. If it had been left to my own stupidity, none of those things would have happened. I believe it was my guardian angel that had talked me out of letting go (or had actually been standing on my fingers). As stubborn as I was, and against my nature, that day I had decided to give up searching for my flashlight and seek help. That one momentary decision has made all the difference in my life.

Since that day I have had a certain appreciation for the things that happen to me even when they seem difficult at the time. I have lived a fairly stress-free life because each day is a gift. Currently I work in a stress-filled job where individual accomplishments are seldom rewarded. From one day to the next I may be laid off at any time. I still find a lot of satisfaction in what I do because it was possible that it never would have happened. I have been kept alive for a purpose so I might as well enjoy the ride.

I find a special love for the people I work with today, because they are all gifts to me. I try to pay them back with kindness… when that doesn’t work.. I try to annoy them with my presence… Just to say….. — I am still here!

Pioneers of Power Plant Fame Finally Find Peace — Repost

original posted on June 30, 2012:

Somewhere today there is a young man named Cameron Powell whose grandmother has recently died and who has a Great Grandmother named Dolores.  A kind and gentle lady.  If this young man were able to ask his great grandmother about his great grandfather he would hear the tale about a peaceful and kind man that made those who worked with him smile and enjoy their day.  He lived his life in love with Dolores and his daughter and the very people that he worked with each day.  All you had to do was walk in the same room as Howard Chumbley and a smile would come across your face instantly.

You see.  While I was in my first years as a summer help at the Coal Fired Power Plant learning from the True Power Plant men of my day, 15 miles north of the plant along the Arkansas River was another plant.  This plant was being operated by the Power Plant Pioneers of an earlier time.  While we had the latest technological advancements that were available in 1974 when our plant was designed, the Osage plant was using old mechanical instruments that measured actual pressures and temperatures.  What this meant was that when the pressure gauge registered 1000 pounds of pressure, it was because the pipe that was connected to the back or bottom of the gauge had 1000 lbs of pressure on it.  I don’t know.  They may have had a regulator on there that cut the pressure down to a safer range.  That would seem crazy to anyone today to think that behind the Control Panel in the Control Room were pipes that ran from different steam pipes all over the plant to the gauges on the Control board, so that the Control Room operators could operate the plant correctly.

The Power Plant Men that worked in these early Generating Stations were subjected to dangerous chemicals and conditions though it was the best they knew at the time.  Asbestos insulation covered the steam pipes.  Turbine oil with PCBs were used to clean their tools.  Howard Chumbley explained to me one day that they used to wash their tools in Turbine oil up to their elbows in what was now known to contain the dangerous chemical PCB (Polychlorinated Biphenyls).  A funny fact I found out later was that there was a temperature probe in the river just downstream from the plant taking the temperature of the water just like Sooner Plant (See the Post about Power Plant Men Taking the Temperature Down by the River).

When the old Osage Plant closed in the early 1980s, that was when I first learned about it.  This was because some of the pioneer power plant men came to work at our plant.  Howard Chumbley became an Electical foreman and Gilbert Schwarz came to our plant as the superintendent of operations.  Two gray haired men, both with a kind of slow peaceful look on their face.  Howard had a smaller build with soft wavy gray hair.  He could have been a professor at Harvard if you put a pipe in his mouth and a turtleneck sweater.  Of course, that would not have been fitting for Howard. Gilbert was tall and had the look of a cowboy or a farm hand.  I understand that he enjoyed working on the farm.

One year after I became an electrician in November 1984, Howard Chumbley became my foreman.  It was less than a year after that  when Howard retired.  During the short time he was my foreman we took a trip up to the Osage Plant.  It was named Osage because the Osage Indian Nation Territorial boundary is directly across the river from the plant.  The plant itself actually sat adjacent to the Ponca Indian Tribe just outside of Ponca City.  The day we went to the plant, Diana Lucas (later Diana Brien). a Power Plant Electrician and I loaded a special hazardous material containment barrel into the truck and I was given a special suit that I was to wear that would cover me from head to toe while I cleaned up a PCB spill.  A smaller plant transformer had been removed from the old plant and there had been a slow leak under it that left a tar like substance on the concrete where the transformer had stood.  As Howard, Diana and I approached the plant and I spied it for the first time.  This is what I saw:

The old Osage Power Plant

As we drove closer I had a better look at the plant as we drove around the other side:

A closer view of the Osage Plant

It was definitely an old abandoned power plant.  We took the barrel out of the back of the truck and hauled it inside on a two wheel dolly (or two-wheel hand truck, as it is often called).  When we entered the abandoned plant we walked across the turbine room floor:

The stripped down Turbine Room floor of the Osage Power Plant

I could see where equipment used to stand that had been sold for scrap or stolen by vandals.

When we arrived at the oil spill I was surprised by how small of a spot it was.  It couldn’t have been more than one square foot.  I put on the rubber suit with it’s rubber hat, rubber boots and a full face respirator and rubber gloves.  I took a putty knife and scraped up the tar-like substance and placed it in special bag that had a special seal on it.  When I had scraped up the thick stuff, I poured  trichloroethane 1.1.1 solvent (which is no longer used due to the dangerous fumes that damaged your liver) on the spot and scrubbed it with a wire brush.   Then I took a Scotch Brite pad and scrubbed the floor until the spot was much cleaner than the concrete around it.  Everything I had used went into the special barrel.  The bags of tar, the Scotch Brite pad, the wire brush the putty knife and the rags I had used to wipe everything up.  Then as I took off my suit, every piece of the rubber suit including the full face respirator went into the barrel.  Once everything was in the barrel, the special lid was placed on top and it was bolted shut.  A Hazardous Waste sticker was placed on the barrel and the time and date and what was in the container was written on it.

Hazardous Waste Barrel

We took the barrel back to the plant and it was placed in a hazardous waste Conex Box that was later buried when it was full of different types of hazardous waste from all over Oklahoma.

A Conex Box

A few years after Howard Chumbley retired, so did Gilbert Schwartz.  Gilbert was the Superintendent over the Operators so I didn’t work around Gilbert and I knew very little about him.  However, later when I was married and living in Ponca City, I would see him at the Catholic Church in Ponca City where he was a member of the Knights of Columbus. He would nod and say hi whenever he saw me.

Both Howard and Gilbert were in the military.  I know that Howard Chumbley was in the Navy during World War II and that Gilbert Schwarz was in the Korean War.  Growing up I noticed that older men that had served in the armed forces seemed to have light gray hair.  Especially if they had been in the Navy.  I don’t know if it’s just a coincidence.  Aubrey Cargill was that way also (See the post about Painting Lessons with Aubrey Cargill).

In 1998, Howard Chumbley died unexpectedly when he was admitted to the hospital in Ponca City with a broken arm.  The hospital in Ponca City had a bad reputation (or Mortality Rate, as some might say).  People didn’t want to go there if there was anyway to avoid it.  The hospital in Stillwater was the preferred hospital in this area of Oklahoma.

I only met Dolores Chumbley on two occasions and they were both at Christmas or Award banquets.  She seemed the perfect spouse for Howard as she appeared kind and peaceful as well.  I’m sure they had a happy life together.  I do not have a picture of Howard.  I wish I did.  His demeanor reminds me of my Mother-In-Law.  We have a picture of her in our hallway and the words below the picture says:  “Be Kind”.  I would say that this is what Howard was all about.  Everything about Howard was kindness.  I was glad to have known him.

Here Lies Howard Chumbley

This past week on June 24, 2012 Gilbert Schwarz died at the age of 83.  He lived a long and happy life as did Howard.  There was something about these Power Plant Pioneers that gave them a strange sort of peace.

A Power Plant Pioneer – Gilbert Schwarz

I never found the source of this peace for sure.  I suppose it was their long and happy marriages with their loving and supportive wives.  Howard had a daughter that he was always very proud to discuss.  She was a teacher somewhere close to Tulsa.  She recently died of Cancer on January 4.  That was 2 days after I wrote my first Power Plant Man post (Why Santa Visits Power Plant Men) at the beginning of this year.

Gilbert never had a child of his own, but his nieces and nephews meant a lot to him throughout his life and he was active in their lives as they grew up.  I suppose if the Power Plant Pioneers were anything like the True Power Plant Men of my day, then they found a lot of peace in the friendships that they had with their fellow Power Plant Men locked away behind the Main Gate that they had to drive through each day on the way to work.  Once you drive through that gate and enter into the Power Plant Kingdom, there is a certain peace that you feel knowing that what you will do that day will directly affect the lives of millions of people in the state of Oklahoma.

These Pioneers of the early days willingly put themselves at risk working around equipment that did not have the safeties and guards that we have today to supply the electricity to the State.  I don’t know there are a few of these brave Pioneers left from the Osage Plant.  Gilbert was the last of the older men that I knew about.  If you happen to find one of these men some day, don’t miss the opportunity to talk to him.  I am sure they would be proud to tell you of the days that they spent being Pioneers of the Power Plant World.  You should be able to recognize them.  You can pick them out in a crowd.  They are the mild peaceful looking old men treating the people around them with respect.

Angel of Death Passes by the Precipitator Door — Repost

Originally published on May 25, 2012:

Either this was the luckiest day of my life, or a day where stupidity seemed to be my natural state of mind. This particular day occurred sometime in September 1983. The Main Power transformer for Unit 1 had  shutdown because of an internal fault during an exceptionally hot day during the summer and was being replaced. While the unit was offline, while I was on the labor crew, I was asked to help out the electricians who were doing an overhaul on the Precipitator. The Precipitator takes the ash out of the boiler exhaust before it goes up the smoke stack. Without it, you would see thick smoke, instead, you see only clear exhaust. At the time the electricians I worked with were Sonny Kendrick and Bill Rivers. I had already applied for a job in the electric shop and was waiting to see if I was going to be offered the job. This gave me the chance to show the electricians what a brilliant worker I was.

Bill Rivers told me to go in the precipitator and wipe down the insulators that held the wire racks in place. He showed me where they were. I wore a regular half-face respirator because the fly ash is harmful to inhale.

Half-face respirator

Just before I went in the precipitator door to begin wiping down the insulators using a Scotch Brite Pad, Bill Rivers pointed to my flashlight and said, “Don’t drop your flashlight in a hopper otherwise you will have to make sure that you get it out of the hopper before we go back online.” I told him I would be sure to hold onto my flashlight (noticing that Bill had a string tied to his flashlight which was slung over his shoulder) and I entered the precipitator door.

Yellow Flashlight similar to the one I carried

The inside of the precipitator was dark. 70 foot tall plates are lined up 9 inches apart. Wires hang down between the plates and when the precipitator is turned on, the wires are charged up to around 45,000 volts of electricity. The wires each have a 30 pound weight on the bottom to take out the tension, and the wires are kept apart and lined up by a rack at the bottom. One end of the rack which is about 25 feet long is held in place by an electrical insulator about 3 feet long. This is what I was supposed to clean. The light from the flashlight lit up the area around me because everything was covered with the fine white powder reflecting the light.

The first hopper I came to was full of ash up to the top of the hopper, but just below where the insulator was mounted to the edge of the hopper. So, I worked my way down to the ledge along the edge of the hopper and dangled my feet down into the ash as I prepared to wipe down the first of the four insulators on this particular hopper. Just as I began, the precipitator suddenly went dark as my flashlight fell from my hand and down into the hopper. — Oh boy, that didn’t take long.

Fly Ash Hoppers. Our hoppers were 12 foot by 12 foot at the top.

I sat there for a minute in the dark as my eyes grew accustomed to the small amount of light that was coming through the doors. After I could see again, I reached my hand into the ash to feel for my flashlight. The ash was very fluffy and there was little or no resistance as I flailed my hand around searching for it. I leaned over farther and farther to reach down deeper into the ash. I was at the point where I was laying down flat on the ledge trying to find the flashlight, and it was no where to be found.

I pulled myself over to the side edge of the hopper and dropped myself down into the ash so that I could reach over where I had dropped the light, but I was still not able to find it. At that point, I was leaning out into the hopper with only my one index finger gripping the ledge around the hopper. I had a decision to make… I thought I would just bail off into the ash to see if I could find the flashlight, or I could give up and go tell Bill Rivers that I had done the one thing that he told me not to do, and in record time. I don’t usually like to give up until I have exhausted every effort, so here was my dilemma. Do I let go and dive into this ash to retrieve my flashlight? Or do I leave the hopper and go tell Bill? I regretfully decided to go tell Bill. So, I climbed up out of the hopper, with my clothes covered with Ash (as we did not have fly ash suits at the time and I was wearing my coveralls). I made my way to the precipitator door and once I was outside, I determined which hopper I had been in when I dropped my flashlight.

I found Bill and told him that I had dropped my flashlight in a hopper full of ash. He told me to get the key for that hopper and open the door at the bottom and see if I could find the flashlight. Unlike the picture of the hoppers above, we had a landing around the base of the hoppers by the access door so you didn’t need a ladder to reach them.

Curtis Love had been watching the door of the precipitator for me while I was supposed to be wiping off the insulators. He came down with me, and we proceeded to open the access door at the bottom on the side of the hopper. When I opened the door both Curtis and I were swept backward as a stream of fly ash shot from the door. The ash fell through the grating to the ground below. We regained our footing and watched as a tremendous pile of ash grew below us. If the flashlight had come out of the doorway, it would have remained on the landing since it was too big to go through the grating, but it never came out.

After the ash had finished pouring out of the hopper as if it were water, I reached down into the remaining ash to see if I could feel the flashlight. Still I was unable to find it. There was about 4 more feet from the doorway to the bottom of the hopper, so I emptied out as much ash as I could using my hard hat for a shovel. Then I pulled my body head first into the hopper and I reached down as far as I could in the bottom of the hopper, but I couldn’t find the flashlight.

So, in my infinite wisdom, I asked Curtis Love to hold onto my legs as I lowered myself down to the throat at the bottom of the hopper. I lowered myself down until I had half of my face laying in the ash. At this point only one of the two filters on my respirator was able to function as the other one was down in the ash. I reached my hand into the top of the feeder at the bottom of the hopper and with my finger tips I could just feel the flashlight. I had reached as far as I could, but I couldn’t reach far enough to grip the flashlight.

All of the sudden my head dipped down into the ash and my hand went around the flashlight. I was not able to breathe as my respirator (and my entire head) was entirely immersed in ash. Everything went dark. I struggled to get up, as Curtis had let go of my legs and I had plunged head first into the bottom of the hopper. I had one hand free as the other one held the flashlight. I used it to push against the opposite wall of the hopper to raise my head up out of the ash. I still couldn’t breathe as my respirator was now clogged solid with ash. When I tried to inhale, the respirator just gripped my face tighter. Finally with my one free hand pushing against the hopper wall to hold my head out of the ash, I reached up with the hand that held the flashlight and pushed against my respirator enough to break the seal around my face so that I was able to get a breath of air.

Then I quickly pulled myself out of the precipitator as I heard Curtis saying the mantra that I had heard one other time (as I indicated in the post about Power Plant Safety as Interpreted by Curtis Love). He was saying over and over again, “I’mSorry,I’mSorry, KevinI’mSorry, ThoseGuysWereTicklingMe. I’mSorry,IDidn’tMeanToLetGo,ITriedToHoldOn, butThoseGuysWereTicklingMe.”

Looking around I spied a few Labor Crew hands sneaking away. As this happened before when I was sandblasting in the sand filter tank when Curtis Love had turned off my air, this wasn’t the first encounter I had with Power Plant Men In-Training playing a Power Plant joke on me. I told Curtis to forget it. I had retrieved my flashlight and everything was all right. I was covered from head-to-toe with fly ash, but that washes off pretty easily.

It dawned on me then that when I had dropped the flashlight, it had sunk clear to the bottom of the hopper and down into the throat of the feeder at the bottom. If I had dived into the ash in the hopper from up above, I would have fallen right down to the bottom of the hopper and been engulfed in ash. My feet would have been pinned down in the feeder pipe, and that would have been the end of me. It probably would have taken many hours to figure out where I was, and they would have found only a corpse.

While I was hanging on the edge of the hopper with only the tip of my index finger gripping the ledge, I was actually considering letting go. There never would have been an electrician at the power Plant named Kevin Breazile. I never would have married my wife Kelly, and had my two children Elizabeth and Anthony. I would not be writing this story right now. If it had been left to my own stupidity, none of those things would have happened. I believe it was my guardian angel that had talked me out of letting go (or had actually been standing on my fingers). As stubborn as I was, and against my nature, that day I had decided to give up searching for my flashlight and seek help. That one momentary decision has made all the difference in my life.

Since that day I have had a certain appreciation for the things that happen to me even when they seem difficult at the time. I have lived a fairly stress-free life because each day is a gift. Currently I work in a stress-filled job where individual accomplishments are seldom rewarded. From one day to the next I may be laid off at any time. I still find a lot of satisfaction in what I do because it was possible that it never would have happened. I have been kept alive for a purpose so I might as well enjoy the ride.

I find a special love for the people I work with today, because they are all gifts to me. I try to pay them back with kindness… when that doesn’t work.. I try to annoy them with my presence… Just to say….. — I am still here!