Originally Posted on June 8, 2012. Added comments from the past 2 years:
Lawrence Hayes was the foreman over the machinists when I first arrived at the power plant, but Ray Butler was undoubtedly the Chief. He was actually the Chief of the Otoe-Missouri Indian tribe, for a time, that was located just to the north and west of the plant grounds. The Machinists I can remember from the first summer is Don Burnett, Johnnie Keys, Ray Butler and Lawrence Hayes. Being a Machinist in a power plant is something that few people can pull off, but those that do, can create just about any metal part that is needed in the plant.
The machinists fascinated me when I first arrived at the plant in 1979 as a summer help. One side of the entire maintenance shop was the machine shop and it was filled with all different kinds of machining equipment. I recognized some of the equipment like the lathes, but other machines, like the mill, were something new. Then there is this very large lathe. It was monstrous. I wondered what kind of part would be machined with that big lathe.
Even though the power plant machinists came from very diverse backgrounds, they all have two important traits in common. They are very patient and they are perfectionists. During my first summer as a summer help both of the units were still under construction and the mechanics were busy going through the entire plant disassembling each piece of equipment and measuring it and cleaning it and putting it back together. This was called: “Check Out”.
Often they would find something that didn’t meet the Electric Companies specifications, so it would be sent to the machinist to fix. Very precise measurements were being used, and if there was a 3 thousandth inch gap (.003), and the company wanted it to be no more than 2 thousandths of an inch (.002)…. then it was the job of the machinist to add a sleeve and machine the part down until it was precisely where it was supposed to be.
I learned very little about the lives of the machinists because they were always standing behind the lathes watching vigilantly as the metal shavings were flying off of the parts, but I did learn a few things about some of them. First of all, each one of the machinists seemed to care about you right away. Don Burnett, a tall and very thin man with a friendly face, worked in a Zinc Smelting plant before he had come to work at the power plant. One time while he was working there, some molten zinc was accidentally poured down the back of his boot burning his heel. It was then that he decided that he would start looking for a different line of work. I went fishing with him and some other guys once, where he told me some more things about his life. Then a few years later, he moved to the Power Plant in Muskogee Oklahoma, where I saw him a couple of times while on overhaul down there.
Johnnie Keys would be perfectly cast as a hillbilly. He had a scruffy beard (this was before beards were no longer allowed in 1983 due to the problem with obtaining a seal on your respirator) and if you put an old leather hat on him, he would look like this:
When you ask Johnnie to create something for you, you can be sure that he will do the best he can. One time years later when I was an electrician, I asked Johnnie if he could take a piece of plexiglass and cut out 8 rectangles in it so that I could mount it in an electrical box so that a bunch of breakers could be accessed, without someone worrying about getting into the electricity. This is the control box that was used for the vent fans that were installed around the turbine room floor. As far as I know, it is still there today. Anyway, Johnnie brought it back to the electric shop when he was finished and it was perfect. He had a couple of holes in it so that I could put two standoffs to mount the plexiglass in the box.
It just so happened that Leroy Godfrey the electrical supervisor was in the middle of a little war with the engineers because they hadn’t consulted him about the project, and so he was intent on making the job go way over budget. I wasn’t exactly privy to this information at the time (or maybe I was). Anyway, after I had mounted the plexiglass to the back plate of the electric box using the standoffs, and it was sitting on the workbench, Leroy came up to me and looked at it.
He said right away, “Go have the machinists put some more holes in it so that you can add more standoffs to mount the plexiglass. Knowing full well that it didn’t need the extra mounting, I told Leroy that I believed that two standoffs will be fine because the entire assembly was going to be put in the electric box, where there wasn’t going to be much movement.
At that point I picked up the entire assembly with the breakers and all by the plexiglass and bent the plexiglass all the way around to where both ends were touching and shook the breakers up and down. Then I put it back on the workbench and said, “I am not going to tell the machinist to add more holes, this is perfect.”
I knew that Johnnie had worked very meticulously machining out the plexiglass and I wasn’t going to bother him with meaningless revisions. It was at that point where Leroy Godfrey decided that I must go. He went into the office and told Bill Bennett that he wanted to fire me. Bill Bennett calmed him down, and it wasn’t long after that Leroy and the other old school power plant men were early retired.
Lawrence Hayes was the foreman during my first summer at the plant and I remember one morning while he was working on the lathe next to the foremen’s office. He had a disturbed look on his face about something as he had a long metal rod in the lathe and was busy measuring it from different angles. A little while later when I was passing by on the way to the tool room, Lawrence had Marlin McDaniel, the A Foreman out there and he was showing him something about the lathe.
Then some time just after lunch, Lawrence had a big wrench and was removing the mounting bolts from the Lathe, and later picked the entire thing up with the shop overhead crane and moved it down to the other end of the shop. Over the next couple of days, the concrete where the lathe had been mounted was busted up and removed, and then re-poured, so that the mounting bolts were now properly aligned. The enormity of this job made me realize that when these Power Plant Men knew what needed to be done to fix something, they went right ahead and did it, no matter how big the job was.
I have saved the Chief until last. Ray Butler as I mentioned above was the Chief of the Otoe-Missouria India tribe. They really called him “Chairman”, but I think I knew what the title really meant.
As Ray Butler sat at a lathe or a mill working on a piece of metal, he always had the same expression. His head was slightly tilted up so that he could see through the bottom of his bifocals and he had the most satisfied expression. He looked as if he was watching a work of art being created before his eyes.
It didn’t matter what he was working on, he always had the same expression. I mentioned above that the machinists (like all true power plant men), seemed to instantly care about you. This seemed to be especially true with Ray Butler. He was almost 7 years older than my own father. He treated me as one of his sons.
When I had been at the plant three days of my third year as a summer help in 1981, on Wednesday May 13, I went to the break room to eat my lunch. Ray came up to me and sat down across from me at the table. He looked at me solemnly and told me that Pope John Paul II had just been shot. He had heard it on the radio and knew that I was Catholic. He said that was all that he knew other than that they had taken him to the hospital. I could see his concern when he told me this, and I could see that he was equally concerned that this holy man across the ocean had been shot. I thanked him for letting me know.
Ray had served in the Navy during World War II and besides the time he spent in the Navy he spent most of his life from the time he was born until his death in 2007 in Oklahoma. He was born and died in Red Rock just a few miles from where the power plant was built. He went to high school in Pawnee. Even though I have seen him upset at times, he was always a man at peace.
Ray retired in 1988 and the day that he left I met him on his way to the control room while I was on my way to the maintenance shop. I told him that I wished him well on his retirement and I gave him a hug. I didn’t see him again until a few years later when we had stopped by the Indian Reservation convenience store to buy gas for the company truck and when he saw me he came out to say hello and it was like meeting a close friend. He gave me a hug and I got back in the truck and we left. That was the last time I saw Ray Butler, but I know that if I wanted to visit with him again, I could just go take a stroll around the Pow-wow area of the Otoe-Missouria Reservation and he would not be far away.
Comment from the original Post:
The old machinists I knew were a special breed; they were the High Priests of any shop where they were present…they started disappearing in favor of cheaper (and much less capable) machine operators when the computer-controlled production machines came in. After that, if you wanted a machinist, you’d likely have to import him; Americans didn’t seem to train for it anymore. I’ve always thought that a shame and a loss of something special that was important in making our industrial history…and a loss of a very interesting and accomplished breed of men. Thanks for resurrecting some of them!
Comments from first Repost:
Good story, Kevin!
I worked in 5 power plants in Oklahoma and I was constantly amazed by what the Machinists could do.
Great Story, I remember the machinist from the plant where I started was EXACTLY as you describe, his name was Don Rogers and he was both, one of the most talented and kindest men I’ve ever met in my power plant career. I don’t remember every name from back then, but if you met Don, he left a great impression that was impossible to forget.